Fossil

#### We sometimes add the -static option here so that we can build a
#    static executable that will run in a chroot jail.
#LIB = -static
TCC += -DFOSSIL_DYNAMIC_BUILD=1

TCCFLAGS = $(CFLAGS)

# We don't attempt to use libedit or libreadline in this simplified
# build system (contrast auto.def and Makefile.in) so use the included
# copy of linenoise.  MinGW can't make use of this, but linenoise is
# ifdef'd out elsewhere for that platform.  Note that this is a make
# flag handled in src/main.mk, not a C preprocessor flag.
USE_LINENOISE := 1

#### Extra arguments for linking the finished binary.  Fossil needs
#    to link against the Z-Lib compression library unless the miniz
#    library in the source tree is being used.  There are no other
#    required dependencies.
ZLIB_LIB.0 = -lz
ZLIB_LIB.1 =
ZLIB_LIB.  = $(ZLIB_LIB.0)
................................................................................

# If using zlib:
LIB += $(ZLIB_LIB.$(FOSSIL_ENABLE_MINIZ)) $(LDFLAGS)

# If using HTTPS:
LIB += -lcrypto -lssl

# Many platforms put cos() needed by src/piechart.c in libm, rather than
# in libc.  We cannot enable this by default because libm doesn't exist
# everywhere.
#LIB += -lm

#### Tcl shell for use in running the fossil testsuite.  If you do not
#    care about testing the end result, this can be blank.
#
TCLSH = tclsh

# You should not need to change anything below this line
###############################################################################

#### We sometimes add the -static option here so that we can build a
#    static executable that will run in a chroot jail.
#LIB = -static
TCC += -DFOSSIL_DYNAMIC_BUILD=1

TCCFLAGS = $(CFLAGS)








#### Extra arguments for linking the finished binary.  Fossil needs
#    to link against the Z-Lib compression library unless the miniz
#    library in the source tree is being used.  There are no other
#    required dependencies.
ZLIB_LIB.0 = -lz
ZLIB_LIB.1 =
ZLIB_LIB.  = $(ZLIB_LIB.0)
................................................................................

# If using zlib:
LIB += $(ZLIB_LIB.$(FOSSIL_ENABLE_MINIZ)) $(LDFLAGS)

# If using HTTPS:
LIB += -lcrypto -lssl






#### Tcl shell for use in running the fossil testsuite.  If you do not
#    care about testing the end result, this can be blank.
#
TCLSH = tclsh

# You should not need to change anything below this line
###############################################################################

2.8

2.7

cc-check-function-in-lib gethostbyname nsl
if {![cc-check-function-in-lib socket {socket network}]} {
    # Last resort, may be Windows
    if {[is_mingw]} {
        define-append LIBS -lwsock32
    }
}

# The SMTP module requires special libraries and headers for MX DNS
# record lookups and such.
cc-check-includes arpa/nameser.h
cc-include-needs bind/resolv.h netinet/in.h
cc-check-includes bind/resolv.h
cc-check-includes resolv.h
if {    !(([cc-check-function-in-lib dn_expand resolv] ||
           [cc-check-function-in-lib   ns_name_uncompress {bind resolv}] ||
           [cc-check-function-in-lib __ns_name_uncompress {bind resolv}]) &&
          ([cc-check-function-in-lib   ns_parserr {bind resolv}] ||
           [cc-check-function-in-lib __ns_parserr {bind resolv}]) &&
          ([cc-check-function-in-lib   res_query {bind resolv}] ||
           [cc-check-function-in-lib __res_query {bind resolv}]))} {
    msg-result "WARNING: SMTP feature will not be able to look up local MX."
}
cc-check-function-in-lib res_9_ns_initparse resolv

# Other nonstandard function checks
cc-check-functions utime
cc-check-functions usleep
cc-check-functions strchrnul
cc-check-functions pledge
cc-check-functions backtrace

# Check for getloadavg(), and if it doesn't exist, define FOSSIL_OMIT_LOAD_AVERAGE

cc-check-function-in-lib gethostbyname nsl
if {![cc-check-function-in-lib socket {socket network}]} {
    # Last resort, may be Windows
    if {[is_mingw]} {
        define-append LIBS -lwsock32
    }
}
















cc-check-function-in-lib ns_name_uncompress resolv


cc-check-functions utime
cc-check-functions usleep
cc-check-functions strchrnul
cc-check-functions pledge
cc-check-functions backtrace

# Check for getloadavg(), and if it doesn't exist, define FOSSIL_OMIT_LOAD_AVERAGE

.TH FOSSIL "1" "September 2018" "http://fossil-scm.org" "User Commands"
.SH NAME
fossil \- Distributed Version Control System
.SH SYNOPSIS
.B fossil
\fIhelp\fR
.br
.B fossil
\fIhelp COMMAND\fR
.br
.B fossil
\fICOMMAND [OPTIONS]\fR
.SH DESCRIPTION
Fossil is a distributed version control system (DVCS) with built-in
forum, wiki, ticket tracker, CGI/HTTP interface, and HTTP server.

.SH Common COMMANDs:



add            clean          help           push           timeline
.br
addremove      clone          import         rebuild        ui
.br
all            commit         info           remote-url     undo
.br
amend          delete         init           revert         unpublished
.br
annotate       diff           ls             rm             unversioned
.br
bisect         export         merge          settings       update
.br
blame          extras         mv             sql            version
.br
branch         finfo          open           stash
.br
bundle         fusefs         praise         status
.br
cat            gdiff          publish        sync
.br
changes        grep           pull           tag

.SH FEATURES

Features as described on the fossil home page.

.HP
1.
.B Integrated Bug Tracking, Wiki, Forum, and Technotes
- In addition to doing distributed version control like Git and
Mercurial, Fossil also supports bug tracking, wiki, forum, and
technotes.

.HP
2.
.B Built-in Web Interface
- Fossil has a built-in and intuitive web interface that promotes
project situational awareness. Type "fossil ui" and Fossil automatically
opens a web browser to a page that shows detailed graphical history and
................................................................................

.HP
4.
.B Simple Networking
- No custom protocols or TCP ports. Fossil uses plain old HTTP (or HTTPS
or SSH) for all network communications, so it works fine from behind
restrictive firewalls, including proxies. The protocol is bandwidth
efficient to the point that Fossil can be used comfortably over dial-up
or over the exceedingly slow Wifi on airliners.

.HP
5.
.B CGI/SCGI Enabled
- No server is required, but if you want to set one up, Fossil supports
four easy server configurations.

.HP
6.
.B Autosync
- Fossil supports "autosync" mode which helps to keep projects moving
forward by reducing the amount of needless forking and merging often
associated with distributed projects.
................................................................................

.HP
7.
.B Robust & Reliable
- Fossil stores content using an enduring file format in an SQLite
database so that transactions are atomic even if interrupted by a
power loss or system crash. Automatic self-checks verify that all
aspects of the repository are consistent prior to each commit.

.HP
8.
.B Free and Open-Source
- Uses the 2-clause BSD license.



.SH DOCUMENTATION
http://www.fossil-scm.org/
.br
.B fossil
\fIui\fR

.TH FOSSIL "1" "February 2015" "http://fossil-scm.org" "User Commands"
.SH NAME
fossil \- Distributed Version Control System
.SH SYNOPSIS
.B fossil
\fIhelp\fR
.br
.B fossil
\fIhelp COMMAND\fR
.br
.B fossil
\fICOMMAND [OPTIONS]\fR
.SH DESCRIPTION
Fossil is a distributed version control system (DVCS) with built-in
wiki, ticket tracker, CGI/http interface, and http server.

.SH Common COMMANDs:

add            changes        gdiff          publish        status
.br
addremove      clean          help           pull           sync
.br
all            clone          import         push           tag
.br
amend          commit         info           rebuild        timeline
.br
annotate       delete         init           remote-url     ui
.br
bisect         diff           ls             revert         undo
.br
blame          export         merge          rm             unpublished
.br
branch         extras         mv             settings       unversioned
.br
bundle         finfo          open           sqlite3        update
.br
cat            fusefs         praise         stash          version





.SH FEATURES

Features as described on the fossil home page.

.HP
1.
.B Integrated Bug Tracking, Wiki, & Technotes
- In addition to doing distributed version control like Git and
Mercurial, Fossil also supports bug tracking, wiki, and technotes.


.HP
2.
.B Built-in Web Interface
- Fossil has a built-in and intuitive web interface that promotes
project situational awareness. Type "fossil ui" and Fossil automatically
opens a web browser to a page that shows detailed graphical history and
................................................................................

.HP
4.
.B Simple Networking
- No custom protocols or TCP ports. Fossil uses plain old HTTP (or HTTPS
or SSH) for all network communications, so it works fine from behind
restrictive firewalls, including proxies. The protocol is bandwidth
efficient to the point that Fossil can be used comfortably over dial-up.


.HP
5.
.B CGI/SCGI Enabled
- No server is required, but if you want to set one up, Fossil supports
four simple server configurations.

.HP
6.
.B Autosync
- Fossil supports "autosync" mode which helps to keep projects moving
forward by reducing the amount of needless forking and merging often
associated with distributed projects.
................................................................................

.HP
7.
.B Robust & Reliable
- Fossil stores content using an enduring file format in an SQLite
database so that transactions are atomic even if interrupted by a
power loss or system crash. Automatic self-checks verify that all
aspects of the repository are consistent prior to each commit. In





over seven years of operation, no work has ever been lost after
having been committed to a Fossil repository.

.SH DOCUMENTATION
http://www.fossil-scm.org/
.br
.B fossil
\fIui\fR

<html lang="en">
<head>
  <meta charset="utf-8">
  <base href="$baseurl/$current_page" />
  <title>$<project_name>: $<title></title>
    <meta name="viewport" content="width=device-width, initial-scale=1.0">
    <meta http-equiv="Content-Security-Policy" content="default-src 'self' data:; script-src 'self' 'nonce-$<nonce>'; style-src 'self' 'unsafe-inline'"/>
    <link rel="alternate" type="application/rss+xml" title="RSS Feed" href="$home/timeline.rss" />
    <link rel="stylesheet" href="$home/style.css?default" type="text/css" media="screen" />
    <script>
    function gebi(x){
      if(/^#/.test(x)) x = x.substr(1);
      var e = document.getElementById(x);
      if(!e) throw new Error("Expecting element with ID "+x);
................................................................................
          </div><!--/.nav-collapse -->
        </div>
      </div>
      <div class="content">
        <th1>
          html "<div class='container'>"
            html "<ul class='breadcrumb'>"
              html "<li><a href='$home$index_page'>Home</a></li>"
              html "<li><a href='$home/$current_page'>[htmlize $title]</a></li>"
              html "</ul>"
            </th1>

<html lang="en">
<head>
  <meta charset="utf-8">
  <base href="$baseurl/$current_page" />
  <title>$<project_name>: $<title></title>
    <meta name="viewport" content="width=device-width, initial-scale=1.0">

    <link rel="alternate" type="application/rss+xml" title="RSS Feed" href="$home/timeline.rss" />
    <link rel="stylesheet" href="$home/style.css?default" type="text/css" media="screen" />
    <script>
    function gebi(x){
      if(/^#/.test(x)) x = x.substr(1);
      var e = document.getElementById(x);
      if(!e) throw new Error("Expecting element with ID "+x);
................................................................................
          </div><!--/.nav-collapse -->
        </div>
      </div>
      <div class="content">
        <th1>
          html "<div class='container'>"
            html "<ul class='breadcrumb'>"
              html "<li><a href='$index_page'>Home</a></li>"
              html "<li><a href='$home/$current_page'>$title</a></li>"
              html "</ul>"
            </th1>

    overflow: auto;
    border: 1px solid #ccc;
    border-radius: 5px;
}
.content blockquote {
    padding: 0 15px;
}
div.forumHierRoot blockquote, div.forumHier blockquote, div.forumEdit blockquote {
    background-color: rgba(65, 131, 196, 0.1);
    border-left: 3px solid #254769;
    padding: .1em 1em;
}

table.report {
    cursor: auto;

    overflow: auto;
    border: 1px solid #ccc;
    border-radius: 5px;
}
.content blockquote {
    padding: 0 15px;
}
div.forumHierRoot blockquote, div.forumHier blockquote {
    background-color: rgba(65, 131, 196, 0.1);
    border-left: 3px solid #254769;
    padding: .1em 1em;
}

table.report {
    cursor: auto;

  upvar home home
  if {[string range $url 0 [string length $current]] eq "/$current"} {
    html "<a href='$home$url' class='active $cls'>$name</a>\n"
  } else {
    html "<a href='$home$url' class='$cls'>$name</a>\n"
  }
}
html "<a id='hbbtn' href='#'>&#9776;</a>"
menulink $index_page Home {}
if {[anycap jor]} {
  menulink /timeline Timeline {}
}
if {[hascap oh]} {
  menulink /dir?ci=tip Files desktoponly
}

  upvar home home
  if {[string range $url 0 [string length $current]] eq "/$current"} {
    html "<a href='$home$url' class='active $cls'>$name</a>\n"
  } else {
    html "<a href='$home$url' class='$cls'>$name</a>\n"
  }
}
html "<a href='#'>&#9776;</a>"
menulink $index_page Home {}
if {[anycap jor]} {
  menulink /timeline Timeline {}
}
if {[hascap oh]} {
  menulink /dir?ci=tip Files desktoponly
}

*******************************************************************************
**
** This file contains the JS code specific to the Fossil default skin.
** Currently, the only thing this does is handle clicks on its hamburger
** menu button.
*/
(function() {
  var hbButton = document.getElementById("hbbtn");
  if (!hbButton) return;   // no hamburger button
  if (!document.addEventListener) {
    // Turn the button into a link to the sitemap for incompatible browsers.
    hbButton.href = "$home/sitemap";
    return;
  }
  var panel = document.getElementById("hbdrop");
  if (!panel) return;   // site admin might've nuked it
  if (!panel.style) return;  // shouldn't happen, but be sure
  var panelBorder = panel.style.border;
  var panelInitialized = false;   // reset if browser window is resized
  var panelResetBorderTimerID = 0;   // used to cancel post-animation tasks

  // Disable animation if this browser doesn't support CSS transitions.
  //
  // We need this ugly calling form for old browsers that don't allow
  // panel.style.hasOwnProperty('transition'); catering to old browsers
  // is the whole point here.
  var animate = panel.style.transition !== null && (typeof(panel.style.transition) == "string");

  // The duration of the animation can be overridden from the default skin
  // header.txt by setting the "data-anim-ms" attribute of the panel.
  var animMS = panel.getAttribute("data-anim-ms");
  if (animMS) {           // not null or empty string, parse it
    animMS = parseInt(animMS);
    if (isNaN(animMS) || animMS == 0)
      animate = false;    // disable animation if non-numeric or zero
    else if (animMS < 0)
      animMS = 400;       // set default animation duration if negative
  }
  else                    // attribute is null or empty string, use default
    animMS = 400;

  // Calculate panel height despite its being hidden at call time.
  // Based on https://stackoverflow.com/a/29047447/142454
  var panelHeight;  // computed on first panel display
  function calculatePanelHeight() {

    // Clear the max-height CSS property in case the panel size is recalculated
    // after the browser window was resized.
    panel.style.maxHeight = '';

    // Get initial panel styles so we can restore them below.
    var es   = window.getComputedStyle(panel),
        edis = es.display,
        epos = es.position,
        evis = es.visibility;

    // Restyle the panel so we can measure its height while invisible.
................................................................................
  // first call, where the div was initially invisible.  If we were
  // to change the panel's visibility and height at the same time
  // instead, that would prevent the browser from seeing the height
  // change as a state transition, so it'd skip the CSS transition:
  //
  // https://developer.mozilla.org/en-US/docs/Web/CSS/CSS_Transitions/Using_CSS_transitions#JavaScript_examples
  function showPanel() {
    // Cancel the timer to remove the panel border after the closing animation,
    // otherwise double-clicking the hamburger button with the panel opened will
    // remove the borders from the (closed and immediately reopened) panel.
    if (panelResetBorderTimerID) {
      clearTimeout(panelResetBorderTimerID);
      panelResetBorderTimerID = 0;
    }
    if (animate) {
      if (!panelInitialized) {
        panelInitialized = true;
        // Set up a CSS transition to animate the panel open and
        // closed.  Only needs to be done once per page load.
        // Based on https://stackoverflow.com/a/29047447/142454
        calculatePanelHeight();
        panel.style.transition = 'max-height ' + animMS +
            'ms ease-in-out';
        panel.style.overflowY  = 'hidden';
        panel.style.maxHeight  = '0';
      }
      setTimeout(function() {
        panel.style.maxHeight = panelHeight;
        panel.style.border    = panelBorder;
      }, 40);   // 25ms is insufficient with Firefox 62
    }

    panel.style.display = 'block';
    document.addEventListener('keydown',panelKeydown,/* useCapture == */true);
    document.addEventListener('click',panelClick,false);
  }

  var panelKeydown = function(event) {
    var key = event.which || event.keyCode;
    if (key == 27) {
      event.stopPropagation();   // ignore other keydown handlers
      panelToggle(true);
    }
  };

  var panelClick = function(event) {
    if (!panel.contains(event.target)) {
      // Call event.preventDefault() to have clicks outside the opened panel
      // just close the panel, and swallow clicks on links or form elements.
      //event.preventDefault();
      panelToggle(true);
    }
  };

  // Return true if the panel is showing.
  function panelShowing() {
    if (animate) {
      return panel.style.maxHeight == panelHeight;
    }
    else {
      return panel.style.display == 'block';
    }
  }

  // Check if the specified HTML element has any child elements. Note that plain
  // text nodes, comments, and any spaces (presentational or not) are ignored.
  function hasChildren(element) {
    var childElement = element.firstChild;
    while (childElement) {
      if (childElement.nodeType == 1) // Node.ELEMENT_NODE == 1
        return true;
      childElement = childElement.nextSibling;
    }
    return false;
  }

  // Reset the state of the panel to uninitialized if the browser window is
  // resized, so the dimensions are recalculated the next time it's opened.
  window.addEventListener('resize',function(event) {
    panelInitialized = false;
  },false);

  // Click handler for the hamburger button.
  hbButton.addEventListener('click',function(event) {
    // Break the event handler chain, or the handler for document → click
    // (about to be installed) may already be triggered by the current event.
    event.stopPropagation();
    event.preventDefault();  // prevent browser from acting on <a> click
    panelToggle(false);
  },false);

  function panelToggle(suppressAnimation) {


    if (panelShowing()) {
      document.removeEventListener('keydown',panelKeydown,/* useCapture == */true);
      document.removeEventListener('click',panelClick,false);
      // Transition back to hidden state.
      if (animate) {
        if (suppressAnimation) {
          var transition = panel.style.transition;
          panel.style.transition = '';
          panel.style.maxHeight = '0';
          panel.style.border = 'none';
          setTimeout(function() {
            // Make sure CSS transition won't take effect now, so restore it
            // asynchronously. Outer variable 'transition' still valid here.
            panel.style.transition = transition;
          }, 40);   // 25ms is insufficient with Firefox 62
        }
        else {
          panel.style.maxHeight = '0';
          panelResetBorderTimerID = setTimeout(function() {
            // Browsers show a 1px high border line when maxHeight == 0,
            // our "hidden" state, so hide the borders in that state, too.
            panel.style.border = 'none';
            panelResetBorderTimerID = 0;   // clear ID of completed timer
          }, animMS);
        }
      }
      else {
        panel.style.display = 'none';
      }
    }
    else {
      if (!hasChildren(panel)) {

        // Only get the sitemap once per page load: it isn't likely to
        // change on us.
        var xhr = new XMLHttpRequest();
        xhr.onload = function() {
          var doc = xhr.responseXML;
          if (doc) {
            var sm = doc.querySelector("ul#sitemap");
            if (sm && xhr.status == 200) {
              // Got sitemap.  Insert it into the drop-down panel.

              panel.innerHTML = sm.outerHTML;

              // Display the panel









              showPanel();
            }

          }

          // else, can't parse response as HTML or XML
        }
        xhr.open("GET", "$home/sitemap?popup");   // note the TH1 substitution!
        xhr.responseType = "document";
        xhr.send();
      }
      else {
        showPanel();   // just show what we built above
      }

    }
  }
})();

*******************************************************************************
**
** This file contains the JS code specific to the Fossil default skin.
** Currently, the only thing this does is handle clicks on its hamburger
** menu button.
*/
(function() {







  var panel = document.getElementById("hbdrop");
  if (!panel) return;   // site admin might've nuked it
  if (!panel.style) return;  // shouldn't happen, but be sure
  var panelBorder = panel.style.border;



  // Disable animation if this browser doesn't support CSS transitions.
  //
  // We need this ugly calling form for old browsers that don't allow
  // panel.style.hasOwnProperty('transition'); catering to old browsers
  // is the whole point here.
  var animate = panel.style.transition !== null && (typeof(panel.style.transition) == "string");












  var animMS = 400;

  // Calculate panel height despite its being hidden at call time.
  // Based on https://stackoverflow.com/a/29047447/142454
  var panelHeight;  // computed on sitemap load
  function calculatePanelHeight() {





    // Get initial panel styles so we can restore them below.
    var es   = window.getComputedStyle(panel),
        edis = es.display,
        epos = es.position,
        evis = es.visibility;

    // Restyle the panel so we can measure its height while invisible.
................................................................................
  // first call, where the div was initially invisible.  If we were
  // to change the panel's visibility and height at the same time
  // instead, that would prevent the browser from seeing the height
  // change as a state transition, so it'd skip the CSS transition:
  //
  // https://developer.mozilla.org/en-US/docs/Web/CSS/CSS_Transitions/Using_CSS_transitions#JavaScript_examples
  function showPanel() {







    if (animate) {











      setTimeout(function() {
        panel.style.maxHeight = panelHeight;
        panel.style.border    = panelBorder;
      }, 40);   // 25ms is insufficient with Firefox 62
    }
    else {
      panel.style.display = 'block';


    }
  }

















  // Return true if the panel is showing.
  function panelShowing() {
    if (animate) {
      return panel.style.maxHeight == panelHeight;
    }
    else {
      return panel.style.display == 'block';
    }
  }



















  // Click handler for the hamburger button.









  var needSitemapHTML = true;
  document.querySelector("div.mainmenu > a").onclick = function() {
    if (panelShowing()) {


      // Transition back to hidden state.
      if (animate) {



        panel.style.maxHeight = '0';

        setTimeout(function() {








          // Browsers show a 1px high border line when maxHeight == 0,
          // our "hidden" state, so hide the borders in that state, too.
          panel.style.border = 'none';

        }, animMS);
      }

      else {
        panel.style.display = 'none';
      }
    }


    else if (needSitemapHTML) {
      // Only get it once per page load: it isn't likely to
      // change on us.
      var xhr = new XMLHttpRequest();
      xhr.onload = function() {
        var doc = xhr.responseXML;
        if (doc) {
          var sm = doc.querySelector("ul#sitemap");
          if (sm && xhr.status == 200) {
            // Got sitemap.  Insert it into the drop-down panel.
            needSitemapHTML = false;
            panel.innerHTML = sm.outerHTML;

            // Display the panel
            if (animate) {
              // Set up a CSS transition to animate the panel open and
              // closed.  Only needs to be done once per page load.
              // Based on https://stackoverflow.com/a/29047447/142454
              calculatePanelHeight();
              panel.style.transition = 'max-height ' + animMS +
                  'ms ease-in-out';
              panel.style.overflowY  = 'hidden';
              panel.style.maxHeight  = '0';
              showPanel();
            }
            panel.style.display = 'block';
          }
        }
        // else, can't parse response as HTML or XML
      }
      xhr.open("GET", "$home/sitemap?popup");   // note the TH1 substitution!
      xhr.responseType = "document";
      xhr.send();
    }
    else {
      showPanel();   // just show what we built above
    }
    return false;  // prevent browser from acting on <a> click
  }

})();

      emailerError(p, "Failed to insert email message into output queue.\n"
                      "%s", sqlite3_errmsg(p->db));
    }
  }else if( p->zCmd ){
    FILE *out = popen(p->zCmd, "w");
    if( out ){
      fwrite(blob_buffer(&all), 1, blob_size(&all), out);
      pclose(out);
    }else{
      emailerError(p, "Could not open output pipe \"%s\"", p->zCmd);
    }
  }else if( p->zDir ){
    char *zFile = file_time_tempname(p->zDir, ".email");
    blob_write_to_file(&all, zFile);
    fossil_free(zFile);
................................................................................
** are sent when email-send-method is "relay".  There should be an
** SMTP server configured as a Mail Submission Agent listening on the
** designated host and port and all times.
*/


/*
** COMMAND: alerts*
** 
** Usage: %fossil alerts SUBCOMMAND ARGS...
**
** Subcommands:
**
**    pending                 Show all pending alerts.  Useful for debugging.
**
................................................................................
    p->type = db_column_text(&q, 3)[0];
    p->needMod = db_column_int(&q, 4);
    p->zFromName = 0;
    p->pNext = 0;
    switch( p->type ){
      case 'c':  zType = "Check-In";        break;
      case 'f':  zType = "Forum post";      break;
      case 't':  zType = "Ticket Change";   break;
      case 'w':  zType = "Wiki Edit";       break;
    }
    blob_init(&p->hdr, 0, 0);
    blob_init(&p->txt, 0, 0);
    blob_appendf(&p->txt,"== %s %s ==\n%s\n%s/info/%.20s\n",
      db_column_text(&q,1),
      zType,
      db_column_text(&q,2),
................................................................................
    const char *zEmail = db_column_text(&q, 1);
    const char *zCap = db_column_text(&q, 3);
    int nHit = 0;
    for(p=pEvents; p; p=p->pNext){
      if( strchr(zSub,p->type)==0 ) continue;
      if( p->needMod ){
        /* For events that require moderator approval, only send an alert
        ** if the recipient is a moderator for that type of event.  Setup
        ** and Admin users always get notified. */
        char xType = '*';
        if( strpbrk(zCap,"as")==0 ){
          switch( p->type ){
            case 'f':  xType = '5';  break;
            case 't':  xType = 'q';  break;
            case 'w':  xType = 'l';  break;
          }
          if( strchr(zCap,xType)==0 ) continue;
        }
      }else if( strchr(zCap,'s')!=0 || strchr(zCap,'a')!=0 ){
        /* Setup and admin users can get any notification that does not
        ** require moderation */
      }else{
        /* Other users only see the alert if they have sufficient
        ** privilege to view the event itself */
        char xType = '*';
................................................................................
    return;
  }
  if( fossil_strcmp(P("name"),"test1")==0 ){
    /* Visit the /announce/test1 page to see the CGI variables */
    @ <p style='border: 1px solid black; padding: 1ex;'>
    cgi_print_all(0, 0);
    @ </p>

  }else if( P("submit")!=0 && cgi_csrf_safe(1) ){
    char *zErr = alert_send_announcement();
    style_header("Announcement Sent");
    if( zErr ){
      @ <h1>Internal Error</h1>
      @ <p>The following error was reported by the system:
      @ <blockquote><pre>
      @ %h(zErr)
      @ </pre></blockquote>
    }else{
      @ <p>The announcement has been sent.</p>
    }
    style_footer();    
    return;
  } else if( !alert_enabled() ){
    style_header("Cannot Send Announcement");
    @ <p>Either you have no subscribers yet, or email alerts are not yet
    @ <a href="https://fossil-scm.org/fossil/doc/trunk/www/alerts.md">set up</a>
    @ for this repository.</p>
    return;
  }

  style_header("Send Announcement");
  @ <form method="POST">
  @ <table class="subscribe">
  if( g.perm.Admin ){
    int aa = PB("aa");
    int all = PB("all");
    const char *aack = aa ? "checked" : "";

      emailerError(p, "Failed to insert email message into output queue.\n"
                      "%s", sqlite3_errmsg(p->db));
    }
  }else if( p->zCmd ){
    FILE *out = popen(p->zCmd, "w");
    if( out ){
      fwrite(blob_buffer(&all), 1, blob_size(&all), out);
      fclose(out);
    }else{
      emailerError(p, "Could not open output pipe \"%s\"", p->zCmd);
    }
  }else if( p->zDir ){
    char *zFile = file_time_tempname(p->zDir, ".email");
    blob_write_to_file(&all, zFile);
    fossil_free(zFile);
................................................................................
** are sent when email-send-method is "relay".  There should be an
** SMTP server configured as a Mail Submission Agent listening on the
** designated host and port and all times.
*/


/*
** COMMAND: alerts
** 
** Usage: %fossil alerts SUBCOMMAND ARGS...
**
** Subcommands:
**
**    pending                 Show all pending alerts.  Useful for debugging.
**
................................................................................
    p->type = db_column_text(&q, 3)[0];
    p->needMod = db_column_int(&q, 4);
    p->zFromName = 0;
    p->pNext = 0;
    switch( p->type ){
      case 'c':  zType = "Check-In";        break;
      case 'f':  zType = "Forum post";      break;
      case 't':  zType = "Wiki Edit";       break;
      case 'w':  zType = "Ticket Change";   break;
    }
    blob_init(&p->hdr, 0, 0);
    blob_init(&p->txt, 0, 0);
    blob_appendf(&p->txt,"== %s %s ==\n%s\n%s/info/%.20s\n",
      db_column_text(&q,1),
      zType,
      db_column_text(&q,2),
................................................................................
    const char *zEmail = db_column_text(&q, 1);
    const char *zCap = db_column_text(&q, 3);
    int nHit = 0;
    for(p=pEvents; p; p=p->pNext){
      if( strchr(zSub,p->type)==0 ) continue;
      if( p->needMod ){
        /* For events that require moderator approval, only send an alert
        ** if the recipient is a moderator for that type of event */

        char xType = '*';

        switch( p->type ){
          case 'f':  xType = '5';  break;
          case 't':  xType = 'q';  break;
          case 'w':  xType = 'l';  break;
        }
        if( strchr(zCap,xType)==0 ) continue;

      }else if( strchr(zCap,'s')!=0 || strchr(zCap,'a')!=0 ){
        /* Setup and admin users can get any notification that does not
        ** require moderation */
      }else{
        /* Other users only see the alert if they have sufficient
        ** privilege to view the event itself */
        char xType = '*';
................................................................................
    return;
  }
  if( fossil_strcmp(P("name"),"test1")==0 ){
    /* Visit the /announce/test1 page to see the CGI variables */
    @ <p style='border: 1px solid black; padding: 1ex;'>
    cgi_print_all(0, 0);
    @ </p>
  }else
  if( P("submit")!=0 && cgi_csrf_safe(1) ){
    char *zErr = alert_send_announcement();
    style_header("Announcement Sent");
    if( zErr ){
      @ <h1>Internal Error</h1>
      @ <p>The following error was reported by the system:
      @ <blockquote><pre>
      @ %h(zErr)
      @ </pre></blockquote>
    }else{
      @ <p>The announcement has been sent.</p>
    }
    style_footer();    
    return;






  }

  style_header("Send Announcement");
  @ <form method="POST">
  @ <table class="subscribe">
  if( g.perm.Admin ){
    int aa = PB("aa");
    int all = PB("all");
    const char *aack = aa ? "checked" : "";

  Lease x;
  sqlite3_uint64 tmNow;

  if( backofficeDb ) return;
  if( g.zRepositoryName==0 ) return;
  if( g.db==0 ) return;
  if( !db_table_exists("repository","config") ) return;
  if( db_get_boolean("backoffice-disable",0) ) return;
  tmNow = time(0);
  backofficeReadLease(&x);
  if( x.tmNext>=tmNow && backofficeProcessExists(x.idNext) ){
    /* Another backoffice process is already queued up to run.  This
    ** process does not need to do any backoffice work. */
    return;
  }else{
    /* We need to run backup to be (at a minimum) on-deck */
    backofficeDb = fossil_strdup(g.zRepositoryName);
  }
}

/*
** Call this routine to disable backoffice
*/
void backoffice_disable(void){
  backofficeDb = "x";
}

/*
** Check for errors prior to running backoffice_thread() or backoffice_run().
*/
static void backoffice_error_check_one(int *pOnce){
  if( *pOnce ){
    fossil_panic("multiple calls to backoffice()");
  }
................................................................................
  Lease x;
  sqlite3_uint64 tmNow;
  sqlite3_uint64 idSelf;
  int lastWarning = 0;
  int warningDelay = 30;
  static int once = 0;

  if( sqlite3_db_readonly(g.db, 0) ) return;
  backoffice_error_check_one(&once);
  idSelf = backofficeProcessId();
  while(1){
    tmNow = time(0);
    db_begin_write();
    backofficeReadLease(&x);
    if( x.tmNext>=tmNow
................................................................................

  /* Here is where the actual work of the backoffice happens */
  alert_backoffice(0);
  smtp_cleanup();
}

/*
** COMMAND: backoffice*
**
** Usage: backoffice [-R repository]
**
** Run backoffice processing.  This might be done by a cron job or
** similar to make sure backoffice processing happens periodically.
*/
void backoffice_command(void){

  Lease x;
  sqlite3_uint64 tmNow;

  if( backofficeDb ) return;
  if( g.zRepositoryName==0 ) return;
  if( g.db==0 ) return;
  if( !db_table_exists("repository","config") ) return;

  tmNow = time(0);
  backofficeReadLease(&x);
  if( x.tmNext>=tmNow && backofficeProcessExists(x.idNext) ){
    /* Another backoffice process is already queued up to run.  This
    ** process does not need to do any backoffice work. */
    return;
  }else{
    /* We need to run backup to be (at a minimum) on-deck */
    backofficeDb = fossil_strdup(g.zRepositoryName);
  }
}








/*
** Check for errors prior to running backoffice_thread() or backoffice_run().
*/
static void backoffice_error_check_one(int *pOnce){
  if( *pOnce ){
    fossil_panic("multiple calls to backoffice()");
  }
................................................................................
  Lease x;
  sqlite3_uint64 tmNow;
  sqlite3_uint64 idSelf;
  int lastWarning = 0;
  int warningDelay = 30;
  static int once = 0;


  backoffice_error_check_one(&once);
  idSelf = backofficeProcessId();
  while(1){
    tmNow = time(0);
    db_begin_write();
    backofficeReadLease(&x);
    if( x.tmNext>=tmNow
................................................................................

  /* Here is where the actual work of the backoffice happens */
  alert_backoffice(0);
  smtp_cleanup();
}

/*
** COMMAND: backoffice
**
** Usage: backoffice [-R repository]
**
** Run backoffice processing.  This might be done by a cron job or
** similar to make sure backoffice processing happens periodically.
*/
void backoffice_command(void){

       " || '%d')", rid);
}

/*
** Create a TEMP table named "bilog" that contains the complete history
** of the current bisect.
*/
int bisect_create_bilog_table(int iCurrent, const char *zDesc){
  char *zLog;
  Blob log, id;
  Stmt q;
  int cnt = 0;

  if( zDesc!=0 ){
    blob_init(&log, 0, 0);
    while( zDesc[0]=='y' || zDesc[0]=='n' ){
      int i;
      char c;
      int rid;
      if( blob_size(&log) ) blob_append(&log, " ", 1);
      if( zDesc[0]=='n' ) blob_append(&log, "-", 1);
      for(i=1; ((c = zDesc[i])>='0' && c<='9') || (c>='a' && c<='f'); i++){}
      if( i==1 ) break;
      rid = db_int(0, 
        "SELECT rid FROM blob"
        " WHERE uuid LIKE '%.*q%%'"
        "   AND EXISTS(SELECT 1 FROM plink WHERE cid=rid)",
        i-1, zDesc+1
      );
      if( rid==0 ) break;
      blob_appendf(&log, "%d", rid);
      zDesc += i;
    }
  }else{
    zLog = db_lget("bisect-log","");
    blob_init(&log, zLog, -1);
  }
  db_multi_exec(
     "CREATE TEMP TABLE bilog("
     "  seq INTEGER PRIMARY KEY,"  /* Sequence of events */
     "  stat TEXT,"                /* Type of occurrence */
     "  rid INTEGER UNIQUE"        /* Check-in number */
     ");"
  );
................................................................................
  if( iCurrent>0 ){
    db_bind_int(&q, ":seq", ++cnt);
    db_bind_text(&q, ":stat", "CURRENT");
    db_bind_int(&q, ":rid", iCurrent);
    db_step(&q);
  }
  db_finalize(&q);
  return 1;
}

/* Return a permalink description of a bisect.  Space is obtained from
** fossil_malloc() and should be freed by the caller.
**
** A bisect description consists of characters 'y' and 'n' and lowercase
** hex digits.  Each term begins with 'y' or 'n' (success or failure) and
** is followed by a hash prefix in lowercase hex.
*/
char *bisect_permalink(void){
  char *zLog = db_lget("bisect-log","");
  char *zResult;
  Blob log;
  Blob link = BLOB_INITIALIZER;
  Blob id;
  blob_init(&log, zLog, -1);
  while( blob_token(&log, &id) ){
    int rid = atoi(blob_str(&id));
    char *zUuid = db_text(0,"SELECT lower(uuid) FROM blob WHERE rid=%d",
                       rid<0 ? -rid : rid);
    blob_appendf(&link, "%c%.10s", rid<0 ? 'n' : 'y', zUuid);
  }
  zResult = mprintf("%s", blob_str(&link));
  blob_reset(&link);
  blob_reset(&log);
  blob_reset(&id);
  return zResult;
}

/*
** Show a chart of bisect "good" and "bad" versions.  The chart can be
** sorted either chronologically by bisect time, or by check-in time.
*/
static void bisect_chart(int sortByCkinTime){
  Stmt q;
  int iCurrent = db_lget_int("checkout",0);
  bisect_create_bilog_table(iCurrent, 0);
  db_prepare(&q,
    "SELECT bilog.seq, bilog.stat,"
    "       substr(blob.uuid,1,16), datetime(event.mtime),"
    "       blob.rid==%d"
    "  FROM bilog, blob, event"
    " WHERE blob.rid=bilog.rid AND event.objid=bilog.rid"
    "   AND event.type='ci'"
................................................................................
    char *zDisplay = db_lget("bisect-display","chart");
    int m = (int)strlen(zDisplay);
    bisect_path();
    pMid = path_midpoint();
    if( pMid==0 ){
      fossil_print("bisect complete\n");
    }else{
      int nSpan = path_length();
      int nStep = path_search_depth();
      g.argv[1] = "update";
      g.argv[2] = db_text(0, "SELECT uuid FROM blob WHERE rid=%d", pMid->rid);
      g.argc = 3;
      g.fNoSync = 1;
      update_cmd();
      fossil_print("span: %d  steps-remaining: %d\n", nSpan, nStep);
    }

    if( strncmp(zDisplay,"chart",m)==0 ){
      bisect_chart(1);
    }else if( strncmp(zDisplay, "log", m)==0 ){
      bisect_chart(0);
    }else if( strncmp(zDisplay, "status", m)==0 ){

       " || '%d')", rid);
}

/*
** Create a TEMP table named "bilog" that contains the complete history
** of the current bisect.
*/
void bisect_create_bilog_table(int iCurrent){
  char *zLog = db_lget("bisect-log","");
  Blob log, id;
  Stmt q;
  int cnt = 0;























  blob_init(&log, zLog, -1);

  db_multi_exec(
     "CREATE TEMP TABLE bilog("
     "  seq INTEGER PRIMARY KEY,"  /* Sequence of events */
     "  stat TEXT,"                /* Type of occurrence */
     "  rid INTEGER UNIQUE"        /* Check-in number */
     ");"
  );
................................................................................
  if( iCurrent>0 ){
    db_bind_int(&q, ":seq", ++cnt);
    db_bind_text(&q, ":stat", "CURRENT");
    db_bind_int(&q, ":rid", iCurrent);
    db_step(&q);
  }
  db_finalize(&q);




























}

/*
** Show a chart of bisect "good" and "bad" versions.  The chart can be
** sorted either chronologically by bisect time, or by check-in time.
*/
static void bisect_chart(int sortByCkinTime){
  Stmt q;
  int iCurrent = db_lget_int("checkout",0);
  bisect_create_bilog_table(iCurrent);
  db_prepare(&q,
    "SELECT bilog.seq, bilog.stat,"
    "       substr(blob.uuid,1,16), datetime(event.mtime),"
    "       blob.rid==%d"
    "  FROM bilog, blob, event"
    " WHERE blob.rid=bilog.rid AND event.objid=bilog.rid"
    "   AND event.type='ci'"
................................................................................
    char *zDisplay = db_lget("bisect-display","chart");
    int m = (int)strlen(zDisplay);
    bisect_path();
    pMid = path_midpoint();
    if( pMid==0 ){
      fossil_print("bisect complete\n");
    }else{


      g.argv[1] = "update";
      g.argv[2] = db_text(0, "SELECT uuid FROM blob WHERE rid=%d", pMid->rid);
      g.argc = 3;
      g.fNoSync = 1;
      update_cmd();

    }

    if( strncmp(zDisplay,"chart",m)==0 ){
      bisect_chart(1);
    }else if( strncmp(zDisplay, "log", m)==0 ){
      bisect_chart(0);
    }else if( strncmp(zDisplay, "status", m)==0 ){

** This file contains code used to create new branches within a repository.
*/
#include "config.h"
#include "branch.h"
#include <assert.h>

/*
**  fossil branch new    NAME  BASIS ?OPTIONS?
**  argv0  argv1  argv2  argv3 argv4
*/
void branch_new(void){
  int rootid;            /* RID of the root check-in - what we branch off of */
  int brid;              /* RID of the branch check-in */
  int noSign;            /* True if the branch is unsigned */
  int i;                 /* Loop counter */
................................................................................

  /* Commit */
  db_end_transaction(0);

  /* Do an autosync push, if requested */
  if( !isPrivate ) autosync_loop(SYNC_PUSH, db_get_int("autosync-tries",1),0);
}

/*
** Create a TEMP table named "tmp_brlist" with 7 columns:
**
**      name           Name of the branch
**      mtime          Time of last checkin on this branch
**      isclosed       True if the branch is closed
**      mergeto        Another branch this branch was merged into
**      nckin          Number of checkins on this branch
**      ckin           Hash of the last checkin on this branch
**      bgclr          Background color for this branch
*/
static const char createBrlistQuery[] =
@ CREATE TEMP TABLE IF NOT EXISTS tmp_brlist AS
@ SELECT
@   tagxref.value AS name,
@   max(event.mtime) AS mtime,
@   EXISTS(SELECT 1 FROM tagxref AS tx
@           WHERE tx.rid=tagxref.rid
@             AND tx.tagid=(SELECT tagid FROM tag WHERE tagname='closed')
@             AND tx.tagtype>0) AS isclosed,
@   (SELECT tagxref.value
@      FROM plink CROSS JOIN tagxref
@    WHERE plink.pid=event.objid
@       AND tagxref.rid=plink.cid
@      AND tagxref.tagid=(SELECT tagid FROM tag WHERE tagname='branch')
@      AND tagtype>0) AS mergeto,
@   count(*) AS nckin,
@   (SELECT uuid FROM blob WHERE rid=tagxref.rid) AS ckin,
@   event.bgcolor AS bgclr
@  FROM tagxref, tag, event
@ WHERE tagxref.tagid=tag.tagid
@   AND tagxref.tagtype>0
@   AND tag.tagname='branch'
@   AND event.objid=tagxref.rid
@ GROUP BY 1;
;

/* Call this routine to create the TEMP table */
static void brlist_create_temp_table(void){
  db_multi_exec(createBrlistQuery/*works-like:""*/);
}


#if INTERFACE
/*
** Allows bits in the mBplqFlags parameter to branch_prepare_list_query().
*/
#define BRL_CLOSED_ONLY      0x001 /* Show only closed branches */
#define BRL_OPEN_ONLY        0x002 /* Show only open branches */
#define BRL_BOTH             0x003 /* Show both open and closed branches */
#define BRL_OPEN_CLOSED_MASK 0x003
#define BRL_ORDERBY_MTIME    0x004 /* Sort by MTIME. (otherwise sort by name)*/
#define BRL_REVERSE          0x008 /* Reverse the sort order */

#endif /* INTERFACE */

/*
** Prepare a query that will list branches.
**
** If (which<0) then the query pulls only closed branches. If
** (which>0) then the query pulls all (closed and opened)
** branches. Else the query pulls currently-opened branches.
*/
void branch_prepare_list_query(Stmt *pQuery, int brFlags){
  Blob sql;
  blob_init(&sql, 0, 0);
  brlist_create_temp_table();
  switch( brFlags & BRL_OPEN_CLOSED_MASK ){
    case BRL_CLOSED_ONLY: {
      blob_append_sql(&sql,




        "SELECT name FROM tmp_brlist WHERE isclosed"





      );
      break;
    }
    case BRL_BOTH: {
      blob_append_sql(&sql,
        "SELECT name FROM tmp_brlist"




      );
      break;
    }
    case BRL_OPEN_ONLY: {
      blob_append_sql(&sql,
        "SELECT name FROM tmp_brlist WHERE NOT isclosed"





      );
      break;
    }
  }
  if( brFlags & BRL_ORDERBY_MTIME ){
    blob_append_sql(&sql, " ORDER BY -mtime");
  }else{
    blob_append_sql(&sql, " ORDER BY name COLLATE nocase");
  }
  if( brFlags & BRL_REVERSE ){
    blob_append_sql(&sql," DESC");
  }
  db_prepare_blob(pQuery, &sql);
  blob_reset(&sql);
}

/*
** If the branch named in the argument is open, return a RID for one of
** the open leaves of that branch.  If the branch does not exists or is
** closed, return 0.
*/
................................................................................
**
**        Print the name of the branch for the current check-out
**
**    fossil branch info BRANCH-NAME
**
**        Print information about a branch
**
**    fossil branch list|ls ?OPTIONS?
**
**        List all branches. Options:

**          -a|--all      List all branches.  Default show only open branches
**          -c|--closed   List closed branches.
**          -r            Reverse the sort order
**          -t            Show recently changed branches first
**
**    fossil branch new BRANCH-NAME BASIS ?OPTIONS?
**
**        Create a new branch BRANCH-NAME off of check-in BASIS.
**        Supported options for this subcommand include:
**        --private             branch is private (i.e., remains local)
**        --bgcolor COLOR       use COLOR instead of automatic background
................................................................................
  }else if( (strncmp(zCmd,"list",n)==0)||(strncmp(zCmd, "ls", n)==0) ){
    Stmt q;
    int vid;
    char *zCurrent = 0;
    int brFlags = BRL_OPEN_ONLY;
    if( find_option("all","a",0)!=0 ) brFlags = BRL_BOTH;
    if( find_option("closed","c",0)!=0 ) brFlags = BRL_CLOSED_ONLY;
    if( find_option("t",0,0)!=0 ) brFlags |= BRL_ORDERBY_MTIME;
    if( find_option("r",0,0)!=0 ) brFlags |= BRL_REVERSE;

    if( g.localOpen ){
      vid = db_lget_int("checkout", 0);
      zCurrent = db_text(0, "SELECT value FROM tagxref"
                            " WHERE rid=%d AND tagid=%d", vid, TAG_BRANCH);
    }
    branch_prepare_list_query(&q, brFlags);
................................................................................
  }else if( strncmp(zCmd,"new",n)==0 ){
    branch_new();
  }else{
    fossil_fatal("branch subcommand should be one of: "
                 "current info list ls new");
  }
}



























/*
** This is the new-style branch-list page that shows the branch names
** together with their ages (time of last check-in) and whether or not
** they are closed or merged to another branch.
**
** Control jumps to this routine from brlist_page() (the /brlist handler)
................................................................................
  login_check_credentials();
  if( !g.perm.Read ){ login_needed(g.anon.Read); return; }
  style_header("Branches");
  style_adunit_config(ADUNIT_RIGHT_OK);
  style_submenu_checkbox("colors", "Use Branch Colors", 0, 0);
  login_anonymous_available();

  brlist_create_temp_table();
  db_prepare(&q, "SELECT * FROM tmp_brlist ORDER BY mtime DESC");
  rNow = db_double(0.0, "SELECT julianday('now')");
  @ <div class="brlist">
  @ <table class='sortable' data-column-types='tkNtt' data-init-sort='2'>
  @ <thead><tr>
  @ <th>Branch Name</th>
  @ <th>Last Change</th>
  @ <th>Check-ins</th>
  @ <th>Status</th>
  @ <th>Resolution</th>
  @ </tr></thead><tbody>
  while( db_step(&q)==SQLITE_ROW ){
    const char *zBranch = db_column_text(&q, 0);
    double rMtime = db_column_double(&q, 1);
................................................................................
      }
    }
    if( zBgClr && zBgClr[0] && show_colors ){
      @ <tr style="background-color:%s(zBgClr)">
    }else{
      @ <tr>
    }
    @ <td>%z(href("%R/timeline?r=%T",zBranch))%h(zBranch)</a></td>
    @ <td data-sortkey="%016llx(iMtime)">%s(zAge)</td>
    @ <td>%d(nCkin)</td>
    fossil_free(zAge);
    @ <td>%s(isClosed?"closed":"")</td>
    if( zMergeTo ){
      @ <td>merged into
      @ %z(href("%R/timeline?f=%!S",zLastCkin))%h(zMergeTo)</a></td>
    }else{
................................................................................
      cnt++;
    }
    if( colorTest ){
      const char *zColor = hash_color(zBr);
      @ <li><span style="background-color: %s(zColor)">
      @ %h(zBr) &rarr; %s(zColor)</span></li>
    }else{
      @ <li>%z(href("%R/timeline?r=%T",zBr))%h(zBr)</a></li>
    }
  }
  if( cnt ){
    @ </ul>
  }
  db_finalize(&q);
  style_footer();
................................................................................
    "   AND tagxref.tagid=tag.tagid"
    "   AND tagxref.tagtype>0"
    "   AND tag.tagname GLOB 'sym-*'",
    rid
  );
  while( db_step(&q)==SQLITE_ROW ){
    const char *zTagName = db_column_text(&q, 0);
    @  %z(href("%R/timeline?r=%T",zTagName))[timeline]</a>
  }
  db_finalize(&q);
}

/*
** WEBPAGE: brtimeline
**
** Show a timeline of all branches
**
** Query parameters:
**
**     ng            No graph
**     nohidden      Hide check-ins with "hidden" tag
**     onlyhidden    Show only check-ins with "hidden" tag
**     brbg          Background color by branch name
**     ubg           Background color by user name
*/
void brtimeline_page(void){
  Blob sql = empty_blob;
  Stmt q;
  int tmFlags;                            /* Timeline display flags */
  int fNoHidden = PB("nohidden")!=0;      /* The "nohidden" query parameter */
  int fOnlyHidden = PB("onlyhidden")!=0;  /* The "onlyhidden" query parameter */

  login_check_credentials();
  if( !g.perm.Read ){ login_needed(g.anon.Read); return; }

  style_header("Branches");
  style_submenu_element("List", "brlist");
  login_anonymous_available();
  timeline_ss_submenu();
  cookie_render();
  @ <h2>The initial check-in for each branch:</h2>
  blob_append(&sql, timeline_query_for_www(), -1);
  blob_append_sql(&sql,

    "AND blob.rid IN (SELECT rid FROM tagxref"
    "                  WHERE tagtype>0 AND tagid=%d AND srcid!=0)", TAG_BRANCH);
  if( fNoHidden || fOnlyHidden ){
    const char* zUnaryOp = fNoHidden ? "NOT" : "";
    blob_append_sql(&sql,
      " AND %s EXISTS(SELECT 1 FROM tagxref"
      " WHERE tagid=%d AND tagtype>0 AND rid=blob.rid)\n",
      zUnaryOp/*safe-for-%s*/, TAG_HIDDEN);
  }
  db_prepare(&q, "%s ORDER BY event.mtime DESC", blob_sql_text(&sql));
  blob_reset(&sql);
  /* Always specify TIMELINE_DISJOINT, or graph_finish() may fail because of too
  ** many descenders to (off-screen) parents. */
  tmFlags = TIMELINE_DISJOINT | TIMELINE_NOSCROLL;
  if( PB("ng")==0 ) tmFlags |= TIMELINE_GRAPH;
  if( PB("brbg")!=0 ) tmFlags |= TIMELINE_BRCOLOR;
  if( PB("ubg")!=0 ) tmFlags |= TIMELINE_UCOLOR;


  www_print_timeline(&q, tmFlags, 0, 0, 0, brtimeline_extra);
  db_finalize(&q);
  style_footer();
}

** This file contains code used to create new branches within a repository.
*/
#include "config.h"
#include "branch.h"
#include <assert.h>

/*
**  fossil branch new    NAME BASIS ?OPTIONS?
**  argv0  argv1  argv2  argv3 argv4
*/
void branch_new(void){
  int rootid;            /* RID of the root check-in - what we branch off of */
  int brid;              /* RID of the branch check-in */
  int noSign;            /* True if the branch is unsigned */
  int i;                 /* Loop counter */
................................................................................

  /* Commit */
  db_end_transaction(0);

  /* Do an autosync push, if requested */
  if( !isPrivate ) autosync_loop(SYNC_PUSH, db_get_int("autosync-tries",1),0);
}












































#if INTERFACE
/*
** Allows bits in the mBplqFlags parameter to branch_prepare_list_query().
*/
#define BRL_CLOSED_ONLY      0x001 /* Show only closed branches */
#define BRL_OPEN_ONLY        0x002 /* Show only open branches */
#define BRL_BOTH             0x003 /* Show both open and closed branches */
#define BRL_OPEN_CLOSED_MASK 0x003
#define BRL_MTIME            0x004 /* Include lastest check-in time */
#define BRL_ORDERBY_MTIME    0x008 /* Sort by MTIME. (otherwise sort by name)*/

#endif /* INTERFACE */

/*
** Prepare a query that will list branches.
**
** If (which<0) then the query pulls only closed branches. If
** (which>0) then the query pulls all (closed and opened)
** branches. Else the query pulls currently-opened branches.
*/
void branch_prepare_list_query(Stmt *pQuery, int brFlags){



  switch( brFlags & BRL_OPEN_CLOSED_MASK ){
    case BRL_CLOSED_ONLY: {

      db_prepare(pQuery,
        "SELECT value FROM tagxref"
        " WHERE tagid=%d AND value NOT NULL "
        "EXCEPT "
        "SELECT value FROM tagxref"
        " WHERE tagid=%d"
        "   AND rid IN leaf"
        "   AND NOT %z"
        " ORDER BY value COLLATE nocase /*sort*/",
        TAG_BRANCH, TAG_BRANCH, leaf_is_closed_sql("tagxref.rid")
      );
      break;
    }
    case BRL_BOTH: {
      db_prepare(pQuery,
        "SELECT DISTINCT value FROM tagxref"
        " WHERE tagid=%d AND value NOT NULL"
        "   AND rid IN leaf"
        " ORDER BY value COLLATE nocase /*sort*/",
        TAG_BRANCH
      );
      break;
    }
    case BRL_OPEN_ONLY: {
      db_prepare(pQuery,
        "SELECT DISTINCT value FROM tagxref"
        " WHERE tagid=%d AND value NOT NULL"
        "   AND rid IN leaf"
        "   AND NOT %z"
        " ORDER BY value COLLATE nocase /*sort*/",
        TAG_BRANCH, leaf_is_closed_sql("tagxref.rid")
      );
      break;
    }
  }










}

/*
** If the branch named in the argument is open, return a RID for one of
** the open leaves of that branch.  If the branch does not exists or is
** closed, return 0.
*/
................................................................................
**
**        Print the name of the branch for the current check-out
**
**    fossil branch info BRANCH-NAME
**
**        Print information about a branch
**
**    fossil branch list|ls ?-a|--all|-c|--closed?
**
**        List all branches.  Use -a or --all to list all branches and
**        -c or --closed to list all closed branches.  The default is to
**        show only open branches.



**
**    fossil branch new BRANCH-NAME BASIS ?OPTIONS?
**
**        Create a new branch BRANCH-NAME off of check-in BASIS.
**        Supported options for this subcommand include:
**        --private             branch is private (i.e., remains local)
**        --bgcolor COLOR       use COLOR instead of automatic background
................................................................................
  }else if( (strncmp(zCmd,"list",n)==0)||(strncmp(zCmd, "ls", n)==0) ){
    Stmt q;
    int vid;
    char *zCurrent = 0;
    int brFlags = BRL_OPEN_ONLY;
    if( find_option("all","a",0)!=0 ) brFlags = BRL_BOTH;
    if( find_option("closed","c",0)!=0 ) brFlags = BRL_CLOSED_ONLY;



    if( g.localOpen ){
      vid = db_lget_int("checkout", 0);
      zCurrent = db_text(0, "SELECT value FROM tagxref"
                            " WHERE rid=%d AND tagid=%d", vid, TAG_BRANCH);
    }
    branch_prepare_list_query(&q, brFlags);
................................................................................
  }else if( strncmp(zCmd,"new",n)==0 ){
    branch_new();
  }else{
    fossil_fatal("branch subcommand should be one of: "
                 "current info list ls new");
  }
}

static const char brlistQuery[] =
@ SELECT
@   tagxref.value,
@   max(event.mtime),
@   EXISTS(SELECT 1 FROM tagxref AS tx
@           WHERE tx.rid=tagxref.rid
@             AND tx.tagid=(SELECT tagid FROM tag WHERE tagname='closed')
@             AND tx.tagtype>0),
@   (SELECT tagxref.value
@      FROM plink CROSS JOIN tagxref
@    WHERE plink.pid=event.objid
@       AND tagxref.rid=plink.cid
@      AND tagxref.tagid=(SELECT tagid FROM tag WHERE tagname='branch')
@      AND tagtype>0),
@   count(*),
@   (SELECT uuid FROM blob WHERE rid=tagxref.rid),
@   event.bgcolor
@  FROM tagxref, tag, event
@ WHERE tagxref.tagid=tag.tagid
@   AND tagxref.tagtype>0
@   AND tag.tagname='branch'
@   AND event.objid=tagxref.rid
@ GROUP BY 1
@ ORDER BY 2 DESC;
;

/*
** This is the new-style branch-list page that shows the branch names
** together with their ages (time of last check-in) and whether or not
** they are closed or merged to another branch.
**
** Control jumps to this routine from brlist_page() (the /brlist handler)
................................................................................
  login_check_credentials();
  if( !g.perm.Read ){ login_needed(g.anon.Read); return; }
  style_header("Branches");
  style_adunit_config(ADUNIT_RIGHT_OK);
  style_submenu_checkbox("colors", "Use Branch Colors", 0, 0);
  login_anonymous_available();

  db_prepare(&q, brlistQuery/*works-like:""*/);

  rNow = db_double(0.0, "SELECT julianday('now')");
  @ <div class="brlist">
  @ <table class='sortable' data-column-types='tkNtt' data-init-sort='2'>
  @ <thead><tr>
  @ <th>Branch Name</th>
  @ <th>Age</th>
  @ <th>Check-ins</th>
  @ <th>Status</th>
  @ <th>Resolution</th>
  @ </tr></thead><tbody>
  while( db_step(&q)==SQLITE_ROW ){
    const char *zBranch = db_column_text(&q, 0);
    double rMtime = db_column_double(&q, 1);
................................................................................
      }
    }
    if( zBgClr && zBgClr[0] && show_colors ){
      @ <tr style="background-color:%s(zBgClr)">
    }else{
      @ <tr>
    }
    @ <td>%z(href("%R/timeline?n=100&r=%T",zBranch))%h(zBranch)</a></td>
    @ <td data-sortkey="%016llx(-iMtime)">%s(zAge)</td>
    @ <td>%d(nCkin)</td>
    fossil_free(zAge);
    @ <td>%s(isClosed?"closed":"")</td>
    if( zMergeTo ){
      @ <td>merged into
      @ %z(href("%R/timeline?f=%!S",zLastCkin))%h(zMergeTo)</a></td>
    }else{
................................................................................
      cnt++;
    }
    if( colorTest ){
      const char *zColor = hash_color(zBr);
      @ <li><span style="background-color: %s(zColor)">
      @ %h(zBr) &rarr; %s(zColor)</span></li>
    }else{
      @ <li>%z(href("%R/timeline?r=%T&n=200",zBr))%h(zBr)</a></li>
    }
  }
  if( cnt ){
    @ </ul>
  }
  db_finalize(&q);
  style_footer();
................................................................................
    "   AND tagxref.tagid=tag.tagid"
    "   AND tagxref.tagtype>0"
    "   AND tag.tagname GLOB 'sym-*'",
    rid
  );
  while( db_step(&q)==SQLITE_ROW ){
    const char *zTagName = db_column_text(&q, 0);
    @ %z(href("%R/timeline?r=%T&n=200",zTagName))[timeline]</a>
  }
  db_finalize(&q);
}

/*
** WEBPAGE: brtimeline
**
** Show a timeline of all branches








*/
void brtimeline_page(void){

  Stmt q;




  login_check_credentials();
  if( !g.perm.Read ){ login_needed(g.anon.Read); return; }

  style_header("Branches");
  style_submenu_element("List", "brlist");
  login_anonymous_available();


  @ <h2>The initial check-in for each branch:</h2>


  db_prepare(&q,
    "%s AND blob.rid IN (SELECT rid FROM tagxref"
    "                     WHERE tagtype>0 AND tagid=%d AND srcid!=0)"







    " ORDER BY event.mtime DESC",







    timeline_query_for_www(), TAG_BRANCH
  );
  www_print_timeline(&q, 0, 0, 0, 0, brtimeline_extra);
  db_finalize(&q);
  style_footer();
}

  }else if( rAge*1440.0<90 ){
    return mprintf("%.1f minutes", rAge*1440.0);
  }else if( rAge*24.0<36 ){
    return mprintf("%.1f hours", rAge*24.0);
  }else if( rAge<365.0 ){
    return mprintf("%.1f days", rAge);
  }else{
    return mprintf("%.2f years", rAge/365.2425);
  }
}

/*
** COMMAND: test-fileage
**
** Usage: %fossil test-fileage CHECKIN

  }else if( rAge*1440.0<90 ){
    return mprintf("%.1f minutes", rAge*1440.0);
  }else if( rAge*24.0<36 ){
    return mprintf("%.1f hours", rAge*24.0);
  }else if( rAge<365.0 ){
    return mprintf("%.1f days", rAge);
  }else{
    return mprintf("%.2f years", rAge/365.0);
  }
}

/*
** COMMAND: test-fileage
**
** Usage: %fossil test-fileage CHECKIN

                 " Should be one of: clear init list status", zCmd);
  }
}

/*
** WEBPAGE: cachestat
**
** Show information about the webpage cache.  Requires Setup privilege.
*/
void cache_page(void){
  sqlite3 *db;
  sqlite3_stmt *pStmt;
  char zBuf[100];

  login_check_credentials();

                 " Should be one of: clear init list status", zCmd);
  }
}

/*
** WEBPAGE: cachestat
**
** Show information about the webpage cache.  Requires Admin privilege.
*/
void cache_page(void){
  sqlite3 *db;
  sqlite3_stmt *pStmt;
  char zBuf[100];

  login_check_credentials();

/*
** The following structure holds descriptions of the various capabilities.
*/
static struct Caps {
  char cCap;              /* The capability letter */
  unsigned short eClass;  /* The "class" for this capability */
  unsigned nUser;         /* Number of users with this capability */
  char *zAbbrev;          /* Abbreviated mnemonic name */
  char *zOneLiner;        /* One-line summary */
} aCap[] = {
  { 'a', CAPCLASS_SUPER, 0,
    "Admin", "Create and delete users" },
  { 'b', CAPCLASS_WIKI|CAPCLASS_TKT, 0,
    "Attach", "Add attchments to wiki or tickets" },
  { 'c', CAPCLASS_TKT, 0,
    "Append-Tkt", "Append to existing tickets" },
  { 'd', CAPCLASS_WIKI|CAPCLASS_TKT, 0,
    "Delete", "Delete wiki or tickets" },
  { 'e', CAPCLASS_DATA, 0,
    "View-PII", "View sensitive info such as email addresses" },
  { 'f', CAPCLASS_WIKI, 0,
    "New-Wiki", "Create new wiki pages" },
  { 'g', CAPCLASS_DATA, 0,
    "Clone", "Clone the repository" },
  { 'h', CAPCLASS_OTHER, 0,
    "Hyperlinks", "Show hyperlinks to detailed repository history" },
  { 'i', CAPCLASS_CODE, 0,
    "Check-In", "Check-in code changes" },
  { 'j', CAPCLASS_WIKI, 0,
    "Read-Wiki", "View wiki pages" },
  { 'k', CAPCLASS_WIKI, 0,
    "Write-Wiki", "Edit wiki pages" },
  { 'l', CAPCLASS_WIKI|CAPCLASS_SUPER, 0,
    "Mod-Wiki", "Moderator for wiki pages" },
  { 'm', CAPCLASS_WIKI, 0,
    "Append-Wiki", "Append to wiki pages" },
  { 'n', CAPCLASS_TKT, 0,
    "New-Tkt", "Create new tickets" },
  { 'o', CAPCLASS_CODE, 0,
    "Check-Out", "Check out code" },
  { 'p', CAPCLASS_OTHER, 0,
    "Password", "Change your own password" },
  { 'q', CAPCLASS_TKT|CAPCLASS_SUPER, 0,
    "Mod-Tkt", "Moderate tickets" },
  { 'r', CAPCLASS_TKT, 0,
    "Read-Tkt", "View tickets" },
  { 's', CAPCLASS_SUPER, 0,
    "Superuser", "Setup and configure the respository" },
  { 't', CAPCLASS_TKT, 0,
    "Reports", "Create new ticket report formats" },
  { 'u', CAPCLASS_OTHER, 0,
    "Reader", "Inherit all the capabilities of the \"reader\" user" },
  { 'v', CAPCLASS_OTHER, 0,
    "Developer", "Inherit all capabilities of the \"developer\" user" },
  { 'w', CAPCLASS_TKT, 0,
    "Write-Tkt", "Edit tickets" },
  { 'x', CAPCLASS_DATA, 0,
    "Private", "Push and/or pull private branches" },
  { 'y', CAPCLASS_SUPER, 0,
    "Write-UV", "Push unversioned content" },
  { 'z', CAPCLASS_CODE, 0,
    "Zip-Download", "Download a ZIP archive, tarball, or SQL archive" },
  { '2', CAPCLASS_FORUM, 0,
    "Forum-Read", "Read forum posts by others" },
  { '3', CAPCLASS_FORUM, 0,
    "Forum-Write", "Create new forum messages" },
  { '4', CAPCLASS_FORUM, 0,
    "Forum-Trusted", "Create forum messages that bypass moderation" },
  { '5', CAPCLASS_FORUM|CAPCLASS_SUPER, 0,
    "Forum-Mod", "Moderator for forum messages" },
  { '6', CAPCLASS_FORUM|CAPCLASS_SUPER, 0,
    "Forum-Admin", "Set or remove capability '4' from other users" },
  { '7', CAPCLASS_ALERT, 0,
    "Alerts", "Sign up for email alerts" },
  { 'A', CAPCLASS_ALERT|CAPCLASS_SUPER, 0,
    "Announce", "Send announcements to all subscribers" },
  { 'D', CAPCLASS_OTHER, 0,
    "Debug", "Enable debugging features" },
};

/*
** Populate the aCap[].nUser values based on the current content
** of the USER table.
*/
void capabilities_count(void){
  int i;
  static int done = 0;
  Stmt q;
  if( done ) return;
  db_prepare(&q, "SELECT fullcap(cap) FROM user");
  while( db_step(&q)==SQLITE_ROW ){
    const char *zCap = db_column_text(&q, 0);
    if( zCap==0 || zCap[0]==0 ) continue;
    for(i=0; i<sizeof(aCap)/sizeof(aCap[0]); i++){
      if( strchr(zCap, aCap[i].cCap) ) aCap[i].nUser++;
    }
  }
  db_finalize(&q);
  done = 1;
}


/*
** Generate HTML that lists all of the capability letters together with
** a brief summary of what each letter means.
*/
void capabilities_table(unsigned mClass){
  int i;
  if( g.perm.Admin ) capabilities_count();
  @ <table>
  @ <tbody>
  for(i=0; i<sizeof(aCap)/sizeof(aCap[0]); i++){
    int n;
    if( (aCap[i].eClass & mClass)==0 ) continue;
    @ <tr><th valign="top">%c(aCap[i].cCap)</th>
    @  <td>%h(aCap[i].zAbbrev)</td><td>%h(aCap[i].zOneLiner)</td>\
    n = aCap[i].nUser;
    if( n && g.perm.Admin ){
      @ <td><a href="%R/setup_ulist?with=%c(aCap[i].cCap)">\
      @ %d(n) user%s(n>1?"s":"")</a></td>\

    }
    @ </tr>
  }
  @ </tbody>
  @ </table>
}

/*
** Generate a "capability summary table" that shows the major capabilities
** against the various user categories.
*/

/*
** The following structure holds descriptions of the various capabilities.
*/
static struct Caps {
  char cCap;              /* The capability letter */
  unsigned short eClass;  /* The "class" for this capability */

  char *zAbbrev;          /* Abbreviated mnemonic name */
  char *zOneLiner;        /* One-line summary */
} aCap[] = {
  { 'a', CAPCLASS_SUPER,
    "Admin", "Create and delete users" },
  { 'b', CAPCLASS_WIKI|CAPCLASS_TKT,
    "Attach", "Add attchments to wiki or tickets" },
  { 'c', CAPCLASS_TKT,
    "Append-Tkt", "Append to existing tickets" },
  { 'd', CAPCLASS_WIKI|CAPCLASS_TKT,
    "Delete", "Delete wiki or tickets" },
  { 'e', CAPCLASS_DATA,
    "View-PII", "View sensitive info such as email addresses" },
  { 'f', CAPCLASS_WIKI,
    "New-Wiki", "Create new wiki pages" },
  { 'g', CAPCLASS_DATA,
    "Clone", "Clone the repository" },
  { 'h', CAPCLASS_OTHER,
    "Hyperlinks", "Show hyperlinks to detailed repository history" },
  { 'i', CAPCLASS_CODE,
    "Check-In", "Check-in code changes" },
  { 'j', CAPCLASS_WIKI,
    "Read-Wiki", "View wiki pages" },
  { 'k', CAPCLASS_WIKI,
    "Write-Wiki", "Edit wiki pages" },
  { 'l', CAPCLASS_WIKI|CAPCLASS_SUPER,
    "Mod-Wiki", "Moderator for wiki pages" },
  { 'm', CAPCLASS_WIKI,
    "Append-Wiki", "Append to wiki pages" },
  { 'n', CAPCLASS_TKT,
    "New-Tkt", "Create new tickets" },
  { 'o', CAPCLASS_CODE,
    "Check-Out", "Check out code" },
  { 'p', CAPCLASS_OTHER,
    "Password", "Change your own password" },
  { 'q', CAPCLASS_TKT|CAPCLASS_SUPER,
    "Mod-Tkt", "Moderate tickets" },
  { 'r', CAPCLASS_TKT,
    "Read-Tkt", "View tickets" },
  { 's', CAPCLASS_SUPER,
    "Superuser", "Setup and configure the respository" },
  { 't', CAPCLASS_TKT,
    "Reports", "Create new ticket report formats" },
  { 'u', CAPCLASS_OTHER,
    "Reader", "Inherit all the capabilities of the \"reader\" user" },
  { 'v', CAPCLASS_OTHER,
    "Developer", "Inherit all capabilities of the \"developer\" user" },
  { 'w', CAPCLASS_TKT,
    "Write-Tkt", "Edit tickets" },
  { 'x', CAPCLASS_DATA,
    "Private", "Push and/or pull private branches" },
  { 'y', CAPCLASS_SUPER,
    "Write-UV", "Push unversioned content" },
  { 'z', CAPCLASS_CODE,
    "Zip-Download", "Download a ZIP archive, tarball, or SQL archive" },
  { '2', CAPCLASS_FORUM,
    "Forum-Read", "Read forum posts by others" },
  { '3', CAPCLASS_FORUM,
    "Forum-Write", "Create new forum messages" },
  { '4', CAPCLASS_FORUM,
    "Forum-Trusted", "Create forum messages that bypass moderation" },
  { '5', CAPCLASS_FORUM|CAPCLASS_SUPER,
    "Forum-Mod", "Moderator for forum messages" },
  { '6', CAPCLASS_FORUM|CAPCLASS_SUPER,
    "Forum-Admin", "Set or remove capability '4' from other users" },
  { '7', CAPCLASS_ALERT,
    "Alerts", "Sign up for email alerts" },
  { 'A', CAPCLASS_ALERT|CAPCLASS_SUPER,
    "Announce", "Send announcements to all subscribers" },
  { 'D', CAPCLASS_OTHER,
    "Debug", "Enable debugging features" },
};























/*
** Generate HTML that lists all of the capability letters together with
** a brief summary of what each letter means.
*/
void capabilities_table(unsigned mClass){
  int i;

  @ <table>

  for(i=0; i<sizeof(aCap)/sizeof(aCap[0]); i++){

    if( (aCap[i].eClass & mClass)==0 ) continue;
    @ <tr><th valign="top">%c(aCap[i].cCap)</th>





    @  <td><i>%h(aCap[i].zAbbrev):</i> %h(aCap[i].zOneLiner)</td></tr>
  }



  @ </table>
}

/*
** Generate a "capability summary table" that shows the major capabilities
** against the various user categories.
*/

** Return true if information is coming from the loopback network.
*/
int cgi_is_loopback(const char *zIpAddr){
  return fossil_strcmp(zIpAddr, "127.0.0.1")==0 ||
         fossil_strcmp(zIpAddr, "::ffff:127.0.0.1")==0 ||
         fossil_strcmp(zIpAddr, "::1")==0;
}

/*
** Return true if the HTTP request is likely to be from a small-screen
** mobile device.
**
** The returned value is a guess.  Use it only for setting up defaults.
*/
int cgi_from_mobile(void){
  const char *zAgent = P("HTTP_USER_AGENT");
  if( zAgent==0 ) return 0;
  if( sqlite3_strglob("*iPad*", zAgent)==0 ) return 0;
  return sqlite3_strlike("%mobile%", zAgent, 0)==0;
}

** Return true if information is coming from the loopback network.
*/
int cgi_is_loopback(const char *zIpAddr){
  return fossil_strcmp(zIpAddr, "127.0.0.1")==0 ||
         fossil_strcmp(zIpAddr, "::ffff:127.0.0.1")==0 ||
         fossil_strcmp(zIpAddr, "::1")==0;
}

    "DELETE FROM vfile WHERE (vid!=%d OR deleted) AND is_selected(id);"
    "DELETE FROM vmerge;"
    "UPDATE vfile SET vid=%d;"
    "UPDATE vfile SET rid=mrid, chnged=0, deleted=0, origname=NULL"
    " WHERE is_selected(id);"
    , vid, nvid
  );
  db_set_checkout(nvid);

  /* Update the isexe and islink columns of the vfile table */
  db_prepare(&q,
    "UPDATE vfile SET isexe=:exec, islink=:link"
    " WHERE vid=:vid AND pathname=:path AND (isexe!=:exec OR islink!=:link)"
  );
  db_bind_int(&q, ":vid", nvid);

    "DELETE FROM vfile WHERE (vid!=%d OR deleted) AND is_selected(id);"
    "DELETE FROM vmerge;"
    "UPDATE vfile SET vid=%d;"
    "UPDATE vfile SET rid=mrid, chnged=0, deleted=0, origname=NULL"
    " WHERE is_selected(id);"
    , vid, nvid
  );
  db_lset_int("checkout", nvid);

  /* Update the isexe and islink columns of the vfile table */
  db_prepare(&q,
    "UPDATE vfile SET isexe=:exec, islink=:link"
    " WHERE vid=:vid AND pathname=:path AND (isexe!=:exec OR islink!=:link)"
  );
  db_bind_int(&q, ":vid", nvid);

  db_multi_exec("DELETE FROM vfile WHERE vid!=%d", vid);
  if( !keepFlag ){
    vfile_to_disk(vid, 0, !g.fQuiet, promptFlag);
  }
  checkout_set_all_exe(vid);
  manifest_to_disk(vid);
  ensure_empty_dirs_created();
  db_set_checkout(vid);
  undo_reset();
  db_multi_exec("DELETE FROM vmerge");
  if( !keepFlag && db_get_boolean("repo-cksum",1) ){
    vfile_aggregate_checksum_manifest(vid, &cksum1, &cksum1b);
    vfile_aggregate_checksum_disk(vid, &cksum2);
    if( blob_compare(&cksum1, &cksum2) ){
      fossil_print("WARNING: manifest checksum does not agree with disk\n");

  db_multi_exec("DELETE FROM vfile WHERE vid!=%d", vid);
  if( !keepFlag ){
    vfile_to_disk(vid, 0, !g.fQuiet, promptFlag);
  }
  checkout_set_all_exe(vid);
  manifest_to_disk(vid);
  ensure_empty_dirs_created();
  db_lset_int("checkout", vid);
  undo_reset();
  db_multi_exec("DELETE FROM vmerge");
  if( !keepFlag && db_get_boolean("repo-cksum",1) ){
    vfile_aggregate_checksum_manifest(vid, &cksum1, &cksum1b);
    vfile_aggregate_checksum_disk(vid, &cksum2);
    if( blob_compare(&cksum1, &cksum2) ){
      fossil_print("WARNING: manifest checksum does not agree with disk\n");

void download_page(void){
  login_check_credentials();
  style_header("Download Page");
  if( !g.perm.Zip ){
    @ <p>Bummer.  You do not have permission to download.
    if( g.zLogin==0 || g.zLogin[0]==0 ){
      @ Maybe it would work better if you
      @ %z(href("%R/login"))logged in</a>.
    }else{
      @ Contact the site administrator and ask them to give
      @ you "Download Zip" privileges.
    }
  }else{
    const char *zDLTag = db_get("download-tag","trunk");
    const char *zNm = db_get("short-project-name","download");
................................................................................
    zUrl = href("%R/sqlar/%t/%t.sqlar", zDLTag, zNm);
    @ <p>SQLite Archive: %z(zUrl)%h(zNm).sqlar</a>
  }
  if( !g.perm.Clone ){
    @ <p>You are not authorized to clone this repository.
    if( g.zLogin==0 || g.zLogin[0]==0 ){
      @ Maybe you would be able to clone if you
      @ %z(href("%R/login"))logged in</a>.
    }else{
      @ Contact the site administrator and ask them to give
      @ you "Clone" privileges in order to clone.
    }
  }else{
    const char *zNm = db_get("short-project-name","clone");
    @ <p>Clone the repository using this command:
    @ <blockquote><pre>
    @ fossil  clone  %s(g.zBaseURL)  %h(zNm).fossil
    @ </pre></blockquote>
  }
  style_footer();
}

void download_page(void){
  login_check_credentials();
  style_header("Download Page");
  if( !g.perm.Zip ){
    @ <p>Bummer.  You do not have permission to download.
    if( g.zLogin==0 || g.zLogin[0]==0 ){
      @ Maybe it would work better if you
      @ <a href="../login">logged in</a>.
    }else{
      @ Contact the site administrator and ask them to give
      @ you "Download Zip" privileges.
    }
  }else{
    const char *zDLTag = db_get("download-tag","trunk");
    const char *zNm = db_get("short-project-name","download");
................................................................................
    zUrl = href("%R/sqlar/%t/%t.sqlar", zDLTag, zNm);
    @ <p>SQLite Archive: %z(zUrl)%h(zNm).sqlar</a>
  }
  if( !g.perm.Clone ){
    @ <p>You are not authorized to clone this repository.
    if( g.zLogin==0 || g.zLogin[0]==0 ){
      @ Maybe you would be able to clone if you
      @ <a href="../login">logged in</a>.
    }else{
      @ Contact the site administrator and ask them to give
      @ you "Clone" privileges in order to clone.
    }
  }else{
    const char *zNm = db_get("short-project-name","clone");
    @ <p>Clone the repository using this command:
    @ <blockquote><pre>
    @ fossil  clone  %s(g.zBaseURL)  %h(zNm).fossil
    @ </pre></blockquote>
  }
  style_footer();
}

/*
** Copyright (c) 2007 D. Richard Hipp
**
** This program is free software; you can redistribute it and/or
** modify it under the terms of the Simplified BSD License (also
** known as the "2-Clause License" or "FreeBSD License".)
**
** This program is distributed in the hope that it will be useful,
** but without any warranty; without even the implied warranty of
** merchantability or fitness for a particular purpose.
**
** Author contact information:
**   drh@hwaci.com
**   http://www.hwaci.com/drh/
................................................................................
  *pMaxChars = COMMENT_LEGACY_LINE_LENGTH - indent;
  return -1;
#endif
}

/*
** This function checks the current line being printed against the original
** comment text.  Upon matching, it updates the provided character and line
** counts, if applicable.  The caller needs to emit a new line, if desired.
*/
static int comment_check_orig(
  const char *zOrigText, /* [in] Original comment text ONLY, may be NULL. */
  const char *zLine,     /* [in] The comment line to print. */
  int *pCharCnt,         /* [in/out] Pointer to the line character count. */
  int *pLineCnt          /* [in/out] Pointer to the total line count. */
){
  if( zOrigText && fossil_strcmp(zLine, zOrigText)==0 ){

    if( pCharCnt ) *pCharCnt = 0;
    if( pLineCnt ) (*pLineCnt)++;
    return 1;
  }
  return 0;
}

................................................................................
** This function scans the specified comment line starting just after the
** initial index and returns the index of the next spacing character -OR-
** zero if such a character cannot be found.  For the purposes of this
** algorithm, the NUL character is treated the same as a spacing character.
*/
static int comment_next_space(
  const char *zLine, /* [in] The comment line being printed. */
  int index,         /* [in] The current character index being handled. */
  int *distUTF8      /* [out] Distance to next space in UTF-8 sequences. */
){
  int nextIndex = index + 1;
  int fNonASCII=0;
  for(;;){
    char c = zLine[nextIndex];
    if( (c&0x80)==0x80 ) fNonASCII=1;
    if( c==0 || fossil_isspace(c) ){
      if( distUTF8 ){
        if( fNonASCII!=0 ){
          *distUTF8 = strlen_utf8(&zLine[index], nextIndex-index);
        }else{
          *distUTF8 = nextIndex-index;
        }
      }
      return nextIndex;
    }
    nextIndex++;
  }
  return 0; /* NOT REACHED */
}

/*
** Count the number of UTF-8 sequences in a string. Incomplete, ill-formed and
** overlong sequences are counted as one sequence. The invalid lead bytes 0xC0
** to 0xC1 and 0xF5 to 0xF7 are allowed to initiate (ill-formed) 2- and 4-byte
** sequences, respectively, the other invalid lead bytes 0xF8 to 0xFF are
** treated as invalid 1-byte sequences (as lone trail bytes).
** Combining characters and East Asian Wide and Fullwidth characters are counted
** as one, so this function does not calculate the effective "display width".
*/
int strlen_utf8(const char *zString, int lengthBytes){
  int i;          /* Counted bytes. */
  int lengthUTF8; /* Counted UTF-8 sequences. */
#if 0
  assert( lengthBytes>=0 );
#endif
  for(i=0, lengthUTF8=0; i<lengthBytes; i++, lengthUTF8++){
    char c = zString[i];
    int cchUTF8=1; /* Code units consumed. */
    int maxUTF8=1; /* Expected sequence length. */
    if( (c&0xe0)==0xc0 )maxUTF8=2;          /* UTF-8 lead byte 110vvvvv */
    else if( (c&0xf0)==0xe0 )maxUTF8=3;     /* UTF-8 lead byte 1110vvvv */
    else if( (c&0xf8)==0xf0 )maxUTF8=4;     /* UTF-8 lead byte 11110vvv */
    while( cchUTF8<maxUTF8 &&
            i<lengthBytes-1 &&
            (zString[i+1]&0xc0)==0x80 ){    /* UTF-8 trail byte 10vvvvvv */
      cchUTF8++;
      i++;
    }
  }
  return lengthUTF8;
}

/*
** This function is called when printing a logical comment line to calculate
** the necessary indenting.  The caller needs to emit the indenting spaces.
*/
static void comment_calc_indent(
  const char *zLine, /* [in] The comment line being printed. */
  int indent,        /* [in] Number of spaces to indent, zero for none. */
  int trimCrLf,      /* [in] Non-zero to trim leading/trailing CR/LF. */
  int trimSpace,     /* [in] Non-zero to trim leading/trailing spaces. */
  int *piIndex       /* [in/out] Pointer to first non-space character. */
){



  if( zLine && piIndex ){
    int index = *piIndex;
    if( trimCrLf ){
      while( zLine[index]=='\r' || zLine[index]=='\n' ){ index++; }
    }
    if( trimSpace ){
      while( fossil_isspace(zLine[index]) ){ index++; }
................................................................................
  int trimCrLf,          /* [in] Non-zero to trim leading/trailing CR/LF. */
  int trimSpace,         /* [in] Non-zero to trim leading/trailing spaces. */
  int wordBreak,         /* [in] Non-zero to try breaking on word boundaries. */
  int origBreak,         /* [in] Non-zero to break before original comment. */
  int *pLineCnt,         /* [in/out] Pointer to the total line count. */
  const char **pzLine    /* [out] Pointer to the end of the logical line. */
){
  int index = 0, charCnt = 0, lineCnt = 0, maxChars, i;
  char zBuf[400]; int iBuf=0; /* Output buffer and counter. */
  int cchUTF8, maxUTF8;       /* Helper variables to count UTF-8 sequences. */
  if( !zLine ) return;
  if( lineChars<=0 ) return;
#if 0
  assert( indent<sizeof(zBuf)-5 );       /* See following comments to explain */
  assert( origIndent<sizeof(zBuf)-5 );   /* these limits. */
#endif
  if( indent>sizeof(zBuf)-6 ){
    /* Limit initial indent to fit output buffer. */
    indent = sizeof(zBuf)-6;
  }
  comment_calc_indent(zLine, indent, trimCrLf, trimSpace, &index);
  if( indent>0 ){
    for(i=0; i<indent; i++){
      zBuf[iBuf++] = ' ';
    }
  }
  if( origIndent>sizeof(zBuf)-6 ){
    /* Limit line indent to fit output buffer. */
    origIndent = sizeof(zBuf)-6;
  }
  maxChars = lineChars;
  for(;;){
    int useChars = 1;
    char c = zLine[index];
    /* Flush the output buffer if there's no space left for at least one more
    ** (potentially 4-byte) UTF-8 sequence, one level of indentation spaces,
    ** a new line, and a terminating NULL. */
    if( iBuf>sizeof(zBuf)-origIndent-6 ){
      zBuf[iBuf]=0;
      iBuf=0;
      fossil_print("%s", zBuf);
    }
    if( c==0 ){
      break;
    }else{
      if( origBreak && index>0 ){
        const char *zCurrent = &zLine[index];
        if( comment_check_orig(zOrigText, zCurrent, &charCnt, &lineCnt) ){
          zBuf[iBuf++] = '\n';
          comment_calc_indent(zLine, origIndent, trimCrLf, trimSpace, &index);
          for( i=0; i<origIndent; i++ ){
            zBuf[iBuf++] = ' ';
          }

          maxChars = lineChars;
        }
      }
      index++;
    }
    if( c=='\n' ){
      lineCnt++;
      charCnt = 0;
      useChars = 0;
    }else if( c=='\t' ){
      int distUTF8;
      int nextIndex = comment_next_space(zLine, index, &distUTF8);
      if( nextIndex<=0 || distUTF8>maxChars ){
        break;
      }
      charCnt++;
      useChars = COMMENT_TAB_WIDTH;
      if( maxChars<useChars ){
        zBuf[iBuf++] = ' ';
        break;
      }
    }else if( wordBreak && fossil_isspace(c) ){
      int distUTF8;
      int nextIndex = comment_next_space(zLine, index, &distUTF8);
      if( nextIndex<=0 || distUTF8>maxChars ){
        break;
      }
      charCnt++;
    }else{
      charCnt++;
    }
    assert( c!='\n' || charCnt==0 );
    zBuf[iBuf++] = c;
    /* Skip over UTF-8 sequences, see comment on strlen_utf8() for details. */
    cchUTF8=1; /* Code units consumed. */
    maxUTF8=1; /* Expected sequence length. */
    if( (c&0xe0)==0xc0 )maxUTF8=2;          /* UTF-8 lead byte 110vvvvv */
    else if( (c&0xf0)==0xe0 )maxUTF8=3;     /* UTF-8 lead byte 1110vvvv */
    else if( (c&0xf8)==0xf0 )maxUTF8=4;     /* UTF-8 lead byte 11110vvv */
    while( cchUTF8<maxUTF8 &&
            (zLine[index]&0xc0)==0x80 ){    /* UTF-8 trail byte 10vvvvvv */
      cchUTF8++;
      zBuf[iBuf++] = zLine[index++];
    }
    maxChars -= useChars;
    if( maxChars<=0 ) break;
    if( c=='\n' ) break;
  }
  if( charCnt>0 ){
    zBuf[iBuf++] = '\n';
    lineCnt++;
  }
  /* Flush the remaining output buffer. */
  if( iBuf>0 ){
    zBuf[iBuf]=0;
    iBuf=0;
    fossil_print("%s", zBuf);
  }
  if( pLineCnt ){
    *pLineCnt += lineCnt;
  }
  if( pzLine ){
    *pzLine = zLine + index;
  }
}
................................................................................
*/
static int comment_print_legacy(
  const char *zText, /* The comment text to be printed. */
  int indent,        /* Number of spaces to indent each non-initial line. */
  int width          /* Maximum number of characters per line. */
){
  int maxChars = width - indent;
  int si, sk, i, k, kc;
  int doIndent = 0;
  char *zBuf;
  char zBuffer[400];
  int lineCnt = 0;
  int cchUTF8, maxUTF8; /* Helper variables to count UTF-8 sequences. */

  if( width<0 ){
    comment_set_maxchars(indent, &maxChars);
  }
  if( zText==0 ) zText = "(NULL)";
  if( maxChars<=0 ){
    maxChars = strlen(zText);
  }
  /* Ensure the buffer can hold the longest-possible UTF-8 sequences. */
  if( maxChars >= (sizeof(zBuffer)/4-1) ){
    zBuf = fossil_malloc(maxChars*4+1);
  }else{
    zBuf = zBuffer;
  }
  for(;;){
    while( fossil_isspace(zText[0]) ){ zText++; }
    if( zText[0]==0 ){
      if( doIndent==0 ){
        fossil_print("\n");
        lineCnt = 1;
      }
      if( zBuf!=zBuffer) fossil_free(zBuf);
      return lineCnt;
    }
    for(sk=si=i=k=kc=0; zText[i] && kc<maxChars; i++){
      char c = zText[i];
      kc++; /* Count complete UTF-8 sequences. */
      /* Skip over UTF-8 sequences, see comment on strlen_utf8() for details. */
      cchUTF8=1; /* Code units consumed. */
      maxUTF8=1; /* Expected sequence length. */
      if( (c&0xe0)==0xc0 )maxUTF8=2;        /* UTF-8 lead byte 110vvvvv */
      else if( (c&0xf0)==0xe0 )maxUTF8=3;   /* UTF-8 lead byte 1110vvvv */
      else if( (c&0xf8)==0xf0 )maxUTF8=4;   /* UTF-8 lead byte 11110vvv */
      if( maxUTF8>1 ){
        zBuf[k++] = c;
        while( cchUTF8<maxUTF8 &&
                (zText[i+1]&0xc0)==0x80 ){  /* UTF-8 trail byte 10vvvvvv */
          cchUTF8++;
          zBuf[k++] = zText[++i];
        }
      }
      else if( fossil_isspace(c) ){
        si = i;
        sk = k;
        if( k==0 || zBuf[k-1]!=' ' ){
          zBuf[k++] = ' ';
        }
      }else{
        zBuf[k] = c;

/*
** Copyright (c) 2007 D. Richard Hipp
**
** This program is free software; you can redistribute it and/or
** modify it under the terms of the Simplified BSD License (also
** known as the "2-Clause License" or "FreeBSD License".)

** This program is distributed in the hope that it will be useful,
** but without any warranty; without even the implied warranty of
** merchantability or fitness for a particular purpose.
**
** Author contact information:
**   drh@hwaci.com
**   http://www.hwaci.com/drh/
................................................................................
  *pMaxChars = COMMENT_LEGACY_LINE_LENGTH - indent;
  return -1;
#endif
}

/*
** This function checks the current line being printed against the original
** comment text.  Upon matching, it emits a new line and updates the provided
** character and line counts, if applicable.
*/
static int comment_check_orig(
  const char *zOrigText, /* [in] Original comment text ONLY, may be NULL. */
  const char *zLine,     /* [in] The comment line to print. */
  int *pCharCnt,         /* [in/out] Pointer to the line character count. */
  int *pLineCnt          /* [in/out] Pointer to the total line count. */
){
  if( zOrigText && fossil_strcmp(zLine, zOrigText)==0 ){
    fossil_print("\n");
    if( pCharCnt ) *pCharCnt = 0;
    if( pLineCnt ) (*pLineCnt)++;
    return 1;
  }
  return 0;
}

................................................................................
** This function scans the specified comment line starting just after the
** initial index and returns the index of the next spacing character -OR-
** zero if such a character cannot be found.  For the purposes of this
** algorithm, the NUL character is treated the same as a spacing character.
*/
static int comment_next_space(
  const char *zLine, /* [in] The comment line being printed. */
  int index          /* [in] The current character index being handled. */

){
  int nextIndex = index + 1;

  for(;;){
    char c = zLine[nextIndex];

    if( c==0 || fossil_isspace(c) ){







      return nextIndex;
    }
    nextIndex++;
  }
  return 0; /* NOT REACHED */
}

/*
































** This function is called when printing a logical comment line to perform
** the necessary indenting.
*/
static void comment_print_indent(
  const char *zLine, /* [in] The comment line being printed. */
  int indent,        /* [in] Number of spaces to indent, zero for none. */
  int trimCrLf,      /* [in] Non-zero to trim leading/trailing CR/LF. */
  int trimSpace,     /* [in] Non-zero to trim leading/trailing spaces. */
  int *piIndex       /* [in/out] Pointer to first non-space character. */
){
  if( indent>0 ){
    fossil_print("%*s", indent, "");
  }
  if( zLine && piIndex ){
    int index = *piIndex;
    if( trimCrLf ){
      while( zLine[index]=='\r' || zLine[index]=='\n' ){ index++; }
    }
    if( trimSpace ){
      while( fossil_isspace(zLine[index]) ){ index++; }
................................................................................
  int trimCrLf,          /* [in] Non-zero to trim leading/trailing CR/LF. */
  int trimSpace,         /* [in] Non-zero to trim leading/trailing spaces. */
  int wordBreak,         /* [in] Non-zero to try breaking on word boundaries. */
  int origBreak,         /* [in] Non-zero to break before original comment. */
  int *pLineCnt,         /* [in/out] Pointer to the total line count. */
  const char **pzLine    /* [out] Pointer to the end of the logical line. */
){
  int index = 0, charCnt = 0, lineCnt = 0, maxChars;


  if( !zLine ) return;
  if( lineChars<=0 ) return;








  comment_print_indent(zLine, indent, trimCrLf, trimSpace, &index);









  maxChars = lineChars;
  for(;;){
    int useChars = 1;
    char c = zLine[index];








    if( c==0 ){
      break;
    }else{
      if( origBreak && index>0 ){
        const char *zCurrent = &zLine[index];
        if( comment_check_orig(zOrigText, zCurrent, &charCnt, &lineCnt) ){

          comment_print_indent(zCurrent, origIndent, trimCrLf, trimSpace,



                               &index);
          maxChars = lineChars;
        }
      }
      index++;
    }
    if( c=='\n' ){
      lineCnt++;
      charCnt = 0;
      useChars = 0;
    }else if( c=='\t' ){

      int nextIndex = comment_next_space(zLine, index);
      if( nextIndex<=0 || (nextIndex-index)>maxChars ){
        break;
      }
      charCnt++;
      useChars = COMMENT_TAB_WIDTH;
      if( maxChars<useChars ){
        fossil_print(" ");
        break;
      }
    }else if( wordBreak && fossil_isspace(c) ){

      int nextIndex = comment_next_space(zLine, index);
      if( nextIndex<=0 || (nextIndex-index)>maxChars ){
        break;
      }
      charCnt++;
    }else{
      charCnt++;
    }
    assert( c!='\n' || charCnt==0 );
    fossil_print("%c", c);











    if( (c&0x80)==0 || (zLine[index+1]&0xc0)!=0xc0 ) maxChars -= useChars;
    if( maxChars<=0 ) break;
    if( c=='\n' ) break;
  }
  if( charCnt>0 ){
    fossil_print("\n");
    lineCnt++;
  }






  if( pLineCnt ){
    *pLineCnt += lineCnt;
  }
  if( pzLine ){
    *pzLine = zLine + index;
  }
}
................................................................................
*/
static int comment_print_legacy(
  const char *zText, /* The comment text to be printed. */
  int indent,        /* Number of spaces to indent each non-initial line. */
  int width          /* Maximum number of characters per line. */
){
  int maxChars = width - indent;
  int si, sk, i, k;
  int doIndent = 0;
  char *zBuf;
  char zBuffer[400];
  int lineCnt = 0;


  if( width<0 ){
    comment_set_maxchars(indent, &maxChars);
  }
  if( zText==0 ) zText = "(NULL)";
  if( maxChars<=0 ){
    maxChars = strlen(zText);
  }

  if( maxChars >= (sizeof(zBuffer)) ){
    zBuf = fossil_malloc(maxChars+1);
  }else{
    zBuf = zBuffer;
  }
  for(;;){
    while( fossil_isspace(zText[0]) ){ zText++; }
    if( zText[0]==0 ){
      if( doIndent==0 ){
        fossil_print("\n");
        lineCnt = 1;
      }
      if( zBuf!=zBuffer) fossil_free(zBuf);
      return lineCnt;
    }
    for(sk=si=i=k=0; zText[i] && k<maxChars; i++){
      char c = zText[i];















      if( fossil_isspace(c) ){
        si = i;
        sk = k;
        if( k==0 || zBuf[k-1]!=' ' ){
          zBuf[k++] = ' ';
        }
      }else{
        zBuf[k] = c;

      }
      blob_append_sql(&sql, "REPLACE INTO ");
    }else{
      blob_append_sql(&sql, "INSERT OR IGNORE INTO ");
    }
    blob_append_sql(&sql, "\"%w\"(\"%w\",mtime",
         &zName[1], aType[ii].zPrimKey);
    if( fossil_stricmp(zName,"/subscriber")==0 ) alert_schema(0);
    for(jj=2; jj<nToken; jj+=2){
       blob_append_sql(&sql, ",\"%w\"", azToken[jj]);
    }
    blob_append_sql(&sql,") VALUES(%s,%s",
       azToken[1] /*safe-for-%s*/, azToken[0]/*safe-for-%s*/);
    for(jj=2; jj<nToken; jj+=2){
       blob_append_sql(&sql, ",%s", azToken[jj+1] /*safe-for-%s*/);

      }
      blob_append_sql(&sql, "REPLACE INTO ");
    }else{
      blob_append_sql(&sql, "INSERT OR IGNORE INTO ");
    }
    blob_append_sql(&sql, "\"%w\"(\"%w\",mtime",
         &zName[1], aType[ii].zPrimKey);
    if( fossil_stricmp(zName,"/subscriber") ) alert_schema(0);
    for(jj=2; jj<nToken; jj+=2){
       blob_append_sql(&sql, ",\"%w\"", azToken[jj]);
    }
    blob_append_sql(&sql,") VALUES(%s,%s",
       azToken[1] /*safe-for-%s*/, azToken[0]/*safe-for-%s*/);
    for(jj=2; jj<nToken; jj+=2){
       blob_append_sql(&sql, ",%s", azToken[jj+1] /*safe-for-%s*/);

  else
#endif /* FOSSIL_ENABLE_JSON */
  if( g.xferPanic && g.cgiOutput==1 ){
    cgi_reset_content();
    @ error Database\serror:\s%F(z)
    cgi_reply();
  }
  fossil_fatal("Database error: %s", z);
}

/*
** All static variable that a used by only this file are gathered into
** the following structure.
*/
static struct DbLocalData {
................................................................................
    db_set_int("hash-policy", g.eHashPolicy, 0);
  }

  /* Make a change to the CHECK constraint on the BLOB table for
  ** version 2.0 and later.
  */
  rebuild_schema_update_2_0();   /* Do the Fossil-2.0 schema updates */

  /* If the checkout database was opened first, then check to make
  ** sure that the repository database that was just opened has not
  ** be replaced by a clone of the same project, with different RID
  ** values.
  */
  if( g.localOpen && !db_fingerprint_ok() ){
    fossil_print(
      "Oops. It looks like the repository database file located at\n"
      "    \"%s\"\n", zDbName
    );
    fossil_print(
      "has been swapped with a clone that may have different\n"
      "integer keys for the various artifacts. As of 2019-01-11,\n"
      "we are working on enhancing Fossil to be able to deal with\n"
      "that automatically, but we are not there yet. Sorry.\n\n"
    );
    fossil_print(
      "As an interim workaround, try:\n"
      "  %s close --force\n"
      "  %s open \"%s\" --keep\n"
      "Noting that any STASH and UNDO information "
      "WILL BE IRREVOCABLY LOST.\n\n",
      g.argv[0],
      g.argv[0], zDbName
    );
    fossil_fatal("bad fingerprint");
  }
}

/*
** Return true if there have been any changes to the repository
** database since it was opened.
**
** Changes to "config" and "localdb" and "temp" do not count.
................................................................................
    ** point, this will probably be the setting value from the
    ** repository or global configuration databases. */
    g.allowSymlinks = db_get_boolean("allow-symlinks",
                                     db_allow_symlinks_by_default());
  }
  db_lset("repository", g.argv[2]);
  db_record_repository_filename(g.argv[2]);
  db_set_checkout(0);
  azNewArgv[0] = g.argv[0];
  g.argv = azNewArgv;
  if( !emptyFlag ){
    g.argc = 3;
    if( g.zOpenRevision ){
      azNewArgv[g.argc-1] = g.zOpenRevision;
    }else{
................................................................................
*/
/*
** SETTING: backoffice-nodelay boolean default=off
** If backoffice-nodelay is true, then the backoffice processing
** will never invoke sleep().  If it has nothing useful to do,
** it simply exits.
*/
/*
** SETTING: backoffice-disable boolean default=off
** If backoffice-disable is true, then the automatic backoffice
** processing is disabled.  Automatic backoffice processing is the
** backoffice work that normally runs after each web page is
** rendered.  Backoffice processing that is triggered by the
** "fossil backoffice" command is unaffected by this setting.
**
** Backoffice processing does things such as delivering
** email notifications.  So if this setting is true, and if
** there is no cron job periodically running "fossil backoffice",
** email notifications and other work normally done by the
** backoffice will not occur.
*/
/*
** SETTING: backoffice-logfile width=40
** If backoffice-logfile is not an empty string and is a valid
** filename, then a one-line message is appended to that file
** every time the backoffice runs.  This can be used for debugging,
** to ensure that backoffice is running appropriately.
*/
................................................................................
/*
** SETTING: keep-glob        width=40 versionable block-text
** The value is a comma or newline-separated list of GLOB
** patterns specifying files that the "clean" command will keep.
*/
/*
** SETTING: localauth        boolean default=off
** If enabled, require that HTTP connections from the loopback
** address (127.0.0.1) be authenticated by password.  If false,
** some HTTP requests might be granted full "Setup" user
** privileges without having to present login credentials.
** This mechanism allows the "fossil ui" command to provide
** full access to the repository without requiring the user to
** log in first.
**
** In order for full "Setup" privilege to be granted without a
** login, the following conditions must be met:
**
**   (1)  This setting ("localauth") must be off
**   (2)  The HTTP request arrive over the loopback TCP/IP
**        address (127.0.01) or else via SSH.
**   (3)  The request must be HTTP, not HTTPS. (This
**        restriction is designed to help prevent accidentally
**        providing "Setup" privileges to requests arriving
**        over a reverse proxy.)
**   (4)  The command that launched the fossil server must be
**        one of the following:
**        (a) "fossil ui"
**        (b) "fossil server" with the --localauth option
**        (c) "fossil http" with the --localauth option
**        (d) CGI with the "localauth" setting in the cgi script.
**
** For maximum security, set "localauth" to 1.  However, because
** of the other restrictions (2) through (4), it should be safe
** to leave "localauth" set to 0 in most installations, and 
** especially on cloned repositories on workstations. Leaving
** "localauth" at 0 makes the "fossil ui" command more convenient
** to use.
*/
/*
** SETTING: main-branch      width=40 default=trunk
** The value is the primary branch for the project.
*/
/*
** SETTING: manifest         width=5 versionable
................................................................................
*/
void test_database_name_cmd(void){
  db_find_and_open_repository(OPEN_ANY_SCHEMA, 0);
  fossil_print("Repository database: %s\n", g.zRepositoryName);
  fossil_print("Local database:      %s\n", g.zLocalDbName);
  fossil_print("Config database:     %s\n", g.zConfigDbName);
}

/*
** Compute a "fingerprint" on the repository.  A fingerprint is used
** to verify that that the repository has not been replaced by a clone
** of the same repository.  More precisely, a fingerprint are used to
** verify that the mapping between SHA3 hashes and RID values is unchanged.
**
** The checkout database ("localdb") stores RID values.  When associating
** a checkout database against a repository database, it is useful to verify
** the fingerprint so that we know tha the RID values in the checkout
** database still correspond to the correct entries in the BLOB table of
** the repository.
**
** The fingerprint is based on the RCVFROM table.  When constructing a
** new fingerprint, use the most recent RCVFROM entry.  (Set rcvid==0 to
** accomplish this.)  When verifying an old fingerprint, use the same
** RCVFROM entry that generated the fingerprint in the first place.
**
** The fingerprint consists of the rcvid, a "/", and the MD5 checksum of
** the remaining fields of the RCVFROM table entry.  MD5 is used for this
** because it is 4x faster than SHA3 and 5x faster than SHA1, and there
** are no security concerns - this is just a checksum, not a security
** token.
*/
char *db_fingerprint(int rcvid){
  char *z = 0;
  Blob sql = BLOB_INITIALIZER;
  Stmt q;
  blob_append_sql(&sql,
    "SELECT rcvid, quote(uid), quote(mtime), quote(nonce), quote(ipaddr)"
    "  FROM rcvfrom"
  );
  if( rcvid<=0 ){
    blob_append_sql(&sql, " ORDER BY rcvid DESC LIMIT 1");
  }else{
    blob_append_sql(&sql, " WHERE rcvid=%d", rcvid);
  }
  db_prepare_blob(&q, &sql);
  blob_reset(&sql);
  if( db_step(&q)==SQLITE_ROW ){
    int i;
    md5sum_init();
    for(i=1; i<=4; i++){
      md5sum_step_text(db_column_text(&q,i),-1);
    }
    z = mprintf("%d/%s",db_column_int(&q,0),md5sum_finish(0));
  }
  db_finalize(&q);
  return z;
}

/*
** COMMAND: test-fingerprint
**
** Usage: %fossil test-fingerprint ?RCVID? ?--check?
**
** Display the repository fingerprint.  Or if the --check option
** is provided and this command is run from a checkout, invoke the
** db_fingerprint_ok() method and print its result.
*/
void test_fingerprint(void){
  int rcvid = 0;
  if( find_option("check",0,0)!=0 ){
    db_must_be_within_tree();
    fossil_print("db_fingerprint_ok() => %d\n", db_fingerprint_ok());
    return;
  }
  db_find_and_open_repository(OPEN_ANY_SCHEMA,0);
  if( g.argc==3 ){
    rcvid = atoi(g.argv[2]);
  }else if( g.argc!=2 ){
    fossil_fatal("wrong number of arguments");
  } 
  fossil_print("%z\n", db_fingerprint(rcvid));
}

/*
** Set the value of the "checkout" entry in the VVAR table.
**
** Also set "fingerprint" and "checkout-hash".
*/
void db_set_checkout(int rid){
  char *z;
  db_lset_int("checkout", rid);
  z = db_text(0,"SELECT uuid FROM blob WHERE rid=%d",rid);
  db_lset("checkout-hash", z);
  fossil_free(z);
  z = db_fingerprint(0);
  db_lset("fingerprint", z);
  fossil_free(z);
}

/*
** Verify that the fingerprint recorded in the "fingerprint" entry
** of the VVAR table matches the fingerprint on the currently
** connected repository.  Return true if the fingerprint is ok, and
** return false if the fingerprint does not match.
*/
int db_fingerprint_ok(void){
  char *zCkout;   /* The fingerprint recorded in the checkout database */
  char *zRepo;    /* The fingerprint of the repository */
  int rc;         /* Result */

  zCkout = db_text(0,"SELECT value FROM localdb.vvar WHERE name='fingerprint'");
  if( zCkout==0 ){
    /* This is an older checkout that does not record a fingerprint.
    ** We have to assume everything is ok */
    return 2;
  }
  zRepo = db_fingerprint(atoi(zCkout));
  rc = fossil_strcmp(zCkout,zRepo)==0;
  fossil_free(zCkout);
  fossil_free(zRepo);
  return rc;
}

  else
#endif /* FOSSIL_ENABLE_JSON */
  if( g.xferPanic && g.cgiOutput==1 ){
    cgi_reset_content();
    @ error Database\serror:\s%F(z)
    cgi_reply();
  }
  fossil_panic("Database error: %s", z);
}

/*
** All static variable that a used by only this file are gathered into
** the following structure.
*/
static struct DbLocalData {
................................................................................
    db_set_int("hash-policy", g.eHashPolicy, 0);
  }

  /* Make a change to the CHECK constraint on the BLOB table for
  ** version 2.0 and later.
  */
  rebuild_schema_update_2_0();   /* Do the Fossil-2.0 schema updates */




























}

/*
** Return true if there have been any changes to the repository
** database since it was opened.
**
** Changes to "config" and "localdb" and "temp" do not count.
................................................................................
    ** point, this will probably be the setting value from the
    ** repository or global configuration databases. */
    g.allowSymlinks = db_get_boolean("allow-symlinks",
                                     db_allow_symlinks_by_default());
  }
  db_lset("repository", g.argv[2]);
  db_record_repository_filename(g.argv[2]);
  db_lset_int("checkout", 0);
  azNewArgv[0] = g.argv[0];
  g.argv = azNewArgv;
  if( !emptyFlag ){
    g.argc = 3;
    if( g.zOpenRevision ){
      azNewArgv[g.argc-1] = g.zOpenRevision;
    }else{
................................................................................
*/
/*
** SETTING: backoffice-nodelay boolean default=off
** If backoffice-nodelay is true, then the backoffice processing
** will never invoke sleep().  If it has nothing useful to do,
** it simply exits.
*/














/*
** SETTING: backoffice-logfile width=40
** If backoffice-logfile is not an empty string and is a valid
** filename, then a one-line message is appended to that file
** every time the backoffice runs.  This can be used for debugging,
** to ensure that backoffice is running appropriately.
*/
................................................................................
/*
** SETTING: keep-glob        width=40 versionable block-text
** The value is a comma or newline-separated list of GLOB
** patterns specifying files that the "clean" command will keep.
*/
/*
** SETTING: localauth        boolean default=off
** If enabled, require that HTTP connections from
** 127.0.0.1 be authenticated by password.  If
** false, all HTTP requests from localhost have


** unrestricted access to the repository.

























*/
/*
** SETTING: main-branch      width=40 default=trunk
** The value is the primary branch for the project.
*/
/*
** SETTING: manifest         width=5 versionable
................................................................................
*/
void test_database_name_cmd(void){
  db_find_and_open_repository(OPEN_ANY_SCHEMA, 0);
  fossil_print("Repository database: %s\n", g.zRepositoryName);
  fossil_print("Local database:      %s\n", g.zLocalDbName);
  fossil_print("Config database:     %s\n", g.zConfigDbName);
}

}
.tl-arrow.merge.r {
  border-left: 3px solid #000;
}
.tl-line.merge {
  width: 1px;
}
.tl-arrow.cherrypick {
  height: 1px;
  border-width: 2px 0;
}
.tl-arrow.cherrypick.l {
  border-right: 3px solid #000;
}
.tl-arrow.cherrypick.r {
  border-left: 3px solid #000;
}
.tl-line.cherrypick.h {
  width: 0px;
  border-top: 1px dashed #000;
  border-left: 0px dashed #000;
  background: #fff;
}
.tl-line.cherrypick.v {
  width: 0px;
  border-top: 0px dashed #000;
  border-left: 1px dashed #000;
  background: #fff;
}
.tl-arrow.warp {
  margin-left: 1px;
  border-width: 3px 0;
  border-left: 7px solid #600000;
}
.tl-line.warp {
  background: #600000;
................................................................................
  padding: 0 0 0 1em;
}
div.columns > ul li:first-child {
  margin-top:0px;
}
.columns li {
  break-inside: avoid;
  page-break-inside: avoid;
}
.filetree {
  margin: 1em 0;
  line-height: 1.5;
}
.filetree > ul {
  display: inline-block;

}
.tl-arrow.merge.r {
  border-left: 3px solid #000;
}
.tl-line.merge {
  width: 1px;
}






















.tl-arrow.warp {
  margin-left: 1px;
  border-width: 3px 0;
  border-left: 7px solid #600000;
}
.tl-line.warp {
  background: #600000;
................................................................................
  padding: 0 0 0 1em;
}
div.columns > ul li:first-child {
  margin-top:0px;
}
.columns li {
  break-inside: avoid;

}
.filetree {
  margin: 1em 0;
  line-height: 1.5;
}
.filetree > ul {
  display: inline-block;

** "closed leaf" is a leaf that has a "closed" tag.  An "open leaf"
** is a leaf without a "closed" tag.
**
** Query parameters:
**
**     all           Show all leaves
**     closed        Show only closed leaves
**     ng            No graph
**     nohidden      Hide check-ins with "hidden" tag
**     onlyhidden    Show only check-ins with "hidden" tag
**     brbg          Background color by branch name
**     ubg           Background color by user name
*/
void leaves_page(void){
  Blob sql;
  Stmt q;
  int showAll = P("all")!=0;
  int showClosed = P("closed")!=0;
  int fNg = PB("ng")!=0;           /* Flag for the "ng" query parameter */
  int fNoHidden = PB("nohidden")!=0;      /* "nohidden" query parameter */
  int fOnlyHidden = PB("onlyhidden")!=0;  /* "onlyhidden" query parameter */
  int fBrBg = PB("brbg")!=0;       /* Flag for the "brbg" query parameter */
  int fUBg = PB("ubg")!=0;         /* Flag for the "ubg" query parameter */
  HQuery url;                      /* URL to /leaves plus query parameters */
  int tmFlags;                     /* Timeline display flags */

  login_check_credentials();
  if( !g.perm.Read ){ login_needed(g.anon.Read); return; }
  url_initialize(&url, "leaves");
  if( fNg ) url_add_parameter(&url, "ng", "");
  if( fNoHidden ) url_add_parameter(&url, "nohidden", "");
  if( fOnlyHidden ) url_add_parameter(&url, "onlyhidden", "");
  if( fBrBg ) url_add_parameter(&url, "brbg", "");
  if( fUBg ) url_add_parameter(&url, "ubg", "");

  if( !showAll ){
    style_submenu_element("All", "%s", url_render(&url, "all", "", 0, 0));
  }
  if( !showClosed ){
    style_submenu_element("Closed", "%s", url_render(&url, "closed", "", 0, 0));
  }
  if( showClosed || showAll ){
    style_submenu_element("Open", "%s", url_render(&url, 0, 0, 0, 0));
  }
  url_reset(&url);
  style_header("Leaves");
  login_anonymous_available();
  timeline_ss_submenu();
  cookie_render();
#if 0
  style_sidebox_begin("Nomenclature:", "33%");
  @ <ol>
  @ <li> A <div class="sideboxDescribed">leaf</div>
  @ is a check-in with no descendants in the same branch.</li>
  @ <li> An <div class="sideboxDescribed">open leaf</div>
  @ is a leaf that does not have a "closed" tag
................................................................................
  blob_append(&sql, timeline_query_for_www(), -1);
  blob_append_sql(&sql, " AND blob.rid IN leaf");
  if( showClosed ){
    blob_append_sql(&sql," AND %z", leaf_is_closed_sql("blob.rid"));
  }else if( !showAll ){
    blob_append_sql(&sql," AND NOT %z", leaf_is_closed_sql("blob.rid"));
  }
  if( fNoHidden || fOnlyHidden ){
    const char* zUnaryOp = fNoHidden ? "NOT" : "";
    blob_append_sql(&sql,
      " AND %s EXISTS(SELECT 1 FROM tagxref"
      " WHERE tagid=%d AND tagtype>0 AND rid=blob.rid)\n",
      zUnaryOp/*safe-for-%s*/, TAG_HIDDEN);
  }
  db_prepare(&q, "%s ORDER BY event.mtime DESC", blob_sql_text(&sql));
  blob_reset(&sql);
  /* Always specify TIMELINE_DISJOINT, or graph_finish() may fail because of too
  ** many descenders to (off-screen) parents. */
  tmFlags = TIMELINE_LEAFONLY | TIMELINE_DISJOINT | TIMELINE_NOSCROLL;
  if( fNg==0 ) tmFlags |= TIMELINE_GRAPH;
  if( fBrBg ) tmFlags |= TIMELINE_BRCOLOR;
  if( fUBg ) tmFlags |= TIMELINE_UCOLOR;
  www_print_timeline(&q, tmFlags, 0, 0, 0, 0);
  db_finalize(&q);
  @ <br />
  style_footer();
}

#if INTERFACE
/* Flag parameters to compute_uses_file() */

** "closed leaf" is a leaf that has a "closed" tag.  An "open leaf"
** is a leaf without a "closed" tag.
**
** Query parameters:
**
**     all           Show all leaves
**     closed        Show only closed leaves





*/
void leaves_page(void){
  Blob sql;
  Stmt q;
  int showAll = P("all")!=0;
  int showClosed = P("closed")!=0;








  login_check_credentials();
  if( !g.perm.Read ){ login_needed(g.anon.Read); return; }







  if( !showAll ){
    style_submenu_element("All", "leaves?all");
  }
  if( !showClosed ){
    style_submenu_element("Closed", "leaves?closed");
  }
  if( showClosed || showAll ){
    style_submenu_element("Open", "leaves");
  }

  style_header("Leaves");
  login_anonymous_available();


#if 0
  style_sidebox_begin("Nomenclature:", "33%");
  @ <ol>
  @ <li> A <div class="sideboxDescribed">leaf</div>
  @ is a check-in with no descendants in the same branch.</li>
  @ <li> An <div class="sideboxDescribed">open leaf</div>
  @ is a leaf that does not have a "closed" tag
................................................................................
  blob_append(&sql, timeline_query_for_www(), -1);
  blob_append_sql(&sql, " AND blob.rid IN leaf");
  if( showClosed ){
    blob_append_sql(&sql," AND %z", leaf_is_closed_sql("blob.rid"));
  }else if( !showAll ){
    blob_append_sql(&sql," AND NOT %z", leaf_is_closed_sql("blob.rid"));
  }







  db_prepare(&q, "%s ORDER BY event.mtime DESC", blob_sql_text(&sql));
  blob_reset(&sql);






  www_print_timeline(&q, TIMELINE_LEAFONLY, 0, 0, 0, 0);
  db_finalize(&q);
  @ <br />
  style_footer();
}

#if INTERFACE
/* Flag parameters to compute_uses_file() */

  int mask = CMDFLAG_1ST_TIER | CMDFLAG_2ND_TIER;
  int useHtml = find_option("html","h",0)!=0;

  if( find_option("www","w",0) ){
    mask = CMDFLAG_WEBPAGE;
  }
  if( find_option("everything","e",0) ){
    mask = CMDFLAG_1ST_TIER | CMDFLAG_2ND_TIER | CMDFLAG_WEBPAGE |
              CMDFLAG_SETTING | CMDFLAG_TEST;
  }
  if( find_option("settings","s",0) ){
    mask = CMDFLAG_SETTING;
  }
  if( find_option("test","t",0) ){
    mask |= CMDFLAG_TEST;
  }
................................................................................
      const char *z = aCommand[i].zName;
      const char *zBoldOn  = aCommand[i].eCmdFlags&CMDFLAG_1ST_TIER?"<b>" :"";
      const char *zBoldOff = aCommand[i].eCmdFlags&CMDFLAG_1ST_TIER?"</b>":"";
      if( '/'==*z || strncmp(z,"test",4)==0 ) continue;
      if( (aCommand[i].eCmdFlags & CMDFLAG_SETTING)!=0 ) continue;
      @ <li><a href="%R/help?cmd=%s(z)">%s(zBoldOn)%s(z)%s(zBoldOff)</a></li>
    }
    @ </ul></div>

    @ <a name='webpages'></a>
    @ <h1>Available web UI pages:</h1>
    @ <div class="columns" style="column-width: 18ex;">
    @ <ul>
    for(i=0; i<MX_COMMAND; i++){
      const char *z = aCommand[i].zName;
................................................................................
    if( (aCommand[i].eCmdFlags & cmdMask)==0 ) continue;
    if( zPrefix && memcmp(zPrefix, z, nPrefix)!=0 ) continue;
    aCmd[nCmd++] = aCommand[i].zName;
  }
  multi_column_list(aCmd, nCmd);
}

/*
** Documentation on universal command-line options.
*/
/* @-comment: # */
static const char zOptions[] =
@ Command-line options common to all commands:
@ 
@   --args FILENAME         Read additional arguments and options from FILENAME
@   --cgitrace              Active CGI tracing
@   --comfmtflags VALUE     Set comment formatting flags to VALUE
@   --errorlog FILENAME     Log errors to FILENAME 
@   --help                  Show help on the command rather than running it
@   --httptrace             Trace outbound HTTP requests
@   --localtime             Display times using the local timezone
@   --no-th-hook            Do not run TH1 hooks
@   --quiet                 Reduce the amount of output
@   --sqlstats              Show SQL usage statistics when done
@   --sqltrace              Trace all SQL commands
@   --sshtrace              Trace SSH activity
@   --ssl-identity NAME     Set the SSL identity to NAME
@   --systemtrace           Trace calls to system()
@   --user|-U USER          Make the default user be USER
@   --utc                   Display times using UTC
@   --vfs NAME              Cause SQLite to use the NAME VFS
;

/*
** COMMAND: help
**
** Usage: %fossil help TOPIC
**    or: %fossil TOPIC --help
**
** Display information on how to use TOPIC, which may be a command, webpage, or
** setting.  Webpage names begin with "/".  To display a list of available
** topics, use one of:
**
**    %fossil help                Show common commands
**    %fossil help -a|--all       Show both common and auxiliary commands
**    %fossil help -o|--options   Show command-line options common to all cmds
**    %fossil help -s|--setting   Show setting names
**    %fossil help -t|--test      Show test commands only
**    %fossil help -x|--aux       Show auxiliary commands only
**    %fossil help -w|--www       Show list of webpages
*/
void help_cmd(void){
  int rc;
................................................................................
  const char *zCmdOrPage;
  const char *zCmdOrPagePlural;
  const CmdOrPage *pCmd = 0;
  if( g.argc<3 ){
    z = g.argv[0];
    fossil_print(
      "Usage: %s help TOPIC\n"
      "Common commands:  (use \"%s help help\" for more options)\n",
      z, z);
    command_list(0, CMDFLAG_1ST_TIER);
    version_cmd();
    return;
  }
  if( find_option("options","o",0) ){
    fossil_print("%s", zOptions);
    return;
  }
  if( find_option("all","a",0) ){
    command_list(0, CMDFLAG_1ST_TIER | CMDFLAG_2ND_TIER);
    return;
  }
  else if( find_option("www","w",0) ){
    command_list(0, CMDFLAG_WEBPAGE);
    return;

  int mask = CMDFLAG_1ST_TIER | CMDFLAG_2ND_TIER;
  int useHtml = find_option("html","h",0)!=0;

  if( find_option("www","w",0) ){
    mask = CMDFLAG_WEBPAGE;
  }
  if( find_option("everything","e",0) ){
    mask = CMDFLAG_1ST_TIER | CMDFLAG_2ND_TIER | CMDFLAG_WEBPAGE;

  }
  if( find_option("settings","s",0) ){
    mask = CMDFLAG_SETTING;
  }
  if( find_option("test","t",0) ){
    mask |= CMDFLAG_TEST;
  }
................................................................................
      const char *z = aCommand[i].zName;
      const char *zBoldOn  = aCommand[i].eCmdFlags&CMDFLAG_1ST_TIER?"<b>" :"";
      const char *zBoldOff = aCommand[i].eCmdFlags&CMDFLAG_1ST_TIER?"</b>":"";
      if( '/'==*z || strncmp(z,"test",4)==0 ) continue;
      if( (aCommand[i].eCmdFlags & CMDFLAG_SETTING)!=0 ) continue;
      @ <li><a href="%R/help?cmd=%s(z)">%s(zBoldOn)%s(z)%s(zBoldOff)</a></li>
    }
    @ </ui></div>

    @ <a name='webpages'></a>
    @ <h1>Available web UI pages:</h1>
    @ <div class="columns" style="column-width: 18ex;">
    @ <ul>
    for(i=0; i<MX_COMMAND; i++){
      const char *z = aCommand[i].zName;
................................................................................
    if( (aCommand[i].eCmdFlags & cmdMask)==0 ) continue;
    if( zPrefix && memcmp(zPrefix, z, nPrefix)!=0 ) continue;
    aCmd[nCmd++] = aCommand[i].zName;
  }
  multi_column_list(aCmd, nCmd);
}



























/*
** COMMAND: help
**
** Usage: %fossil help TOPIC
**    or: %fossil TOPIC --help
**
** Display information on how to use TOPIC, which may be a command, webpage, or
** setting.  Webpage names begin with "/".  To display a list of available
** topics, use one of:
**
**    %fossil help                Show common commands
**    %fossil help -a|--all       Show both common and auxiliary commands

**    %fossil help -s|--setting   Show setting names
**    %fossil help -t|--test      Show test commands only
**    %fossil help -x|--aux       Show auxiliary commands only
**    %fossil help -w|--www       Show list of webpages
*/
void help_cmd(void){
  int rc;
................................................................................
  const char *zCmdOrPage;
  const char *zCmdOrPagePlural;
  const CmdOrPage *pCmd = 0;
  if( g.argc<3 ){
    z = g.argv[0];
    fossil_print(
      "Usage: %s help TOPIC\n"
      "Common commands:  (use \"%s help -a|--all\" for a complete list)\n",
      z, z);
    command_list(0, CMDFLAG_1ST_TIER);
    version_cmd();
    return;
  }




  if( find_option("all","a",0) ){
    command_list(0, CMDFLAG_1ST_TIER | CMDFLAG_2ND_TIER);
    return;
  }
  else if( find_option("www","w",0) ){
    command_list(0, CMDFLAG_WEBPAGE);
    return;

**
**       href="$ROOT/
**       action="$ROOT/
**
** Convert $ROOT to the root URI of the repository.  Allow ' in place of "
** and any case for href or action.
*/
void convert_href_and_output(Blob *pIn){
  int i, base;
  int n = blob_size(pIn);
  char *z = blob_buffer(pIn);
  for(base=0, i=7; i<n; i++){
    if( z[i]=='$'
     && strncmp(&z[i],"$ROOT/", 6)==0
     && (z[i-1]=='\'' || z[i-1]=='"')

**
**       href="$ROOT/
**       action="$ROOT/
**
** Convert $ROOT to the root URI of the repository.  Allow ' in place of "
** and any case for href or action.
*/
static void convert_href_and_output(Blob *pIn){
  int i, base;
  int n = blob_size(pIn);
  char *z = blob_buffer(pIn);
  for(base=0, i=7; i<n; i++){
    if( z[i]=='$'
     && strncmp(&z[i],"$ROOT/", 6)==0
     && (z[i-1]=='\'' || z[i-1]=='"')

  tmFlags = timeline_ss_submenu();
  if( tmFlags & TIMELINE_COLUMNAR ){
    zStyle = "Columnar";
  }else if( tmFlags & TIMELINE_COMPACT ){
    zStyle = "Compact";
  }else if( tmFlags & TIMELINE_VERBOSE ){
    zStyle = "Verbose";
  }else if( tmFlags & TIMELINE_CLASSIC ){
    zStyle = "Classic";
  }else{
    zStyle = "Modern";
  }
  url_initialize(&url, "finfo");
  if( brBg ) url_add_parameter(&url, "brbg", 0);
  if( uBg ) url_add_parameter(&url, "ubg", 0);
  baseCheckin = name_to_rid_www("ci");
................................................................................
    if( zBr==0 ) zBr = "trunk";
    if( uBg ){
      zBgClr = hash_color(zUser);
    }else if( brBg || zBgClr==0 || zBgClr[0]==0 ){
      zBgClr = strcmp(zBr,"trunk")==0 ? "" : hash_color(zBr);
    }
    gidx = graph_add_row(pGraph, frid>0 ? frid : fpid+1000000000,
                         nParent, 0, aParent, zBr, zBgClr,
                         zUuid, 0);
    if( strncmp(zDate, zPrevDate, 10) ){
      sqlite3_snprintf(sizeof(zPrevDate), zPrevDate, "%.10s", zDate);
      @ <tr><td>
      @   <div class="divider timelineDate">%s(zPrevDate)</div>
      @ </td><td></td><td></td></tr>
    }
................................................................................
    @ check-in:&nbsp;\
    hyperlink_to_uuid(zCkin);
    if( fShowId ){
      @ (%d(fmid))
    }
    @ user:&nbsp;\
    hyperlink_to_user(zUser, zDate, ",");
    @ branch:&nbsp;%z(href("%R/timeline?t=%T",zBr))%h(zBr)</a>,
    if( tmFlags & (TIMELINE_COMPACT|TIMELINE_VERBOSE) ){
      @ size:&nbsp;%d(szFile))
    }else{
      @ size:&nbsp;%d(szFile)
    }
    if( zUuid && origCheckin==0 ){
      if( nParent==0 ){

  tmFlags = timeline_ss_submenu();
  if( tmFlags & TIMELINE_COLUMNAR ){
    zStyle = "Columnar";
  }else if( tmFlags & TIMELINE_COMPACT ){
    zStyle = "Compact";
  }else if( tmFlags & TIMELINE_VERBOSE ){
    zStyle = "Verbose";


  }else{
    zStyle = "Modern";
  }
  url_initialize(&url, "finfo");
  if( brBg ) url_add_parameter(&url, "brbg", 0);
  if( uBg ) url_add_parameter(&url, "ubg", 0);
  baseCheckin = name_to_rid_www("ci");
................................................................................
    if( zBr==0 ) zBr = "trunk";
    if( uBg ){
      zBgClr = hash_color(zUser);
    }else if( brBg || zBgClr==0 || zBgClr[0]==0 ){
      zBgClr = strcmp(zBr,"trunk")==0 ? "" : hash_color(zBr);
    }
    gidx = graph_add_row(pGraph, frid>0 ? frid : fpid+1000000000,
                         nParent, aParent, zBr, zBgClr,
                         zUuid, 0);
    if( strncmp(zDate, zPrevDate, 10) ){
      sqlite3_snprintf(sizeof(zPrevDate), zPrevDate, "%.10s", zDate);
      @ <tr><td>
      @   <div class="divider timelineDate">%s(zPrevDate)</div>
      @ </td><td></td><td></td></tr>
    }
................................................................................
    @ check-in:&nbsp;\
    hyperlink_to_uuid(zCkin);
    if( fShowId ){
      @ (%d(fmid))
    }
    @ user:&nbsp;\
    hyperlink_to_user(zUser, zDate, ",");
    @ branch:&nbsp;%z(href("%R/timeline?t=%T&n=200",zBr))%h(zBr)</a>,
    if( tmFlags & (TIMELINE_COMPACT|TIMELINE_VERBOSE) ){
      @ size:&nbsp;%d(szFile))
    }else{
      @ size:&nbsp;%d(szFile)
    }
    if( zUuid && origCheckin==0 ){
      if( nParent==0 ){

    @ <i>Deleted</i>
  }
  if( zClass ){
    @ </div>
  }
}

/*
** Generate the buttons in the display that allow a forum supervisor to
** mark a user as trusted.  Only do this if:
**
**   (1)  The poster is an individual, not a special user like "anonymous"
**   (2)  The current user has Forum Supervisor privilege
*/
static void generateTrustControls(Manifest *pPost){
  if( !g.perm.AdminForum ) return;
  if( login_is_special(pPost->zUser) ) return;
  @ <br>
  @ <label><input type="checkbox" name="trust">
  @ Trust user "%h(pPost->zUser)"
  @ so that future posts by "%h(pPost->zUser)" do not require moderation.
  @ </label>
  @ <input type="hidden" name="trustuser" value="%h(pPost->zUser)">
}

/*
** Display all posts in a forum thread in chronological order
*/
static void forum_display_chronological(int froot, int target){
  ForumThread *pThread = forumthread_create(froot, 0);
  ForumEntry *p;
  int notAnon = login_is_individual();
................................................................................
    if( pPost->zThreadTitle ){
      @ <h1>%h(pPost->zThreadTitle)</h1>
    }
    zDate = db_text(0, "SELECT datetime(%.17g)", pPost->rDate);
    @ <p>By %h(pPost->zUser) on %h(zDate) (%d(p->fpid))
    fossil_free(zDate);
    if( p->pEdit ){
      @ edit of %z(href("%R/forumpost/%S?t=c",p->pEdit->zUuid))%d(p->fprev)</a>
    }
    if( p->firt ){
      ForumEntry *pIrt = p->pPrev;
      while( pIrt && pIrt->fpid!=p->firt ) pIrt = pIrt->pPrev;
      if( pIrt ){
        @ reply to %z(href("%R/forumpost/%S?t=c",pIrt->zUuid))%d(p->firt)</a>
      }
    }
    if( p->pLeaf ){
      @ updated by %z(href("%R/forumpost/%S?t=c",p->pLeaf->zUuid))\
      @ %d(p->pLeaf->fpid)</a>
    }
    if( g.perm.Debug ){
      @ <span class="debug">\
      @ <a href="%R/artifact/%h(p->zUuid)">artifact</a></span>
    }
    if( p->fpid!=target ){
      @ %z(href("%R/forumpost/%S?t=c",p->zUuid))[link]</a>
    }
    isPrivate = content_is_private(p->fpid);
    sameUser = notAnon && fossil_strcmp(pPost->zUser, g.zLogin)==0;
    if( isPrivate && !g.perm.ModForum && !sameUser ){
      @ <p><span class="modpending">Awaiting Moderator Approval</span></p>
    }else{
      forum_render(0, pPost->zMimetype, pPost->zWiki, 0);
................................................................................
          @ <input type="submit" name="nullout" value="Delete">
        }
      }else if( g.perm.ModForum ){
        /* Provide moderators with moderation buttons for posts that
        ** are pending moderation */
        @ <input type="submit" name="approve" value="Approve">
        @ <input type="submit" name="reject" value="Reject">
        generateTrustControls(pPost);
      }else if( sameUser ){
        /* A post that is pending moderation can be deleted by the
        ** person who originally submitted the post */
        @ <input type="submit" name="reject" value="Delete">
      }
      @ </form></p>
    }
................................................................................
          @ <input type="submit" name="nullout" value="Delete">
        }
      }else if( g.perm.ModForum ){
        /* Provide moderators with moderation buttons for posts that
        ** are pending moderation */
        @ <input type="submit" name="approve" value="Approve">
        @ <input type="submit" name="reject" value="Reject">
        generateTrustControls(pPost);
      }else if( sameUser ){
        /* A post that is pending moderation can be deleted by the
        ** person who originally submitted the post */
        @ <input type="submit" name="reject" value="Delete">
      }
      @ </form></p>
    }
................................................................................
** it's entire thread.  The selected posting is enclosed within
** <div class='forumSel'>...</div>.  Javascript is used to move the
** selected posting into view after the page loads.
**
** Query parameters:
**
**   name=X        REQUIRED.  The hash of the post to display
**   t=MODE        Display mode. MODE is 'c' for chronological or
**                   'h' for hierarchical, or 'a' for automatic.
*/
void forumpost_page(void){
  forumthread_page();
}

/*
** WEBPAGE: forumthread
................................................................................
** Show all forum messages associated with a particular message thread.
** The result is basically the same as /forumpost except that none of
** the postings in the thread are selected.
**
** Query parameters:
**
**   name=X        REQUIRED.  The hash of any post of the thread.
**   t=MODE        Display mode. MODE is 'c' for chronological or
**                   'h' for hierarchical, or 'a' for automatic.
*/
void forumthread_page(void){
  int fpid;
  int froot;
  const char *zName = P("name");
  const char *zMode = PD("t","a");
  login_check_credentials();
  if( !g.perm.RdForum ){
    login_needed(g.anon.RdForum);
    return;
  }
  if( zName==0 ){
    webpage_error("Missing \"name=\" query parameter");
................................................................................
  }
  style_header("Forum");
  froot = db_int(0, "SELECT froot FROM forumpost WHERE fpid=%d", fpid);
  if( froot==0 ){
    webpage_error("Not a forum post: \"%s\"", zName);
  }
  if( fossil_strcmp(g.zPath,"forumthread")==0 ) fpid = 0;
  if( zMode[0]=='a' ){
    if( cgi_from_mobile() ){
      zMode = "c";  /* Default to chronological on mobile */
    }else{
      zMode = "h";
    }
  }
  if( zMode[0]=='c' ){
    style_submenu_element("Hierarchical", "%R/%s/%s?t=h", g.zPath, zName);
    forum_display_chronological(froot, fpid);
  }else{

    style_submenu_element("Chronological", "%R/%s/%s?t=c", g.zPath, zName);

    forum_display_hierarchical(froot, fpid);
  }
  style_load_js("forum.js");
  style_footer();
}

/*
................................................................................
  }
  if( P("preview") ){
    @ <h1>Preview:</h1>
    forum_render(zTitle, zMimetype, zContent, "forumEdit");
  }
  style_header("New Forum Thread");
  @ <form action="%R/forume1" method="POST">
  @ <h1>New Thread:</h1>
  forum_from_line();
  forum_entry_widget(zTitle, zMimetype, zContent);
  @ <input type="submit" name="preview" value="Preview">
  if( P("preview") ){
    @ <input type="submit" name="submit" value="Submit">
  }else{
    @ <input type="submit" name="submit" value="Submit" disabled>
................................................................................
  if( P("cancel") ){
    cgi_redirectf("%R/forumpost/%S",P("fpid"));
    return;
  }
  isCsrfSafe = cgi_csrf_safe(1);
  if( g.perm.ModForum && isCsrfSafe ){
    if( P("approve") ){
      const char *zUserToTrust;
      moderation_approve(fpid);
      if( g.perm.AdminForum
       && PB("trust")
       && (zUserToTrust = P("trustuser"))!=0
      ){
        db_multi_exec("UPDATE user SET cap=cap||'4' "
                      "WHERE login=%Q AND cap NOT GLOB '*4*'",
                      zUserToTrust);
      }
      cgi_redirectf("%R/forumpost/%S",P("fpid"));
      return;
    }
    if( P("reject") ){
      char *zParent = 
        db_text(0,
          "SELECT uuid FROM forumpost, blob"
................................................................................
  srchFlags = search_restrict(SRCH_FORUM);
  if( !g.perm.RdForum ){
    login_needed(g.anon.RdForum);
    return;
  }
  style_header("Forum");
  if( g.perm.WrForum ){
    style_submenu_element("New Thread","%R/forumnew");
  }else{
    /* Can't combine this with previous case using the ternary operator
     * because that causes an error yelling about "non-constant format"
     * with some compilers.  I can't see it, since both expressions have
     * the same format, but I'm no C spec lawyer. */
    style_submenu_element("New Thread","%R/login");
  }
  if( g.perm.ModForum && moderation_needed() ){
    style_submenu_element("Moderation Requests", "%R/modreq");
  }
  if( (srchFlags & SRCH_FORUM)!=0 ){
    if( search_screen(SRCH_FORUM, 0) ){
      style_submenu_element("Recent Threads","%R/forum");

    @ <i>Deleted</i>
  }
  if( zClass ){
    @ </div>
  }
}



















/*
** Display all posts in a forum thread in chronological order
*/
static void forum_display_chronological(int froot, int target){
  ForumThread *pThread = forumthread_create(froot, 0);
  ForumEntry *p;
  int notAnon = login_is_individual();
................................................................................
    if( pPost->zThreadTitle ){
      @ <h1>%h(pPost->zThreadTitle)</h1>
    }
    zDate = db_text(0, "SELECT datetime(%.17g)", pPost->rDate);
    @ <p>By %h(pPost->zUser) on %h(zDate) (%d(p->fpid))
    fossil_free(zDate);
    if( p->pEdit ){
      @ edit of %z(href("%R/forumpost/%S?t",p->pEdit->zUuid))%d(p->fprev)</a>
    }
    if( p->firt ){
      ForumEntry *pIrt = p->pPrev;
      while( pIrt && pIrt->fpid!=p->firt ) pIrt = pIrt->pPrev;
      if( pIrt ){
        @ reply to %z(href("%R/forumpost/%S?t",pIrt->zUuid))%d(p->firt)</a>
      }
    }
    if( p->pLeaf ){
      @ updated by %z(href("%R/forumpost/%S?t",p->pLeaf->zUuid))\
      @ %d(p->pLeaf->fpid)</a>
    }
    if( g.perm.Debug ){
      @ <span class="debug">\
      @ <a href="%R/artifact/%h(p->zUuid)">artifact</a></span>
    }
    if( p->fpid!=target ){
      @ %z(href("%R/forumpost/%S?t",p->zUuid))[link]</a>
    }
    isPrivate = content_is_private(p->fpid);
    sameUser = notAnon && fossil_strcmp(pPost->zUser, g.zLogin)==0;
    if( isPrivate && !g.perm.ModForum && !sameUser ){
      @ <p><span class="modpending">Awaiting Moderator Approval</span></p>
    }else{
      forum_render(0, pPost->zMimetype, pPost->zWiki, 0);
................................................................................
          @ <input type="submit" name="nullout" value="Delete">
        }
      }else if( g.perm.ModForum ){
        /* Provide moderators with moderation buttons for posts that
        ** are pending moderation */
        @ <input type="submit" name="approve" value="Approve">
        @ <input type="submit" name="reject" value="Reject">

      }else if( sameUser ){
        /* A post that is pending moderation can be deleted by the
        ** person who originally submitted the post */
        @ <input type="submit" name="reject" value="Delete">
      }
      @ </form></p>
    }
................................................................................
          @ <input type="submit" name="nullout" value="Delete">
        }
      }else if( g.perm.ModForum ){
        /* Provide moderators with moderation buttons for posts that
        ** are pending moderation */
        @ <input type="submit" name="approve" value="Approve">
        @ <input type="submit" name="reject" value="Reject">

      }else if( sameUser ){
        /* A post that is pending moderation can be deleted by the
        ** person who originally submitted the post */
        @ <input type="submit" name="reject" value="Delete">
      }
      @ </form></p>
    }
................................................................................
** it's entire thread.  The selected posting is enclosed within
** <div class='forumSel'>...</div>.  Javascript is used to move the
** selected posting into view after the page loads.
**
** Query parameters:
**
**   name=X        REQUIRED.  The hash of the post to display
**   t             Show a chronologic listing instead of hierarchical

*/
void forumpost_page(void){
  forumthread_page();
}

/*
** WEBPAGE: forumthread
................................................................................
** Show all forum messages associated with a particular message thread.
** The result is basically the same as /forumpost except that none of
** the postings in the thread are selected.
**
** Query parameters:
**
**   name=X        REQUIRED.  The hash of any post of the thread.
**   t             Show a chronologic listing instead of hierarchical

*/
void forumthread_page(void){
  int fpid;
  int froot;
  const char *zName = P("name");

  login_check_credentials();
  if( !g.perm.RdForum ){
    login_needed(g.anon.RdForum);
    return;
  }
  if( zName==0 ){
    webpage_error("Missing \"name=\" query parameter");
................................................................................
  }
  style_header("Forum");
  froot = db_int(0, "SELECT froot FROM forumpost WHERE fpid=%d", fpid);
  if( froot==0 ){
    webpage_error("Not a forum post: \"%s\"", zName);
  }
  if( fossil_strcmp(g.zPath,"forumthread")==0 ) fpid = 0;
  if( P("t") ){
    if( g.perm.Debug ){
      style_submenu_element("Hierarchical", "%R/%s/%s", g.zPath, zName);


    }                          



    forum_display_chronological(froot, fpid);
  }else{
    if( g.perm.Debug ){
      style_submenu_element("Chronological", "%R/%s/%s?t", g.zPath, zName);
    }                          
    forum_display_hierarchical(froot, fpid);
  }
  style_load_js("forum.js");
  style_footer();
}

/*
................................................................................
  }
  if( P("preview") ){
    @ <h1>Preview:</h1>
    forum_render(zTitle, zMimetype, zContent, "forumEdit");
  }
  style_header("New Forum Thread");
  @ <form action="%R/forume1" method="POST">
  @ <h1>New Message:</h1>
  forum_from_line();
  forum_entry_widget(zTitle, zMimetype, zContent);
  @ <input type="submit" name="preview" value="Preview">
  if( P("preview") ){
    @ <input type="submit" name="submit" value="Submit">
  }else{
    @ <input type="submit" name="submit" value="Submit" disabled>
................................................................................
  if( P("cancel") ){
    cgi_redirectf("%R/forumpost/%S",P("fpid"));
    return;
  }
  isCsrfSafe = cgi_csrf_safe(1);
  if( g.perm.ModForum && isCsrfSafe ){
    if( P("approve") ){

      moderation_approve(fpid);








      cgi_redirectf("%R/forumpost/%S",P("fpid"));
      return;
    }
    if( P("reject") ){
      char *zParent = 
        db_text(0,
          "SELECT uuid FROM forumpost, blob"
................................................................................
  srchFlags = search_restrict(SRCH_FORUM);
  if( !g.perm.RdForum ){
    login_needed(g.anon.RdForum);
    return;
  }
  style_header("Forum");
  if( g.perm.WrForum ){






    style_submenu_element("New Message","%R/forumnew");
  }
  if( g.perm.ModForum && moderation_needed() ){
    style_submenu_element("Moderation Requests", "%R/modreq");
  }
  if( (srchFlags & SRCH_FORUM)!=0 ){
    if( search_screen(SRCH_FORUM, 0) ){
      style_submenu_element("Recent Threads","%R/forum");

**
** The nParent field is -1 for entires that do not participate in the graph
** but which are included just so that we can capture their background color.
*/
struct GraphRow {
  int rid;                    /* The rid for the check-in */
  i8 nParent;                 /* Number of parents.  -1 for technote lines */
  i8 nCherrypick;             /* Subset of aParent that are cherrypicks */
  i8 nNonCherrypick;          /* Number of non-cherrypick parents */
  int *aParent;               /* Array of parents.  0 element is primary .*/
  char *zBranch;              /* Branch name */
  char *zBgClr;               /* Background Color */
  char zUuid[HNAME_MAX+1];    /* Check-in for file ID */

  GraphRow *pNext;            /* Next row down in the list of all rows */
  GraphRow *pPrev;            /* Previous row */

  int idx;                    /* Row index.  First is 1.  0 used for "none" */
  int idxTop;                 /* Direct descendent highest up on the graph */
  GraphRow *pChild;           /* Child immediately above this node */
  u8 isDup;                   /* True if this is duplicate of a prior entry */
  u8 isLeaf;                  /* True if this is a leaf node */
  u8 hasNormalOutMerge;       /* Is parent of at laest 1 non-cherrypick merge */
  u8 timeWarp;                /* Child is earlier in time */
  u8 bDescender;              /* True if riser from bottom of graph to here. */
  i8 iRail;                   /* Which rail this check-in appears on. 0-based.*/
  i8 mergeOut;                /* Merge out to this rail.  -1 if no merge-out */
  u8 mergeIn[GR_MAX_RAIL];    /* Merge in from non-zero rails */
  int aiRiser[GR_MAX_RAIL];   /* Risers from this node to a higher row. */
  int mergeUpto;              /* Draw the mergeOut rail up to this level */
  int cherrypickUpto;         /* Continue the mergeOut rail up to here */
  u64 mergeDown;              /* Draw merge lines up from bottom of graph */
  u64 cherrypickDown;         /* Draw cherrypick lines up from bottom */

  u64 railInUse;              /* Mask of occupied rails at this row */
};

/* Context while building a graph
*/
struct GraphContext {
................................................................................
/*
** Add a new row to the graph context.  Rows are added from top to bottom.
*/
int graph_add_row(
  GraphContext *p,     /* The context to which the row is added */
  int rid,             /* RID for the check-in */
  int nParent,         /* Number of parents */
  int nCherrypick,     /* How many of aParent[] are actually cherrypicks */
  int *aParent,        /* Array of parents */
  const char *zBranch, /* Branch for this check-in */
  const char *zBgClr,  /* Background color. NULL or "" for white. */
  const char *zUuid,   /* hash name of the object being graphed */
  int isLeaf           /* True if this row is a leaf */
){
  GraphRow *pRow;
................................................................................

  if( p->nErr ) return 0;
  nByte = sizeof(GraphRow);
  if( nParent>0 ) nByte += sizeof(pRow->aParent[0])*nParent;
  pRow = (GraphRow*)safeMalloc( nByte );
  pRow->aParent = nParent>0 ? (int*)&pRow[1] : 0;
  pRow->rid = rid;
  if( nCherrypick>=nParent ){
    nCherrypick = nParent-1; /* Safety. Should never happen. */
  }
  pRow->nParent = nParent;
  pRow->nCherrypick = nCherrypick;
  pRow->nNonCherrypick = nParent - nCherrypick;
  pRow->zBranch = persistBranchName(p, zBranch);
  if( zUuid==0 ) zUuid = "";
  sqlite3_snprintf(sizeof(pRow->zUuid), pRow->zUuid, "%s", zUuid);
  pRow->isLeaf = isLeaf;
  memset(pRow->aiRiser, -1, sizeof(pRow->aiRiser));
  if( zBgClr==0 ) zBgClr = "";
  pRow->zBgClr = persistBranchName(p, zBgClr);
................................................................................

/*
** Create a merge-arrow riser going from pParent up to pChild.
*/
static void createMergeRiser(
  GraphContext *p,
  GraphRow *pParent,
  GraphRow *pChild,
  int isCherrypick
){
  int u;
  u64 mask;
  GraphRow *pLoop;

  if( pParent->mergeOut<0 ){
    u = pParent->aiRiser[pParent->iRail];
    if( u>=0 && u<pChild->idx ){
      /* The thick arrow up to the next primary child of pDesc goes
      ** further up than the thin merge arrow riser, so draw them both
      ** on the same rail. */
      pParent->mergeOut = pParent->iRail;

     }else{
      /* The thin merge arrow riser is taller than the thick primary
      ** child riser, so use separate rails. */
      int iTarget = pParent->iRail;
      pParent->mergeOut = findFreeRail(p, pChild->idx, pParent->idx-1, iTarget);

      mask = BIT(pParent->mergeOut);
      for(pLoop=pChild->pNext; pLoop && pLoop->rid!=pParent->rid;
           pLoop=pLoop->pNext){
        pLoop->railInUse |= mask;
      }
    }
  }
  if( isCherrypick ){
    if( pParent->cherrypickUpto==0 || pParent->cherrypickUpto > pChild->idx ){
      pParent->cherrypickUpto = pChild->idx;
    }
  }else{
    pParent->hasNormalOutMerge = 1;
    if( pParent->mergeUpto==0 || pParent->mergeUpto > pChild->idx ){
      pParent->mergeUpto = pChild->idx;
    }
  }
  pChild->mergeIn[pParent->mergeOut] = isCherrypick ? 2 : 1;
}

/*
** Compute the maximum rail number.
*/
static void find_max_rail(GraphContext *p){
  GraphRow *pRow;
  p->mxRail = 0;
  for(pRow=p->pFirst; pRow; pRow=pRow->pNext){
    if( pRow->iRail>p->mxRail ) p->mxRail = pRow->iRail;
    if( pRow->mergeOut>p->mxRail ) p->mxRail = pRow->mergeOut;
    while( p->mxRail<GR_MAX_RAIL
        && (pRow->mergeDown|pRow->cherrypickDown)>(BIT(p->mxRail+1)-1)
    ){
      p->mxRail++;
    }
  }
}

/*
** Draw a riser from pRow to the top of the graph
................................................................................
  ** of this graph, then no arrows will be drawn for it, so remove it from
  ** the aParent[] array.
  */
  if( omitDescenders ){
    for(pRow=p->pFirst; pRow; pRow=pRow->pNext){
      for(i=1; i<pRow->nParent; i++){
        if( hashFind(p, pRow->aParent[i])==0 ){
          memmove(pRow->aParent+i, pRow->aParent+i+1, 
                  sizeof(pRow->aParent[0])*(pRow->nParent-i-1));
          pRow->nParent--;
          if( i<pRow->nNonCherrypick ){
            pRow->nNonCherrypick--;
          }else{
            pRow->nCherrypick--;
          }
          i--;
        }
      }
    }
  }

  /* If the primary parent is in a different branch, but there are
  ** other parents in the same branch, reorder the parents to make
  ** the parent from the same branch the primary parent.
  */
  for(pRow=p->pFirst; pRow; pRow=pRow->pNext){
    if( pRow->isDup ) continue;
    if( pRow->nNonCherrypick<2 ) continue;      /* Not a fork */
    pParent = hashFind(p, pRow->aParent[0]);
    if( pParent==0 ) continue;                         /* Parent off-screen */
    if( pParent->zBranch==pRow->zBranch ) continue;    /* Same branch */
    for(i=1; i<pRow->nNonCherrypick; i++){
      pParent = hashFind(p, pRow->aParent[i]);
      if( pParent && pParent->zBranch==pRow->zBranch ){
        int t = pRow->aParent[0];
        pRow->aParent[0] = pRow->aParent[i];
        pRow->aParent[i] = t;
        break;
      }
................................................................................
        }
        if( iMrail==-1 ){
          iMrail = findFreeRail(p, pRow->idx, p->nRow, 0);
          if( p->mxRail>=GR_MAX_RAIL ) return;
          mergeRiserFrom[iMrail] = parentRid;
        }
        mask = BIT(iMrail);
        if( i>=pRow->nNonCherrypick ){
          pRow->mergeIn[iMrail] = 2;
          pRow->cherrypickDown |= mask;
        }else{
          pRow->mergeIn[iMrail] = 1;
          pRow->mergeDown |= mask;
        }
        for(pLoop=pRow->pNext; pLoop; pLoop=pLoop->pNext){
          pLoop->railInUse |= mask;
        }
      }else{
        /* Merge from an on-screen node */
        createMergeRiser(p, pDesc, pRow, i>=pRow->nNonCherrypick);
        if( p->mxRail>=GR_MAX_RAIL ) return;
      }
    }
  }

  /*
  ** Insert merge rails from primaries to duplicates.
................................................................................
    dupRail = mxRail+1;
    if( p->mxRail>=GR_MAX_RAIL ) return;
    for(pRow=p->pFirst; pRow; pRow=pRow->pNext){
      if( !pRow->isDup ) continue;
      pRow->iRail = dupRail;
      pDesc = hashFind(p, pRow->rid);
      assert( pDesc!=0 && pDesc!=pRow );
      createMergeRiser(p, pDesc, pRow, 0);
      if( pDesc->mergeOut>mxRail ) mxRail = pDesc->mergeOut;
    }
    if( dupRail<=mxRail ){
      dupRail = mxRail+1;
      for(pRow=p->pFirst; pRow; pRow=pRow->pNext){
        if( pRow->isDup ) pRow->iRail = dupRail;
      }

**
** The nParent field is -1 for entires that do not participate in the graph
** but which are included just so that we can capture their background color.
*/
struct GraphRow {
  int rid;                    /* The rid for the check-in */
  i8 nParent;                 /* Number of parents.  -1 for technote lines */


  int *aParent;               /* Array of parents.  0 element is primary .*/
  char *zBranch;              /* Branch name */
  char *zBgClr;               /* Background Color */
  char zUuid[HNAME_MAX+1];    /* Check-in for file ID */

  GraphRow *pNext;            /* Next row down in the list of all rows */
  GraphRow *pPrev;            /* Previous row */

  int idx;                    /* Row index.  First is 1.  0 used for "none" */
  int idxTop;                 /* Direct descendent highest up on the graph */
  GraphRow *pChild;           /* Child immediately above this node */
  u8 isDup;                   /* True if this is duplicate of a prior entry */
  u8 isLeaf;                  /* True if this is a leaf node */

  u8 timeWarp;                /* Child is earlier in time */
  u8 bDescender;              /* True if riser from bottom of graph to here. */
  i8 iRail;                   /* Which rail this check-in appears on. 0-based.*/
  i8 mergeOut;                /* Merge out to this rail.  -1 if no merge-out */
  u8 mergeIn[GR_MAX_RAIL];    /* Merge in from non-zero rails */
  int aiRiser[GR_MAX_RAIL];   /* Risers from this node to a higher row. */
  int mergeUpto;              /* Draw the mergeOut rail up to this level */

  u64 mergeDown;              /* Draw merge lines up from bottom of graph */


  u64 railInUse;              /* Mask of occupied rails at this row */
};

/* Context while building a graph
*/
struct GraphContext {
................................................................................
/*
** Add a new row to the graph context.  Rows are added from top to bottom.
*/
int graph_add_row(
  GraphContext *p,     /* The context to which the row is added */
  int rid,             /* RID for the check-in */
  int nParent,         /* Number of parents */

  int *aParent,        /* Array of parents */
  const char *zBranch, /* Branch for this check-in */
  const char *zBgClr,  /* Background color. NULL or "" for white. */
  const char *zUuid,   /* hash name of the object being graphed */
  int isLeaf           /* True if this row is a leaf */
){
  GraphRow *pRow;
................................................................................

  if( p->nErr ) return 0;
  nByte = sizeof(GraphRow);
  if( nParent>0 ) nByte += sizeof(pRow->aParent[0])*nParent;
  pRow = (GraphRow*)safeMalloc( nByte );
  pRow->aParent = nParent>0 ? (int*)&pRow[1] : 0;
  pRow->rid = rid;



  pRow->nParent = nParent;


  pRow->zBranch = persistBranchName(p, zBranch);
  if( zUuid==0 ) zUuid = "";
  sqlite3_snprintf(sizeof(pRow->zUuid), pRow->zUuid, "%s", zUuid);
  pRow->isLeaf = isLeaf;
  memset(pRow->aiRiser, -1, sizeof(pRow->aiRiser));
  if( zBgClr==0 ) zBgClr = "";
  pRow->zBgClr = persistBranchName(p, zBgClr);
................................................................................

/*
** Create a merge-arrow riser going from pParent up to pChild.
*/
static void createMergeRiser(
  GraphContext *p,
  GraphRow *pParent,
  GraphRow *pChild

){
  int u;
  u64 mask;
  GraphRow *pLoop;

  if( pParent->mergeOut<0 ){
    u = pParent->aiRiser[pParent->iRail];
    if( u>=0 && u<pChild->idx ){
      /* The thick arrow up to the next primary child of pDesc goes
      ** further up than the thin merge arrow riser, so draw them both
      ** on the same rail. */
      pParent->mergeOut = pParent->iRail;
      pParent->mergeUpto = pChild->idx;
    }else{
      /* The thin merge arrow riser is taller than the thick primary
      ** child riser, so use separate rails. */
      int iTarget = pParent->iRail;
      pParent->mergeOut = findFreeRail(p, pChild->idx, pParent->idx-1, iTarget);
      pParent->mergeUpto = pChild->idx;
      mask = BIT(pParent->mergeOut);
      for(pLoop=pChild->pNext; pLoop && pLoop->rid!=pParent->rid;
           pLoop=pLoop->pNext){
        pLoop->railInUse |= mask;
      }
    }
  }










  pChild->mergeIn[pParent->mergeOut] = 1;
}

/*
** Compute the maximum rail number.
*/
static void find_max_rail(GraphContext *p){
  GraphRow *pRow;
  p->mxRail = 0;
  for(pRow=p->pFirst; pRow; pRow=pRow->pNext){
    if( pRow->iRail>p->mxRail ) p->mxRail = pRow->iRail;
    if( pRow->mergeOut>p->mxRail ) p->mxRail = pRow->mergeOut;
    while( p->mxRail<GR_MAX_RAIL && pRow->mergeDown>(BIT(p->mxRail+1)-1) ){


      p->mxRail++;
    }
  }
}

/*
** Draw a riser from pRow to the top of the graph
................................................................................
  ** of this graph, then no arrows will be drawn for it, so remove it from
  ** the aParent[] array.
  */
  if( omitDescenders ){
    for(pRow=p->pFirst; pRow; pRow=pRow->pNext){
      for(i=1; i<pRow->nParent; i++){
        if( hashFind(p, pRow->aParent[i])==0 ){


          pRow->aParent[i] = pRow->aParent[--pRow->nParent];





          i--;
        }
      }
    }
  }

  /* If the primary parent is in a different branch, but there are
  ** other parents in the same branch, reorder the parents to make
  ** the parent from the same branch the primary parent.
  */
  for(pRow=p->pFirst; pRow; pRow=pRow->pNext){
    if( pRow->isDup ) continue;
    if( pRow->nParent<2 ) continue;                    /* Not a fork */
    pParent = hashFind(p, pRow->aParent[0]);
    if( pParent==0 ) continue;                         /* Parent off-screen */
    if( pParent->zBranch==pRow->zBranch ) continue;    /* Same branch */
    for(i=1; i<pRow->nParent; i++){
      pParent = hashFind(p, pRow->aParent[i]);
      if( pParent && pParent->zBranch==pRow->zBranch ){
        int t = pRow->aParent[0];
        pRow->aParent[0] = pRow->aParent[i];
        pRow->aParent[i] = t;
        break;
      }
................................................................................
        }
        if( iMrail==-1 ){
          iMrail = findFreeRail(p, pRow->idx, p->nRow, 0);
          if( p->mxRail>=GR_MAX_RAIL ) return;
          mergeRiserFrom[iMrail] = parentRid;
        }
        mask = BIT(iMrail);




        pRow->mergeIn[iMrail] = 1;
        pRow->mergeDown |= mask;

        for(pLoop=pRow->pNext; pLoop; pLoop=pLoop->pNext){
          pLoop->railInUse |= mask;
        }
      }else{
        /* Merge from an on-screen node */
        createMergeRiser(p, pDesc, pRow);
        if( p->mxRail>=GR_MAX_RAIL ) return;
      }
    }
  }

  /*
  ** Insert merge rails from primaries to duplicates.
................................................................................
    dupRail = mxRail+1;
    if( p->mxRail>=GR_MAX_RAIL ) return;
    for(pRow=p->pFirst; pRow; pRow=pRow->pNext){
      if( !pRow->isDup ) continue;
      pRow->iRail = dupRail;
      pDesc = hashFind(p, pRow->rid);
      assert( pDesc!=0 && pDesc!=pRow );
      createMergeRiser(p, pDesc, pRow);
      if( pDesc->mergeOut>mxRail ) mxRail = pDesc->mergeOut;
    }
    if( dupRail<=mxRail ){
      dupRail = mxRail+1;
      for(pRow=p->pFirst; pRow; pRow=pRow->pNext){
        if( pRow->isDup ) pRow->iRail = dupRail;
      }

**     "rowinfo": ROWINFO-ARRAY }
**
** The rowinfo field is an array of structures, one per entry in the timeline,
** where each structure has the following fields:
**
**   id:  The id of the <div> element for the row. This is an integer.
**        to get an actual id, prepend "m" to the integer.  The top node
**        is iTopRow and numbers increase moving down the timeline.
**   bg:  The background color for this row
**    r:  The "rail" that the node for this row sits on.  The left-most
**        rail is 0 and the number increases to the right.
**    d:  If exists and true then there is a "descender" - an arrow
**        coming from the bottom of the page straight up to this node.
**   mo:  "merge-out".  If it exists, this is the rail position
**        for the upward portion of a merge arrow.  The merge arrow goes as
**        a solid normal merge line up to the row identified by "mu" and
**        then as a dashed cherrypick merge line up further to "cu".
**        If this value is omitted if there are no merge children.
**   mu:  The id of the row which is the top of the merge-out arrow.
**        Only exists if "mo" exists.
**   cu:  Extend the mu merge arrow up to this row as a cherrypick
**        merge line, if this value exists.
**    u:  Draw a thick child-line out of the top of this node and up to
**        the node with an id equal to this value.  0 if it is straight to
**        the top of the page, -1 if there is no thick-line riser.
**    f:  0x01: a leaf node.
**   au:  An array of integers that define thick-line risers for branches.
**        The integers are in pairs.  For each pair, the first integer is
**        is the rail on which the riser should run and the second integer
**        is the id of the node upto which the riser should run. If there
**        are no risers, this array does not exist.
**   mi:  "merge-in".  An array of integer rail positions from which
**        merge arrows should be drawn into this node.  If the value is
**        negative, then the rail position is the absolute value of mi[]
**        and a thin merge-arrow descender is drawn to the bottom of
**        the screen. This array is omitted if there are no inbound
**        merges.
**   ci:  "cherrypick-in". Like "mi" except for cherrypick merges.
**        omitted if there are no cherrypick merges.
**    h:  The artifact hash of the object being graphed
*/
var amendCssOnce = 1; // Only change the CSS one time
function amendCss(circleNodes,showArrowheads){
  if( !amendCssOnce ) return;
  var css = "";
  if( circleNodes ){
................................................................................
    canvasDiv.className = "tl-canvas";
    canvasDiv.style.position = "absolute";
    parent.appendChild(canvasDiv);
  
    var elems = {};
    var elemClasses = [
      "rail", "mergeoffset", "node", "arrow u", "arrow u sm", "line",
      "arrow merge r", "line merge", "arrow warp", "line warp",
      "line cherrypick"
    ];
    for( var i=0; i<elemClasses.length; i++ ){
      var cls = elemClasses[i];
      var elem = document.createElement("div");
      elem.className = "tl-" + cls;
      if( cls.indexOf("line")==0 ) elem.className += " v";
      canvasDiv.appendChild(elem);
................................................................................
    }
    node = elems.node;
    arrow = elems.arrow_u;
    arrowSmall = elems.arrow_u_sm;
    line = elems.line;
    mArrow = elems.arrow_merge_r;
    mLine = elems.line_merge;
    cpLine = elems.line_cherrypick;
    wArrow = elems.arrow_warp;
    wLine = elems.line_warp;
  
    var minRailPitch = Math.ceil((node.w+line.w)/2 + mArrow.w + 1);
    if( window.innerWidth<400 ){
      railPitch = minRailPitch;
    }else{
................................................................................
    var y0 = from.y + node.h/2;
    var y1 = Math.ceil(to.y + node.h + arw.h/2);
    drawLine(line,color,x,y0,null,y1);
    x = to.x + (node.w-arw.w)/2;
    var n = drawBox(arw.cls,null,x,y);
    if(color) n.style.borderBottomColor = color;
  }
  /* Draw thin horizontal or vertical lines representing merges */
  function drawMergeLine(x0,y0,x1,y1){
    drawLine(mLine,null,x0,y0,x1,y1);
  }
  function drawCherrypickLine(x0,y0,x1,y1){
    drawLine(cpLine,null,x0,y0,x1,y1);
  }
  /* Draw an arrow representing an in-bound merge from the "rail"-th rail
  ** over to the node of "p".  Make is a checkpoint merge is "isCP" is true */
  function drawMergeArrow(p,rail,isCP){
    var x0 = rail*railPitch + node.w/2;
    if( rail in mergeLines ){
      x0 += mergeLines[rail];
      if( p.r<rail ) x0 += mLine.w;
    }else{
      x0 += (p.r<rail ? -1 : 1)*line.w/2;
    }
    var x1 = mArrow.w ? mArrow.w/2 : -node.w/2;
    x1 = p.x + (p.r<rail ? node.w + Math.ceil(x1) : -x1);
    var y = miLineY(p);
    var x = p.x + (p.r<rail ? node.w : -mArrow.w);
    var cls;
    if( isCP ){
      drawCherrypickLine(x0,y,x1,null);
      cls = "arrow cherrypick " + (p.r<rail ? "l" : "r");
    }else{
      drawMergeLine(x0,y,x1,null);

      cls = "arrow merge " + (p.r<rail ? "l" : "r");
    }
    drawBox(cls,null,x,y+(mLine.w-mArrow.h)/2);
  }
  function drawNode(p, btm){
    if( p.bg ){
      var e = document.getElementById("mc"+p.id);
      if(e) e.style.backgroundColor = p.bg;
      e = document.getElementById("md"+p.id);
      if(e) e.style.backgroundColor = p.bg;
    }
    if( p.r<0 ) return;
    if( p.u>0 ) drawUpArrow(p,tx.rowinfo[p.u-tx.iTopRow],p.fg);
    var cls = node.cls;
    if( p.hasOwnProperty('mi') && p.mi.length ) cls += " merge";
    if( p.f&1 ) cls += " leaf";
    var n = drawBox(cls,p.bg,p.x,p.y);
    n.id = "tln"+p.id;
    n.onclick = clickOnNode;
    n.style.zIndex = 10;
    if( !tx.omitDescenders ){
      if( p.u==0 ) drawUpArrow(p,{x: p.x, y: -node.h},p.fg);
      if( p.hasOwnProperty('d') ) drawUpArrow({x: p.x, y: btm-node.h/2},p,p.fg);
    }
    if( p.hasOwnProperty('mo') ){
      var x0 = p.x + node.w/2;
      var x1 = p.mo*railPitch + node.w/2;
      var u = tx.rowinfo[p.mu-tx.iTopRow];
      var y1 = miLineY(u);
      if( p.u<0 || p.mo!=p.r ){
        x1 += mergeLines[p.mo] = -mLine.w/2;
        var y0 = p.y+2;
        if( p.mu==p.id ){
          drawCherrypickLine(x0,y0,x1+(x0<x1 ? mLine.w : 0),null);
          y1 = y0;
        }else{
          drawMergeLine(x0,y0,x1+(x0<x1 ? mLine.w : 0),null);
          drawMergeLine(x1,y0+mLine.w,null,y1);
        }
        if( p.hasOwnProperty('cu') ){
          var u2 = tx.rowinfo[p.cu-tx.iTopRow];
          var y2 = miLineY(u2);
          drawCherrypickLine(x1,y1,null,y2);
        }
      }else if( mergeOffset ){
        mergeLines[p.mo] = u.r<p.r ? -mergeOffset-mLine.w : mergeOffset;
        x1 += mergeLines[p.mo];
        if( p.mo<p.id ){
          drawMergeLine(x1,p.y+node.h/2,null,y1);
        }
        if( p.hasOwnProperty('cu') ){
          var u2 = tx.rowinfo[p.cu-tx.iTopRow];
          var y2 = miLineY(u2);
          drawCherrypickLine(x1,y1,null,y2);
        }
      }else{
        delete mergeLines[p.mo];
      }
    }
    if( p.hasOwnProperty('au') ){
      for( var i=0; i<p.au.length; i+=2 ){
        var rail = p.au[i];
        var x0 = p.x + node.w/2;
        var x1 = rail*railPitch + (node.w-line.w)/2;
        if( x0<x1 ){
          x0 = Math.ceil(x0);
          x1 += line.w;
        }
        var y0 = p.y + (node.h-line.w)/2;
        var u = tx.rowinfo[p.au[i+1]-tx.iTopRow];
        if( u.id<p.id ){
          drawLine(line,u.fg,x0,y0,x1,null);
          drawUpArrow(p,u,u.fg);
        }else{
          var y1 = u.y + (node.h-line.w)/2;
          drawLine(wLine,u.fg,x0,y0,x1,null);
          drawLine(wLine,u.fg,x1-line.w,y0,null,y1+line.w);
          drawLine(wLine,u.fg,x1,y1,u.x-wArrow.w/2,null);
          var x = u.x-wArrow.w;
          var y = u.y+(node.h-wArrow.h)/2;
          var n = drawBox(wArrow.cls,null,x,y);
          if( u.fg ) n.style.borderLeftColor = u.fg;
        }
      }
    }
    if( p.hasOwnProperty('mi') ){
      for( var i=0; i<p.mi.length; i++ ){
        var rail = p.mi[i];
        if( rail<0 ){
          rail = -rail;
          mergeLines[rail] = -mLine.w/2;
          var x = rail*railPitch + (node.w-mLine.w)/2;
          var y = miLineY(p);
          drawMergeLine(x,y,null,mergeBtm[rail]);
          mergeBtm[rail] = y;
        }
        drawMergeArrow(p,rail,0);
      }
    }
    if( p.hasOwnProperty('ci') ){
      for( var i=0; i<p.ci.length; i++ ){
        var rail = p.ci[i];
        if( rail<0 ){
          rail = -rail;
          mergeLines[rail] = -mLine.w/2;
          var x = rail*railPitch + (node.w-mLine.w)/2;
          var y = miLineY(p);
          drawCherrypickLine(x,y,null,mergeBtm[rail]);
          mergeBtm[rail] = y;
        }
        drawMergeArrow(p,rail,1);
      }
    }
  }
  var mergeLines;
  var mergeBtm = new Array;
  function renderGraph(){
    mergeLines = {};
    canvasDiv.innerHTML = "";
    var canvasY = absoluteY(canvasDiv);
    for(var i=0; i<tx.rowinfo.length; i++ ){
      var e = document.getElementById("m"+tx.rowinfo[i].id);
      tx.rowinfo[i].y = absoluteY(e) - canvasY;
................................................................................
      tx.rowinfo[i].x = tx.rowinfo[i].r*railPitch;
    }
    var tlBtm = document.querySelector(".timelineBottom");
    if( tlBtm.offsetHeight<node.h ){
      tlBtm.style.height = node.h + "px";
    }
    var btm = absoluteY(tlBtm) - canvasY + tlBtm.offsetHeight;
    for( var i=0; i<tx.nrail; i++) mergeBtm[i] = btm;
    for( var i=tx.rowinfo.length-1; i>=0; i-- ){
      drawNode(tx.rowinfo[i], btm);
    }
  }
  var selRow;
  function clickOnNode(){
    var p = tx.rowinfo[parseInt(this.id.match(/\d+$/)[0], 10)-tx.iTopRow];

**     "rowinfo": ROWINFO-ARRAY }
**
** The rowinfo field is an array of structures, one per entry in the timeline,
** where each structure has the following fields:
**
**   id:  The id of the <div> element for the row. This is an integer.
**        to get an actual id, prepend "m" to the integer.  The top node
**        is iTopRow and numbers increase moving down the tx.
**   bg:  The background color for this row
**    r:  The "rail" that the node for this row sits on.  The left-most
**        rail is 0 and the number increases to the right.
**    d:  True if there is a "descender" - an arrow coming from the bottom
**        of the page straight up to this node.
**   mo:  "merge-out".  If non-negative, this is the rail position
**        for the upward portion of a merge arrow.  The merge arrow goes up
**        to the row identified by mu:.  If this value is negative then
**        node has no merge children and no merge-out line is drawn.

**   mu:  The id of the row which is the top of the merge-out arrow.



**    u:  Draw a thick child-line out of the top of this node and up to
**        the node with an id equal to this value.  0 if it is straight to
**        the top of the page, -1 if there is no thick-line riser.
**    f:  0x01: a leaf node.
**   au:  An array of integers that define thick-line risers for branches.
**        The integers are in pairs.  For each pair, the first integer is
**        is the rail on which the riser should run and the second integer
**        is the id of the node upto which the riser should run.

**   mi:  "merge-in".  An array of integer rail positions from which
**        merge arrows should be drawn into this node.  If the value is
**        negative, then the rail position is the absolute value of mi[]
**        and a thin merge-arrow descender is drawn to the bottom of

**        the screen.


**    h:  The artifact hash of the object being graphed
*/
var amendCssOnce = 1; // Only change the CSS one time
function amendCss(circleNodes,showArrowheads){
  if( !amendCssOnce ) return;
  var css = "";
  if( circleNodes ){
................................................................................
    canvasDiv.className = "tl-canvas";
    canvasDiv.style.position = "absolute";
    parent.appendChild(canvasDiv);
  
    var elems = {};
    var elemClasses = [
      "rail", "mergeoffset", "node", "arrow u", "arrow u sm", "line",
      "arrow merge r", "line merge", "arrow warp", "line warp"

    ];
    for( var i=0; i<elemClasses.length; i++ ){
      var cls = elemClasses[i];
      var elem = document.createElement("div");
      elem.className = "tl-" + cls;
      if( cls.indexOf("line")==0 ) elem.className += " v";
      canvasDiv.appendChild(elem);
................................................................................
    }
    node = elems.node;
    arrow = elems.arrow_u;
    arrowSmall = elems.arrow_u_sm;
    line = elems.line;
    mArrow = elems.arrow_merge_r;
    mLine = elems.line_merge;

    wArrow = elems.arrow_warp;
    wLine = elems.line_warp;
  
    var minRailPitch = Math.ceil((node.w+line.w)/2 + mArrow.w + 1);
    if( window.innerWidth<400 ){
      railPitch = minRailPitch;
    }else{
................................................................................
    var y0 = from.y + node.h/2;
    var y1 = Math.ceil(to.y + node.h + arw.h/2);
    drawLine(line,color,x,y0,null,y1);
    x = to.x + (node.w-arw.w)/2;
    var n = drawBox(arw.cls,null,x,y);
    if(color) n.style.borderBottomColor = color;
  }

  function drawMergeLine(x0,y0,x1,y1){
    drawLine(mLine,null,x0,y0,x1,y1);
  }





  function drawMergeArrow(p,rail){
    var x0 = rail*railPitch + node.w/2;
    if( rail in mergeLines ){
      x0 += mergeLines[rail];
      if( p.r<rail ) x0 += mLine.w;
    }else{
      x0 += (p.r<rail ? -1 : 1)*line.w/2;
    }
    var x1 = mArrow.w ? mArrow.w/2 : -node.w/2;
    x1 = p.x + (p.r<rail ? node.w + Math.ceil(x1) : -x1);
    var y = miLineY(p);






    drawMergeLine(x0,y,x1,null);
    var x = p.x + (p.r<rail ? node.w : -mArrow.w);
    var cls = "arrow merge " + (p.r<rail ? "l" : "r");

    drawBox(cls,null,x,y+(mLine.w-mArrow.h)/2);
  }
  function drawNode(p, btm){
    if( p.bg ){
      var e = document.getElementById("mc"+p.id);
      if(e) e.style.backgroundColor = p.bg;
      e = document.getElementById("md"+p.id);
      if(e) e.style.backgroundColor = p.bg;
    }
    if( p.r<0 ) return;
    if( p.u>0 ) drawUpArrow(p,tx.rowinfo[p.u-tx.iTopRow],p.fg);
    var cls = node.cls;
    if( p.mi.length ) cls += " merge";
    if( p.f&1 ) cls += " leaf";
    var n = drawBox(cls,p.bg,p.x,p.y);
    n.id = "tln"+p.id;
    n.onclick = clickOnNode;
    n.style.zIndex = 10;
    if( !tx.omitDescenders ){
      if( p.u==0 ) drawUpArrow(p,{x: p.x, y: -node.h},p.fg);
      if( p.d ) drawUpArrow({x: p.x, y: btm-node.h/2},p,p.fg);
    }
    if( p.mo>=0 ){
      var x0 = p.x + node.w/2;
      var x1 = p.mo*railPitch + node.w/2;
      var u = tx.rowinfo[p.mu-tx.iTopRow];
      var y1 = miLineY(u);
      if( p.u<0 || p.mo!=p.r ){
        x1 += mergeLines[p.mo] = -mLine.w/2;
        var y0 = p.y+2;




        if( p.r!=p.mo ) drawMergeLine(x0,y0,x1+(x0<x1 ? mLine.w : 0),null);
        drawMergeLine(x1,y0+mLine.w,null,y1);






      }else if( mergeOffset ){
        mergeLines[p.mo] = u.r<p.r ? -mergeOffset-mLine.w : mergeOffset;
        x1 += mergeLines[p.mo];

        drawMergeLine(x1,p.y+node.h/2,null,y1);






      }else{
        delete mergeLines[p.mo];
      }
    }

    for( var i=0; i<p.au.length; i+=2 ){
      var rail = p.au[i];
      var x0 = p.x + node.w/2;
      var x1 = rail*railPitch + (node.w-line.w)/2;
      if( x0<x1 ){
        x0 = Math.ceil(x0);
        x1 += line.w;
      }
      var y0 = p.y + (node.h-line.w)/2;
      var u = tx.rowinfo[p.au[i+1]-tx.iTopRow];
      if( u.id<p.id ){
        drawLine(line,u.fg,x0,y0,x1,null);
        drawUpArrow(p,u,u.fg);
      }else{
        var y1 = u.y + (node.h-line.w)/2;
        drawLine(wLine,u.fg,x0,y0,x1,null);
        drawLine(wLine,u.fg,x1-line.w,y0,null,y1+line.w);
        drawLine(wLine,u.fg,x1,y1,u.x-wArrow.w/2,null);
        var x = u.x-wArrow.w;
        var y = u.y+(node.h-wArrow.h)/2;
        var n = drawBox(wArrow.cls,null,x,y);
        if( u.fg ) n.style.borderLeftColor = u.fg;
      }
    }


    for( var i=0; i<p.mi.length; i++ ){
      var rail = p.mi[i];
      if( rail<0 ){
        rail = -rail;
        mergeLines[rail] = -mLine.w/2;
        var x = rail*railPitch + (node.w-mLine.w)/2;

        drawMergeLine(x,miLineY(p),null,btm);

      }
      drawMergeArrow(p,rail);















    }
  }
  var mergeLines;

  function renderGraph(){
    mergeLines = {};
    canvasDiv.innerHTML = "";
    var canvasY = absoluteY(canvasDiv);
    for(var i=0; i<tx.rowinfo.length; i++ ){
      var e = document.getElementById("m"+tx.rowinfo[i].id);
      tx.rowinfo[i].y = absoluteY(e) - canvasY;
................................................................................
      tx.rowinfo[i].x = tx.rowinfo[i].r*railPitch;
    }
    var tlBtm = document.querySelector(".timelineBottom");
    if( tlBtm.offsetHeight<node.h ){
      tlBtm.style.height = node.h + "px";
    }
    var btm = absoluteY(tlBtm) - canvasY + tlBtm.offsetHeight;

    for( var i=tx.rowinfo.length-1; i>=0; i-- ){
      drawNode(tx.rowinfo[i], btm);
    }
  }
  var selRow;
  function clickOnNode(){
    var p = tx.rowinfo[parseInt(this.id.match(/\d+$/)[0], 10)-tx.iTopRow];

  return rc;
}

/*
** Send content out over the open socket connection.
*/
size_t socket_send(void *NotUsed, const void *pContent, size_t N){
  ssize_t sent;
  size_t total = 0;
  while( N>0 ){
    sent = send(iSocket, pContent, N, 0);
    if( sent<=0 ) break;
    total += (size_t)sent;
    N -= (size_t)sent;
    pContent = (void*)&((char*)pContent)[sent];
  }
  return total;
}

/*
** Receive content back from the open socket connection.

  return rc;
}

/*
** Send content out over the open socket connection.
*/
size_t socket_send(void *NotUsed, const void *pContent, size_t N){
  size_t sent;
  size_t total = 0;
  while( N>0 ){
    sent = send(iSocket, pContent, N, 0);
    if( sent<=0 ) break;
    total += sent;
    N -= sent;
    pContent = (void*)&((char*)pContent)[sent];
  }
  return total;
}

/*
** Receive content back from the open socket connection.

  i64 fsize;
  int verboseFlag = find_option("verbose","v",0)!=0;
  if( !verboseFlag ){
    verboseFlag = find_option("detail","l",0)!=0; /* deprecated */
  }

  if( g.argc==3
   && file_isfile(g.argv[2], ExtFILE)
   && (fsize = file_size(g.argv[2], ExtFILE))>0
   && (fsize&0x1ff)==0
  ){
    db_open_config(0, 0);
    db_open_repository(g.argv[2]);
    db_record_repository_filename(g.argv[2]);
    fossil_print("project-name: %s\n", db_get("project-name", "<unnamed>"));
................................................................................
     "INSERT OR IGNORE INTO ok SELECT pid FROM plink WHERE cid=%d;",
     rid, rid
  );
  if( !parentsOnly ){
    db_multi_exec(
      "INSERT OR IGNORE INTO ok SELECT cid FROM plink WHERE pid=%d;", rid
    );
    if( db_table_exists("repository","cherrypick") ){
      db_multi_exec(
        "INSERT OR IGNORE INTO ok "
        "  SELECT parentid FROM cherrypick WHERE childid=%d;"
        "INSERT OR IGNORE INTO ok "
        "  SELECT childid FROM cherrypick WHERE parentid=%d;",
        rid, rid
      );
    }
  }
  blob_append_sql(&sql, " AND event.objid IN ok ORDER BY mtime DESC");
  db_prepare(&q, "%s", blob_sql_text(&sql));
  www_print_timeline(&q,
       TIMELINE_DISJOINT
         |TIMELINE_GRAPH
         |TIMELINE_NOSCROLL
         |TIMELINE_CHPICK,
       0, 0, rid, 0);
  db_finalize(&q);
}

/*
** Show a graph all wiki, tickets, and check-ins that refer to object zUuid.
**
** If zLabel is not NULL and the graph is not empty, then output zLabel as
................................................................................
  db_finalize(&q);
  style_footer();
}

/*
** WEBPAGE: vinfo
** WEBPAGE: ci
** URL:  /ci/ARTIFACTID
**  OR:  /ci?name=ARTIFACTID
**
** Display information about a particular check-in.  The exact
** same information is shown on the /info page if the name query
** parameter to /info describes a check-in.
**
** The ARTIFACTID can be a unique prefix for the HASH of the check-in,
** or a tag or branch name that identifies the check-in.

*/
void ci_page(void){
  Stmt q1, q2, q3;
  int rid;
  int isLeaf;
  int diffType;        /* 0: no diff,  1: unified,  2: side-by-side */
  u64 diffFlags;       /* Flag parameter for text_diff() */
................................................................................
    int nUuid = db_column_bytes(&q1, 0);
    char *zEUser, *zEComment;
    const char *zUser;
    const char *zOrigUser;
    const char *zComment;
    const char *zDate;
    const char *zOrigDate;
    const char *zBrName;
    int okWiki = 0;
    Blob wiki_read_links = BLOB_INITIALIZER;
    Blob wiki_add_links = BLOB_INITIALIZER;

    style_header("Check-in [%S]", zUuid);
    login_anonymous_available();
    zEUser = db_text(0,
                   "SELECT value FROM tagxref"
                   " WHERE tagid=%d AND rid=%d AND tagtype>0",
                    TAG_USER, rid);
    zEComment = db_text(0,
                   "SELECT value FROM tagxref WHERE tagid=%d AND rid=%d",
                   TAG_COMMENT, rid);
    zBrName = db_text(0,
                   "SELECT value FROM tagxref WHERE tagid=%d AND rid=%d",
                   TAG_BRANCH, rid);
    zOrigUser = db_column_text(&q1, 2);
    zUser = zEUser ? zEUser : zOrigUser;
    zComment = db_column_text(&q1, 3);
    zDate = db_column_text(&q1,1);
    zOrigDate = db_column_text(&q1, 4);
    if( zOrigDate==0 ) zOrigDate = zDate;
    @ <div class="section">Overview</div>
................................................................................
    }
    db_prepare(&q2,"SELECT substr(tag.tagname,5) FROM tagxref, tag "
                   " WHERE rid=%d AND tagtype>0 "
                   "   AND tag.tagid=tagxref.tagid "
                   "   AND +tag.tagname GLOB 'sym-*'", rid);
    while( db_step(&q2)==SQLITE_ROW ){
      const char *zTagName = db_column_text(&q2, 0);
      if( fossil_strcmp(zTagName,zBrName)==0 ){
        @  | %z(href("%R/timeline?r=%T&unhide",zTagName))%h(zTagName)</a>
        if( wiki_tagid2("branch",zTagName)!=0 ){
          blob_appendf(&wiki_read_links, " | %z%h</a>",
              href("%R/wiki?name=branch/%h",zTagName), zTagName);
        }else if( g.perm.Write && g.perm.WrWiki ){
          blob_appendf(&wiki_add_links, " | %z%h</a>",
              href("%R/wikiedit?name=branch/%h",zTagName), zTagName);
        }
      }else{
        @  | %z(href("%R/timeline?t=%T&unhide",zTagName))%h(zTagName)</a>
        if( wiki_tagid2("tag",zTagName)!=0 ){
          blob_appendf(&wiki_read_links, " | %z%h</a>",
              href("%R/wiki?name=tag/%h",zTagName), zTagName);
        }else if( g.perm.Write && g.perm.WrWiki ){
          blob_appendf(&wiki_add_links, " | %z%h</a>",
              href("%R/wikiedit?name=tag/%h",zTagName), zTagName);
        }
      }
    }
    db_finalize(&q2);
    @ </td></tr>

    @ <tr><th>Files:</th>
    @   <td>
    @     %z(href("%R/tree?ci=%!S",zUuid))files</a>
................................................................................
        const char *zDate = db_column_text(&q2, 2);
        if( zUser==0 || zUser[0]==0 ) zUser = "unknown";
        @ <tr><th>Received&nbsp;From:</th>
        @ <td>%h(zUser) @ %h(zIpAddr) on %s(zDate)</td></tr>
      }
      db_finalize(&q2);
    }

    /* Only show links to read wiki pages if the users can read wiki
    ** and if the wiki pages already exist */
    if( g.perm.RdWiki
     && ((okWiki = wiki_tagid2("checkin",zUuid))!=0 ||
                 blob_size(&wiki_read_links)>0)
     && db_get_boolean("wiki-about",1)
    ){
      const char *zLinks = blob_str(&wiki_read_links);
      @ <tr><th>Wiki:</th><td>\
      if( okWiki ){
        @ %z(href("%R/wiki?name=checkin/%s",zUuid))this checkin</a>\
      }else if( zLinks[0] ){
        zLinks += 3;
      }
      @ %s(zLinks)</td></tr>
    }

    /* Only show links to create new wiki pages if the users can write wiki
    ** and if the wiki pages do not already exist */
    if( g.perm.WrWiki
     && g.perm.RdWiki
     && g.perm.Write
     && (blob_size(&wiki_add_links)>0 || !okWiki)
     && db_get_boolean("wiki-about",1)
    ){
      const char *zLinks = blob_str(&wiki_add_links);
      @ <tr><th>Add&nbsp;Wiki:</th><td>\
      if( !okWiki ){
        @ %z(href("%R/wikiedit?name=checkin/%s",zUuid))this checkin</a>\
      }else if( zLinks[0] ){
        zLinks += 3;
      }
      @ %s(zLinks)</td></tr>
    }

    if( g.perm.Hyperlink ){
      @ <tr><th>Other&nbsp;Links:</th>
      @   <td>
      @   %z(href("%R/artifact/%!S",zUuid))manifest</a>
      @ | %z(href("%R/ci_tags/%!S",zUuid))tags</a>
      if( g.perm.Admin ){
        @   | %z(href("%R/mlink?ci=%!S",zUuid))mlink table</a>
................................................................................
      if( g.anon.Write ){
        @   | %z(href("%R/ci_edit?r=%!S",zUuid))edit</a>
      }
      @   </td>
      @ </tr>
    }
    @ </table>
    blob_reset(&wiki_read_links);
    blob_reset(&wiki_add_links);
  }else{
    style_header("Check-in Information");
    login_anonymous_available();
  }
  db_finalize(&q1);
  if( !PB("nowiki") ){
    wiki_render_associated("checkin", zUuid, 0);
  }
  render_backlink_graph(zUuid, "<div class=\"section\">References</div>\n");
  @ <div class="section">Context</div>
  render_checkin_context(rid, 0);
  @ <div class="section">Changes</div>
  @ <div class="sectionmenu">
  diffFlags = construct_diff_flags(diffType);
  zW = (diffFlags&DIFF_IGNORE_ALLWS)?"&w":"";
................................................................................
  int rid;
  Manifest *pWiki;
  char *zUuid;
  char *zDate;
  Blob wiki;
  int modPending;
  const char *zModAction;
  int tagid;
  int ridNext;

  login_check_credentials();
  if( !g.perm.RdWiki ){ login_needed(g.anon.RdWiki); return; }
  rid = name_to_rid_www("name");
  if( rid==0 || (pWiki = manifest_get(rid, CFTYPE_WIKI, 0))==0 ){
    style_header("Wiki Page Information Error");
    @ No such object: %h(P("name"))
................................................................................
  @ <tr><th>Artifact&nbsp;ID:</th>
  @ <td>%z(href("%R/artifact/%!S",zUuid))%s(zUuid)</a>
  if( g.perm.Setup ){
    @ (%d(rid))
  }
  modPending = moderation_pending_www(rid);
  @ </td></tr>
  @ <tr><th>Page&nbsp;Name:</th>\
  @ <td>%z(href("%R/whistory?name=%h",pWiki->zWikiTitle))\
  @ %h(pWiki->zWikiTitle)</a></td></tr>
  @ <tr><th>Date:</th><td>
  hyperlink_to_date(zDate, "</td></tr>");
  @ <tr><th>Original&nbsp;User:</th><td>
  hyperlink_to_user(pWiki->zUser, zDate, "</td></tr>");
  if( pWiki->zMimetype ){
    @ <tr><th>Mimetype:</th><td>%h(pWiki->zMimetype)</td></tr>
  }
  if( pWiki->nParent>0 ){
    int i;
    @ <tr><th>Parent%s(pWiki->nParent==1?"":"s"):</th><td>
    for(i=0; i<pWiki->nParent; i++){
      char *zParent = pWiki->azParent[i];
      @ %z(href("info/%!S",zParent))%s(zParent)</a>
      @ %z(href("%R/wdiff?id=%!S&pid=%!S",zUuid,zParent))(diff)</a>
    }
    @ </td></tr>
  }
  tagid = wiki_tagid(pWiki->zWikiTitle);
  if( tagid>0 && (ridNext = wiki_next(tagid, pWiki->rDate))>0 ){
    char *zId = db_text(0, "SELECT uuid FROM blob WHERE rid=%d", ridNext);
    @ <tr><th>Next</th>
    @ <td>%z(href("%R/info/%!S",zId))%s(zId)</a></td>
  }
  @ </table>

  if( g.perm.ModWiki && modPending ){
    @ <div class="section">Moderation</div>
    @ <blockquote>
    @ <form method="POST" action="%R/winfo/%s(zUuid)">
    @ <label><input type="radio" name="modaction" value="delete">
................................................................................
    @ <hr />
    content_get(rid, &content);
    if( renderAsWiki ){
      wiki_render_by_mimetype(&content, zMime);
    }else if( renderAsHtml ){
      @ <iframe src="%R/raw/%T(blob_str(&downloadName))?name=%s(zUuid)"
      @ width="100%%" frameborder="0" marginwidth="0" marginheight="0"
      @ sandbox="allow-same-origin" id="ifm1">
      @ </iframe>
      @ <script nonce="%h(style_nonce())">
      @ document.getElementById("ifm1").addEventListener("load",
      @   function(){
      @     this.height=this.contentDocument.documentElement.scrollHeight + 75;
      @   }
      @ );
      @ </script>
    }else{
      style_submenu_element("Hex", "%s/hexdump?name=%s", g.zTop, zUuid);
      blob_to_utf8_no_bom(&content, 0);
      zMime = mimetype_from_content(&content);
      @ <blockquote>
      if( zMime==0 ){
        const char *z;
................................................................................
  change_sym_tag(zNewBranch,"*");
}

/*
** The apply_newtags method is called after all newtags have been added
** and the control artifact is completed and then written to the DB.
*/
static void apply_newtags(
  Blob *ctrl,
  int rid,
  const char *zUuid,
  const char *zUserOvrd,  /* The user name on the control artifact */
  int fDryRun             /* Print control artifact, but make no changes */
){
  Stmt q;
  int nChng = 0;

  db_prepare(&q, "SELECT tag, prefix, value FROM newtags"
                 " ORDER BY prefix || tag");
  while( db_step(&q)==SQLITE_ROW ){
    const char *zTag = db_column_text(&q, 0);
................................................................................
      blob_appendf(ctrl, "T %s%F %s\n", zPrefix, zTag, zUuid);
    }
  }
  db_finalize(&q);
  if( nChng>0 ){
    int nrid;
    Blob cksum;
    if( zUserOvrd && zUserOvrd[0] ){
      blob_appendf(ctrl, "U %F\n", zUserOvrd);
    }else{
      blob_appendf(ctrl, "U %F\n", login_name());
    }
    md5sum_blob(ctrl, &cksum);
    blob_appendf(ctrl, "Z %b\n", &cksum);
    if( fDryRun ){
      assert( g.isHTTP==0 ); /* Only print control artifact in console mode. */
      fossil_print("%s", blob_str(ctrl));
      blob_reset(ctrl);
    }else{
      db_begin_transaction();
      g.markPrivate = content_is_private(rid);
      nrid = content_put(ctrl);
      manifest_crosslink(nrid, ctrl, MC_PERMIT_HOOKS);
      db_end_transaction(0);
    }
    assert( blob_is_reset(ctrl) );

  }
}

/*
** This method checks that the date can be parsed.
** Returns 1 if datetime() can validate, 0 otherwise.
*/
................................................................................
      if( P(zLabel) ) cancel_special(zTag);
    }
    db_finalize(&q);
    if( zHideFlag[0] ) hide_branch();
    if( zCloseFlag[0] ) close_leaf(rid);
    if( zNewTagFlag[0] && zNewTag[0] ) add_tag(zNewTag);
    if( zNewBrFlag[0] && zNewBranch[0] ) change_branch(rid,zNewBranch);
    apply_newtags(&ctrl, rid, zUuid, 0, 0);
    cgi_redirectf("%R/ci/%S", zUuid);
  }
  blob_zero(&comment);
  blob_append(&comment, zNewComment, -1);
  zUuid[10] = 0;
  style_header("Edit Check-in [%s]", zUuid);
  if( P("preview") ){
................................................................................
**    --bgcolor COLOR         Apply COLOR to this check-in
**    --branchcolor COLOR     Apply and propagate COLOR to the branch
**    --tag TAG               Add new TAG to this check-in
**    --cancel TAG            Cancel TAG from this check-in
**    --branch NAME           Make this check-in the start of branch NAME
**    --hide                  Hide branch starting from this check-in
**    --close                 Mark this "leaf" as closed
**    -n|--dry-run            Print control artifact, but make no changes
**    --date-override DATETIME  Set the change time on the control artifact
**    --user-override USER      Set the user name on the control artifact
**
** DATETIME may be "now" or "YYYY-MM-DDTHH:MM:SS.SSS". If in
** year-month-day form, it may be truncated, the "T" may be replaced by
** a space, and it may also name a timezone offset from UTC as "-HH:MM"
** (westward) or "+HH:MM" (eastward). Either no timezone suffix or "Z"
** means UTC.
*/
................................................................................
  int fClose;                   /* True if leaf should be closed */
  int fHide;                    /* True if branch should be hidden */
  int fPropagateColor;          /* True if color propagates before amend */
  int fNewPropagateColor = 0;   /* True if color propagates after amend */
  int fHasHidden = 0;           /* True if hidden tag already set */
  int fHasClosed = 0;           /* True if closed tag already set */
  int fEditComment;             /* True if editor to be used for comment */
  int fDryRun;                  /* Print control artifact, make no changes */
  const char *zChngTime;        /* The change time on the control artifact */
  const char *zUserOvrd;        /* The user name on the control artifact */
  const char *zUuid;
  Blob ctrl;
  Blob comment;
  char *zNow;
  int nTags, nCancels;
  int i;
  Stmt q;
................................................................................
  }
  zNewDate = find_option("date",0,1);
  zNewUser = find_option("author",0,1);
  pzNewTags = find_repeatable_option("tag",0,&nTags);
  pzCancelTags = find_repeatable_option("cancel",0,&nCancels);
  fClose = find_option("close",0,0)!=0;
  fHide = find_option("hide",0,0)!=0;
  fDryRun = find_option("dry-run","n",0)!=0;
  if( fDryRun==0 ) fDryRun = find_option("dryrun","n",0)!=0;
  zChngTime = find_option("date-override",0,1);
  if( zChngTime==0 ) zChngTime = find_option("chngtime",0,1);
  zUserOvrd = find_option("user-override",0,1);
  db_find_and_open_repository(0,0);
  user_select();
  verify_all_options();
  if( g.argc<3 || g.argc>=4 ) usage(AMEND_USAGE_STMT);
  rid = name_to_typed_rid(g.argv[2], "ci");
  if( rid==0 && !is_a_version(rid) ) fossil_fatal("no such check-in");
  zUuid = db_text(0, "SELECT uuid FROM blob WHERE rid=%d", rid);
................................................................................
        cancel_tag(rid,pzCancelTags[i]);
    }
    fossil_free((void *)pzCancelTags);
  }
  if( fHide && !fHasHidden ) hide_branch();
  if( fClose && !fHasClosed ) close_leaf(rid);
  if( zNewBranch && zNewBranch[0] ) change_branch(rid,zNewBranch);
  apply_newtags(&ctrl, rid, zUuid, zUserOvrd, fDryRun);
  if( fDryRun==0 ){
    show_common_info(rid, "uuid:", 1, 0);
  }
}

  i64 fsize;
  int verboseFlag = find_option("verbose","v",0)!=0;
  if( !verboseFlag ){
    verboseFlag = find_option("detail","l",0)!=0; /* deprecated */
  }

  if( g.argc==3

   && (fsize = file_size(g.argv[2], ExtFILE))>0
   && (fsize&0x1ff)==0
  ){
    db_open_config(0, 0);
    db_open_repository(g.argv[2]);
    db_record_repository_filename(g.argv[2]);
    fossil_print("project-name: %s\n", db_get("project-name", "<unnamed>"));
................................................................................
     "INSERT OR IGNORE INTO ok SELECT pid FROM plink WHERE cid=%d;",
     rid, rid
  );
  if( !parentsOnly ){
    db_multi_exec(
      "INSERT OR IGNORE INTO ok SELECT cid FROM plink WHERE pid=%d;", rid
    );









  }
  blob_append_sql(&sql, " AND event.objid IN ok ORDER BY mtime DESC");
  db_prepare(&q, "%s", blob_sql_text(&sql));
  www_print_timeline(&q, TIMELINE_DISJOINT|TIMELINE_GRAPH|TIMELINE_NOSCROLL,




                     0, 0, rid, 0);
  db_finalize(&q);
}

/*
** Show a graph all wiki, tickets, and check-ins that refer to object zUuid.
**
** If zLabel is not NULL and the graph is not empty, then output zLabel as
................................................................................
  db_finalize(&q);
  style_footer();
}

/*
** WEBPAGE: vinfo
** WEBPAGE: ci
** URL:  /ci?name=ARTIFACTID
** URL:  /vinfo?name=ARTIFACTID
**
** Display information about a particular check-in.
**
** We also jump here from /info if the name is a check-in
**
** If the /ci and /vinfo pages used to differ in their default
** diff settings, but now diff settings persist with a cookie and
** so /ci and /vinfo behave the same.
*/
void ci_page(void){
  Stmt q1, q2, q3;
  int rid;
  int isLeaf;
  int diffType;        /* 0: no diff,  1: unified,  2: side-by-side */
  u64 diffFlags;       /* Flag parameter for text_diff() */
................................................................................
    int nUuid = db_column_bytes(&q1, 0);
    char *zEUser, *zEComment;
    const char *zUser;
    const char *zOrigUser;
    const char *zComment;
    const char *zDate;
    const char *zOrigDate;





    style_header("Check-in [%S]", zUuid);
    login_anonymous_available();
    zEUser = db_text(0,
                   "SELECT value FROM tagxref"
                   " WHERE tagid=%d AND rid=%d AND tagtype>0",
                    TAG_USER, rid);
    zEComment = db_text(0,
                   "SELECT value FROM tagxref WHERE tagid=%d AND rid=%d",
                   TAG_COMMENT, rid);



    zOrigUser = db_column_text(&q1, 2);
    zUser = zEUser ? zEUser : zOrigUser;
    zComment = db_column_text(&q1, 3);
    zDate = db_column_text(&q1,1);
    zOrigDate = db_column_text(&q1, 4);
    if( zOrigDate==0 ) zOrigDate = zDate;
    @ <div class="section">Overview</div>
................................................................................
    }
    db_prepare(&q2,"SELECT substr(tag.tagname,5) FROM tagxref, tag "
                   " WHERE rid=%d AND tagtype>0 "
                   "   AND tag.tagid=tagxref.tagid "
                   "   AND +tag.tagname GLOB 'sym-*'", rid);
    while( db_step(&q2)==SQLITE_ROW ){
      const char *zTagName = db_column_text(&q2, 0);

      @  | %z(href("%R/timeline?r=%T&unhide",zTagName))%h(zTagName)</a>

















    }
    db_finalize(&q2);
    @ </td></tr>

    @ <tr><th>Files:</th>
    @   <td>
    @     %z(href("%R/tree?ci=%!S",zUuid))files</a>
................................................................................
        const char *zDate = db_column_text(&q2, 2);
        if( zUser==0 || zUser[0]==0 ) zUser = "unknown";
        @ <tr><th>Received&nbsp;From:</th>
        @ <td>%h(zUser) @ %h(zIpAddr) on %s(zDate)</td></tr>
      }
      db_finalize(&q2);
    }




































    if( g.perm.Hyperlink ){
      @ <tr><th>Other&nbsp;Links:</th>
      @   <td>
      @   %z(href("%R/artifact/%!S",zUuid))manifest</a>
      @ | %z(href("%R/ci_tags/%!S",zUuid))tags</a>
      if( g.perm.Admin ){
        @   | %z(href("%R/mlink?ci=%!S",zUuid))mlink table</a>
................................................................................
      if( g.anon.Write ){
        @   | %z(href("%R/ci_edit?r=%!S",zUuid))edit</a>
      }
      @   </td>
      @ </tr>
    }
    @ </table>


  }else{
    style_header("Check-in Information");
    login_anonymous_available();
  }
  db_finalize(&q1);



  render_backlink_graph(zUuid, "<div class=\"section\">References</div>\n");
  @ <div class="section">Context</div>
  render_checkin_context(rid, 0);
  @ <div class="section">Changes</div>
  @ <div class="sectionmenu">
  diffFlags = construct_diff_flags(diffType);
  zW = (diffFlags&DIFF_IGNORE_ALLWS)?"&w":"";
................................................................................
  int rid;
  Manifest *pWiki;
  char *zUuid;
  char *zDate;
  Blob wiki;
  int modPending;
  const char *zModAction;



  login_check_credentials();
  if( !g.perm.RdWiki ){ login_needed(g.anon.RdWiki); return; }
  rid = name_to_rid_www("name");
  if( rid==0 || (pWiki = manifest_get(rid, CFTYPE_WIKI, 0))==0 ){
    style_header("Wiki Page Information Error");
    @ No such object: %h(P("name"))
................................................................................
  @ <tr><th>Artifact&nbsp;ID:</th>
  @ <td>%z(href("%R/artifact/%!S",zUuid))%s(zUuid)</a>
  if( g.perm.Setup ){
    @ (%d(rid))
  }
  modPending = moderation_pending_www(rid);
  @ </td></tr>
  @ <tr><th>Page&nbsp;Name:</th><td>%h(pWiki->zWikiTitle)</td></tr>


  @ <tr><th>Date:</th><td>
  hyperlink_to_date(zDate, "</td></tr>");
  @ <tr><th>Original&nbsp;User:</th><td>
  hyperlink_to_user(pWiki->zUser, zDate, "</td></tr>");
  if( pWiki->zMimetype ){
    @ <tr><th>Mimetype:</th><td>%h(pWiki->zMimetype)</td></tr>
  }
  if( pWiki->nParent>0 ){
    int i;
    @ <tr><th>Parent%s(pWiki->nParent==1?"":"s"):</th><td>
    for(i=0; i<pWiki->nParent; i++){
      char *zParent = pWiki->azParent[i];
      @ %z(href("info/%!S",zParent))%s(zParent)</a>

    }
    @ </td></tr>
  }






  @ </table>

  if( g.perm.ModWiki && modPending ){
    @ <div class="section">Moderation</div>
    @ <blockquote>
    @ <form method="POST" action="%R/winfo/%s(zUuid)">
    @ <label><input type="radio" name="modaction" value="delete">
................................................................................
    @ <hr />
    content_get(rid, &content);
    if( renderAsWiki ){
      wiki_render_by_mimetype(&content, zMime);
    }else if( renderAsHtml ){
      @ <iframe src="%R/raw/%T(blob_str(&downloadName))?name=%s(zUuid)"
      @ width="100%%" frameborder="0" marginwidth="0" marginheight="0"
      @ sandbox="allow-same-origin"




      @ onload="this.height=this.contentDocument.documentElement.scrollHeight;">


      @ </iframe>
    }else{
      style_submenu_element("Hex", "%s/hexdump?name=%s", g.zTop, zUuid);
      blob_to_utf8_no_bom(&content, 0);
      zMime = mimetype_from_content(&content);
      @ <blockquote>
      if( zMime==0 ){
        const char *z;
................................................................................
  change_sym_tag(zNewBranch,"*");
}

/*
** The apply_newtags method is called after all newtags have been added
** and the control artifact is completed and then written to the DB.
*/
static void apply_newtags(Blob *ctrl, int rid, const char *zUuid){






  Stmt q;
  int nChng = 0;

  db_prepare(&q, "SELECT tag, prefix, value FROM newtags"
                 " ORDER BY prefix || tag");
  while( db_step(&q)==SQLITE_ROW ){
    const char *zTag = db_column_text(&q, 0);
................................................................................
      blob_appendf(ctrl, "T %s%F %s\n", zPrefix, zTag, zUuid);
    }
  }
  db_finalize(&q);
  if( nChng>0 ){
    int nrid;
    Blob cksum;



    blob_appendf(ctrl, "U %F\n", login_name());

    md5sum_blob(ctrl, &cksum);
    blob_appendf(ctrl, "Z %b\n", &cksum);





    db_begin_transaction();
    g.markPrivate = content_is_private(rid);
    nrid = content_put(ctrl);
    manifest_crosslink(nrid, ctrl, MC_PERMIT_HOOKS);


    assert( blob_is_reset(ctrl) );
    db_end_transaction(0);
  }
}

/*
** This method checks that the date can be parsed.
** Returns 1 if datetime() can validate, 0 otherwise.
*/
................................................................................
      if( P(zLabel) ) cancel_special(zTag);
    }
    db_finalize(&q);
    if( zHideFlag[0] ) hide_branch();
    if( zCloseFlag[0] ) close_leaf(rid);
    if( zNewTagFlag[0] && zNewTag[0] ) add_tag(zNewTag);
    if( zNewBrFlag[0] && zNewBranch[0] ) change_branch(rid,zNewBranch);
    apply_newtags(&ctrl, rid, zUuid);
    cgi_redirectf("%R/ci/%S", zUuid);
  }
  blob_zero(&comment);
  blob_append(&comment, zNewComment, -1);
  zUuid[10] = 0;
  style_header("Edit Check-in [%s]", zUuid);
  if( P("preview") ){
................................................................................
**    --bgcolor COLOR         Apply COLOR to this check-in
**    --branchcolor COLOR     Apply and propagate COLOR to the branch
**    --tag TAG               Add new TAG to this check-in
**    --cancel TAG            Cancel TAG from this check-in
**    --branch NAME           Make this check-in the start of branch NAME
**    --hide                  Hide branch starting from this check-in
**    --close                 Mark this "leaf" as closed



**
** DATETIME may be "now" or "YYYY-MM-DDTHH:MM:SS.SSS". If in
** year-month-day form, it may be truncated, the "T" may be replaced by
** a space, and it may also name a timezone offset from UTC as "-HH:MM"
** (westward) or "+HH:MM" (eastward). Either no timezone suffix or "Z"
** means UTC.
*/
................................................................................
  int fClose;                   /* True if leaf should be closed */
  int fHide;                    /* True if branch should be hidden */
  int fPropagateColor;          /* True if color propagates before amend */
  int fNewPropagateColor = 0;   /* True if color propagates after amend */
  int fHasHidden = 0;           /* True if hidden tag already set */
  int fHasClosed = 0;           /* True if closed tag already set */
  int fEditComment;             /* True if editor to be used for comment */

  const char *zChngTime;        /* The change time on the control artifact */

  const char *zUuid;
  Blob ctrl;
  Blob comment;
  char *zNow;
  int nTags, nCancels;
  int i;
  Stmt q;
................................................................................
  }
  zNewDate = find_option("date",0,1);
  zNewUser = find_option("author",0,1);
  pzNewTags = find_repeatable_option("tag",0,&nTags);
  pzCancelTags = find_repeatable_option("cancel",0,&nCancels);
  fClose = find_option("close",0,0)!=0;
  fHide = find_option("hide",0,0)!=0;



  zChngTime = find_option("chngtime",0,1);

  db_find_and_open_repository(0,0);
  user_select();
  verify_all_options();
  if( g.argc<3 || g.argc>=4 ) usage(AMEND_USAGE_STMT);
  rid = name_to_typed_rid(g.argv[2], "ci");
  if( rid==0 && !is_a_version(rid) ) fossil_fatal("no such check-in");
  zUuid = db_text(0, "SELECT uuid FROM blob WHERE rid=%d", rid);
................................................................................
        cancel_tag(rid,pzCancelTags[i]);
    }
    fossil_free((void *)pzCancelTags);
  }
  if( fHide && !fHasHidden ) hide_branch();
  if( fClose && !fHasClosed ) close_leaf(rid);
  if( zNewBranch && zNewBranch[0] ) change_branch(rid,zNewBranch);
  apply_newtags(&ctrl, rid, zUuid);

  show_common_info(rid, "uuid:", 1, 0);
}

      fossil_fatal(
        "unrecognized command-line option, or missing argument: %s",
        g.argv[i]);
    }
  }
}






/*
** This function returns a human readable version string.
*/
const char *get_version(){
  static const char version[] = RELEASE_VERSION " " MANIFEST_VERSION " "
                                MANIFEST_DATE " UTC";
................................................................................
    if( g.db==0 && file_isfile(zRepo, ExtFILE) ){
      db_open_repository(zRepo);
    }
  }
#endif
  return zRepo;
}

















































































































































/*
** Called whenever a crash is encountered while processing a webpage.
*/
void sigsegv_handler(int x){
#if HAVE_BACKTRACE
  void *array[20];
................................................................................
  noJail = find_option("nojail",0,0)!=0;
  allowRepoList = find_option("repolist",0,0)!=0;
  g.useLocalauth = find_option("localauth", 0, 0)!=0;
  g.sslNotAvailable = find_option("nossl", 0, 0)!=0;
  g.fNoHttpCompress = find_option("nocompress",0,0)!=0;
  zInFile = find_option("in",0,1);
  if( zInFile ){
    backoffice_disable();
    g.httpIn = fossil_fopen(zInFile, "rb");
    if( g.httpIn==0 ) fossil_fatal("cannot open \"%s\" for reading", zInFile);
  }else{
    g.httpIn = stdin;
  }
  zOutFile = find_option("out",0,1);
  if( zOutFile ){
................................................................................
**     case=6           Call webpage_assert()
**     case=7           Call webpage_error()
*/
void test_warning_page(void){
  int iCase = atoi(PD("case","0"));
  int i;
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("Warning Test Page");
  style_submenu_element("Error Log","%R/errorlog");
  if( iCase<1 || iCase>4 ){
    @ <p>Generate a message to the <a href="%R/errorlog">error log</a>

      fossil_fatal(
        "unrecognized command-line option, or missing argument: %s",
        g.argv[i]);
    }
  }
}

/*
** Print a list of words in multiple columns.
*/


/*
** This function returns a human readable version string.
*/
const char *get_version(){
  static const char version[] = RELEASE_VERSION " " MANIFEST_VERSION " "
                                MANIFEST_DATE " UTC";
................................................................................
    if( g.db==0 && file_isfile(zRepo, ExtFILE) ){
      db_open_repository(zRepo);
    }
  }
#endif
  return zRepo;
}

/*
** Generate a web-page that lists all repositories located under the
** g.zRepositoryName directory and return non-zero.
**
** For the special case when g.zRepositoryName a non-chroot-jail "/",
** compose the list using the "repo:" entries in the global_config
** table of the configuration database.  These entries comprise all
** of the repositories known to the "all" command.  The special case
** processing is disallowed for chroot jails because g.zRepositoryName
** is always "/" inside a chroot jail and so it cannot be used as a flag
** to signal the special processing in that case.  The special case
** processing is intended for the "fossil all ui" command which never
** runs in a chroot jail anyhow.
**
** Or, if no repositories can be located beneath g.zRepositoryName,
** return 0.
*/
static int repo_list_page(void){
  Blob base;
  int n = 0;
  int allRepo;

  assert( g.db==0 );
  if( fossil_strcmp(g.zRepositoryName,"/")==0 && !g.fJail ){
    /* For the special case of the "repository directory" being "/",
    ** show all of the repositories named in the ~/.fossil database.
    **
    ** On unix systems, then entries are of the form "repo:/home/..."
    ** and on Windows systems they are like on unix, starting with a "/"
    ** or they can begin with a drive letter: "repo:C:/Users/...".  In either
    ** case, we want returned path to omit any initial "/".
    */
    db_open_config(1, 0);
    db_multi_exec(
       "CREATE TEMP VIEW sfile AS"
       "  SELECT ltrim(substr(name,6),'/') AS 'pathname' FROM global_config"
       "   WHERE name GLOB 'repo:*'"
    );
    allRepo = 1;
  }else{
    /* The default case:  All repositories under the g.zRepositoryName
    ** directory.
    */
    blob_init(&base, g.zRepositoryName, -1);
    sqlite3_open(":memory:", &g.db);
    db_multi_exec("CREATE TABLE sfile(pathname TEXT);");
    db_multi_exec("CREATE TABLE vfile(pathname);");
    vfile_scan(&base, blob_size(&base), 0, 0, 0);
    db_multi_exec("DELETE FROM sfile WHERE pathname NOT GLOB '*[^/].fossil'");
    allRepo = 0;
  }
  @ <html>
  @ <head>
  @ <base href="%s(g.zBaseURL)/" />
  @ <meta name="viewport" content="width=device-width, initial-scale=1.0">
  @ <title>Repository List</title>
  @ </head>
  @ <body>
  n = db_int(0, "SELECT count(*) FROM sfile");
  if( n>0 ){
    Stmt q;
    sqlite3_int64 iNow, iMTime;
    @ <h1 align="center">Fossil Repositories</h1>
    @ <table border="0" class="sortable" data-init-sort="1" \
    @ data-column-types="tnk"><thead>
    @ <tr><th>Filename<th width="20"><th>Last Modified</tr>
    @ </thead><tbody>
    db_prepare(&q, "SELECT pathname"
                   " FROM sfile ORDER BY pathname COLLATE nocase;");
    iNow = db_int64(0, "SELECT strftime('%%s','now')");
    while( db_step(&q)==SQLITE_ROW ){
      const char *zName = db_column_text(&q, 0);
      int nName = (int)strlen(zName);
      char *zUrl;
      char *zAge;
      char *zFull;
      if( nName<7 ) continue;
      zUrl = sqlite3_mprintf("%.*s", nName-7, zName);
      if( zName[0]=='/'
#ifdef _WIN32
          || sqlite3_strglob("[a-zA-Z]:/*", zName)==0
#endif
      ){
        zFull = mprintf("%s", zName);
      }else if ( allRepo ){
        zFull = mprintf("/%s", zName);
      }else{
        zFull = mprintf("%s/%s", g.zRepositoryName, zName);
      }
      iMTime = file_mtime(zFull, ExtFILE);
      fossil_free(zFull);
      if( iMTime<=0 ){
        zAge = mprintf("...");
      }else{
        zAge = human_readable_age((iNow - iMTime)/86400.0);
      }
      if( sqlite3_strglob("*.fossil", zName)!=0 ){
        /* The "fossil server DIRECTORY" and "fossil ui DIRECTORY" commands
        ** do not work for repositories whose names do not end in ".fossil".
        ** So do not hyperlink those cases. */
        @ <tr><td>%h(zName)
      } else if( sqlite3_strglob("*/.*", zName)==0 ){
        /* Do not show hidden repos */
        @ <tr><td>%h(zName) (hidden)
      } else if( allRepo && sqlite3_strglob("[a-zA-Z]:/?*", zName)!=0 ){
        @ <tr><td><a href="%R/%T(zUrl)/home" target="_blank">/%h(zName)</a>
      }else{
        @ <tr><td><a href="%R/%T(zUrl)/home" target="_blank">%h(zName)</a>
      }
      @ <td></td><td data-sortkey='%010llx(iNow - iMTime)'>%h(zAge)</tr>
      fossil_free(zAge);
      sqlite3_free(zUrl);
    }
    @ </tbody></table>
  }else{
    @ <h1>No Repositories Found</h1>
  }
  @ <script>%s(builtin_text("sorttable.js"))</script>
  @ </body>
  @ </html>
  cgi_reply();
  sqlite3_close(g.db);
  g.db = 0;
  return n;
}

/*
** COMMAND: test-list-page
**
** Usage: %fossil test-list-page DIRECTORY
**
** Show all repositories underneath DIRECTORY.  Or if DIRECTORY is "/"
** show all repositories in the ~/.fossil file.
*/
void test_list_page(void){
  if( g.argc<3 ){
    g.zRepositoryName = "/";
  }else{
    g.zRepositoryName = g.argv[2];
  }
  g.httpOut = stdout;
  repo_list_page();
}

/*
** Called whenever a crash is encountered while processing a webpage.
*/
void sigsegv_handler(int x){
#if HAVE_BACKTRACE
  void *array[20];
................................................................................
  noJail = find_option("nojail",0,0)!=0;
  allowRepoList = find_option("repolist",0,0)!=0;
  g.useLocalauth = find_option("localauth", 0, 0)!=0;
  g.sslNotAvailable = find_option("nossl", 0, 0)!=0;
  g.fNoHttpCompress = find_option("nocompress",0,0)!=0;
  zInFile = find_option("in",0,1);
  if( zInFile ){

    g.httpIn = fossil_fopen(zInFile, "rb");
    if( g.httpIn==0 ) fossil_fatal("cannot open \"%s\" for reading", zInFile);
  }else{
    g.httpIn = stdin;
  }
  zOutFile = find_option("out",0,1);
  if( zOutFile ){
................................................................................
**     case=6           Call webpage_assert()
**     case=7           Call webpage_error()
*/
void test_warning_page(void){
  int iCase = atoi(PD("case","0"));
  int i;
  login_check_credentials();
  if( !g.perm.Setup && !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("Warning Test Page");
  style_submenu_element("Error Log","%R/errorlog");
  if( iCase<1 || iCase>4 ){
    @ <p>Generate a message to the <a href="%R/errorlog">error log</a>

  $(SRCDIR)/popen.c \
  $(SRCDIR)/pqueue.c \
  $(SRCDIR)/printf.c \
  $(SRCDIR)/publish.c \
  $(SRCDIR)/purge.c \
  $(SRCDIR)/rebuild.c \
  $(SRCDIR)/regexp.c \
  $(SRCDIR)/repolist.c \
  $(SRCDIR)/report.c \
  $(SRCDIR)/rss.c \
  $(SRCDIR)/schema.c \
  $(SRCDIR)/search.c \
  $(SRCDIR)/security_audit.c \
  $(SRCDIR)/setup.c \
  $(SRCDIR)/setupuser.c \
................................................................................
  $(OBJDIR)/popen_.c \
  $(OBJDIR)/pqueue_.c \
  $(OBJDIR)/printf_.c \
  $(OBJDIR)/publish_.c \
  $(OBJDIR)/purge_.c \
  $(OBJDIR)/rebuild_.c \
  $(OBJDIR)/regexp_.c \
  $(OBJDIR)/repolist_.c \
  $(OBJDIR)/report_.c \
  $(OBJDIR)/rss_.c \
  $(OBJDIR)/schema_.c \
  $(OBJDIR)/search_.c \
  $(OBJDIR)/security_audit_.c \
  $(OBJDIR)/setup_.c \
  $(OBJDIR)/setupuser_.c \
................................................................................
 $(OBJDIR)/popen.o \
 $(OBJDIR)/pqueue.o \
 $(OBJDIR)/printf.o \
 $(OBJDIR)/publish.o \
 $(OBJDIR)/purge.o \
 $(OBJDIR)/rebuild.o \
 $(OBJDIR)/regexp.o \
 $(OBJDIR)/repolist.o \
 $(OBJDIR)/report.o \
 $(OBJDIR)/rss.o \
 $(OBJDIR)/schema.o \
 $(OBJDIR)/search.o \
 $(OBJDIR)/security_audit.o \
 $(OBJDIR)/setup.o \
 $(OBJDIR)/setupuser.o \
................................................................................
                 -DSQLITE_OMIT_LOAD_EXTENSION \
                 -DSQLITE_MAX_EXPR_DEPTH=0 \
                 -DSQLITE_USE_ALLOCA \
                 -DSQLITE_ENABLE_LOCKING_STYLE=0 \
                 -DSQLITE_DEFAULT_FILE_FORMAT=4 \
                 -DSQLITE_ENABLE_EXPLAIN_COMMENTS \
                 -DSQLITE_ENABLE_FTS4 \

                 -DSQLITE_ENABLE_DBSTAT_VTAB \
                 -DSQLITE_ENABLE_JSON1 \
                 -DSQLITE_ENABLE_FTS5 \
                 -DSQLITE_ENABLE_STMTVTAB \
                 -DSQLITE_HAVE_ZLIB \
                 -DSQLITE_INTROSPECTION_PRAGMAS \
                 -DSQLITE_ENABLE_DBPAGE_VTAB
................................................................................
                -DSQLITE_OMIT_LOAD_EXTENSION \
                -DSQLITE_MAX_EXPR_DEPTH=0 \
                -DSQLITE_USE_ALLOCA \
                -DSQLITE_ENABLE_LOCKING_STYLE=0 \
                -DSQLITE_DEFAULT_FILE_FORMAT=4 \
                -DSQLITE_ENABLE_EXPLAIN_COMMENTS \
                -DSQLITE_ENABLE_FTS4 \

                -DSQLITE_ENABLE_DBSTAT_VTAB \
                -DSQLITE_ENABLE_JSON1 \
                -DSQLITE_ENABLE_FTS5 \
                -DSQLITE_ENABLE_STMTVTAB \
                -DSQLITE_HAVE_ZLIB \
                -DSQLITE_INTROSPECTION_PRAGMAS \
                -DSQLITE_ENABLE_DBPAGE_VTAB \
................................................................................
	$(OBJDIR)/popen_.c:$(OBJDIR)/popen.h \
	$(OBJDIR)/pqueue_.c:$(OBJDIR)/pqueue.h \
	$(OBJDIR)/printf_.c:$(OBJDIR)/printf.h \
	$(OBJDIR)/publish_.c:$(OBJDIR)/publish.h \
	$(OBJDIR)/purge_.c:$(OBJDIR)/purge.h \
	$(OBJDIR)/rebuild_.c:$(OBJDIR)/rebuild.h \
	$(OBJDIR)/regexp_.c:$(OBJDIR)/regexp.h \
	$(OBJDIR)/repolist_.c:$(OBJDIR)/repolist.h \
	$(OBJDIR)/report_.c:$(OBJDIR)/report.h \
	$(OBJDIR)/rss_.c:$(OBJDIR)/rss.h \
	$(OBJDIR)/schema_.c:$(OBJDIR)/schema.h \
	$(OBJDIR)/search_.c:$(OBJDIR)/search.h \
	$(OBJDIR)/security_audit_.c:$(OBJDIR)/security_audit.h \
	$(OBJDIR)/setup_.c:$(OBJDIR)/setup.h \
	$(OBJDIR)/setupuser_.c:$(OBJDIR)/setupuser.h \
................................................................................
	$(OBJDIR)/translate $(SRCDIR)/regexp.c >$@

$(OBJDIR)/regexp.o:	$(OBJDIR)/regexp_.c $(OBJDIR)/regexp.h $(SRCDIR)/config.h
	$(XTCC) -o $(OBJDIR)/regexp.o -c $(OBJDIR)/regexp_.c

$(OBJDIR)/regexp.h:	$(OBJDIR)/headers

$(OBJDIR)/repolist_.c:	$(SRCDIR)/repolist.c $(OBJDIR)/translate
	$(OBJDIR)/translate $(SRCDIR)/repolist.c >$@

$(OBJDIR)/repolist.o:	$(OBJDIR)/repolist_.c $(OBJDIR)/repolist.h $(SRCDIR)/config.h
	$(XTCC) -o $(OBJDIR)/repolist.o -c $(OBJDIR)/repolist_.c

$(OBJDIR)/repolist.h:	$(OBJDIR)/headers

$(OBJDIR)/report_.c:	$(SRCDIR)/report.c $(OBJDIR)/translate
	$(OBJDIR)/translate $(SRCDIR)/report.c >$@

$(OBJDIR)/report.o:	$(OBJDIR)/report_.c $(OBJDIR)/report.h $(SRCDIR)/config.h
	$(XTCC) -o $(OBJDIR)/report.o -c $(OBJDIR)/report_.c

$(OBJDIR)/report.h:	$(OBJDIR)/headers

  $(SRCDIR)/popen.c \
  $(SRCDIR)/pqueue.c \
  $(SRCDIR)/printf.c \
  $(SRCDIR)/publish.c \
  $(SRCDIR)/purge.c \
  $(SRCDIR)/rebuild.c \
  $(SRCDIR)/regexp.c \

  $(SRCDIR)/report.c \
  $(SRCDIR)/rss.c \
  $(SRCDIR)/schema.c \
  $(SRCDIR)/search.c \
  $(SRCDIR)/security_audit.c \
  $(SRCDIR)/setup.c \
  $(SRCDIR)/setupuser.c \
................................................................................
  $(OBJDIR)/popen_.c \
  $(OBJDIR)/pqueue_.c \
  $(OBJDIR)/printf_.c \
  $(OBJDIR)/publish_.c \
  $(OBJDIR)/purge_.c \
  $(OBJDIR)/rebuild_.c \
  $(OBJDIR)/regexp_.c \

  $(OBJDIR)/report_.c \
  $(OBJDIR)/rss_.c \
  $(OBJDIR)/schema_.c \
  $(OBJDIR)/search_.c \
  $(OBJDIR)/security_audit_.c \
  $(OBJDIR)/setup_.c \
  $(OBJDIR)/setupuser_.c \
................................................................................
 $(OBJDIR)/popen.o \
 $(OBJDIR)/pqueue.o \
 $(OBJDIR)/printf.o \
 $(OBJDIR)/publish.o \
 $(OBJDIR)/purge.o \
 $(OBJDIR)/rebuild.o \
 $(OBJDIR)/regexp.o \

 $(OBJDIR)/report.o \
 $(OBJDIR)/rss.o \
 $(OBJDIR)/schema.o \
 $(OBJDIR)/search.o \
 $(OBJDIR)/security_audit.o \
 $(OBJDIR)/setup.o \
 $(OBJDIR)/setupuser.o \
................................................................................
                 -DSQLITE_OMIT_LOAD_EXTENSION \
                 -DSQLITE_MAX_EXPR_DEPTH=0 \
                 -DSQLITE_USE_ALLOCA \
                 -DSQLITE_ENABLE_LOCKING_STYLE=0 \
                 -DSQLITE_DEFAULT_FILE_FORMAT=4 \
                 -DSQLITE_ENABLE_EXPLAIN_COMMENTS \
                 -DSQLITE_ENABLE_FTS4 \
                 -DSQLITE_ENABLE_FTS3_PARENTHESIS \
                 -DSQLITE_ENABLE_DBSTAT_VTAB \
                 -DSQLITE_ENABLE_JSON1 \
                 -DSQLITE_ENABLE_FTS5 \
                 -DSQLITE_ENABLE_STMTVTAB \
                 -DSQLITE_HAVE_ZLIB \
                 -DSQLITE_INTROSPECTION_PRAGMAS \
                 -DSQLITE_ENABLE_DBPAGE_VTAB
................................................................................
                -DSQLITE_OMIT_LOAD_EXTENSION \
                -DSQLITE_MAX_EXPR_DEPTH=0 \
                -DSQLITE_USE_ALLOCA \
                -DSQLITE_ENABLE_LOCKING_STYLE=0 \
                -DSQLITE_DEFAULT_FILE_FORMAT=4 \
                -DSQLITE_ENABLE_EXPLAIN_COMMENTS \
                -DSQLITE_ENABLE_FTS4 \
                -DSQLITE_ENABLE_FTS3_PARENTHESIS \
                -DSQLITE_ENABLE_DBSTAT_VTAB \
                -DSQLITE_ENABLE_JSON1 \
                -DSQLITE_ENABLE_FTS5 \
                -DSQLITE_ENABLE_STMTVTAB \
                -DSQLITE_HAVE_ZLIB \
                -DSQLITE_INTROSPECTION_PRAGMAS \
                -DSQLITE_ENABLE_DBPAGE_VTAB \
................................................................................
	$(OBJDIR)/popen_.c:$(OBJDIR)/popen.h \
	$(OBJDIR)/pqueue_.c:$(OBJDIR)/pqueue.h \
	$(OBJDIR)/printf_.c:$(OBJDIR)/printf.h \
	$(OBJDIR)/publish_.c:$(OBJDIR)/publish.h \
	$(OBJDIR)/purge_.c:$(OBJDIR)/purge.h \
	$(OBJDIR)/rebuild_.c:$(OBJDIR)/rebuild.h \
	$(OBJDIR)/regexp_.c:$(OBJDIR)/regexp.h \

	$(OBJDIR)/report_.c:$(OBJDIR)/report.h \
	$(OBJDIR)/rss_.c:$(OBJDIR)/rss.h \
	$(OBJDIR)/schema_.c:$(OBJDIR)/schema.h \
	$(OBJDIR)/search_.c:$(OBJDIR)/search.h \
	$(OBJDIR)/security_audit_.c:$(OBJDIR)/security_audit.h \
	$(OBJDIR)/setup_.c:$(OBJDIR)/setup.h \
	$(OBJDIR)/setupuser_.c:$(OBJDIR)/setupuser.h \
................................................................................
	$(OBJDIR)/translate $(SRCDIR)/regexp.c >$@

$(OBJDIR)/regexp.o:	$(OBJDIR)/regexp_.c $(OBJDIR)/regexp.h $(SRCDIR)/config.h
	$(XTCC) -o $(OBJDIR)/regexp.o -c $(OBJDIR)/regexp_.c

$(OBJDIR)/regexp.h:	$(OBJDIR)/headers









$(OBJDIR)/report_.c:	$(SRCDIR)/report.c $(OBJDIR)/translate
	$(OBJDIR)/translate $(SRCDIR)/report.c >$@

$(OBJDIR)/report.o:	$(OBJDIR)/report_.c $(OBJDIR)/report.h $(SRCDIR)/config.h
	$(XTCC) -o $(OBJDIR)/report.o -c $(OBJDIR)/report_.c

$(OBJDIR)/report.h:	$(OBJDIR)/headers

      return 0;
    }
    pFirst = pFirst->pNext;
  }
  return 1;
}

/*
** Return TRUE if pFirst is the first token of a static assert.
*/
static int isStaticAssert(Token *pFirst){
  if( (pFirst->nText==13 && strncmp(pFirst->zText, "static_assert", 13)==0)
   || (pFirst->nText==14 && strncmp(pFirst->zText, "_Static_assert", 14)==0)
  ){
    return 1;
  }else{
    return 0;
  }
}

/*
** This routine is called whenever we encounter a ";" or "=".  The stuff
** between pFirst and pLast constitutes either a typedef or a global
** variable definition.  Do the right thing.
*/
static int ProcessDecl(Token *pFirst, Token *pEnd, int flags){
................................................................................
    }
    if( pFirst==0 || !isLocal ){
      return nErr;
    }
  }else if( flags & PS_Method ){
    /* Methods are declared by their class.  Don't declare separately. */
    return nErr;
  }else if( isStaticAssert(pFirst) ){
    return 0;
  }
  isVar =  (flags & (PS_Typedef|PS_Method))==0 && isVariableDef(pFirst,pEnd);
  if( isVar && (flags & (PS_Interface|PS_Export|PS_Local))!=0
  && (flags & PS_Extern)==0 ){
    fprintf(stderr,"%s:%d: Can't define a variable in this context\n",
      zFilename, pFirst->nLine);
    nErr++;

      return 0;
    }
    pFirst = pFirst->pNext;
  }
  return 1;
}














/*
** This routine is called whenever we encounter a ";" or "=".  The stuff
** between pFirst and pLast constitutes either a typedef or a global
** variable definition.  Do the right thing.
*/
static int ProcessDecl(Token *pFirst, Token *pEnd, int flags){
................................................................................
    }
    if( pFirst==0 || !isLocal ){
      return nErr;
    }
  }else if( flags & PS_Method ){
    /* Methods are declared by their class.  Don't declare separately. */
    return nErr;


  }
  isVar =  (flags & (PS_Typedef|PS_Method))==0 && isVariableDef(pFirst,pEnd);
  if( isVar && (flags & (PS_Interface|PS_Export|PS_Local))!=0
  && (flags & PS_Extern)==0 ){
    fprintf(stderr,"%s:%d: Can't define a variable in this context\n",
      zFilename, pFirst->nLine);
    nErr++;

  popen
  pqueue
  printf
  publish
  purge
  rebuild
  regexp
  repolist
  report
  rss
  schema
  search
  security_audit
  setup
  setupuser
................................................................................
  -DSQLITE_OMIT_LOAD_EXTENSION
  -DSQLITE_MAX_EXPR_DEPTH=0
  -DSQLITE_USE_ALLOCA
  -DSQLITE_ENABLE_LOCKING_STYLE=0
  -DSQLITE_DEFAULT_FILE_FORMAT=4
  -DSQLITE_ENABLE_EXPLAIN_COMMENTS
  -DSQLITE_ENABLE_FTS4

  -DSQLITE_ENABLE_DBSTAT_VTAB
  -DSQLITE_ENABLE_JSON1
  -DSQLITE_ENABLE_FTS5
  -DSQLITE_ENABLE_STMTVTAB
  -DSQLITE_HAVE_ZLIB
  -DSQLITE_INTROSPECTION_PRAGMAS
  -DSQLITE_ENABLE_DBPAGE_VTAB
................................................................................
endif

#### The directories where the OpenSSL include and library files are located.
#    The recommended usage here is to use the Sysinternals junction tool
#    to create a hard link between an "openssl-1.x" sub-directory of the
#    Fossil source code directory and the target OpenSSL source directory.
#
OPENSSLDIR = $(SRCDIR)/../compat/openssl-1.0.2q
OPENSSLINCDIR = $(OPENSSLDIR)/include
OPENSSLLIBDIR = $(OPENSSLDIR)

#### Either the directory where the Tcl library is installed or the Tcl
#    source code directory resides (depending on the value of the macro
#    FOSSIL_TCL_SOURCE).  If this points to the Tcl install directory,
#    this directory must have "include" and "lib" sub-directories.  If
................................................................................

# Enable support for the SQLite Encryption Extension?
!ifndef USE_SEE
USE_SEE = 0
!endif

!if $(FOSSIL_ENABLE_SSL)!=0
SSLDIR    = $(B)\compat\openssl-1.0.2q
SSLINCDIR = $(SSLDIR)\inc32
!if $(FOSSIL_DYNAMIC_BUILD)!=0
SSLLIBDIR = $(SSLDIR)\out32dll
!else
SSLLIBDIR = $(SSLDIR)\out32
!endif
SSLLFLAGS = /nologo /opt:ref /debug

  popen
  pqueue
  printf
  publish
  purge
  rebuild
  regexp

  report
  rss
  schema
  search
  security_audit
  setup
  setupuser
................................................................................
  -DSQLITE_OMIT_LOAD_EXTENSION
  -DSQLITE_MAX_EXPR_DEPTH=0
  -DSQLITE_USE_ALLOCA
  -DSQLITE_ENABLE_LOCKING_STYLE=0
  -DSQLITE_DEFAULT_FILE_FORMAT=4
  -DSQLITE_ENABLE_EXPLAIN_COMMENTS
  -DSQLITE_ENABLE_FTS4
  -DSQLITE_ENABLE_FTS3_PARENTHESIS
  -DSQLITE_ENABLE_DBSTAT_VTAB
  -DSQLITE_ENABLE_JSON1
  -DSQLITE_ENABLE_FTS5
  -DSQLITE_ENABLE_STMTVTAB
  -DSQLITE_HAVE_ZLIB
  -DSQLITE_INTROSPECTION_PRAGMAS
  -DSQLITE_ENABLE_DBPAGE_VTAB
................................................................................
endif

#### The directories where the OpenSSL include and library files are located.
#    The recommended usage here is to use the Sysinternals junction tool
#    to create a hard link between an "openssl-1.x" sub-directory of the
#    Fossil source code directory and the target OpenSSL source directory.
#
OPENSSLDIR = $(SRCDIR)/../compat/openssl-1.0.2p
OPENSSLINCDIR = $(OPENSSLDIR)/include
OPENSSLLIBDIR = $(OPENSSLDIR)

#### Either the directory where the Tcl library is installed or the Tcl
#    source code directory resides (depending on the value of the macro
#    FOSSIL_TCL_SOURCE).  If this points to the Tcl install directory,
#    this directory must have "include" and "lib" sub-directories.  If
................................................................................

# Enable support for the SQLite Encryption Extension?
!ifndef USE_SEE
USE_SEE = 0
!endif

!if $(FOSSIL_ENABLE_SSL)!=0
SSLDIR    = $(B)\compat\openssl-1.0.2p
SSLINCDIR = $(SSLDIR)\inc32
!if $(FOSSIL_DYNAMIC_BUILD)!=0
SSLLIBDIR = $(SSLDIR)\out32dll
!else
SSLLIBDIR = $(SSLDIR)\out32
!endif
SSLLFLAGS = /nologo /opt:ref /debug

  }
  db_begin_transaction();
  if( p->type==CFTYPE_MANIFEST ){
    if( permitHooks ){
      zScript = xfer_commit_code();
      zUuid = db_text(0, "SELECT uuid FROM blob WHERE rid=%d", rid);
    }
    if( p->nCherrypick && db_table_exists("repository","cherrypick") ){
      int i;
      for(i=0; i<p->nCherrypick; i++){
        db_multi_exec(
          "REPLACE INTO cherrypick(parentid,childid,isExclude)"
          " SELECT rid, %d, %d FROM blob WHERE uuid=%Q",
          rid, p->aCherrypick[i].zCPTarget[0]=='-',
          p->aCherrypick[i].zCPTarget+1
        );
      }
    }
    if( !db_exists("SELECT 1 FROM mlink WHERE mid=%d", rid) ){
      char *zCom;
      parentid = manifest_add_checkin_linkages(rid,p,p->nParent,p->azParent);
      search_doc_touch('c', rid, 0);
      db_multi_exec(
        "REPLACE INTO event(type,mtime,objid,user,comment,"
                           "bgcolor,euser,ecomment,omtime)"
................................................................................
    char *zFType;
    char *zTitle;
    schema_forum();
    froot = p->zThreadRoot ? uuid_to_rid(p->zThreadRoot, 1) : rid;
    fprev = p->nParent ? uuid_to_rid(p->azParent[0],1) : 0;
    firt = p->zInReplyTo ? uuid_to_rid(p->zInReplyTo,1) : 0;
    db_multi_exec(
      "REPLACE INTO forumpost(fpid,froot,fprev,firt,fmtime)"
      "VALUES(%d,%d,nullif(%d,0),nullif(%d,0),%.17g)",
      p->rid, froot, fprev, firt, p->rDate
    );
    if( firt==0 ){
      /* This is the start of a new thread, either the initial entry
      ** or an edit of the initial entry. */
      zTitle = p->zThreadTitle;

  }
  db_begin_transaction();
  if( p->type==CFTYPE_MANIFEST ){
    if( permitHooks ){
      zScript = xfer_commit_code();
      zUuid = db_text(0, "SELECT uuid FROM blob WHERE rid=%d", rid);
    }











    if( !db_exists("SELECT 1 FROM mlink WHERE mid=%d", rid) ){
      char *zCom;
      parentid = manifest_add_checkin_linkages(rid,p,p->nParent,p->azParent);
      search_doc_touch('c', rid, 0);
      db_multi_exec(
        "REPLACE INTO event(type,mtime,objid,user,comment,"
                           "bgcolor,euser,ecomment,omtime)"
................................................................................
    char *zFType;
    char *zTitle;
    schema_forum();
    froot = p->zThreadRoot ? uuid_to_rid(p->zThreadRoot, 1) : rid;
    fprev = p->nParent ? uuid_to_rid(p->azParent[0],1) : 0;
    firt = p->zInReplyTo ? uuid_to_rid(p->zInReplyTo,1) : 0;
    db_multi_exec(
      "INSERT INTO forumpost(fpid,froot,fprev,firt,fmtime)"
      "VALUES(%d,%d,nullif(%d,0),nullif(%d,0),%.17g)",
      p->rid, froot, fprev, firt, p->rDate
    );
    if( firt==0 ){
      /* This is the start of a new thread, either the initial entry
      ** or an edit of the initial entry. */
      zTitle = p->zThreadTitle;

> 1.  **\[display text\]\(URL\)**
> 2.  **\[display text\]\(URL "Title"\)**
> 3.  **\[display text\]\(URL 'Title'\)**
> 4.  **\<URL\>**
> 5.  **\[display text\]\[label\]**
> 6.  **\[display text\]\[\]**
> 7.  **\[display text\]**

> **URL** may optionally be written **\<URL\>**.  With link formats 5, 6, and 7
> ("reference links"), the URL is supplied elsewhere in the document, as shown
> below.  Link formats 6 and 7 reuse the display text as the label.  Labels are
> case-insensitive.  The title may be split onto the next line with optional
> indenting.

> * **\[label\]:&nbsp;URL**
> * **\[label\]:&nbsp;URL&nbsp;"Title"**
> * **\[label\]:&nbsp;URL&nbsp;'Title'**
> * **\[label\]:&nbsp;URL&nbsp;(Title)**

> 1.  **\[display text\]\(URL\)**
> 2.  **\[display text\]\(URL "Title"\)**
> 3.  **\[display text\]\(URL 'Title'\)**
> 4.  **\<URL\>**
> 5.  **\[display text\]\[label\]**
> 6.  **\[display text\]\[\]**


> **URL** may optionally be written **\<URL\>**.  With link formats 5 and 6
> ("reference links"), the URL is supplied elsewhere in the document, as shown
> below.  Link format 6 reuses the display text as the label.  Labels are
> case-insensitive.  The title may be split onto the next line with optional
> indenting.

> * **\[label\]:&nbsp;URL**
> * **\[label\]:&nbsp;URL&nbsp;"Title"**
> * **\[label\]:&nbsp;URL&nbsp;'Title'**
> * **\[label\]:&nbsp;URL&nbsp;(Title)**

** The makefiles use this utility to package various resources (large scripts,
** GIF images, etc) that are separate files in the source code as byte
** arrays in the resulting executable.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>

/*
** Read the entire content of the file named zFilename into memory obtained
** from malloc() and return a pointer to that memory.  Write the size of the
** file into *pnByte.
*/
static unsigned char *read_file(const char *zFilename, int *pnByte){
................................................................................
  }
  got = fread(z, 1, nByte, in);
  fclose(in);
  z[got] = 0;
  return z;
}

/*
** Try to compress a javascript file by removing unnecessary whitespace.
**
** Warning:  This compression routine does not necessarily work for any
** arbitrary Javascript source file.  But it should work ok for the
** well-behaved source files in this project.
*/
static void compressJavascript(unsigned char *z, int *pn){
  int n = *pn;
  int i, j, k;
  for(i=j=0; i<n; i++){
    unsigned char c = z[i];
    if( c=='/' ){
      if( z[i+1]=='*' ){
        for(k=i+3; k<n && (z[k]!='/' || z[k-1]!='*'); k++){}
        if( k<n ){
          i = k;
          while( i+1<n && isspace(z[i+1]) ) i++;
          continue;
        }
      }else if( z[i+1]=='/' ){
        for(k=i+2; k<n && z[k]!='\n'; k++){}
        i = k;
        while( i+1<n && isspace(z[i+1]) ) i++;
        continue;
      }
    }
    if( c=='\n' ){
      while( j>0 && isspace(z[j-1]) ) j--;
      z[j++] = '\n';
      while( i+1<n && isspace(z[i+1]) ) i++;
      continue;
    }
    z[j++] = c;
  }
  z[j] = 0;
  *pn = j;
}

/*
** There is an instance of the following for each file translated.
*/
typedef struct Resource Resource;
struct Resource {
  char *zName;
  int nByte;
................................................................................
  int j, n;
  Resource *aRes;
  int nRes;
  unsigned char *pData;
  int nErr = 0;
  int nSkip;
  int nPrefix = 0;
  int nName;

  if( argc>3 && strcmp(argv[1],"--prefix")==0 ){
    nPrefix = (int)strlen(argv[2]);
    argc -= 2;
    argv += 2;
  }
  nRes = argc - 1;
................................................................................
    /* Skip initial lines beginning with # */
    nSkip = 0;
    while( pData[nSkip]=='#' ){
      while( pData[nSkip]!=0 && pData[nSkip]!='\n' ){ nSkip++; }
      if( pData[nSkip]=='\n' ) nSkip++;
    }

    /* Compress javascript source files */
    nName = (int)strlen(aRes[i].zName);
    if( nName>3 && strcmp(&aRes[i].zName[nName-3],".js")==0 ){
      int x = sz-nSkip;
      compressJavascript(pData+nSkip, &x);
      sz = x + nSkip;
    }

    aRes[i].nByte = sz - nSkip;
    aRes[i].idx = i;
    printf("/* Content of file %s */\n", aRes[i].zName);
    printf("static const unsigned char bidata%d[%d] = {\n  ",
           i, sz+1-nSkip);
    for(j=nSkip, n=0; j<=sz; j++){
      printf("%3d", pData[j]);

** The makefiles use this utility to package various resources (large scripts,
** GIF images, etc) that are separate files in the source code as byte
** arrays in the resulting executable.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>


/*
** Read the entire content of the file named zFilename into memory obtained
** from malloc() and return a pointer to that memory.  Write the size of the
** file into *pnByte.
*/
static unsigned char *read_file(const char *zFilename, int *pnByte){
................................................................................
  }
  got = fread(z, 1, nByte, in);
  fclose(in);
  z[got] = 0;
  return z;
}








































/*
** There is an instance of the following for each file translated.
*/
typedef struct Resource Resource;
struct Resource {
  char *zName;
  int nByte;
................................................................................
  int j, n;
  Resource *aRes;
  int nRes;
  unsigned char *pData;
  int nErr = 0;
  int nSkip;
  int nPrefix = 0;


  if( argc>3 && strcmp(argv[1],"--prefix")==0 ){
    nPrefix = (int)strlen(argv[2]);
    argc -= 2;
    argv += 2;
  }
  nRes = argc - 1;
................................................................................
    /* Skip initial lines beginning with # */
    nSkip = 0;
    while( pData[nSkip]=='#' ){
      while( pData[nSkip]!=0 && pData[nSkip]!='\n' ){ nSkip++; }
      if( pData[nSkip]=='\n' ) nSkip++;
    }









    aRes[i].nByte = sz - nSkip;
    aRes[i].idx = i;
    printf("/* Content of file %s */\n", aRes[i].zName);
    printf("static const unsigned char bidata%d[%d] = {\n  ",
           i, sz+1-nSkip);
    for(j=nSkip, n=0; j<=sz; j++){
      printf("%3d", pData[j]);

  PathNode *p;
  int i;
  if( path.nStep<2 ) return 0;
  for(p=path.pEnd, i=0; p && i<path.nStep/2; p=p->pFrom, i++){}
  return p;
}

/*
** Return an estimate of the number of comparisons remaining in order
** to bisect path.  This is based on the log2() of path.nStep.
*/
int path_search_depth(void){
  int i, j;
  for(i=0, j=1; j<path.nStep; i++, j+=j){}
  return i;
}

/*
** Compute the shortest path between two check-ins and then transfer
** that path into the "ancestor" table.  This is a utility used by
** both /annotate and /finfo.  See also: compute_direct_ancestors().
*/
void path_shortest_stored_in_ancestor_table(
  int origid,     /* RID for check-in at start of the path */

  PathNode *p;
  int i;
  if( path.nStep<2 ) return 0;
  for(p=path.pEnd, i=0; p && i<path.nStep/2; p=p->pFrom, i++){}
  return p;
}











/*
** Compute the shortest path between two check-ins and then transfer
** that path into the "ancestor" table.  This is a utility used by
** both /annotate and /finfo.  See also: compute_direct_ancestors().
*/
void path_shortest_stored_in_ancestor_table(
  int origid,     /* RID for check-in at start of the path */

      wikiFlags = WIKI_INLINE | WIKI_NOBADLINKS;
    }else{
      wikiFlags = WIKI_INLINE | WIKI_NOBLOCK | WIKI_NOBADLINKS;
    }
    if( db_get_boolean("timeline-plaintext", 0) ){
      wikiFlags |= WIKI_LINKSONLY;
    }
    if( db_get_boolean("timeline-hard-newlines", 0) ){
      wikiFlags |= WIKI_NEWLINE;
    }
  }
  return wikiFlags;
}



/*
................................................................................
  }else{
    out = fossil_fopen(g.zErrlog, "a");
    if( out==0 ) return;
  }
  now = time(0);
  pNow = gmtime(&now);
  fprintf(out, "------------- %04d-%02d-%02d %02d:%02d:%02d UTC ------------\n",
          pNow->tm_year+1900, pNow->tm_mon+1, pNow->tm_mday,
          pNow->tm_hour, pNow->tm_min, pNow->tm_sec);
  va_start(ap, zFormat);
  vfprintf(out, zFormat, ap);
  fprintf(out, "\n");
  va_end(ap);
  for(i=0; i<count(azEnv); i++){
    char *p;

      wikiFlags = WIKI_INLINE | WIKI_NOBADLINKS;
    }else{
      wikiFlags = WIKI_INLINE | WIKI_NOBLOCK | WIKI_NOBADLINKS;
    }
    if( db_get_boolean("timeline-plaintext", 0) ){
      wikiFlags |= WIKI_LINKSONLY;
    }



  }
  return wikiFlags;
}



/*
................................................................................
  }else{
    out = fossil_fopen(g.zErrlog, "a");
    if( out==0 ) return;
  }
  now = time(0);
  pNow = gmtime(&now);
  fprintf(out, "------------- %04d-%02d-%02d %02d:%02d:%02d UTC ------------\n",
          pNow->tm_year+1900, pNow->tm_mon+1, pNow->tm_mday+1,
          pNow->tm_hour, pNow->tm_min, pNow->tm_sec);
  va_start(ap, zFormat);
  vfprintf(out, zFormat, ap);
  fprintf(out, "\n");
  va_end(ap);
  for(i=0; i<count(azEnv); i++){
    char *p;

**   http://www.hwaci.com/drh/
**
*******************************************************************************
**
** This file was adapted from the test_regexp.c file in SQLite3.  That
** file is in the public domain.
**
** See ../www/grep.md for details of the algorithm and RE dialect.



































*/
#include "config.h"
#include "regexp.h"

/* The end-of-input character */
#define RE_EOF            0    /* End of input */

................................................................................
}

/*
** COMMAND: grep
**
** Usage: %fossil grep [OPTIONS] PATTERN FILENAME
**
** Attempt to match the given POSIX extended regular expression PATTERN
** over all historic versions of FILENAME.  For details of the supported
** RE dialect, see https://fossil-scm.org/fossil/doc/trunk/www/grep.md
**
** Options:
**
**     -i|--ignore-case         Ignore case
**     -l|--files-with-matches  List only checkin ID for versions that match
**     -v|--verbose             Show each file as it is analyzed
*/
void re_grep_cmd(void){
  u32 flags = 0;
  int bVerbose = 0;
  ReCompiled *pRe;
  const char *zErr;
................................................................................
  Blob fullName;

  if( find_option("ignore-case","i",0)!=0 ) ignoreCase = 1;
  if( find_option("files-with-matches","l",0)!=0 ) flags |= GREP_EXISTS;
  if( find_option("verbose","v",0)!=0 ) bVerbose = 1;
  db_find_and_open_repository(0, 0);
  verify_all_options();
  if( g.argc<4 ){
    usage("REGEXP FILENAME");
  }
  zErr = re_compile(&pRe, g.argv[2], ignoreCase);
  if( zErr ) fossil_fatal("%s", zErr);

  if( file_tree_name(g.argv[3], &fullName, 0, 0) ){
    int fnid = db_int(0, "SELECT fnid FROM filename WHERE name=%Q",

**   http://www.hwaci.com/drh/
**
*******************************************************************************
**
** This file was adapted from the test_regexp.c file in SQLite3.  That
** file is in the public domain.
**
** The code in this file implements a compact but reasonably
** efficient regular-expression matcher for posix extended regular
** expressions against UTF8 text.  The following syntax is supported:
**
**     X*      zero or more occurrences of X
**     X+      one or more occurrences of X
**     X?      zero or one occurrences of X
**     X{p,q}  between p and q occurrences of X
**     (X)     match X
**     X|Y     X or Y
**     ^X      X occurring at the beginning of the string
**     X$      X occurring at the end of the string
**     .       Match any single character
**     \c      Character c where c is one of \{}()[]|*+?.
**     \c      C-language escapes for c in afnrtv.  ex: \t or \n
**     \uXXXX  Where XXXX is exactly 4 hex digits, unicode value XXXX
**     \xXX    Where XX is exactly 2 hex digits, unicode value XX
**     [abc]   Any single character from the set abc
**     [^abc]  Any single character not in the set abc
**     [a-z]   Any single character in the range a-z
**     [^a-z]  Any single character not in the range a-z
**     \b      Word boundary
**     \w      Word character.  [A-Za-z0-9_]
**     \W      Non-word character
**     \d      Digit
**     \D      Non-digit
**     \s      Whitespace character
**     \S      Non-whitespace character
**
** A nondeterministic finite automaton (NFA) is used for matching, so the
** performance is bounded by O(N*M) where N is the size of the regular
** expression and M is the size of the input string.  The matcher never
** exhibits exponential behavior.  Note that the X{p,q} operator expands
** to p copies of X following by q-p copies of X? and that the size of the
** regular expression in the O(N*M) performance bound is computed after
** this expansion.
*/
#include "config.h"
#include "regexp.h"

/* The end-of-input character */
#define RE_EOF            0    /* End of input */

................................................................................
}

/*
** COMMAND: grep
**
** Usage: %fossil grep [OPTIONS] PATTERN FILENAME
**

** Run grep over all historic version of FILENAME

**
** Options:
**
**     -i|--ignore-case         Ignore case
**     -l|--files-with-matches  Print only filenames that match
**     -v|--verbose             Show each file as it is analyzed
*/
void re_grep_cmd(void){
  u32 flags = 0;
  int bVerbose = 0;
  ReCompiled *pRe;
  const char *zErr;
................................................................................
  Blob fullName;

  if( find_option("ignore-case","i",0)!=0 ) ignoreCase = 1;
  if( find_option("files-with-matches","l",0)!=0 ) flags |= GREP_EXISTS;
  if( find_option("verbose","v",0)!=0 ) bVerbose = 1;
  db_find_and_open_repository(0, 0);
  verify_all_options();
  if( g.argc<3 ){
    usage("REGEXP FILENAME");
  }
  zErr = re_compile(&pRe, g.argv[2], ignoreCase);
  if( zErr ) fossil_fatal("%s", zErr);

  if( file_tree_name(g.argv[3], &fullName, 0, 0) ){
    int fnid = db_int(0, "SELECT fnid FROM filename WHERE name=%Q",

/*
** Copyright (c) 2018 D. Richard Hipp
**
** This program is free software; you can redistribute it and/or
** modify it under the terms of the Simplified BSD License (also
** known as the "2-Clause License" or "FreeBSD License".)
**
** This program is distributed in the hope that it will be useful,
** but without any warranty; without even the implied warranty of
** merchantability or fitness for a particular purpose.
**
** Author contact information:
**   drh@hwaci.com
**   http://www.hwaci.com/drh/
**
*******************************************************************************
**
** This module contains code to implement the repository list page when
** "fossil server" or "fossil ui" is serving a directory full of repositories.
*/
#include "config.h"
#include "repolist.h"

#if INTERFACE
/*
** Return value from the remote_repo_info() command.  zRepoName is the
** input.  All other fields are outputs.
*/
struct RepoInfo {
  char *zRepoName;      /* Name of the repository file */
  int isValid;          /* True if zRepoName is a valid Fossil repository */
  char *zProjName;      /* Project Name.  Memory from fossil_malloc() */
  double rMTime;        /* Last update.  Julian day number */
};
#endif

/*
** Discover information about the repository given by
** pRepo->zRepoName.
*/
void remote_repo_info(RepoInfo *pRepo){
  sqlite3 *db;
  sqlite3_stmt *pStmt;
  int rc;

  pRepo->isValid = 0;
  pRepo->zProjName = 0;
  pRepo->rMTime = 0.0;

  g.dbIgnoreErrors++;
  rc = sqlite3_open(pRepo->zRepoName, &db);
  if( rc ) goto finish_repo_list;
  rc = sqlite3_prepare_v2(db, "SELECT value FROM config"
                              " WHERE name='project-name'",
                          -1, &pStmt, 0);
  if( rc ) goto finish_repo_list;
  if( sqlite3_step(pStmt)==SQLITE_ROW ){
    pRepo->zProjName = fossil_strdup((char*)sqlite3_column_text(pStmt,0));
  }
  sqlite3_finalize(pStmt);
  rc = sqlite3_prepare_v2(db, "SELECT max(mtime) FROM event", -1, &pStmt, 0);
  if( rc==SQLITE_OK && sqlite3_step(pStmt)==SQLITE_ROW ){
    pRepo->rMTime = sqlite3_column_double(pStmt,0);
  }
  pRepo->isValid = 1;
  sqlite3_finalize(pStmt);
finish_repo_list:
  g.dbIgnoreErrors--;
  sqlite3_close(db);
}

/*
** Generate a web-page that lists all repositories located under the
** g.zRepositoryName directory and return non-zero.
**
** For the special case when g.zRepositoryName is a non-chroot-jail "/",
** compose the list using the "repo:" entries in the global_config
** table of the configuration database.  These entries comprise all
** of the repositories known to the "all" command.  The special case
** processing is disallowed for chroot jails because g.zRepositoryName
** is always "/" inside a chroot jail and so it cannot be used as a flag
** to signal the special processing in that case.  The special case
** processing is intended for the "fossil all ui" command which never
** runs in a chroot jail anyhow.
**
** Or, if no repositories can be located beneath g.zRepositoryName,
** return 0.
*/
int repo_list_page(void){
  Blob base;
  int n = 0;
  int allRepo;

  assert( g.db==0 );
  if( fossil_strcmp(g.zRepositoryName,"/")==0 && !g.fJail ){
    /* For the special case of the "repository directory" being "/",
    ** show all of the repositories named in the ~/.fossil database.
    **
    ** On unix systems, then entries are of the form "repo:/home/..."
    ** and on Windows systems they are like on unix, starting with a "/"
    ** or they can begin with a drive letter: "repo:C:/Users/...".  In either
    ** case, we want returned path to omit any initial "/".
    */
    db_open_config(1, 0);
    db_multi_exec(
       "CREATE TEMP VIEW sfile AS"
       "  SELECT ltrim(substr(name,6),'/') AS 'pathname' FROM global_config"
       "   WHERE name GLOB 'repo:*'"
    );
    allRepo = 1;
  }else{
    /* The default case:  All repositories under the g.zRepositoryName
    ** directory.
    */
    blob_init(&base, g.zRepositoryName, -1);
    sqlite3_open(":memory:", &g.db);
    db_multi_exec("CREATE TABLE sfile(pathname TEXT);");
    db_multi_exec("CREATE TABLE vfile(pathname);");
    vfile_scan(&base, blob_size(&base), 0, 0, 0);
    db_multi_exec("DELETE FROM sfile WHERE pathname NOT GLOB '*[^/].fossil'");
    allRepo = 0;
  }
  @ <html>
  @ <head>
  @ <base href="%s(g.zBaseURL)/" />
  @ <meta name="viewport" content="width=device-width, initial-scale=1.0">
  @ <title>Repository List</title>
  @ </head>
  @ <body>
  n = db_int(0, "SELECT count(*) FROM sfile");
  if( n>0 ){
    Stmt q;
    double rNow;
    @ <h1 align="center">Fossil Repositories</h1>
    @ <table border="0" class="sortable" data-init-sort="1" \
    @ data-column-types="tntnk"><thead>
    @ <tr><th>Filename<th width="20">\
    @ <th>Project Name<th width="20">\
    @ <th>Last Modified</tr>
    @ </thead><tbody>
    db_prepare(&q, "SELECT pathname"
                   " FROM sfile ORDER BY pathname COLLATE nocase;");
    rNow = db_double(0, "SELECT julianday('now')");
    while( db_step(&q)==SQLITE_ROW ){
      const char *zName = db_column_text(&q, 0);
      int nName = (int)strlen(zName);
      char *zUrl;
      char *zAge;
      char *zFull;
      RepoInfo x;
      int iAge;
      if( nName<7 ) continue;
      zUrl = sqlite3_mprintf("%.*s", nName-7, zName);
      if( zName[0]=='/'
#ifdef _WIN32
          || sqlite3_strglob("[a-zA-Z]:/*", zName)==0
#endif
      ){
        zFull = mprintf("%s", zName);
      }else if ( allRepo ){
        zFull = mprintf("/%s", zName);
      }else{
        zFull = mprintf("%s/%s", g.zRepositoryName, zName);
      }
      x.zRepoName = zFull;
      remote_repo_info(&x);
      fossil_free(zFull);
      if( !x.isValid ){
        zAge = mprintf("...");
        iAge = 0;
      }else{
        iAge = (rNow - x.rMTime)*86400;
        if( iAge<0 ) x.rMTime = rNow;
        zAge = human_readable_age(rNow - x.rMTime);
      }
      @ <tr><td valign="top">\
      if( sqlite3_strglob("*.fossil", zName)!=0 ){
        /* The "fossil server DIRECTORY" and "fossil ui DIRECTORY" commands
        ** do not work for repositories whose names do not end in ".fossil".
        ** So do not hyperlink those cases. */
        @ %h(zName)
      } else if( sqlite3_strglob("*/.*", zName)==0 ){
        /* Do not show hidden repos */
        @ %h(zName) (hidden)
      } else if( allRepo && sqlite3_strglob("[a-zA-Z]:/?*", zName)!=0 ){
        @ <a href="%R/%T(zUrl)/home" target="_blank">/%h(zName)</a>
      }else{
        @ <a href="%R/%T(zUrl)/home" target="_blank">%h(zName)</a>
      }
      if( x.zProjName ){
        @ <td></td><td>%h(x.zProjName)</td>
        fossil_free(x.zProjName);
      }else{
        @ <td></td><td></td>
      }
      @ <td></td><td data-sortkey='%08x(iAge)'>%h(zAge)</tr>
      fossil_free(zAge);
      sqlite3_free(zUrl);
    }
    @ </tbody></table>
  }else{
    @ <h1>No Repositories Found</h1>
  }
  @ <script>%s(builtin_text("sorttable.js"))</script>
  @ </body>
  @ </html>
  cgi_reply();
  sqlite3_close(g.db);
  g.db = 0;
  return n;
}

/*
** COMMAND: test-list-page
**
** Usage: %fossil test-list-page DIRECTORY
**
** Show all repositories underneath DIRECTORY.  Or if DIRECTORY is "/"
** show all repositories in the ~/.fossil file.
*/
void test_list_page(void){
  if( g.argc<3 ){
    g.zRepositoryName = "/";
  }else{
    g.zRepositoryName = g.argv[2];
  }
  g.httpOut = stdout;
  repo_list_page();
}

@   -- Add as many fields as required below this line
@   login TEXT,
@   username TEXT,
@   mimetype TEXT,
@   icomment TEXT
@ );
@ CREATE INDEX ticketchng_idx1 ON ticketchng(tkt_id, tkt_mtime);
@
@ -- For tracking cherrypick merges
@ CREATE TABLE cherrypick(
@   parentid INT,
@   childid INT,
@   isExclude BOOLEAN DEFAULT false,
@   PRIMARY KEY(parentid, childid)
@ ) WITHOUT ROWID;
@ CREATE INDEX cherrypick_cid ON cherrypick(childid);
;

/*
** Predefined tagid values
*/
#if INTERFACE
# define TAG_BGCOLOR    1     /* Set the background color for display */

@   -- Add as many fields as required below this line
@   login TEXT,
@   username TEXT,
@   mimetype TEXT,
@   icomment TEXT
@ );
@ CREATE INDEX ticketchng_idx1 ON ticketchng(tkt_id, tkt_mtime);









;

/*
** Predefined tagid values
*/
#if INTERFACE
# define TAG_BGCOLOR    1     /* Set the background color for display */

**
** Run a security audit of the current Fossil setup.
** This page requires administrator access
*/
void secaudit0_page(void){
  const char *zAnonCap;      /* Capabilities of user "anonymous" and "nobody" */
  const char *zPubPages;     /* GLOB pattern for public pages */
  const char *zSelfCap;      /* Capabilities of self-registered users */
  char *z;
  int n;

  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("Security Audit");
  @ <ol>

  /* Step 1:  Determine if the repository is public or private.  "Public"
  ** means that any anonymous user on the internet can access all content.
  ** "Private" repos require (non-anonymous) login to access all content,
  ** though some content may be accessible anonymously.
  */
  zAnonCap = db_text("", "SELECT fullcap(NULL)");
  zPubPages = db_get("public-pages",0);
  if( db_get_boolean("self-register",0) ){
    CapabilityString *pCap;
    pCap = capability_add(0, db_get("default-perms",""));
    capability_expand(pCap);
    zSelfCap = capability_string(pCap);
    capability_free(pCap);
  }else{
    zSelfCap = fossil_strdup("");
  }
  if( hasAnyCap(zAnonCap,"as") ){
    @ <li><p>This repository is <big><b>Wildly INSECURE</b></big> because
    @ it grants administrator privileges to anonymous users.  You
    @ should <a href="takeitprivate">take this repository private</a>
    @ immediately!  Or, at least remove the Setup and Admin privileges
    @ for users "anonymous" and "login" on the
    @ <a href="setup_ulist">User Configuration</a> page.
  }else if( hasAnyCap(zSelfCap,"as") ){
    @ <li><p>This repository is <big><b>Wildly INSECURE</b></big> because
    @ it grants administrator privileges to self-registered users.  You
    @ should <a href="takeitprivate">take this repository private</a>
    @ and/or disable self-registration
    @ immediately!  Or, at least remove the Setup and Admin privileges
    @ from the default permissions for new users.
  }else if( hasAnyCap(zAnonCap,"y") ){
    @ <li><p>This repository is <big><b>INSECURE</b></big> because
    @ it allows anonymous users to push unversioned files.
    @ <p>Fix this by <a href="takeitprivate">taking the repository private</a>
    @ or by removing the "y" permission from users "anonymous" and
    @ "nobody" on the <a href="setup_ulist">User Configuration</a> page.
  }else if( hasAnyCap(zSelfCap,"y") ){
    @ <li><p>This repository is <big><b>INSECURE</b></big> because
    @ it allows self-registered users to push unversioned files.
    @ <p>Fix this by <a href="takeitprivate">taking the repository private</a>
    @ or by removing the "y" permission from the default permissions or
    @ by disabling self-registration.
  }else if( hasAnyCap(zAnonCap,"goz") ){
    @ <li><p>This repository is <big><b>PUBLIC</b></big>. All
    @ checked-in content can be accessed by anonymous users.
    @ <a href="takeitprivate">Take it private</a>.<p>
  }else if( hasAnyCap(zSelfCap,"goz") ){
    @ <li><p>This repository is <big><b>PUBLIC</b></big> because all
    @ checked-in content can be accessed by self-registered users.
    @ This repostory would be private if you disabled self-registration.</p>
  }else if( !hasAnyCap(zAnonCap, "jrwy234567")
         && !hasAnyCap(zSelfCap, "jrwy234567")
         && (zPubPages==0 || zPubPages[0]==0) ){
    @ <li><p>This repository is <big><b>Completely PRIVATE</b></big>.
    @ A valid login and password is required to access any content.
  }else{
    @ <li><p>This repository is <big><b>Mostly PRIVATE</b></big>.
    @ A valid login and password is usually required, however some
    @ content can be accessed either anonymously or by self-registered
    @ users:
    @ <ul>
    if( hasAnyCap(zAnonCap,"j") || hasAnyCap(zSelfCap,"j") ){
      @ <li> Wiki pages
    }
    if( hasAnyCap(zAnonCap,"r") || hasAnyCap(zSelfCap,"r") ){
      @ <li> Tickets
    }
    if( hasAnyCap(zAnonCap,"234567") || hasAnyCap(zSelfCap,"234567") ){
      @ <li> Forum posts
    }
    if( zPubPages && zPubPages[0] ){
      Glob *pGlob = glob_create(zPubPages);
      int i;
      @ <li> URLs that match any of these GLOB patterns:
      @ <ul>
................................................................................
/*
** WEBPAGE: takeitprivate
**
** Disable anonymous access to this website
*/
void takeitprivate_page(void){
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }
  if( P("cancel") ){
    /* User pressed the cancel button.  Go back */
    cgi_redirect("secaudit0");
  }
  if( P("apply") ){
    db_multi_exec(
      "UPDATE user SET cap=''"
      " WHERE login IN ('nobody','anonymous');"
      "DELETE FROM config WHERE name='public-pages';"
    );
    db_set("self-register","0",0);
    cgi_redirect("secaudit0");
  }
  style_header("Make This Website Private");
  @ <p>Click the "Make It Private" button below to disable all
  @ anonymous access to this repository.  A valid login and password
  @ will be required to access this repository after clicking that
  @ button.</p>
................................................................................
** this page.
*/
void errorlog_page(void){
  i64 szFile;
  FILE *in;
  char z[10000];
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("Server Error Log");
  style_submenu_element("Test", "%R/test-warning");
  style_submenu_element("Refresh", "%R/errorlog");
  if( g.zErrlog==0 || fossil_strcmp(g.zErrlog,"-")==0 ){

**
** Run a security audit of the current Fossil setup.
** This page requires administrator access
*/
void secaudit0_page(void){
  const char *zAnonCap;      /* Capabilities of user "anonymous" and "nobody" */
  const char *zPubPages;     /* GLOB pattern for public pages */

  char *z;
  int n;

  login_check_credentials();
  if( !g.perm.Setup && !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("Security Audit");
  @ <ol>

  /* Step 1:  Determine if the repository is public or private.  "Public"
  ** means that any anonymous user on the internet can access all content.
  ** "Private" repos require (non-anonymous) login to access all content,
  ** though some content may be accessible anonymously.
  */
  zAnonCap = db_text("", "SELECT fullcap(NULL)");
  zPubPages = db_get("public-pages",0);









  if( hasAnyCap(zAnonCap,"as") ){
    @ <li><p>This repository is <big><b>Wildly INSECURE</b></big> because
    @ it grants administrator privileges to anonymous users.  You
    @ should <a href="takeitprivate">take this repository private</a>
    @ immediately!  Or, at least remove the Setup and Admin privileges
    @ for users "anonymous" and "login" on the
    @ <a href="setup_ulist">User Configuration</a> page.







  }else if( hasAnyCap(zAnonCap,"y") ){
    @ <li><p>This repository is <big><b>INSECURE</b></big> because
    @ it allows anonymous users to push unversioned files.
    @ <p>Fix this by <a href="takeitprivate">taking the repository private</a>
    @ or by removing the "y" permission from users "anonymous" and
    @ "nobody" on the <a href="setup_ulist">User Configuration</a> page.






  }else if( hasAnyCap(zAnonCap,"goz") ){
    @ <li><p>This repository is <big><b>PUBLIC</b></big>. All
    @ checked-in content can be accessed by anonymous users.
    @ <a href="takeitprivate">Take it private</a>.<p>




  }else if( !hasAnyCap(zAnonCap, "jrwy234567")

         && (zPubPages==0 || zPubPages[0]==0) ){
    @ <li><p>This repository is <big><b>Completely PRIVATE</b></big>.
    @ A valid login and password is required to access any content.
  }else{
    @ <li><p>This repository is <big><b>Mostly PRIVATE</b></big>.
    @ A valid login and password is usually required, however some
    @ content can be accessed anonymously:

    @ <ul>
    if( hasAnyCap(zAnonCap,"j") ){
      @ <li> Wiki pages
    }
    if( hasAnyCap(zAnonCap,"r") ){
      @ <li> Tickets
    }
    if( hasAnyCap(zAnonCap,"234567") ){
      @ <li> Forum posts
    }
    if( zPubPages && zPubPages[0] ){
      Glob *pGlob = glob_create(zPubPages);
      int i;
      @ <li> URLs that match any of these GLOB patterns:
      @ <ul>
................................................................................
/*
** WEBPAGE: takeitprivate
**
** Disable anonymous access to this website
*/
void takeitprivate_page(void){
  login_check_credentials();
  if( !g.perm.Setup && !g.perm.Admin ){
    login_needed(0);
    return;
  }
  if( P("cancel") ){
    /* User pressed the cancel button.  Go back */
    cgi_redirect("secaudit0");
  }
  if( P("apply") ){
    db_multi_exec(
      "UPDATE user SET cap=''"
      " WHERE login IN ('nobody','anonymous');"
      "DELETE FROM config WHERE name='public-pages';"
    );

    cgi_redirect("secaudit0");
  }
  style_header("Make This Website Private");
  @ <p>Click the "Make It Private" button below to disable all
  @ anonymous access to this repository.  A valid login and password
  @ will be required to access this repository after clicking that
  @ button.</p>
................................................................................
** this page.
*/
void errorlog_page(void){
  i64 szFile;
  FILE *in;
  char z[10000];
  login_check_credentials();
  if( !g.perm.Setup && !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("Server Error Log");
  style_submenu_element("Test", "%R/test-warning");
  style_submenu_element("Refresh", "%R/errorlog");
  if( g.zErrlog==0 || fossil_strcmp(g.zErrlog,"-")==0 ){

}



/*
** WEBPAGE: setup
**
** Main menu for the administrative pages.  Requires Admin or Setup
** privileges.  Links to sub-pages only usable by Setup users are
** shown only to Setup users.
*/
void setup_page(void){
  int setup_user = 0;
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
  }
  setup_user = g.perm.Setup;

  style_header("Server Administration");

  /* Make sure the header contains <base href="...">.   Issue a warning
  ** if it does not. */
  if( !cgi_header_contains("<base href=") ){
    @ <p class="generalError"><b>Configuration Error:</b> Please add
................................................................................
    @ by SQLite will be poorly seeded.</p>
  }
#endif

  @ <table border="0" cellspacing="3">
  setup_menu_entry("Users", "setup_ulist",
    "Grant privileges to individual users.");
  if( setup_user ){
    setup_menu_entry("Access", "setup_access",
      "Control access settings.");
    setup_menu_entry("Configuration", "setup_config",
      "Configure the WWW components of the repository");
  }
  setup_menu_entry("Security-Audit", "secaudit0",
    "Analyze the current configuration for security problems");
  if( setup_user ){
    setup_menu_entry("Settings", "setup_settings",
      "Web interface to the \"fossil settings\" command");
  }
  setup_menu_entry("Timeline", "setup_timeline",
    "Timeline display preferences");
  if( setup_user ){
    setup_menu_entry("Login-Group", "setup_login_group",
      "Manage single sign-on between this repository and others"
      " on the same server");
    setup_menu_entry("Tickets", "tktsetup",
      "Configure the trouble-ticketing system for this repository");
    setup_menu_entry("Wiki", "setup_wiki",
      "Configure the wiki for this repository");
  }
  setup_menu_entry("Search","srchsetup",
    "Configure the built-in search engine");
  setup_menu_entry("URL Aliases", "waliassetup",
    "Configure URL aliases");
  if( setup_user ){
    setup_menu_entry("Notification", "setup_notification",
      "Automatic notifications of changes via outbound email");
    setup_menu_entry("Email-Server", "setup_smtp",
      "Activate and configure the built-in email server");
    setup_menu_entry("Transfers", "xfersetup",
      "Configure the transfer system for this repository");
  }
  setup_menu_entry("Skins", "setup_skin",
    "Select and/or modify the web interface \"skins\"");
  setup_menu_entry("Moderation", "setup_modreq",
    "Enable/Disable requiring moderator approval of Wiki and/or Ticket"
    " changes and attachments.");
  setup_menu_entry("Ad-Unit", "setup_adunit",
    "Edit HTML text for an ad unit inserted after the menu bar");
  setup_menu_entry("URLs & Checkouts", "urllist",
    "Show URLs used to access this repo and known check-outs");
  if( setup_user ){
    setup_menu_entry("Web-Cache", "cachestat",
      "View the status of the expensive-page cache");
  }
  setup_menu_entry("Logo", "setup_logo",
    "Change the logo and background images for the server");
  setup_menu_entry("Shunned", "shun",
    "Show artifacts that are shunned by this repository");
  setup_menu_entry("Artifact Receipts Log", "rcvfromlist",
    "A record of received artifacts and their sources");
  setup_menu_entry("User Log", "access_log",
................................................................................
    "View the Fossil server error log");
  setup_menu_entry("Unversioned Files", "uvlist?byage=1",
    "Show all unversioned files held");
  setup_menu_entry("Stats", "stat",
    "Repository Status Reports");
  setup_menu_entry("Sitemap", "sitemap",
    "Links to miscellaneous pages");
  if( setup_user ){
    setup_menu_entry("SQL", "admin_sql",
      "Enter raw SQL commands");
    setup_menu_entry("TH1", "admin_th1",
      "Enter raw TH1 commands");
  }
  @ </table>

  style_footer();
}

/*
** Generate a checkbox for an attribute.
................................................................................
  @ </select> <b>%h(zLabel)</b>
}


/*
** WEBPAGE: setup_access
**
** The access-control settings page.  Requires Setup privileges.
*/
void setup_access(void){
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
    return;
  }
................................................................................
      "0", "HH:MM",
      "1", "HH:MM:SS",
      "2", "YYYY-MM-DD HH:MM",
      "3", "YYMMDD HH:MM",
      "4", "(off)"
  };
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }

  style_header("Timeline Display Preferences");
  db_begin_transaction();
  @ <form action="%s(g.zTop)/setup_timeline" method="post"><div>
................................................................................
                  "timeline-plaintext", "tpt", 0, 0);
  @ <p>In timeline displays, check-in comments are displayed literally,
  @ without any wiki or HTML interpretation.  Use CSS to change
  @ display formatting features such as fonts and line-wrapping behavior.
  @ (Property: "timeline-plaintext")</p>

  @ <hr />
  onoff_attribute("Truncate comment at first blank line (Git-style)",
                  "timeline-truncate-at-blank", "ttb", 0, 0);
  @ <p>In timeline displays, check-in comments are displayed only through
  @ the first blank line.  This is the traditional way to display comments
  @ in Git repositories (Property: "timeline-truncate-at-blank")</p>

  @ <hr />
  onoff_attribute("Break comments at newline characters",
                  "timeline-hard-newlines", "thnl", 0, 0);
  @ <p>In timeline displays, newline characters in check-in comments force
  @ a line break on the display.
  @ (Property: "timeline-hard-newlines")</p>

  @ <hr />
  onoff_attribute("Use Universal Coordinated Time (UTC)",
                  "timeline-utc", "utc", 1, 0);
  @ <p>Show times as UTC (also sometimes called Greenwich Mean Time (GMT) or
  @ Zulu) instead of in local time.  On this server, local time is currently
  tmDiff = db_double(0.0, "SELECT julianday('now')");
................................................................................
  style_footer();
}

/*
** WEBPAGE: setup_settings
**
** Change or view miscellaneous settings.  Part of the
** /setup pages requiring Setup privileges.
*/
void setup_settings(void){
  int nSetting;
  int i;
  Setting const *pSet;
  const Setting *aSetting = setting_info(&nSetting);

................................................................................
  db_end_transaction(0);
  style_footer();
}

/*
** WEBPAGE: setup_config
**
** The "Admin/Configuration" page.  Requires Setup privilege.
*/
void setup_config(void){
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
    return;
  }
................................................................................
  @ <p>The <a href='%R/download'>/download</a> page is designed to provide 
  @ a convenient place for newbies
  @ to download a ZIP archive or a tarball of the project.  By default,
  @ the latest trunk check-in is downloaded.  Change this tag to something
  @ else (ex: release) to alter the behavior of the /download page.
  @ (Property: "download-tag")
  @ </p>







  @ <hr />
  entry_attribute("Index Page", 60, "index-page", "idxpg", "/home", 0);
  @ <p>Enter the pathname of the page to display when the "Home" menu
  @ option is selected and when no pathname is
  @ specified in the URL.  For example, if you visit the url:</p>
  @
  @ <blockquote><p>%h(g.zBaseURL)</p></blockquote>
................................................................................
  entry_attribute("License", 40, "sitemap-license", "smlicense",
                  "", 0);
  @ (Property: sitemap-license)<br>
  entry_attribute("Contact", 40, "sitemap-contact", "smcontact",
                  "", 0);
  @ (Property: sitemap-contact)
  @ <hr />
  @ <p><input type="submit"  name="submit" value="Apply Changes" /></p>
  @ </div></form>
  db_end_transaction(0);
  style_footer();
}

/*
** WEBPAGE: setup_wiki
**
** The "Admin/Wiki" page.  Requires Setup privilege.
*/
void setup_wiki(void){
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
    return;
  }

  style_header("Wiki Configuration");
  db_begin_transaction();
  @ <form action="%s(g.zTop)/setup_wiki" method="post"><div>
  login_insert_csrf_secret();
  @ <input type="submit"  name="submit" value="Apply Changes" /></p>
  @ <hr />
  onoff_attribute("Associate Wiki Pages With Branches, Tags, or Checkins",
                  "wiki-about", "wiki-about", 1, 0);
  @ <p>
  @ Associate wiki pages with branches, tags, or checkins, based on
  @ the wiki page name.  Wiki pages that begin with "branch/", "checkin/"
  @ or "tag/" and which continue with the name of an existing branch, checkin
  @ or tag are treated specially when this feature is enabled.
  @ <ul>
  @ <li> <b>branch/</b><i>branch-name</i>
  @ <li> <b>checkin/</b><i>full-checkin-hash</i>
  @ <li> <b>tag/</b><i>tag-name</i>
  @ </ul>
  @ (Property: "wiki-about")</p>
  @ <hr />
  onoff_attribute("Enable WYSIWYG Wiki Editing",
                  "wysiwyg-wiki", "wysiwyg-wiki", 0, 0);
  @ <p>Enable what-you-see-is-what-you-get (WYSIWYG) editing of wiki pages.
  @ The WYSIWYG editor generates HTML instead of markup, which makes
  @ subsequent manual editing more difficult.
  @ (Property: "wysiwyg-wiki")</p>
  @ <hr />
  onoff_attribute("Use HTML as wiki markup language",
    "wiki-use-html", "wiki-use-html", 0, 0);
  @ <p>Use HTML as the wiki markup language. Wiki links will still be parsed
  @ but all other wiki formatting will be ignored. This option is helpful
  @ if you have chosen to use a rich HTML editor for wiki markup such as
  @ TinyMCE.</p>
  @ <p><strong>CAUTION:</strong> when
................................................................................
/*
** WEBPAGE: setup_modreq
**
** Admin page for setting up moderation of tickets and wiki.
*/
void setup_modreq(void){
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }

  style_header("Moderator For Wiki And Tickets");
  db_begin_transaction();
  @ <form action="%R/setup_modreq" method="post"><div>
................................................................................
** WEBPAGE: setup_adunit
**
** Administrative page for configuring and controlling ad units
** and how they are displayed.
*/
void setup_adunit(void){
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }
  db_begin_transaction();
  if( P("clear")!=0 && cgi_csrf_safe(1) ){
    db_multi_exec("DELETE FROM config WHERE name GLOB 'adunit*'");
    cgi_replace_parameter("adunit","");
................................................................................
  if( szLogoImg>0 ){
    zLogoMime = PD("logoim:mimetype","image/gif");
  }
  if( szBgImg>0 ){
    zBgMime = PD("bgim:mimetype","image/gif");
  }
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }
  db_begin_transaction();
  if( !cgi_csrf_safe(1) ){
    /* Allow no state changes if not safe from CSRF */
  }else if( P("setlogo")!=0 && zLogoMime && zLogoMime[0] && szLogoImg>0 ){
................................................................................
}


/*
** WEBPAGE: admin_sql
**
** Run raw SQL commands against the database file using the web interface.
** Requires Setup privileges.
*/
void sql_page(void){
  const char *zQ;
  int go = P("go")!=0;
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
................................................................................
void page_admin_log(){
  Stmt stLog;
  int limit;                 /* How many entries to show */
  int ofst;                  /* Offset to the first entry */
  int fLogEnabled;
  int counter = 0;
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("Admin Log");
  create_admin_log_table();
  limit = atoi(PD("n","200"));
  ofst = atoi(PD("x","0"));
................................................................................
/*
** WEBPAGE: srchsetup
**
** Configure the search engine.  Requires Admin privilege.
*/
void page_srchsetup(){
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("Search Configuration");
  @ <form action="%s(g.zTop)/srchsetup" method="post"><div>
  login_insert_csrf_secret();
  @ <div style="text-align:center;font-weight:bold;">
................................................................................
** Configure the URL aliases
*/
void page_waliassetup(){
  Stmt q;
  int cnt = 0;
  Blob namelist;
  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("URL Alias Configuration");
  if( P("submit")!=0 ){
    Blob token;
    Blob sql;

}



/*
** WEBPAGE: setup
**
** Main menu for the administrative pages.  Requires Admin privileges.


*/
void setup_page(void){

  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
  }


  style_header("Server Administration");

  /* Make sure the header contains <base href="...">.   Issue a warning
  ** if it does not. */
  if( !cgi_header_contains("<base href=") ){
    @ <p class="generalError"><b>Configuration Error:</b> Please add
................................................................................
    @ by SQLite will be poorly seeded.</p>
  }
#endif

  @ <table border="0" cellspacing="3">
  setup_menu_entry("Users", "setup_ulist",
    "Grant privileges to individual users.");

  setup_menu_entry("Access", "setup_access",
    "Control access settings.");
  setup_menu_entry("Configuration", "setup_config",
    "Configure the WWW components of the repository");

  setup_menu_entry("Security-Audit", "secaudit0",
    "Analyze the current configuration for security problems");

  setup_menu_entry("Settings", "setup_settings",
    "Web interface to the \"fossil settings\" command");

  setup_menu_entry("Timeline", "setup_timeline",
    "Timeline display preferences");

  setup_menu_entry("Login-Group", "setup_login_group",
    "Manage single sign-on between this repository and others"
    " on the same server");
  setup_menu_entry("Tickets", "tktsetup",
    "Configure the trouble-ticketing system for this repository");



  setup_menu_entry("Search","srchsetup",
    "Configure the built-in search engine");
  setup_menu_entry("URL Aliases", "waliassetup",
    "Configure URL aliases");

  setup_menu_entry("Notification", "setup_notification",
    "Automatic notifications of changes via outbound email");
  setup_menu_entry("Email-Server", "setup_smtp",
    "Activate and configure the built-in email server");
  setup_menu_entry("Transfers", "xfersetup",
    "Configure the transfer system for this repository");

  setup_menu_entry("Skins", "setup_skin",
    "Select and/or modify the web interface \"skins\"");
  setup_menu_entry("Moderation", "setup_modreq",
    "Enable/Disable requiring moderator approval of Wiki and/or Ticket"
    " changes and attachments.");
  setup_menu_entry("Ad-Unit", "setup_adunit",
    "Edit HTML text for an ad unit inserted after the menu bar");
  setup_menu_entry("URLs & Checkouts", "urllist",
    "Show URLs used to access this repo and known check-outs");

  setup_menu_entry("Web-Cache", "cachestat",
    "View the status of the expensive-page cache");

  setup_menu_entry("Logo", "setup_logo",
    "Change the logo and background images for the server");
  setup_menu_entry("Shunned", "shun",
    "Show artifacts that are shunned by this repository");
  setup_menu_entry("Artifact Receipts Log", "rcvfromlist",
    "A record of received artifacts and their sources");
  setup_menu_entry("User Log", "access_log",
................................................................................
    "View the Fossil server error log");
  setup_menu_entry("Unversioned Files", "uvlist?byage=1",
    "Show all unversioned files held");
  setup_menu_entry("Stats", "stat",
    "Repository Status Reports");
  setup_menu_entry("Sitemap", "sitemap",
    "Links to miscellaneous pages");

  setup_menu_entry("SQL", "admin_sql",
    "Enter raw SQL commands");
  setup_menu_entry("TH1", "admin_th1",
    "Enter raw TH1 commands");

  @ </table>

  style_footer();
}

/*
** Generate a checkbox for an attribute.
................................................................................
  @ </select> <b>%h(zLabel)</b>
}


/*
** WEBPAGE: setup_access
**
** The access-control settings page.  Requires Admin privileges.
*/
void setup_access(void){
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
    return;
  }
................................................................................
      "0", "HH:MM",
      "1", "HH:MM:SS",
      "2", "YYYY-MM-DD HH:MM",
      "3", "YYMMDD HH:MM",
      "4", "(off)"
  };
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
    return;
  }

  style_header("Timeline Display Preferences");
  db_begin_transaction();
  @ <form action="%s(g.zTop)/setup_timeline" method="post"><div>
................................................................................
                  "timeline-plaintext", "tpt", 0, 0);
  @ <p>In timeline displays, check-in comments are displayed literally,
  @ without any wiki or HTML interpretation.  Use CSS to change
  @ display formatting features such as fonts and line-wrapping behavior.
  @ (Property: "timeline-plaintext")</p>

  @ <hr />
  onoff_attribute("Truncate comment at first blank line",
                  "timeline-truncate-at-blank", "ttb", 0, 0);
  @ <p>In timeline displays, check-in comments are displayed only through

  @ the first blank line. (Property: "timeline-truncate-at-blank")</p>








  @ <hr />
  onoff_attribute("Use Universal Coordinated Time (UTC)",
                  "timeline-utc", "utc", 1, 0);
  @ <p>Show times as UTC (also sometimes called Greenwich Mean Time (GMT) or
  @ Zulu) instead of in local time.  On this server, local time is currently
  tmDiff = db_double(0.0, "SELECT julianday('now')");
................................................................................
  style_footer();
}

/*
** WEBPAGE: setup_settings
**
** Change or view miscellaneous settings.  Part of the
** Admin pages requiring Admin privileges.
*/
void setup_settings(void){
  int nSetting;
  int i;
  Setting const *pSet;
  const Setting *aSetting = setting_info(&nSetting);

................................................................................
  db_end_transaction(0);
  style_footer();
}

/*
** WEBPAGE: setup_config
**
** The "Admin/Configuration" page.  Requires Admin privilege.
*/
void setup_config(void){
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
    return;
  }
................................................................................
  @ <p>The <a href='%R/download'>/download</a> page is designed to provide 
  @ a convenient place for newbies
  @ to download a ZIP archive or a tarball of the project.  By default,
  @ the latest trunk check-in is downloaded.  Change this tag to something
  @ else (ex: release) to alter the behavior of the /download page.
  @ (Property: "download-tag")
  @ </p>
  @ <hr />
  onoff_attribute("Enable WYSIWYG Wiki Editing",
                  "wysiwyg-wiki", "wysiwyg-wiki", 0, 0);
  @ <p>Enable what-you-see-is-what-you-get (WYSIWYG) editing of wiki pages.
  @ The WYSIWYG editor generates HTML instead of markup, which makes
  @ subsequent manual editing more difficult.
  @ (Property: "wysiwyg-wiki")</p>
  @ <hr />
  entry_attribute("Index Page", 60, "index-page", "idxpg", "/home", 0);
  @ <p>Enter the pathname of the page to display when the "Home" menu
  @ option is selected and when no pathname is
  @ specified in the URL.  For example, if you visit the url:</p>
  @
  @ <blockquote><p>%h(g.zBaseURL)</p></blockquote>
................................................................................
  entry_attribute("License", 40, "sitemap-license", "smlicense",
                  "", 0);
  @ (Property: sitemap-license)<br>
  entry_attribute("Contact", 40, "sitemap-contact", "smcontact",
                  "", 0);
  @ (Property: sitemap-contact)
  @ <hr />













































  onoff_attribute("Use HTML as wiki markup language",
    "wiki-use-html", "wiki-use-html", 0, 0);
  @ <p>Use HTML as the wiki markup language. Wiki links will still be parsed
  @ but all other wiki formatting will be ignored. This option is helpful
  @ if you have chosen to use a rich HTML editor for wiki markup such as
  @ TinyMCE.</p>
  @ <p><strong>CAUTION:</strong> when
................................................................................
/*
** WEBPAGE: setup_modreq
**
** Admin page for setting up moderation of tickets and wiki.
*/
void setup_modreq(void){
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
    return;
  }

  style_header("Moderator For Wiki And Tickets");
  db_begin_transaction();
  @ <form action="%R/setup_modreq" method="post"><div>
................................................................................
** WEBPAGE: setup_adunit
**
** Administrative page for configuring and controlling ad units
** and how they are displayed.
*/
void setup_adunit(void){
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
    return;
  }
  db_begin_transaction();
  if( P("clear")!=0 && cgi_csrf_safe(1) ){
    db_multi_exec("DELETE FROM config WHERE name GLOB 'adunit*'");
    cgi_replace_parameter("adunit","");
................................................................................
  if( szLogoImg>0 ){
    zLogoMime = PD("logoim:mimetype","image/gif");
  }
  if( szBgImg>0 ){
    zBgMime = PD("bgim:mimetype","image/gif");
  }
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
    return;
  }
  db_begin_transaction();
  if( !cgi_csrf_safe(1) ){
    /* Allow no state changes if not safe from CSRF */
  }else if( P("setlogo")!=0 && zLogoMime && zLogoMime[0] && szLogoImg>0 ){
................................................................................
}


/*
** WEBPAGE: admin_sql
**
** Run raw SQL commands against the database file using the web interface.
** Requires Admin privileges.
*/
void sql_page(void){
  const char *zQ;
  int go = P("go")!=0;
  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
................................................................................
void page_admin_log(){
  Stmt stLog;
  int limit;                 /* How many entries to show */
  int ofst;                  /* Offset to the first entry */
  int fLogEnabled;
  int counter = 0;
  login_check_credentials();
  if( !g.perm.Setup && !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("Admin Log");
  create_admin_log_table();
  limit = atoi(PD("n","200"));
  ofst = atoi(PD("x","0"));
................................................................................
/*
** WEBPAGE: srchsetup
**
** Configure the search engine.  Requires Admin privilege.
*/
void page_srchsetup(){
  login_check_credentials();
  if( !g.perm.Setup && !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("Search Configuration");
  @ <form action="%s(g.zTop)/srchsetup" method="post"><div>
  login_insert_csrf_secret();
  @ <div style="text-align:center;font-weight:bold;">
................................................................................
** Configure the URL aliases
*/
void page_waliassetup(){
  Stmt q;
  int cnt = 0;
  Blob namelist;
  login_check_credentials();
  if( !g.perm.Setup && !g.perm.Admin ){
    login_needed(0);
    return;
  }
  style_header("URL Alias Configuration");
  if( P("submit")!=0 ){
    Blob token;
    Blob sql;

  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }


  style_submenu_element("Add", "setup_uedit");
  style_submenu_element("Log", "access_log");
  style_submenu_element("Help", "setup_ulist_notes");
  style_header("User List");
  if( zWith==0 || zWith[0]==0 ){
    @ <table border=1 cellpadding=2 cellspacing=0 class='userTable'>
    @ <thead><tr>
    @   <th>Category
    @   <th>Capabilities (<a href='%R/setup_ucap_list'>key</a>)
    @   <th>Info <th>Last Change</tr></thead>
    @ <tbody>
    db_prepare(&s,
................................................................................
        @ <td>%h(zDate)
      }else{
        @ <td>
      }
      @ </tr>
    }
    db_finalize(&s);
    @ </tbody></table>
    @ <div class='section'>Users</div>
  }else{
    style_submenu_element("All Users", "setup_ulist");
    if( zWith[1]==0 ){
      @ <div class='section'>Users with capability "%h(zWith)"</div>
    }else{
      @ <div class='section'>Users with any capability in "%h(zWith)"</div>

    }
  }


  @ <table border=1 cellpadding=2 cellspacing=0 class='userTable sortable' \
  @  data-column-types='ktxTTK' data-init-sort='2'>
  @ <thead><tr>
  @ <th>Login Name<th>Caps<th>Info<th>Date<th>Expire<th>Last Login</tr></thead>
  @ <tbody>
  db_multi_exec(
    "CREATE TEMP TABLE lastAccess(uname TEXT PRIMARY KEY, atime REAL)"

  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }

  if( zWith==0 || zWith[0]==0 ){
    style_submenu_element("Add", "setup_uedit");
    style_submenu_element("Log", "access_log");
    style_submenu_element("Help", "setup_ulist_notes");
    style_header("User List");

    @ <table border=1 cellpadding=2 cellspacing=0 class='userTable'>
    @ <thead><tr>
    @   <th>Category
    @   <th>Capabilities (<a href='%R/setup_ucap_list'>key</a>)
    @   <th>Info <th>Last Change</tr></thead>
    @ <tbody>
    db_prepare(&s,
................................................................................
        @ <td>%h(zDate)
      }else{
        @ <td>
      }
      @ </tr>
    }
    db_finalize(&s);


  }else{





    style_header("Users With Capabilities \"%h\"", zWith);
  }

  @ </tbody></table>
  @ <div class='section'>Users</div>
  @ <table border=1 cellpadding=2 cellspacing=0 class='userTable sortable' \
  @  data-column-types='ktxTTK' data-init-sort='2'>
  @ <thead><tr>
  @ <th>Login Name<th>Caps<th>Info<th>Date<th>Expire<th>Last Login</tr></thead>
  @ <tbody>
  db_multi_exec(
    "CREATE TEMP TABLE lastAccess(uname TEXT PRIMARY KEY, atime REAL)"

**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
** This SQLite extension implements functions that compute SHA3 hashes.
** Two SQL functions are implemented:
**
**     sha3(X,SIZE)
**     sha3_query(Y,SIZE)
**
** The sha3(X) function computes the SHA3 hash of the input X, or NULL if
** X is NULL.
................................................................................
#  define mkdir(path,mode) _mkdir(path)
#  define lstat(path,buf) stat(path,buf)
#endif
#include <time.h>
#include <errno.h>


/*
** Structure of the fsdir() table-valued function
*/
                 /*    0    1    2     3    4           5             */
#define FSDIR_SCHEMA "(name,mode,mtime,data,path HIDDEN,dir HIDDEN)"
#define FSDIR_COLUMN_NAME     0     /* Name of the file */
#define FSDIR_COLUMN_MODE     1     /* Access mode */
#define FSDIR_COLUMN_MTIME    2     /* Last modification time */
#define FSDIR_COLUMN_DATA     3     /* File content */
#define FSDIR_COLUMN_PATH     4     /* Path to top of search */
#define FSDIR_COLUMN_DIR      5     /* Path is relative to this directory */


/*
** Set the result stored by context ctx to a blob containing the 
** contents of file zName.
*/
static void readFileContents(sqlite3_context *ctx, const char *zName){
  FILE *in;
................................................................................
static int fsdirColumn(
  sqlite3_vtab_cursor *cur,   /* The cursor */
  sqlite3_context *ctx,       /* First argument to sqlite3_result_...() */
  int i                       /* Which column to return */
){
  fsdir_cursor *pCur = (fsdir_cursor*)cur;
  switch( i ){
    case FSDIR_COLUMN_NAME: {
      sqlite3_result_text(ctx, &pCur->zPath[pCur->nBase], -1, SQLITE_TRANSIENT);
      break;
    }

    case FSDIR_COLUMN_MODE:
      sqlite3_result_int64(ctx, pCur->sStat.st_mode);
      break;

    case FSDIR_COLUMN_MTIME:
      sqlite3_result_int64(ctx, pCur->sStat.st_mtime);
      break;

    case FSDIR_COLUMN_DATA: {
      mode_t m = pCur->sStat.st_mode;
      if( S_ISDIR(m) ){
        sqlite3_result_null(ctx);
#if !defined(_WIN32) && !defined(WIN32)
      }else if( S_ISLNK(m) ){
        char aStatic[64];
        char *aBuf = aStatic;
................................................................................
        sqlite3_result_text(ctx, aBuf, n, SQLITE_TRANSIENT);
        if( aBuf!=aStatic ) sqlite3_free(aBuf);
#endif
      }else{
        readFileContents(ctx, pCur->zPath);
      }
    }
    case FSDIR_COLUMN_PATH:
    default: {
      /* The FSDIR_COLUMN_PATH and FSDIR_COLUMN_DIR are input parameters.
      ** always return their values as NULL */
      break;
    }
  }
  return SQLITE_OK;
}

/*
** Return the rowid for the current row. In this implementation, the
** first row returned is assigned rowid value 1, and each subsequent
................................................................................
static int fsdirEof(sqlite3_vtab_cursor *cur){
  fsdir_cursor *pCur = (fsdir_cursor*)cur;
  return (pCur->zPath==0);
}

/*
** xFilter callback.
**
** idxNum==1   PATH parameter only
** idxNum==2   Both PATH and DIR supplied
*/
static int fsdirFilter(
  sqlite3_vtab_cursor *cur, 
  int idxNum, const char *idxStr,
  int argc, sqlite3_value **argv
){
  const char *zDir = 0;
................................................................................
** that uses the generate_series virtual table.  This routine needs to create
** a query plan for each invocation and compute an estimated cost for that
** plan.
**
** In this implementation idxNum is used to represent the
** query plan.  idxStr is unused.
**
** The query plan is represented by values of idxNum:
**
**  (1)  The path value is supplied by argv[0]
**  (2)  Path is in argv[0] and dir is in argv[1]


*/
static int fsdirBestIndex(
  sqlite3_vtab *tab,
  sqlite3_index_info *pIdxInfo
){
  int i;                 /* Loop over constraints */
  int idxPath = -1;      /* Index in pIdxInfo->aConstraint of PATH= */
  int idxDir = -1;       /* Index in pIdxInfo->aConstraint of DIR= */
  int seenPath = 0;      /* True if an unusable PATH= constraint is seen */
  int seenDir = 0;       /* True if an unusable DIR= constraint is seen */
  const struct sqlite3_index_constraint *pConstraint;

  (void)tab;
  pConstraint = pIdxInfo->aConstraint;
  for(i=0; i<pIdxInfo->nConstraint; i++, pConstraint++){

    if( pConstraint->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue;
    switch( pConstraint->iColumn ){
      case FSDIR_COLUMN_PATH: {
        if( pConstraint->usable ){
          idxPath = i;
          seenPath = 0;
        }else if( idxPath<0 ){
          seenPath = 1;
        }
        break;
      }
      case FSDIR_COLUMN_DIR: {
        if( pConstraint->usable ){
          idxDir = i;
          seenDir = 0;
        }else if( idxDir<0 ){
          seenDir = 1;
        }
        break;
      }
    } 
  }
  if( seenPath || seenDir ){
    /* If input parameters are unusable, disallow this plan */
    return SQLITE_CONSTRAINT;
  }

  if( idxPath<0 ){
    pIdxInfo->idxNum = 0;
    /* The pIdxInfo->estimatedCost should have been initialized to a huge
    ** number.  Leave it unchanged. */
    pIdxInfo->estimatedRows = 0x7fffffff;
  }else{
    pIdxInfo->aConstraintUsage[idxPath].omit = 1;
    pIdxInfo->aConstraintUsage[idxPath].argvIndex = 1;
    if( idxDir>=0 ){
      pIdxInfo->aConstraintUsage[idxDir].omit = 1;
      pIdxInfo->aConstraintUsage[idxDir].argvIndex = 2;
      pIdxInfo->idxNum = 2;
      pIdxInfo->estimatedCost = 10.0;
    }else{
      pIdxInfo->idxNum = 1;
      pIdxInfo->estimatedCost = 100.0;
    }
  }
................................................................................
    0,                         /* xSync */
    0,                         /* xCommit */
    0,                         /* xRollback */
    0,                         /* xFindMethod */
    0,                         /* xRename */
    0,                         /* xSavepoint */
    0,                         /* xRelease */
    0,                         /* xRollbackTo */
    0,                         /* xShadowName */
  };

  int rc = sqlite3_create_module(db, "fsdir", &fsdirModule, 0);
  return rc;
}
#else         /* SQLITE_OMIT_VIRTUALTABLE */
# define fsdirRegister(x) SQLITE_OK
................................................................................
  0,                         /* xSync */
  0,                         /* xCommit */
  0,                         /* xRollback */
  0,                         /* xFindMethod */
  0,                         /* xRename */
  0,                         /* xSavepoint */
  0,                         /* xRelease */
  0,                         /* xRollbackTo */
  0                          /* xShadowName */
};

#endif /* SQLITE_OMIT_VIRTUALTABLE */

int sqlite3CompletionVtabInit(sqlite3 *db){
  int rc = SQLITE_OK;
#ifndef SQLITE_OMIT_VIRTUALTABLE
................................................................................
** xBestIndex callback.
*/
static int zipfileBestIndex(
  sqlite3_vtab *tab,
  sqlite3_index_info *pIdxInfo
){
  int i;
  int idx = -1;
  int unusable = 0;

  for(i=0; i<pIdxInfo->nConstraint; i++){
    const struct sqlite3_index_constraint *pCons = &pIdxInfo->aConstraint[i];
    if( pCons->iColumn!=ZIPFILE_F_COLUMN_IDX ) continue;
    if( pCons->usable==0 ){
      unusable = 1;
    }else if( pCons->op==SQLITE_INDEX_CONSTRAINT_EQ ){
      idx = i;


    }
  }
  if( idx>=0 ){

    pIdxInfo->aConstraintUsage[idx].argvIndex = 1;
    pIdxInfo->aConstraintUsage[idx].omit = 1;
    pIdxInfo->estimatedCost = 1000.0;
    pIdxInfo->idxNum = 1;
  }else if( unusable ){

    return SQLITE_CONSTRAINT;
  }

  return SQLITE_OK;
}

static ZipfileEntry *zipfileNewEntry(const char *zPath){
  ZipfileEntry *pNew;
  pNew = sqlite3_malloc(sizeof(ZipfileEntry));
  if( pNew ){
................................................................................
    0,                            /* xCommit - commit transaction */
    0,                            /* xRollback - rollback transaction */
    0,                            /* xFindFunction - function overloading */
    0,                            /* xRename - rename the table */
    0,                            /* xSavepoint */
    0,                            /* xRelease */
    0,                            /* xRollbackTo */
    0,                            /* xShadowName */
  };

  return sqlite3_create_module(p->dbv, "expert", &expertModule, (void*)p);
}
/*
** End of virtual table implementation.
*************************************************************************/
................................................................................
#define AUTOEQP_off      0           /* Automatic EXPLAIN QUERY PLAN is off */
#define AUTOEQP_on       1           /* Automatic EQP is on */
#define AUTOEQP_trigger  2           /* On and also show plans for triggers */
#define AUTOEQP_full     3           /* Show full EXPLAIN */

/* Allowed values for ShellState.openMode
*/
#define SHELL_OPEN_UNSPEC      0      /* No open-mode specified */
#define SHELL_OPEN_NORMAL      1      /* Normal database file */
#define SHELL_OPEN_APPENDVFS   2      /* Use appendvfs */
#define SHELL_OPEN_ZIPFILE     3      /* Use the zipfile virtual table */
#define SHELL_OPEN_READONLY    4      /* Open a normal database read-only */
#define SHELL_OPEN_DESERIALIZE 5      /* Open using sqlite3_deserialize() */

/*
** These are the allowed shellFlgs values
*/
#define SHFLG_Pagecache      0x00000001 /* The --pagecache option is used */
#define SHFLG_Lookaside      0x00000002 /* Lookaside memory is used */
#define SHFLG_Backslash      0x00000004 /* The --backslash option is used */
................................................................................
  if( x!=sz ){
    sqlite3_result_error(context, "could not read back the whole file", -1);
    goto edit_func_end;
  }
  if( bBin ){
    sqlite3_result_blob64(context, p, sz, sqlite3_free);
  }else{
    sqlite3_int64 i, j;
    if( hasCRNL ){
      /* If the original contains \r\n then do no conversions back to \n */
      j = sz;
    }else{
      /* If the file did not originally contain \r\n then convert any new
      ** \r\n back into \n */
      for(i=j=0; i<sz; i++){
................................................................................
    sqlite3_free(zErr);
    free(zQ2);
  }
  return rc;
}

/*
** Text of help messages.
**
** The help text for each individual command begins with a line that starts
** with ".".  Subsequent lines are supplimental information.
**
** There must be two or more spaces between the end of the command and the
** start of the description of what that command does.
*/
static const char *(azHelp[]) = {

#if defined(SQLITE_HAVE_ZLIB) && !defined(SQLITE_OMIT_VIRTUALTABLE)
  ".archive ...             Manage SQL archives",
  "   Each command must have exactly one of the following options:",
  "     -c, --create               Create a new archive",
  "     -u, --update               Update or add files to an existing archive",
  "     -t, --list                 List contents of archive",
  "     -x, --extract              Extract files from archive",
  "   Optional arguments:",
  "     -v, --verbose              Print each filename as it is processed",
  "     -f FILE, --file FILE       Operate on archive FILE (default is current db)",
  "     -a FILE, --append FILE     Operate on FILE opened using the apndvfs VFS",
  "     -C DIR, --directory DIR    Change to directory DIR to read/extract files",
  "     -n, --dryrun               Show the SQL that would have occurred",
  "   Examples:",
  "     .ar -cf archive.sar foo bar  # Create archive.sar from files foo and bar",
  "     .ar -tf archive.sar          # List members of archive.sar",
  "     .ar -xvf archive.sar         # Verbosely extract files from archive.sar",
  "   See also:",
  "      http://sqlite.org/cli.html#sqlar_archive_support",
#endif
#ifndef SQLITE_OMIT_AUTHORIZATION
  ".auth ON|OFF             Show authorizer callbacks",
#endif
  ".backup ?DB? FILE        Backup DB (default \"main\") to FILE",
  "       --append            Use the appendvfs",

  ".bail on|off             Stop after hitting an error.  Default OFF",
  ".binary on|off           Turn binary output on or off.  Default OFF",
  ".cd DIRECTORY            Change the working directory to DIRECTORY",
  ".changes on|off          Show number of rows changed by SQL",
  ".check GLOB              Fail if output since .testcase does not match",
  ".clone NEWDB             Clone data into NEWDB from the existing database",
  ".databases               List names and files of attached databases",
  ".dbconfig ?op? ?val?     List or change sqlite3_db_config() options",
  ".dbinfo ?DB?             Show status information about the database",
  ".dump ?TABLE? ...        Render all database content as SQL",
  "   Options:",
  "     --preserve-rowids      Include ROWID values in the output",
  "     --newlines             Allow unescaped newline characters in output",
  "   TABLE is LIKE pattern for the tables to dump",


  ".echo on|off             Turn command echo on or off",
  ".eqp on|off|full         Enable or disable automatic EXPLAIN QUERY PLAN",
  ".excel                   Display the output of next command in a spreadsheet",
  ".exit ?CODE?             Exit this program with return-code CODE",
  ".expert                  EXPERIMENTAL. Suggest indexes for specified queries",
/* Because explain mode comes on automatically now, the ".explain" mode
** is removed from the help screen.  It is still supported for legacy, however */
/*".explain ?on|off|auto?   Turn EXPLAIN output mode on or off or to automatic",*/
  ".fullschema ?--indent?   Show schema and the content of sqlite_stat tables",
  ".headers on|off          Turn display of headers on or off",
  ".help ?-all? ?PATTERN?   Show help text for PATTERN",

  ".import FILE TABLE       Import data from FILE into TABLE",
#ifndef SQLITE_OMIT_TEST_CONTROL
  ".imposter INDEX TABLE    Create imposter table TABLE on index INDEX",
#endif
  ".indexes ?TABLE?         Show names of indexes",
  "                           If TABLE is specified, only show indexes for",
  "                           tables matching TABLE using the LIKE operator.",
#ifdef SQLITE_ENABLE_IOTRACE
  ".iotrace FILE            Enable I/O diagnostic logging to FILE",
#endif
  ".limit ?LIMIT? ?VAL?     Display or change the value of an SQLITE_LIMIT",
  ".lint OPTIONS            Report potential schema issues.",
  "     Options:",
  "        fkey-indexes     Find missing foreign key indexes",
#ifndef SQLITE_OMIT_LOAD_EXTENSION
  ".load FILE ?ENTRY?       Load an extension library",
#endif
  ".log FILE|off            Turn logging on or off.  FILE can be stderr/stdout",
  ".mode MODE ?TABLE?       Set output mode",
  "   MODE is one of:",
  "     ascii    Columns/rows delimited by 0x1F and 0x1E",
  "     csv      Comma-separated values",
  "     column   Left-aligned columns.  (See .width)",
  "     html     HTML <table> code",
  "     insert   SQL insert statements for TABLE",
  "     line     One value per line",
  "     list     Values delimited by \"|\"",
  "     quote    Escape answers as for SQL",
  "     tabs     Tab-separated values",
  "     tcl      TCL list elements",
  ".nullvalue STRING        Use STRING in place of NULL values",
  ".once (-e|-x|FILE)       Output for the next SQL command only to FILE",
  "     If FILE begins with '|' then open as a pipe",
  "     Other options:",
  "       -e    Invoke system text editor",
  "       -x    Open in a spreadsheet",

  ".open ?OPTIONS? ?FILE?   Close existing database and reopen FILE",
  "     Options:",
  "        --append        Use appendvfs to append database to the end of FILE",
#ifdef SQLITE_ENABLE_DESERIALIZE
  "        --deserialize   Load into memory useing sqlite3_deserialize()",
#endif
  "        --new           Initialize FILE to an empty database",
  "        --readonly      Open FILE readonly",
  "        --zip           FILE is a ZIP archive",


  ".output ?FILE?           Send output to FILE or stdout if FILE is omitted",
  "     If FILE begins with '|' then open it as a pipe.",
  ".print STRING...         Print literal STRING",
  ".prompt MAIN CONTINUE    Replace the standard prompts",
  ".quit                    Exit this program",
  ".read FILE               Read input from FILE",

  ".restore ?DB? FILE       Restore content of DB (default \"main\") from FILE",
  ".save FILE               Write in-memory database into FILE",
  ".scanstats on|off        Turn sqlite3_stmt_scanstatus() metrics on or off",
  ".schema ?PATTERN?        Show the CREATE statements matching PATTERN",
  "     Options:",
  "         --indent            Try to pretty-print the schema",

  ".selftest ?OPTIONS?      Run tests defined in the SELFTEST table",
  "    Options:",
  "       --init               Create a new SELFTEST table",
  "       -v                   Verbose output",
  ".separator COL ?ROW?     Change the column and row separators",


#if defined(SQLITE_ENABLE_SESSION)
  ".session ?NAME? CMD ...  Create or control sessions",
  "   Subcommands:",
  "     attach TABLE             Attach TABLE",
  "     changeset FILE           Write a changeset into FILE",
  "     close                    Close one session",
  "     enable ?BOOLEAN?         Set or query the enable bit",
  "     filter GLOB...           Reject tables matching GLOBs",
  "     indirect ?BOOLEAN?       Mark or query the indirect status",
  "     isempty                  Query whether the session is empty",
  "     list                     List currently open session names",
  "     open DB NAME             Open a new session on DB",
  "     patchset FILE            Write a patchset into FILE",
  "   If ?NAME? is omitted, the first defined session is used.",
#endif
  ".sha3sum ...             Compute a SHA3 hash of database content",
  "    Options:",
  "      --schema              Also hash the sqlite_master table",
  "      --sha3-224            Use the sha3-224 algorithm",
  "      --sha3-256            Use the sha3-256 algorithm.  This is the default.",
  "      --sha3-384            Use the sha3-384 algorithm",
  "      --sha3-512            Use the sha3-512 algorithm",
  "    Any other argument is a LIKE pattern for tables to hash",
#ifndef SQLITE_NOHAVE_SYSTEM
  ".shell CMD ARGS...       Run CMD ARGS... in a system shell",
#endif
  ".show                    Show the current values for various settings",
  ".stats ?on|off?          Show stats or turn stats on or off",
#ifndef SQLITE_NOHAVE_SYSTEM
  ".system CMD ARGS...      Run CMD ARGS... in a system shell",
#endif
  ".tables ?TABLE?          List names of tables matching LIKE pattern TABLE",


  ".testcase NAME           Begin redirecting output to 'testcase-out.txt'",
  ".timeout MS              Try opening locked tables for MS milliseconds",
  ".timer on|off            Turn SQL timer on or off",
  ".trace FILE|off          Output each SQL statement as it is run",
  ".vfsinfo ?AUX?           Information about the top-level VFS",
  ".vfslist                 List all available VFSes",
  ".vfsname ?AUX?           Print the name of the VFS stack",
  ".width NUM1 NUM2 ...     Set column widths for \"column\" mode",
  "     Negative values right-justify",
};



/*
** Output help text.
**
** zPattern describes the set of commands for which help text is provided.
** If zPattern is NULL, then show all commands, but only give a one-line
** description of each.
**
** Return the number of matches.

*/
static int showHelp(FILE *out, const char *zPattern){
  int i = 0;
  int j = 0;
  int n = 0;
  char *zPat;
  if( zPattern==0
   || zPattern[0]=='0'
   || strcmp(zPattern,"-a")==0
   || strcmp(zPattern,"-all")==0















  ){
    /* Show all commands, but only one line per command */
    if( zPattern==0 ) zPattern = "";
    for(i=0; i<ArraySize(azHelp); i++){
      if( azHelp[i][0]=='.' || zPattern[0] ){
        utf8_printf(out, "%s\n", azHelp[i]);
        n++;
      }

    }
  }else{
    /* Look for commands that for which zPattern is an exact prefix */
    zPat = sqlite3_mprintf(".%s*", zPattern);
    for(i=0; i<ArraySize(azHelp); i++){
      if( sqlite3_strglob(zPat, azHelp[i])==0 ){
        utf8_printf(out, "%s\n", azHelp[i]);
        j = i+1;
        n++;
      }
    }
    sqlite3_free(zPat);
    if( n ){
      if( n==1 ){
        /* when zPattern is a prefix of exactly one command, then include the
        ** details of that command, which should begin at offset j */
        while( j<ArraySize(azHelp)-1 && azHelp[j][0]!='.' ){
          utf8_printf(out, "%s\n", azHelp[j]);
          j++;
        }
      }
      return n;
    }
    /* Look for commands that contain zPattern anywhere.  Show the complete
    ** text of all commands that match. */
    zPat = sqlite3_mprintf("%%%s%%", zPattern);
    for(i=0; i<ArraySize(azHelp); i++){
      if( azHelp[i][0]=='.' ) j = i;
      if( sqlite3_strlike(zPat, azHelp[i], 0)==0 ){
        utf8_printf(out, "%s\n", azHelp[j]);
        while( j<ArraySize(azHelp)-1 && azHelp[j+1][0]!='.' ){
          j++;
          utf8_printf(out, "%s\n", azHelp[j]);
        }
        i = j;
        n++;
      }
    }
    sqlite3_free(zPat);
  }
  return n;
}

/* Forward reference */
static int process_input(ShellState *p, FILE *in);

/*
** Read the content of file zName into memory obtained from sqlite3_malloc64()
** and return a pointer to the buffer. The caller is responsible for freeing
................................................................................
  size_t nRead;
  char *pBuf;
  if( in==0 ) return 0;
  fseek(in, 0, SEEK_END);
  nIn = ftell(in);
  rewind(in);
  pBuf = sqlite3_malloc64( nIn+1 );
  if( pBuf==0 ){ fclose(in); return 0; }
  nRead = fread(pBuf, nIn, 1, in);
  fclose(in);
  if( nRead!=1 ){
    sqlite3_free(pBuf);
    return 0;
  }
  pBuf[nIn] = 0;
................................................................................
  if( f==0 ){
    if( dfltZip && sqlite3_strlike("%.zip",zName,0)==0 ){
       return SHELL_OPEN_ZIPFILE;
    }else{
       return SHELL_OPEN_NORMAL;
    }
  }
  n = fread(zBuf, 16, 1, f);
  if( n==1 && memcmp(zBuf, "SQLite format 3", 16)==0 ){
    fclose(f);
    return SHELL_OPEN_NORMAL;
  }
  fseek(f, -25, SEEK_END);
  n = fread(zBuf, 25, 1, f);
  if( n==1 && memcmp(zBuf, "Start-Of-SQLite3-", 17)==0 ){
    rc = SHELL_OPEN_APPENDVFS;
  }else{
    fseek(f, -22, SEEK_END);
    n = fread(zBuf, 22, 1, f);
................................................................................
    }
    switch( p->openMode ){
      case SHELL_OPEN_APPENDVFS: {
        sqlite3_open_v2(p->zDbFilename, &p->db, 
           SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE, "apndvfs");
        break;
      }
      case SHELL_OPEN_DESERIALIZE: {
        sqlite3_open(0, &p->db);
        break;
      }
      case SHELL_OPEN_ZIPFILE: {
        sqlite3_open(":memory:", &p->db);
        break;
      }
      case SHELL_OPEN_READONLY: {
        sqlite3_open_v2(p->zDbFilename, &p->db, SQLITE_OPEN_READONLY, 0);
        break;
................................................................................
#endif
    if( p->openMode==SHELL_OPEN_ZIPFILE ){
      char *zSql = sqlite3_mprintf(
         "CREATE VIRTUAL TABLE zip USING zipfile(%Q);", p->zDbFilename);
      sqlite3_exec(p->db, zSql, 0, 0, 0);
      sqlite3_free(zSql);
    }
#ifdef SQLITE_ENABLE_DESERIALIZE
    else if( p->openMode==SHELL_OPEN_DESERIALIZE ){
      int nData = 0;
      unsigned char *aData = (unsigned char*)readFile(p->zDbFilename, &nData);
      int rc = sqlite3_deserialize(p->db, "main", aData, nData, nData,
                   SQLITE_DESERIALIZE_RESIZEABLE |
                   SQLITE_DESERIALIZE_FREEONCLOSE);
      if( rc ){
        utf8_printf(stderr, "Error: sqlite3_deserialize() returns %d\n", rc);
      }
    }
#endif
  }
}

/*
** Attempt to close the databaes connection.  Report errors.
*/
void close_db(sqlite3 *db){
................................................................................
){
  *ppStmt = 0;
  if( *pRc==SQLITE_OK ){
    va_list ap;
    char *z;
    va_start(ap, zFmt);
    z = sqlite3_vmprintf(zFmt, ap);
    va_end(ap);
    if( z==0 ){
      *pRc = SQLITE_NOMEM;
    }else{
      shellPrepare(db, pRc, z, ppStmt);
      sqlite3_free(z);
    }
  }
................................................................................
  sqlite3 *db;                    /* Database containing the archive */
};

/*
** Print a usage message for the .ar command to stderr and return SQLITE_ERROR.
*/
static int arUsage(FILE *f){
  showHelp(f,"archive");

























  return SQLITE_ERROR;
}

/*
** Print an error message for the .ar command to stderr and return 
** SQLITE_ERROR.
*/
................................................................................
    { "directory", 'C', AR_SWITCH_DIRECTORY, 1 },
    { "dryrun",    'n', AR_SWITCH_DRYRUN,    0 },
  };
  int nSwitch = sizeof(aSwitch) / sizeof(struct ArSwitch);
  struct ArSwitch *pEnd = &aSwitch[nSwitch];

  if( nArg<=1 ){
    utf8_printf(stderr, "Wrong number of arguments.  Usage:\n");
    return arUsage(stderr);
  }else{
    char *z = azArg[1];
    if( z[0]!='-' ){
      /* Traditional style [tar] invocation */
      int i;
      int iArg = 2;
................................................................................
      utf8_printf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
      rc = 1;
    }
  }else

  if( c=='d' && n>=3 && strncmp(azArg[0], "dbconfig", n)==0 ){
    static const struct DbConfigChoices {
      const char *zName;
      int op;
    } aDbConfig[] = {
        { "enable_fkey",      SQLITE_DBCONFIG_ENABLE_FKEY            },
        { "enable_trigger",   SQLITE_DBCONFIG_ENABLE_TRIGGER         },
        { "fts3_tokenizer",   SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER  },
        { "load_extension",   SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION  },
        { "no_ckpt_on_close", SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE       },
        { "enable_qpsg",      SQLITE_DBCONFIG_ENABLE_QPSG            },
        { "trigger_eqp",      SQLITE_DBCONFIG_TRIGGER_EQP            },
        { "reset_database",   SQLITE_DBCONFIG_RESET_DATABASE         },
        { "defensive",        SQLITE_DBCONFIG_DEFENSIVE              },
    };
    int ii, v;
    open_db(p, 0);
    for(ii=0; ii<ArraySize(aDbConfig); ii++){
      if( nArg>1 && strcmp(azArg[1], aDbConfig[ii].zName)!=0 ) continue;
      if( nArg>=3 ){
        sqlite3_db_config(p->db, aDbConfig[ii].op, booleanValue(azArg[2]), 0);
................................................................................
    }else{
      raw_printf(stderr, "Usage: .headers on|off\n");
      rc = 1;
    }
  }else

  if( c=='h' && strncmp(azArg[0], "help", n)==0 ){
    if( nArg>=2 ){
      n = showHelp(p->out, azArg[1]);
      if( n==0 ){
        utf8_printf(p->out, "Nothing matches '%s'\n", azArg[1]);
      }
    }else{
      showHelp(p->out, 0);
    }
  }else

  if( c=='i' && strncmp(azArg[0], "import", n)==0 ){
    char *zTable;               /* Insert data into this table */
    char *zFile;                /* Name of file to extra content from */
    sqlite3_stmt *pStmt = NULL; /* A statement */
    int nCol;                   /* Number of columns in the table */
................................................................................
      }else if( optionMatch(z, "zip") ){
        p->openMode = SHELL_OPEN_ZIPFILE;
#endif
      }else if( optionMatch(z, "append") ){
        p->openMode = SHELL_OPEN_APPENDVFS;
      }else if( optionMatch(z, "readonly") ){
        p->openMode = SHELL_OPEN_READONLY;
#ifdef SQLITE_ENABLE_DESERIALIZE
      }else if( optionMatch(z, "deserialize") ){
        p->openMode = SHELL_OPEN_DESERIALIZE;
#endif
      }else if( z[0]=='-' ){
        utf8_printf(stderr, "unknown option: %s\n", z);
        rc = 1;
        goto meta_command_exit;
      }
    }
    /* If a filename is specified, try to open it first */
................................................................................
      pSession->nFilter = 0;
      sqlite3session_table_filter(pSession->p, session_filter, pSession);
      p->nSession++;
      pSession->zName = sqlite3_mprintf("%s", zName);
    }else
    /* If no command name matches, show a syntax error */
    session_syntax_error:
    showHelp(p->out, "session");
  }else
#endif

#ifdef SQLITE_DEBUG
  /* Undocumented commands for internal testing.  Subject to change
  ** without notice. */
  if( c=='s' && n>=10 && strncmp(azArg[0], "selftest-", 9)==0 ){
................................................................................
      { "always",             SQLITE_TESTCTRL_ALWAYS,        "BOOLEAN"            },
      { "assert",             SQLITE_TESTCTRL_ASSERT,        "BOOLEAN"            },
    /*{ "benign_malloc_hooks",SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS, ""          },*/
    /*{ "bitvec_test",        SQLITE_TESTCTRL_BITVEC_TEST,   ""                },*/
      { "byteorder",          SQLITE_TESTCTRL_BYTEORDER,     ""                   },
    /*{ "fault_install",      SQLITE_TESTCTRL_FAULT_INSTALL, ""                }, */
      { "imposter",           SQLITE_TESTCTRL_IMPOSTER,   "SCHEMA ON/OFF ROOTPAGE"},
      { "internal_functions", SQLITE_TESTCTRL_INTERNAL_FUNCTIONS, "BOOLEAN"       },
      { "localtime_fault",    SQLITE_TESTCTRL_LOCALTIME_FAULT,"BOOLEAN"           },
      { "never_corrupt",      SQLITE_TESTCTRL_NEVER_CORRUPT, "BOOLEAN"            },
      { "optimizations",      SQLITE_TESTCTRL_OPTIMIZATIONS, "DISABLE-MASK"       },
#ifdef YYCOVERAGE
      { "parser_coverage",    SQLITE_TESTCTRL_PARSER_COVERAGE, ""                 },
#endif
      { "pending_byte",       SQLITE_TESTCTRL_PENDING_BYTE,  "OFFSET  "           },
................................................................................
            isOk = 3;
          }
          break;

        /* sqlite3_test_control(int, int) */
        case SQLITE_TESTCTRL_ASSERT:
        case SQLITE_TESTCTRL_ALWAYS:
        case SQLITE_TESTCTRL_INTERNAL_FUNCTIONS:
          if( nArg==3 ){
            int opt = booleanValue(azArg[2]);
            rc2 = sqlite3_test_control(testctrl, opt);
            isOk = 1;
          }
          break;

................................................................................
/*
** We need a default sqlite3_complete() implementation to use in case
** the shell is compiled with SQLITE_OMIT_COMPLETE.  The default assumes
** any arbitrary text is a complete SQL statement.  This is not very
** user-friendly, but it does seem to work.
*/
#ifdef SQLITE_OMIT_COMPLETE
#define sqlite3_complete(x) 1
#endif

/*
** Return true if zSql is a complete SQL statement.  Return false if it
** ends in the middle of a string literal or C-style comment.
*/
static int line_is_complete(char *zSql, int nSql){
................................................................................
      zVfs = cmdline_option_value(argc, argv, ++i);
#ifdef SQLITE_HAVE_ZLIB
    }else if( strcmp(z,"-zip")==0 ){
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif
    }else if( strcmp(z,"-append")==0 ){
      data.openMode = SHELL_OPEN_APPENDVFS;
#ifdef SQLITE_ENABLE_DESERIALIZE
    }else if( strcmp(z,"-deserialize")==0 ){
      data.openMode = SHELL_OPEN_DESERIALIZE;
#endif
    }else if( strcmp(z,"-readonly")==0 ){
      data.openMode = SHELL_OPEN_READONLY;
#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB)
    }else if( strncmp(z, "-A",2)==0 ){
      /* All remaining command-line arguments are passed to the ".archive"
      ** command, so ignore them */
      break;
................................................................................
      memcpy(data.colSeparator,",",2);
#ifdef SQLITE_HAVE_ZLIB
    }else if( strcmp(z,"-zip")==0 ){
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif
    }else if( strcmp(z,"-append")==0 ){
      data.openMode = SHELL_OPEN_APPENDVFS;
#ifdef SQLITE_ENABLE_DESERIALIZE
    }else if( strcmp(z,"-deserialize")==0 ){
      data.openMode = SHELL_OPEN_DESERIALIZE;
#endif
    }else if( strcmp(z,"-readonly")==0 ){
      data.openMode = SHELL_OPEN_READONLY;
    }else if( strcmp(z,"-ascii")==0 ){
      data.mode = MODE_Ascii;
      sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator,
                       SEP_Unit);
      sqlite3_snprintf(sizeof(data.rowSeparator), data.rowSeparator,
................................................................................
    }
    free(azCmd);
  }else{
    /* Run commands received from standard input
    */
    if( stdin_is_interactive ){
      char *zHome;
      char *zHistory;
      int nHistory;
      printf(
        "SQLite version %s %.19s\n" /*extra-version-info*/
        "Enter \".help\" for usage hints.\n",
        sqlite3_libversion(), sqlite3_sourceid()
      );
      if( warnInmemoryDb ){
        printf("Connected to a ");
        printBold("transient in-memory database");
        printf(".\nUse \".open FILENAME\" to reopen on a "
               "persistent database.\n");
      }
      zHistory = getenv("SQLITE_HISTORY");
      if( zHistory ){
        zHistory = strdup(zHistory);
      }else if( (zHome = find_home_dir(0))!=0 ){

        nHistory = strlen30(zHome) + 20;
        if( (zHistory = malloc(nHistory))!=0 ){
          sqlite3_snprintf(nHistory, zHistory,"%s/.sqlite_history", zHome);
        }
      }
      if( zHistory ){ shell_read_history(zHistory); }
#if HAVE_READLINE || HAVE_EDITLINE

**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
** This SQLite extension implements a functions that compute SHA1 hashes.
** Two SQL functions are implemented:
**
**     sha3(X,SIZE)
**     sha3_query(Y,SIZE)
**
** The sha3(X) function computes the SHA3 hash of the input X, or NULL if
** X is NULL.
................................................................................
#  define mkdir(path,mode) _mkdir(path)
#  define lstat(path,buf) stat(path,buf)
#endif
#include <time.h>
#include <errno.h>






#define FSDIR_SCHEMA "(name,mode,mtime,data,path HIDDEN,dir HIDDEN)"








/*
** Set the result stored by context ctx to a blob containing the 
** contents of file zName.
*/
static void readFileContents(sqlite3_context *ctx, const char *zName){
  FILE *in;
................................................................................
static int fsdirColumn(
  sqlite3_vtab_cursor *cur,   /* The cursor */
  sqlite3_context *ctx,       /* First argument to sqlite3_result_...() */
  int i                       /* Which column to return */
){
  fsdir_cursor *pCur = (fsdir_cursor*)cur;
  switch( i ){
    case 0: { /* name */
      sqlite3_result_text(ctx, &pCur->zPath[pCur->nBase], -1, SQLITE_TRANSIENT);
      break;
    }

    case 1: /* mode */
      sqlite3_result_int64(ctx, pCur->sStat.st_mode);
      break;

    case 2: /* mtime */
      sqlite3_result_int64(ctx, pCur->sStat.st_mtime);
      break;

    case 3: { /* data */
      mode_t m = pCur->sStat.st_mode;
      if( S_ISDIR(m) ){
        sqlite3_result_null(ctx);
#if !defined(_WIN32) && !defined(WIN32)
      }else if( S_ISLNK(m) ){
        char aStatic[64];
        char *aBuf = aStatic;
................................................................................
        sqlite3_result_text(ctx, aBuf, n, SQLITE_TRANSIENT);
        if( aBuf!=aStatic ) sqlite3_free(aBuf);
#endif
      }else{
        readFileContents(ctx, pCur->zPath);
      }
    }






  }
  return SQLITE_OK;
}

/*
** Return the rowid for the current row. In this implementation, the
** first row returned is assigned rowid value 1, and each subsequent
................................................................................
static int fsdirEof(sqlite3_vtab_cursor *cur){
  fsdir_cursor *pCur = (fsdir_cursor*)cur;
  return (pCur->zPath==0);
}

/*
** xFilter callback.



*/
static int fsdirFilter(
  sqlite3_vtab_cursor *cur, 
  int idxNum, const char *idxStr,
  int argc, sqlite3_value **argv
){
  const char *zDir = 0;
................................................................................
** that uses the generate_series virtual table.  This routine needs to create
** a query plan for each invocation and compute an estimated cost for that
** plan.
**
** In this implementation idxNum is used to represent the
** query plan.  idxStr is unused.
**
** The query plan is represented by bits in idxNum:
**
**  (1)  start = $value  -- constraint exists
**  (2)  stop = $value   -- constraint exists
**  (4)  step = $value   -- constraint exists
**  (8)  output in descending order
*/
static int fsdirBestIndex(
  sqlite3_vtab *tab,
  sqlite3_index_info *pIdxInfo
){
  int i;                 /* Loop over constraints */
  int idx4 = -1;
  int idx5 = -1;


  const struct sqlite3_index_constraint *pConstraint;

  (void)tab;
  pConstraint = pIdxInfo->aConstraint;
  for(i=0; i<pIdxInfo->nConstraint; i++, pConstraint++){
    if( pConstraint->usable==0 ) continue;
    if( pConstraint->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue;
    if( pConstraint->iColumn==4 ) idx4 = i;

    if( pConstraint->iColumn==5 ) idx5 = i;




  }


















  if( idx4<0 ){
    pIdxInfo->idxNum = 0;


    pIdxInfo->estimatedCost = (double)(((sqlite3_int64)1) << 50);
  }else{
    pIdxInfo->aConstraintUsage[idx4].omit = 1;
    pIdxInfo->aConstraintUsage[idx4].argvIndex = 1;
    if( idx5>=0 ){
      pIdxInfo->aConstraintUsage[idx5].omit = 1;
      pIdxInfo->aConstraintUsage[idx5].argvIndex = 2;
      pIdxInfo->idxNum = 2;
      pIdxInfo->estimatedCost = 10.0;
    }else{
      pIdxInfo->idxNum = 1;
      pIdxInfo->estimatedCost = 100.0;
    }
  }
................................................................................
    0,                         /* xSync */
    0,                         /* xCommit */
    0,                         /* xRollback */
    0,                         /* xFindMethod */
    0,                         /* xRename */
    0,                         /* xSavepoint */
    0,                         /* xRelease */
    0                          /* xRollbackTo */

  };

  int rc = sqlite3_create_module(db, "fsdir", &fsdirModule, 0);
  return rc;
}
#else         /* SQLITE_OMIT_VIRTUALTABLE */
# define fsdirRegister(x) SQLITE_OK
................................................................................
  0,                         /* xSync */
  0,                         /* xCommit */
  0,                         /* xRollback */
  0,                         /* xFindMethod */
  0,                         /* xRename */
  0,                         /* xSavepoint */
  0,                         /* xRelease */
  0                          /* xRollbackTo */

};

#endif /* SQLITE_OMIT_VIRTUALTABLE */

int sqlite3CompletionVtabInit(sqlite3 *db){
  int rc = SQLITE_OK;
#ifndef SQLITE_OMIT_VIRTUALTABLE
................................................................................
** xBestIndex callback.
*/
static int zipfileBestIndex(
  sqlite3_vtab *tab,
  sqlite3_index_info *pIdxInfo
){
  int i;



  for(i=0; i<pIdxInfo->nConstraint; i++){
    const struct sqlite3_index_constraint *pCons = &pIdxInfo->aConstraint[i];

    if( pCons->usable==0 ) continue;

    if( pCons->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue;

    if( pCons->iColumn!=ZIPFILE_F_COLUMN_IDX ) continue;
    break;
  }


  if( i<pIdxInfo->nConstraint ){
    pIdxInfo->aConstraintUsage[i].argvIndex = 1;
    pIdxInfo->aConstraintUsage[i].omit = 1;
    pIdxInfo->estimatedCost = 1000.0;
    pIdxInfo->idxNum = 1;
  }else{
    pIdxInfo->estimatedCost = (double)(((sqlite3_int64)1) << 50);
    pIdxInfo->idxNum = 0;
  }

  return SQLITE_OK;
}

static ZipfileEntry *zipfileNewEntry(const char *zPath){
  ZipfileEntry *pNew;
  pNew = sqlite3_malloc(sizeof(ZipfileEntry));
  if( pNew ){
................................................................................
    0,                            /* xCommit - commit transaction */
    0,                            /* xRollback - rollback transaction */
    0,                            /* xFindFunction - function overloading */
    0,                            /* xRename - rename the table */
    0,                            /* xSavepoint */
    0,                            /* xRelease */
    0,                            /* xRollbackTo */

  };

  return sqlite3_create_module(p->dbv, "expert", &expertModule, (void*)p);
}
/*
** End of virtual table implementation.
*************************************************************************/
................................................................................
#define AUTOEQP_off      0           /* Automatic EXPLAIN QUERY PLAN is off */
#define AUTOEQP_on       1           /* Automatic EQP is on */
#define AUTOEQP_trigger  2           /* On and also show plans for triggers */
#define AUTOEQP_full     3           /* Show full EXPLAIN */

/* Allowed values for ShellState.openMode
*/
#define SHELL_OPEN_UNSPEC     0      /* No open-mode specified */
#define SHELL_OPEN_NORMAL     1      /* Normal database file */
#define SHELL_OPEN_APPENDVFS  2      /* Use appendvfs */
#define SHELL_OPEN_ZIPFILE    3      /* Use the zipfile virtual table */
#define SHELL_OPEN_READONLY   4      /* Open a normal database read-only */


/*
** These are the allowed shellFlgs values
*/
#define SHFLG_Pagecache      0x00000001 /* The --pagecache option is used */
#define SHFLG_Lookaside      0x00000002 /* Lookaside memory is used */
#define SHFLG_Backslash      0x00000004 /* The --backslash option is used */
................................................................................
  if( x!=sz ){
    sqlite3_result_error(context, "could not read back the whole file", -1);
    goto edit_func_end;
  }
  if( bBin ){
    sqlite3_result_blob64(context, p, sz, sqlite3_free);
  }else{
    int i, j;
    if( hasCRNL ){
      /* If the original contains \r\n then do no conversions back to \n */
      j = sz;
    }else{
      /* If the file did not originally contain \r\n then convert any new
      ** \r\n back into \n */
      for(i=j=0; i<sz; i++){
................................................................................
    sqlite3_free(zErr);
    free(zQ2);
  }
  return rc;
}

/*
** Text of a help message






*/

static char zHelp[] =
#if defined(SQLITE_HAVE_ZLIB) && !defined(SQLITE_OMIT_VIRTUALTABLE)
  ".archive ...           Manage SQL archives: \".archive --help\" for details\n"

















#endif
#ifndef SQLITE_OMIT_AUTHORIZATION
  ".auth ON|OFF           Show authorizer callbacks\n"
#endif
  ".backup ?DB? FILE      Backup DB (default \"main\") to FILE\n"

  "                         Add \"--append\" to open using appendvfs.\n"
  ".bail on|off           Stop after hitting an error.  Default OFF\n"
  ".binary on|off         Turn binary output on or off.  Default OFF\n"
  ".cd DIRECTORY          Change the working directory to DIRECTORY\n"
  ".changes on|off        Show number of rows changed by SQL\n"
  ".check GLOB            Fail if output since .testcase does not match\n"
  ".clone NEWDB           Clone data into NEWDB from the existing database\n"
  ".databases             List names and files of attached databases\n"
  ".dbconfig ?op? ?val?   List or change sqlite3_db_config() options\n"
  ".dbinfo ?DB?           Show status information about the database\n"
  ".dump ?TABLE? ...      Dump the database in an SQL text format\n"




  "                         If TABLE specified, only dump tables matching\n"
  "                         LIKE pattern TABLE.\n"
  ".echo on|off           Turn command echo on or off\n"
  ".eqp on|off|full       Enable or disable automatic EXPLAIN QUERY PLAN\n"
  ".excel                 Display the output of next command in a spreadsheet\n"
  ".exit                  Exit this program\n"
  ".expert                EXPERIMENTAL. Suggest indexes for specified queries\n"
/* Because explain mode comes on automatically now, the ".explain" mode
** is removed from the help screen.  It is still supported for legacy, however */
/*".explain ?on|off|auto? Turn EXPLAIN output mode on or off or to automatic\n"*/
  ".fullschema ?--indent? Show schema and the content of sqlite_stat tables\n"
  ".headers on|off        Turn display of headers on or off\n"

  ".help                  Show this message\n"
  ".import FILE TABLE     Import data from FILE into TABLE\n"
#ifndef SQLITE_OMIT_TEST_CONTROL
  ".imposter INDEX TABLE  Create imposter table TABLE on index INDEX\n"
#endif
  ".indexes ?TABLE?       Show names of all indexes\n"
  "                         If TABLE specified, only show indexes for tables\n"
  "                         matching LIKE pattern TABLE.\n"
#ifdef SQLITE_ENABLE_IOTRACE
  ".iotrace FILE          Enable I/O diagnostic logging to FILE\n"
#endif
  ".limit ?LIMIT? ?VAL?   Display or change the value of an SQLITE_LIMIT\n"
  ".lint OPTIONS          Report potential schema issues. Options:\n"

  "                         fkey-indexes     Find missing foreign key indexes\n"
#ifndef SQLITE_OMIT_LOAD_EXTENSION
  ".load FILE ?ENTRY?     Load an extension library\n"
#endif
  ".log FILE|off          Turn logging on or off.  FILE can be stderr/stdout\n"
  ".mode MODE ?TABLE?     Set output mode where MODE is one of:\n"

  "                         ascii    Columns/rows delimited by 0x1F and 0x1E\n"
  "                         csv      Comma-separated values\n"
  "                         column   Left-aligned columns.  (See .width)\n"
  "                         html     HTML <table> code\n"
  "                         insert   SQL insert statements for TABLE\n"
  "                         line     One value per line\n"
  "                         list     Values delimited by \"|\"\n"
  "                         quote    Escape answers as for SQL\n"
  "                         tabs     Tab-separated values\n"
  "                         tcl      TCL list elements\n"
  ".nullvalue STRING      Use STRING in place of NULL values\n"
  ".once (-e|-x|FILE)     Output for the next SQL command only to FILE\n"


  "                         or invoke system text editor (-e) or spreadsheet (-x)\n"

  "                         on the output.\n"
  ".open ?OPTIONS? ?FILE? Close existing database and reopen FILE\n"








  "                         The --new option starts with an empty file\n"
  "                         Other options: --readonly --append --zip\n"
  ".output ?FILE?         Send output to FILE or stdout\n"

  ".print STRING...       Print literal STRING\n"
  ".prompt MAIN CONTINUE  Replace the standard prompts\n"
  ".quit                  Exit this program\n"

  ".read FILENAME         Execute SQL in FILENAME\n"
  ".restore ?DB? FILE     Restore content of DB (default \"main\") from FILE\n"
  ".save FILE             Write in-memory database into FILE\n"
  ".scanstats on|off      Turn sqlite3_stmt_scanstatus() metrics on or off\n"
  ".schema ?PATTERN?      Show the CREATE statements matching PATTERN\n"


  "                          Add --indent for pretty-printing\n"
  ".selftest ?--init?     Run tests defined in the SELFTEST table\n"




  ".separator COL ?ROW?   Change the column separator and optionally the row\n"
  "                         separator for both the output mode and .import\n"
#if defined(SQLITE_ENABLE_SESSION)
  ".session CMD ...       Create or control sessions\n"












#endif
  ".sha3sum ?OPTIONS...?  Compute a SHA3 hash of database content\n"







#ifndef SQLITE_NOHAVE_SYSTEM
  ".shell CMD ARGS...     Run CMD ARGS... in a system shell\n"
#endif
  ".show                  Show the current values for various settings\n"
  ".stats ?on|off?        Show stats or turn stats on or off\n"
#ifndef SQLITE_NOHAVE_SYSTEM
  ".system CMD ARGS...    Run CMD ARGS... in a system shell\n"
#endif
  ".tables ?TABLE?        List names of tables\n"
  "                         If TABLE specified, only list tables matching\n"
  "                         LIKE pattern TABLE.\n"
  ".testcase NAME         Begin redirecting output to 'testcase-out.txt'\n"
  ".timeout MS            Try opening locked tables for MS milliseconds\n"
  ".timer on|off          Turn SQL timer on or off\n"
  ".trace FILE|off        Output each SQL statement as it is run\n"
  ".vfsinfo ?AUX?         Information about the top-level VFS\n"
  ".vfslist               List all available VFSes\n"
  ".vfsname ?AUX?         Print the name of the VFS stack\n"
  ".width NUM1 NUM2 ...   Set column widths for \"column\" mode\n"
  "                         Negative values right-justify\n"

;

#if defined(SQLITE_ENABLE_SESSION)
/*







** Print help information for the ".sessions" command
*/









void session_help(ShellState *p){
  raw_printf(p->out,
    ".session ?NAME? SUBCOMMAND ?ARGS...?\n"
    "If ?NAME? is omitted, the first defined session is used.\n"
    "Subcommands:\n"
    "   attach TABLE             Attach TABLE\n"
    "   changeset FILE           Write a changeset into FILE\n"
    "   close                    Close one session\n"
    "   enable ?BOOLEAN?         Set or query the enable bit\n"
    "   filter GLOB...           Reject tables matching GLOBs\n"
    "   indirect ?BOOLEAN?       Mark or query the indirect status\n"
    "   isempty                  Query whether the session is empty\n"
    "   list                     List currently open session names\n"
    "   open DB NAME             Open a new session on DB\n"
    "   patchset FILE            Write a patchset into FILE\n"
  );






}
#endif











































/* Forward reference */
static int process_input(ShellState *p, FILE *in);

/*
** Read the content of file zName into memory obtained from sqlite3_malloc64()
** and return a pointer to the buffer. The caller is responsible for freeing
................................................................................
  size_t nRead;
  char *pBuf;
  if( in==0 ) return 0;
  fseek(in, 0, SEEK_END);
  nIn = ftell(in);
  rewind(in);
  pBuf = sqlite3_malloc64( nIn+1 );
  if( pBuf==0 ) return 0;
  nRead = fread(pBuf, nIn, 1, in);
  fclose(in);
  if( nRead!=1 ){
    sqlite3_free(pBuf);
    return 0;
  }
  pBuf[nIn] = 0;
................................................................................
  if( f==0 ){
    if( dfltZip && sqlite3_strlike("%.zip",zName,0)==0 ){
       return SHELL_OPEN_ZIPFILE;
    }else{
       return SHELL_OPEN_NORMAL;
    }
  }





  fseek(f, -25, SEEK_END);
  n = fread(zBuf, 25, 1, f);
  if( n==1 && memcmp(zBuf, "Start-Of-SQLite3-", 17)==0 ){
    rc = SHELL_OPEN_APPENDVFS;
  }else{
    fseek(f, -22, SEEK_END);
    n = fread(zBuf, 22, 1, f);
................................................................................
    }
    switch( p->openMode ){
      case SHELL_OPEN_APPENDVFS: {
        sqlite3_open_v2(p->zDbFilename, &p->db, 
           SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE, "apndvfs");
        break;
      }




      case SHELL_OPEN_ZIPFILE: {
        sqlite3_open(":memory:", &p->db);
        break;
      }
      case SHELL_OPEN_READONLY: {
        sqlite3_open_v2(p->zDbFilename, &p->db, SQLITE_OPEN_READONLY, 0);
        break;
................................................................................
#endif
    if( p->openMode==SHELL_OPEN_ZIPFILE ){
      char *zSql = sqlite3_mprintf(
         "CREATE VIRTUAL TABLE zip USING zipfile(%Q);", p->zDbFilename);
      sqlite3_exec(p->db, zSql, 0, 0, 0);
      sqlite3_free(zSql);
    }












  }
}

/*
** Attempt to close the databaes connection.  Report errors.
*/
void close_db(sqlite3 *db){
................................................................................
){
  *ppStmt = 0;
  if( *pRc==SQLITE_OK ){
    va_list ap;
    char *z;
    va_start(ap, zFmt);
    z = sqlite3_vmprintf(zFmt, ap);

    if( z==0 ){
      *pRc = SQLITE_NOMEM;
    }else{
      shellPrepare(db, pRc, z, ppStmt);
      sqlite3_free(z);
    }
  }
................................................................................
  sqlite3 *db;                    /* Database containing the archive */
};

/*
** Print a usage message for the .ar command to stderr and return SQLITE_ERROR.
*/
static int arUsage(FILE *f){
  raw_printf(f,
"\n"
"Usage: .ar [OPTION...] [FILE...]\n"
"The .ar command manages sqlar archives.\n"
"\n"
"Examples:\n"
"  .ar -cf archive.sar foo bar    # Create archive.sar from files foo and bar\n"
"  .ar -tf archive.sar            # List members of archive.sar\n"
"  .ar -xvf archive.sar           # Verbosely extract files from archive.sar\n"
"\n"
"Each command line must feature exactly one command option:\n"
"  -c, --create               Create a new archive\n"
"  -u, --update               Update or add files to an existing archive\n"
"  -t, --list                 List contents of archive\n"
"  -x, --extract              Extract files from archive\n"
"\n"
"And zero or more optional options:\n"
"  -v, --verbose              Print each filename as it is processed\n"
"  -f FILE, --file FILE       Operate on archive FILE (default is current db)\n"
"  -a FILE, --append FILE     Operate on FILE opened using the apndvfs VFS\n"
"  -C DIR, --directory DIR    Change to directory DIR to read/extract files\n"
"  -n, --dryrun               Show the SQL that would have occurred\n"
"\n"
"See also: http://sqlite.org/cli.html#sqlar_archive_support\n"
"\n"
);
  return SQLITE_ERROR;
}

/*
** Print an error message for the .ar command to stderr and return 
** SQLITE_ERROR.
*/
................................................................................
    { "directory", 'C', AR_SWITCH_DIRECTORY, 1 },
    { "dryrun",    'n', AR_SWITCH_DRYRUN,    0 },
  };
  int nSwitch = sizeof(aSwitch) / sizeof(struct ArSwitch);
  struct ArSwitch *pEnd = &aSwitch[nSwitch];

  if( nArg<=1 ){

    return arUsage(stderr);
  }else{
    char *z = azArg[1];
    if( z[0]!='-' ){
      /* Traditional style [tar] invocation */
      int i;
      int iArg = 2;
................................................................................
      utf8_printf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
      rc = 1;
    }
  }else

  if( c=='d' && n>=3 && strncmp(azArg[0], "dbconfig", n)==0 ){
    static const struct DbConfigChoices {const char *zName; int op;} aDbConfig[] = {



        { "enable_fkey",      SQLITE_DBCONFIG_ENABLE_FKEY            },
        { "enable_trigger",   SQLITE_DBCONFIG_ENABLE_TRIGGER         },
        { "fts3_tokenizer",   SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER  },
        { "load_extension",   SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION  },
        { "no_ckpt_on_close", SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE       },
        { "enable_qpsg",      SQLITE_DBCONFIG_ENABLE_QPSG            },
        { "trigger_eqp",      SQLITE_DBCONFIG_TRIGGER_EQP            },
        { "reset_database",   SQLITE_DBCONFIG_RESET_DATABASE         },

    };
    int ii, v;
    open_db(p, 0);
    for(ii=0; ii<ArraySize(aDbConfig); ii++){
      if( nArg>1 && strcmp(azArg[1], aDbConfig[ii].zName)!=0 ) continue;
      if( nArg>=3 ){
        sqlite3_db_config(p->db, aDbConfig[ii].op, booleanValue(azArg[2]), 0);
................................................................................
    }else{
      raw_printf(stderr, "Usage: .headers on|off\n");
      rc = 1;
    }
  }else

  if( c=='h' && strncmp(azArg[0], "help", n)==0 ){



    utf8_printf(p->out, "%s", zHelp);




  }else

  if( c=='i' && strncmp(azArg[0], "import", n)==0 ){
    char *zTable;               /* Insert data into this table */
    char *zFile;                /* Name of file to extra content from */
    sqlite3_stmt *pStmt = NULL; /* A statement */
    int nCol;                   /* Number of columns in the table */
................................................................................
      }else if( optionMatch(z, "zip") ){
        p->openMode = SHELL_OPEN_ZIPFILE;
#endif
      }else if( optionMatch(z, "append") ){
        p->openMode = SHELL_OPEN_APPENDVFS;
      }else if( optionMatch(z, "readonly") ){
        p->openMode = SHELL_OPEN_READONLY;




      }else if( z[0]=='-' ){
        utf8_printf(stderr, "unknown option: %s\n", z);
        rc = 1;
        goto meta_command_exit;
      }
    }
    /* If a filename is specified, try to open it first */
................................................................................
      pSession->nFilter = 0;
      sqlite3session_table_filter(pSession->p, session_filter, pSession);
      p->nSession++;
      pSession->zName = sqlite3_mprintf("%s", zName);
    }else
    /* If no command name matches, show a syntax error */
    session_syntax_error:
    session_help(p);
  }else
#endif

#ifdef SQLITE_DEBUG
  /* Undocumented commands for internal testing.  Subject to change
  ** without notice. */
  if( c=='s' && n>=10 && strncmp(azArg[0], "selftest-", 9)==0 ){
................................................................................
      { "always",             SQLITE_TESTCTRL_ALWAYS,        "BOOLEAN"            },
      { "assert",             SQLITE_TESTCTRL_ASSERT,        "BOOLEAN"            },
    /*{ "benign_malloc_hooks",SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS, ""          },*/
    /*{ "bitvec_test",        SQLITE_TESTCTRL_BITVEC_TEST,   ""                },*/
      { "byteorder",          SQLITE_TESTCTRL_BYTEORDER,     ""                   },
    /*{ "fault_install",      SQLITE_TESTCTRL_FAULT_INSTALL, ""                }, */
      { "imposter",           SQLITE_TESTCTRL_IMPOSTER,   "SCHEMA ON/OFF ROOTPAGE"},

      { "localtime_fault",    SQLITE_TESTCTRL_LOCALTIME_FAULT,"BOOLEAN"           },
      { "never_corrupt",      SQLITE_TESTCTRL_NEVER_CORRUPT, "BOOLEAN"            },
      { "optimizations",      SQLITE_TESTCTRL_OPTIMIZATIONS, "DISABLE-MASK"       },
#ifdef YYCOVERAGE
      { "parser_coverage",    SQLITE_TESTCTRL_PARSER_COVERAGE, ""                 },
#endif
      { "pending_byte",       SQLITE_TESTCTRL_PENDING_BYTE,  "OFFSET  "           },
................................................................................
            isOk = 3;
          }
          break;

        /* sqlite3_test_control(int, int) */
        case SQLITE_TESTCTRL_ASSERT:
        case SQLITE_TESTCTRL_ALWAYS:

          if( nArg==3 ){
            int opt = booleanValue(azArg[2]);
            rc2 = sqlite3_test_control(testctrl, opt);
            isOk = 1;
          }
          break;

................................................................................
/*
** We need a default sqlite3_complete() implementation to use in case
** the shell is compiled with SQLITE_OMIT_COMPLETE.  The default assumes
** any arbitrary text is a complete SQL statement.  This is not very
** user-friendly, but it does seem to work.
*/
#ifdef SQLITE_OMIT_COMPLETE
int sqlite3_complete(const char *zSql){ return 1; }
#endif

/*
** Return true if zSql is a complete SQL statement.  Return false if it
** ends in the middle of a string literal or C-style comment.
*/
static int line_is_complete(char *zSql, int nSql){
................................................................................
      zVfs = cmdline_option_value(argc, argv, ++i);
#ifdef SQLITE_HAVE_ZLIB
    }else if( strcmp(z,"-zip")==0 ){
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif
    }else if( strcmp(z,"-append")==0 ){
      data.openMode = SHELL_OPEN_APPENDVFS;




    }else if( strcmp(z,"-readonly")==0 ){
      data.openMode = SHELL_OPEN_READONLY;
#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB)
    }else if( strncmp(z, "-A",2)==0 ){
      /* All remaining command-line arguments are passed to the ".archive"
      ** command, so ignore them */
      break;
................................................................................
      memcpy(data.colSeparator,",",2);
#ifdef SQLITE_HAVE_ZLIB
    }else if( strcmp(z,"-zip")==0 ){
      data.openMode = SHELL_OPEN_ZIPFILE;
#endif
    }else if( strcmp(z,"-append")==0 ){
      data.openMode = SHELL_OPEN_APPENDVFS;




    }else if( strcmp(z,"-readonly")==0 ){
      data.openMode = SHELL_OPEN_READONLY;
    }else if( strcmp(z,"-ascii")==0 ){
      data.mode = MODE_Ascii;
      sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator,
                       SEP_Unit);
      sqlite3_snprintf(sizeof(data.rowSeparator), data.rowSeparator,
................................................................................
    }
    free(azCmd);
  }else{
    /* Run commands received from standard input
    */
    if( stdin_is_interactive ){
      char *zHome;
      char *zHistory = 0;
      int nHistory;
      printf(
        "SQLite version %s %.19s\n" /*extra-version-info*/
        "Enter \".help\" for usage hints.\n",
        sqlite3_libversion(), sqlite3_sourceid()
      );
      if( warnInmemoryDb ){
        printf("Connected to a ");
        printBold("transient in-memory database");
        printf(".\nUse \".open FILENAME\" to reopen on a "
               "persistent database.\n");
      }



      zHome = find_home_dir(0);
      if( zHome ){
        nHistory = strlen30(zHome) + 20;
        if( (zHistory = malloc(nHistory))!=0 ){
          sqlite3_snprintf(nHistory, zHistory,"%s/.sqlite_history", zHome);
        }
      }
      if( zHistory ){ shell_read_history(zHistory); }
#if HAVE_READLINE || HAVE_EDITLINE

  const char *zCurrent = 0;  /* Current skin */
  int i;                     /* Loop counter */
  Stmt q;
  int seenCurrent = 0;
  int once;

  login_check_credentials();
  if( !g.perm.Admin ){
    login_needed(0);
    return;
  }
  db_begin_transaction();
  zCurrent = getSkin(0);
  for(i=0; i<count(aBuiltinSkin); i++){
    aBuiltinSkin[i].zSQL = getSkin(aBuiltinSkin[i].zLabel);
................................................................................
static const char *skin_file_content(const char *zLabel, const char *zFile){
  const char *zResult;
  if( fossil_strcmp(zLabel, "current")==0 ){
    zResult = db_get(zFile, "");
  }else if( sqlite3_strglob("draft[1-9]", zLabel)==0 ){
    zResult = db_get_mprintf("", "%s-%s", zLabel, zFile);
  }else{
    int i;
    for(i=0; i<2; i++){
      char *zKey = mprintf("skins/%s/%s.txt", zLabel, zFile);
      zResult = builtin_text(zKey);
      fossil_free(zKey);
      if( zResult!=0 ) break;
      zLabel = "default";
    }
  }
  return zResult;
}


/*
** WEBPAGE: setup_skinedit
**
** Edit aspects of a skin determined by the w= query parameter.
** Requires Admin or Setup privileges.
**
**    w=NUM     -- 0=CSS, 1=footer, 2=header, 3=details, 4=js
**    sk=NUM    -- the draft skin number
*/
void setup_skinedit(void){
  static const struct sSkinAddr {
    const char *zFile;
................................................................................
  login_check_credentials();

  /* Figure out which skin we are editing */
  iSkin = atoi(PD("sk","1"));
  if( iSkin<1 || iSkin>9 ) iSkin = 1;

  /* Check that the user is authorized to edit this skin. */
  if( !g.perm.Admin ){
    char *zAllowedEditors = "";
    Glob *pAllowedEditors;
    int isMatch = 0;
    if( login_is_individual() ){
      zAllowedEditors = db_get_mprintf("", "draft%d-users", iSkin);
    }
    if( zAllowedEditors[0] ){
................................................................................
  */
  login_check_credentials();
  if( !login_is_individual() ){
    login_needed(0);
    return;
  }
  zAllowedEditors = db_get_mprintf("", "draft%d-users", iSkin);
  if( g.perm.Admin ){
    isSetup = isEditor = 1;
  }else{
    Glob *pAllowedEditors;
    isSetup = isEditor = 0;
    if( zAllowedEditors[0] ){
      pAllowedEditors = glob_create(zAllowedEditors);
      isEditor = glob_match(pAllowedEditors, g.zLogin);
................................................................................
  @ <p>Repeat <a href='#step4'>step 4</a> and
  @ <a href='#step5'>step 5</a> as many times as necessary to create
  @ a production-ready skin.
  @
  @ <a name='step7'></a>
  @ <h1>Step 7: Publish</h1>
  @
  if( !g.perm.Admin ){
    @ <p>Only administrators are allowed to publish draft skins.  Contact
    @ an administrator to get this "draft%d(iSkin)" skin published.</p>
  }else{
    @ <p>When the draft%d(iSkin) skin is ready for production use,
    @ make it the default scan by clicking the acknowledgements and
    @ pressing the button below:</p>
    @
................................................................................
    @ <p>You will probably need to press Reload on your browser after
    @ publishing the new skin.</p>
  }
  @
  @ <a name='step8'></a>
  @ <h1>Step 8: Cleanup and Undo Actions</h1>
  @
  if( !g.perm.Admin ){
    @ <p>Administrators can optionally save or restore legacy skins, and/or
    @ undo a prior publish.
  }else{
    @ <p>Visit the <a href='%R/setup_skin_admin'>Skin Admin</a> page
    @ for cleanup and recovery actions.
  }
  style_load_one_js_file("skin.js");
  style_footer();
}

  const char *zCurrent = 0;  /* Current skin */
  int i;                     /* Loop counter */
  Stmt q;
  int seenCurrent = 0;
  int once;

  login_check_credentials();
  if( !g.perm.Setup ){
    login_needed(0);
    return;
  }
  db_begin_transaction();
  zCurrent = getSkin(0);
  for(i=0; i<count(aBuiltinSkin); i++){
    aBuiltinSkin[i].zSQL = getSkin(aBuiltinSkin[i].zLabel);
................................................................................
static const char *skin_file_content(const char *zLabel, const char *zFile){
  const char *zResult;
  if( fossil_strcmp(zLabel, "current")==0 ){
    zResult = db_get(zFile, "");
  }else if( sqlite3_strglob("draft[1-9]", zLabel)==0 ){
    zResult = db_get_mprintf("", "%s-%s", zLabel, zFile);
  }else{
    while( 1 ){

      char *zKey = mprintf("skins/%s/%s.txt", zLabel, zFile);
      zResult = builtin_text(zKey);
      fossil_free(zKey);
      if( zResult!=0 || fossil_strcmp(zLabel,"default")==0 ) break;

    }
  }
  return zResult;
}


/*
** WEBPAGE: setup_skinedit
**
** Edit aspects of a skin determined by the w= query parameter.
** Requires Setup privileges.
**
**    w=NUM     -- 0=CSS, 1=footer, 2=header, 3=details, 4=js
**    sk=NUM    -- the draft skin number
*/
void setup_skinedit(void){
  static const struct sSkinAddr {
    const char *zFile;
................................................................................
  login_check_credentials();

  /* Figure out which skin we are editing */
  iSkin = atoi(PD("sk","1"));
  if( iSkin<1 || iSkin>9 ) iSkin = 1;

  /* Check that the user is authorized to edit this skin. */
  if( !g.perm.Setup ){
    char *zAllowedEditors = "";
    Glob *pAllowedEditors;
    int isMatch = 0;
    if( login_is_individual() ){
      zAllowedEditors = db_get_mprintf("", "draft%d-users", iSkin);
    }
    if( zAllowedEditors[0] ){
................................................................................
  */
  login_check_credentials();
  if( !login_is_individual() ){
    login_needed(0);
    return;
  }
  zAllowedEditors = db_get_mprintf("", "draft%d-users", iSkin);
  if( g.perm.Setup ){
    isSetup = isEditor = 1;
  }else{
    Glob *pAllowedEditors;
    isSetup = isEditor = 0;
    if( zAllowedEditors[0] ){
      pAllowedEditors = glob_create(zAllowedEditors);
      isEditor = glob_match(pAllowedEditors, g.zLogin);
................................................................................
  @ <p>Repeat <a href='#step4'>step 4</a> and
  @ <a href='#step5'>step 5</a> as many times as necessary to create
  @ a production-ready skin.
  @
  @ <a name='step7'></a>
  @ <h1>Step 7: Publish</h1>
  @
  if( !g.perm.Setup ){
    @ <p>Only administrators are allowed to publish draft skins.  Contact
    @ an administrator to get this "draft%d(iSkin)" skin published.</p>
  }else{
    @ <p>When the draft%d(iSkin) skin is ready for production use,
    @ make it the default scan by clicking the acknowledgements and
    @ pressing the button below:</p>
    @
................................................................................
    @ <p>You will probably need to press Reload on your browser after
    @ publishing the new skin.</p>
  }
  @
  @ <a name='step8'></a>
  @ <h1>Step 8: Cleanup and Undo Actions</h1>
  @
  if( !g.perm.Setup ){
    @ <p>Administrators can optionally save or restore legacy skins, and/or
    @ undo a prior publish.
  }else{
    @ <p>Visit the <a href='%R/setup_skin_admin'>Skin Admin</a> page
    @ for cleanup and recovery actions.
  }
  style_load_one_js_file("skin.js");
  style_footer();
}

**
** Implementation of SMTP (Simple Mail Transport Protocol) according
** to RFC 5321.
*/
#include "config.h"
#include "smtp.h"
#include <assert.h>
#if (HAVE_DN_EXPAND || HAVE___NS_NAME_UNCOMPRESS || HAVE_NS_NAME_UNCOMPRESS) && \
    (HAVE_NS_PARSERR || HAVE___NS_PARSERR) && !defined(FOSSIL_OMIT_DNS)
#  include <sys/types.h>
#  include <netinet/in.h>
#  if defined(HAVE_BIND_RESOLV_H)
#    include <bind/resolv.h>
#    include <bind/arpa/nameser_compat.h>
#  else
#    include <arpa/nameser.h>
#    include <resolv.h>
#  endif
#  if defined(HAVENS_NAME_UNCOMPRESS) && !defined(dn_expand)
#    define dn_expand ns_name_uncompress
#  endif
#  if defined(HAVE__NS_NAME_UNCOMPRESS) && !defined(dn_expand)
#    define dn_expand __ns_name_uncompress
#  endif
#  define FOSSIL_UNIX_STYLE_DNS 1
#endif
#if defined(_WIN32) && !defined(__MINGW32__) && !defined(__MINGW64__)
#  include <windows.h>
#  include <windns.h>
#  define FOSSIL_WINDOWS_STYLE_DNS 1
#endif
................................................................................
      if( priority<iBestPriority ){
        pBest = p;
        iBestPriority = priority;
      }
    }
  }
  if( pBest ){

    dn_expand(aDns, aDns+nDns, pBest+2, zHostname, sizeof(zHostname));
    return fossil_strdup(zHostname);
  }
  return 0;
#elif defined(FOSSIL_WINDOWS_STYLE_DNS)
  DNS_STATUS status;           /* Return status */
  PDNS_RECORDA pDnsRecord, p;  /* Pointer to DNS_RECORD structure */
  int iBestPriority = 9999999; /* Best priority */
................................................................................
  if( nErr ){
    fossil_print("Number of incorrect emailblob.enref values: %d\n",nErr);
  }
}


/*
** COMMAND: smtpd*
**
** Usage: %fossil smtpd [OPTIONS] REPOSITORY
**
** Begin a SMTP conversation with a client using stdin/stdout.  The
** received email is stored in REPOSITORY.
**
** Options:
................................................................................
** found in the user table's info field, in angle brackets.
*/
static int pop3_login(const char *zUser, char *zPass){
  return login_search_uid(&zUser, zPass) != 0;
}

/*
** COMMAND: pop3d*
**
** Usage: %fossil pop3d [OPTIONS] REPOSITORY
**
** Begin a POP3 conversation with a client using stdin/stdout using
** the mailboxes stored in REPOSITORY.
**
** If launched as root, the process first enters a chroot jail using

**
** Implementation of SMTP (Simple Mail Transport Protocol) according
** to RFC 5321.
*/
#include "config.h"
#include "smtp.h"
#include <assert.h>

#if defined(__linux__) && !defined(FOSSIL_OMIT_DNS)
#  include <sys/types.h>
#  include <netinet/in.h>




#  include <arpa/nameser.h>
#  include <resolv.h>







#  define FOSSIL_UNIX_STYLE_DNS 1
#endif
#if defined(_WIN32) && !defined(__MINGW32__) && !defined(__MINGW64__)
#  include <windows.h>
#  include <windns.h>
#  define FOSSIL_WINDOWS_STYLE_DNS 1
#endif
................................................................................
      if( priority<iBestPriority ){
        pBest = p;
        iBestPriority = priority;
      }
    }
  }
  if( pBest ){
    ns_name_uncompress(aDns, aDns+nDns, pBest+2,
                       zHostname, sizeof(zHostname));
    return fossil_strdup(zHostname);
  }
  return 0;
#elif defined(FOSSIL_WINDOWS_STYLE_DNS)
  DNS_STATUS status;           /* Return status */
  PDNS_RECORDA pDnsRecord, p;  /* Pointer to DNS_RECORD structure */
  int iBestPriority = 9999999; /* Best priority */
................................................................................
  if( nErr ){
    fossil_print("Number of incorrect emailblob.enref values: %d\n",nErr);
  }
}


/*
** COMMAND: smtpd
**
** Usage: %fossil smtpd [OPTIONS] REPOSITORY
**
** Begin a SMTP conversation with a client using stdin/stdout.  The
** received email is stored in REPOSITORY.
**
** Options:
................................................................................
** found in the user table's info field, in angle brackets.
*/
static int pop3_login(const char *zUser, char *zPass){
  return login_search_uid(&zUser, zPass) != 0;
}

/*
** COMMAND: pop3d
**
** Usage: %fossil pop3d [OPTIONS] REPOSITORY
**
** Begin a POP3 conversation with a client using stdin/stdout using
** the mailboxes stored in REPOSITORY.
**
** If launched as root, the process first enters a chroot jail using

/******************************************************************************
** This file is an amalgamation of many separate C source files from SQLite
** version 3.26.0.  By combining all the individual C code files into this
** single large file, the entire code can be compiled as a single translation
** unit.  This allows many compilers to do optimizations that would not be
** possible if the files were compiled separately.  Performance improvements
** of 5% or more are commonly seen when SQLite is compiled as a single
** translation unit.
**
** This file is all you need to compile SQLite.  To use SQLite in other
................................................................................
#endif
#if SQLITE_ENABLE_FTS4
  "ENABLE_FTS4",
#endif
#if SQLITE_ENABLE_FTS5
  "ENABLE_FTS5",
#endif
#if SQLITE_ENABLE_GEOPOLY
  "ENABLE_GEOPOLY",
#endif
#if SQLITE_ENABLE_HIDDEN_COLUMNS
  "ENABLE_HIDDEN_COLUMNS",
#endif
#if SQLITE_ENABLE_ICU
  "ENABLE_ICU",
#endif
#if SQLITE_ENABLE_IOTRACE
................................................................................
#endif
#if SQLITE_ENABLE_MEMSYS5
  "ENABLE_MEMSYS5",
#endif
#if SQLITE_ENABLE_MULTIPLEX
  "ENABLE_MULTIPLEX",
#endif
#if SQLITE_ENABLE_NORMALIZE
  "ENABLE_NORMALIZE",
#endif
#if SQLITE_ENABLE_NULL_TRIM
  "ENABLE_NULL_TRIM",
#endif
#if SQLITE_ENABLE_OVERSIZE_CELL_CHECK
  "ENABLE_OVERSIZE_CELL_CHECK",
#endif
#if SQLITE_ENABLE_PREUPDATE_HOOK
................................................................................
** been edited in any way since it was last checked in, then the last
** four hexadecimal digits of the hash may be modified.
**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.26.0"
#define SQLITE_VERSION_NUMBER 3026000
#define SQLITE_SOURCE_ID      "2018-12-01 12:34:55 bf8c1b2b7a5960c282e543b9c293686dccff272512d08865f4600fb58238b4f9"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
** Existing configuration options might be discontinued.  Applications
** should check the return code from [sqlite3_db_config()] to make sure that
** the call worked.  ^The [sqlite3_db_config()] interface will return a
** non-zero [error code] if a discontinued or unsupported configuration option
** is invoked.
**
** <dl>
** [[SQLITE_DBCONFIG_LOOKASIDE]]
** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt>
** <dd> ^This option takes three additional arguments that determine the 
** [lookaside memory allocator] configuration for the [database connection].
** ^The first argument (the third parameter to [sqlite3_db_config()] is a
** pointer to a memory buffer to use for lookaside memory.
** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb
** may be NULL in which case SQLite will allocate the
................................................................................
** connection is not currently using lookaside memory, or in other words
** when the "current value" returned by
** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero.
** Any attempt to change the lookaside memory configuration when lookaside
** memory is in use leaves the configuration unchanged and returns 
** [SQLITE_BUSY].)^</dd>
**
** [[SQLITE_DBCONFIG_ENABLE_FKEY]]
** <dt>SQLITE_DBCONFIG_ENABLE_FKEY</dt>
** <dd> ^This option is used to enable or disable the enforcement of
** [foreign key constraints].  There should be two additional arguments.
** The first argument is an integer which is 0 to disable FK enforcement,
** positive to enable FK enforcement or negative to leave FK enforcement
** unchanged.  The second parameter is a pointer to an integer into which
** is written 0 or 1 to indicate whether FK enforcement is off or on
** following this call.  The second parameter may be a NULL pointer, in
** which case the FK enforcement setting is not reported back. </dd>
**
** [[SQLITE_DBCONFIG_ENABLE_TRIGGER]]
** <dt>SQLITE_DBCONFIG_ENABLE_TRIGGER</dt>
** <dd> ^This option is used to enable or disable [CREATE TRIGGER | triggers].
** There should be two additional arguments.
** The first argument is an integer which is 0 to disable triggers,
** positive to enable triggers or negative to leave the setting unchanged.
** The second parameter is a pointer to an integer into which
** is written 0 or 1 to indicate whether triggers are disabled or enabled
** following this call.  The second parameter may be a NULL pointer, in
** which case the trigger setting is not reported back. </dd>
**
** [[SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER]]
** <dt>SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER</dt>
** <dd> ^This option is used to enable or disable the two-argument
** version of the [fts3_tokenizer()] function which is part of the
** [FTS3] full-text search engine extension.
** There should be two additional arguments.
** The first argument is an integer which is 0 to disable fts3_tokenizer() or
** positive to enable fts3_tokenizer() or negative to leave the setting
** unchanged.
** The second parameter is a pointer to an integer into which
** is written 0 or 1 to indicate whether fts3_tokenizer is disabled or enabled
** following this call.  The second parameter may be a NULL pointer, in
** which case the new setting is not reported back. </dd>
**
** [[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION]]
** <dt>SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION</dt>
** <dd> ^This option is used to enable or disable the [sqlite3_load_extension()]
** interface independently of the [load_extension()] SQL function.
** The [sqlite3_enable_load_extension()] API enables or disables both the
** C-API [sqlite3_load_extension()] and the SQL function [load_extension()].
** There should be two additional arguments.
** When the first argument to this interface is 1, then only the C-API is
................................................................................
** C-API or the SQL function.
** The second parameter is a pointer to an integer into which
** is written 0 or 1 to indicate whether [sqlite3_load_extension()] interface
** is disabled or enabled following this call.  The second parameter may
** be a NULL pointer, in which case the new setting is not reported back.
** </dd>
**
** [[SQLITE_DBCONFIG_MAINDBNAME]] <dt>SQLITE_DBCONFIG_MAINDBNAME</dt>
** <dd> ^This option is used to change the name of the "main" database
** schema.  ^The sole argument is a pointer to a constant UTF8 string
** which will become the new schema name in place of "main".  ^SQLite
** does not make a copy of the new main schema name string, so the application
** must ensure that the argument passed into this DBCONFIG option is unchanged
** until after the database connection closes.
** </dd>
**
** [[SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE]] 
** <dt>SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE</dt>
** <dd> Usually, when a database in wal mode is closed or detached from a 
** database handle, SQLite checks if this will mean that there are now no 
** connections at all to the database. If so, it performs a checkpoint 
** operation before closing the connection. This option may be used to
** override this behaviour. The first parameter passed to this operation
** is an integer - positive to disable checkpoints-on-close, or zero (the
** default) to enable them, and negative to leave the setting unchanged.
** The second parameter is a pointer to an integer
** into which is written 0 or 1 to indicate whether checkpoints-on-close
** have been disabled - 0 if they are not disabled, 1 if they are.
** </dd>
**
** [[SQLITE_DBCONFIG_ENABLE_QPSG]] <dt>SQLITE_DBCONFIG_ENABLE_QPSG</dt>
** <dd>^(The SQLITE_DBCONFIG_ENABLE_QPSG option activates or deactivates
** the [query planner stability guarantee] (QPSG).  When the QPSG is active,
** a single SQL query statement will always use the same algorithm regardless
** of values of [bound parameters].)^ The QPSG disables some query optimizations
** that look at the values of bound parameters, which can make some queries
** slower.  But the QPSG has the advantage of more predictable behavior.  With
** the QPSG active, SQLite will always use the same query plan in the field as
................................................................................
** The first argument to this setting is an integer which is 0 to disable 
** the QPSG, positive to enable QPSG, or negative to leave the setting
** unchanged. The second parameter is a pointer to an integer into which
** is written 0 or 1 to indicate whether the QPSG is disabled or enabled
** following this call.
** </dd>
**
** [[SQLITE_DBCONFIG_TRIGGER_EQP]] <dt>SQLITE_DBCONFIG_TRIGGER_EQP</dt>
** <dd> By default, the output of EXPLAIN QUERY PLAN commands does not 
** include output for any operations performed by trigger programs. This
** option is used to set or clear (the default) a flag that governs this
** behavior. The first parameter passed to this operation is an integer -
** positive to enable output for trigger programs, or zero to disable it,
** or negative to leave the setting unchanged.
** The second parameter is a pointer to an integer into which is written 
** 0 or 1 to indicate whether output-for-triggers has been disabled - 0 if 
** it is not disabled, 1 if it is.  
** </dd>
**
** [[SQLITE_DBCONFIG_RESET_DATABASE]] <dt>SQLITE_DBCONFIG_RESET_DATABASE</dt>
** <dd> Set the SQLITE_DBCONFIG_RESET_DATABASE flag and then run
** [VACUUM] in order to reset a database back to an empty database
** with no schema and no content. The following process works even for
** a badly corrupted database file:
** <ol>
** <li> If the database connection is newly opened, make sure it has read the
**      database schema by preparing then discarding some query against the
................................................................................
** <li> sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 1, 0);
** <li> [sqlite3_exec](db, "[VACUUM]", 0, 0, 0);
** <li> sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 0, 0);
** </ol>
** Because resetting a database is destructive and irreversible, the
** process requires the use of this obscure API and multiple steps to help
** ensure that it does not happen by accident.
**
** [[SQLITE_DBCONFIG_DEFENSIVE]] <dt>SQLITE_DBCONFIG_DEFENSIVE</dt>
** <dd>The SQLITE_DBCONFIG_DEFENSIVE option activates or deactivates the
** "defensive" flag for a database connection.  When the defensive
** flag is enabled, language features that allow ordinary SQL to 
** deliberately corrupt the database file are disabled.  The disabled
** features include but are not limited to the following:
** <ul>
** <li> The [PRAGMA writable_schema=ON] statement.
** <li> Writes to the [sqlite_dbpage] virtual table.
** <li> Direct writes to [shadow tables].
** </ul>
** </dd>
** </dl>
*/
#define SQLITE_DBCONFIG_MAINDBNAME            1000 /* const char* */
#define SQLITE_DBCONFIG_LOOKASIDE             1001 /* void* int int */
#define SQLITE_DBCONFIG_ENABLE_FKEY           1002 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_TRIGGER        1003 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE      1006 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_QPSG           1007 /* int int* */
#define SQLITE_DBCONFIG_TRIGGER_EQP           1008 /* int int* */
#define SQLITE_DBCONFIG_RESET_DATABASE        1009 /* int int* */
#define SQLITE_DBCONFIG_DEFENSIVE             1010 /* int int* */
#define SQLITE_DBCONFIG_MAX                   1010 /* Largest DBCONFIG */

/*
** CAPI3REF: Enable Or Disable Extended Result Codes
** METHOD: sqlite3
**
** ^The sqlite3_extended_result_codes() routine enables or disables the
** [extended result codes] feature of SQLite. ^The extended result
................................................................................
** probably reused many times.)^ ^Without this flag, [sqlite3_prepare_v3()]
** and [sqlite3_prepare16_v3()] assume that the prepared statement will 
** be used just once or at most a few times and then destroyed using
** [sqlite3_finalize()] relatively soon. The current implementation acts
** on this hint by avoiding the use of [lookaside memory] so as not to
** deplete the limited store of lookaside memory. Future versions of
** SQLite may act on this hint differently.
**
** [[SQLITE_PREPARE_NORMALIZE]] ^(<dt>SQLITE_PREPARE_NORMALIZE</dt>
** <dd>The SQLITE_PREPARE_NORMALIZE flag indicates that a normalized
** representation of the SQL statement should be calculated and then
** associated with the prepared statement, which can be obtained via
** the [sqlite3_normalized_sql()] interface.)^  The semantics used to
** normalize a SQL statement are unspecified and subject to change.
** At a minimum, literal values will be replaced with suitable
** placeholders.
** </dl>
*/
#define SQLITE_PREPARE_PERSISTENT              0x01
#define SQLITE_PREPARE_NORMALIZE               0x02

/*
** CAPI3REF: Compiling An SQL Statement
** KEYWORDS: {SQL statement compiler}
** METHOD: sqlite3
** CONSTRUCTOR: sqlite3_stmt
**
................................................................................
** ^The sqlite3_sql(P) interface returns a pointer to a copy of the UTF-8
** SQL text used to create [prepared statement] P if P was
** created by [sqlite3_prepare_v2()], [sqlite3_prepare_v3()],
** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()].
** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8
** string containing the SQL text of prepared statement P with
** [bound parameters] expanded.
** ^The sqlite3_normalized_sql(P) interface returns a pointer to a UTF-8
** string containing the normalized SQL text of prepared statement P.  The
** semantics used to normalize a SQL statement are unspecified and subject
** to change.  At a minimum, literal values will be replaced with suitable
** placeholders.
**
** ^(For example, if a prepared statement is created using the SQL
** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345
** and parameter :xyz is unbound, then sqlite3_sql() will return
** the original string, "SELECT $abc,:xyz" but sqlite3_expanded_sql()
** will return "SELECT 2345,NULL".)^
**
................................................................................
** is available to hold the result, or if the result would exceed the
** the maximum string length determined by the [SQLITE_LIMIT_LENGTH].
**
** ^The [SQLITE_TRACE_SIZE_LIMIT] compile-time option limits the size of
** bound parameter expansions.  ^The [SQLITE_OMIT_TRACE] compile-time
** option causes sqlite3_expanded_sql() to always return NULL.
**
** ^The strings returned by sqlite3_sql(P) and sqlite3_normalized_sql(P)
** are managed by SQLite and are automatically freed when the prepared
** statement is finalized.
** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
** is obtained from [sqlite3_malloc()] and must be free by the application
** by passing it to [sqlite3_free()].
*/
SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt);
SQLITE_API const char *sqlite3_normalized_sql(sqlite3_stmt *pStmt);

/*
** CAPI3REF: Determine If An SQL Statement Writes The Database
** METHOD: sqlite3_stmt
**
** ^The sqlite3_stmt_readonly(X) interface returns true (non-zero) if
** and only if the [prepared statement] X makes no direct changes to
................................................................................
                       void **ppArg);
  int (*xRename)(sqlite3_vtab *pVtab, const char *zNew);
  /* The methods above are in version 1 of the sqlite_module object. Those 
  ** below are for version 2 and greater. */
  int (*xSavepoint)(sqlite3_vtab *pVTab, int);
  int (*xRelease)(sqlite3_vtab *pVTab, int);
  int (*xRollbackTo)(sqlite3_vtab *pVTab, int);
  /* The methods above are in versions 1 and 2 of the sqlite_module object.
  ** Those below are for version 3 and greater. */
  int (*xShadowName)(const char*);
};

/*
** CAPI3REF: Virtual Table Indexing Information
** KEYWORDS: sqlite3_index_info
**
** The sqlite3_index_info structure and its substructures is used as part
................................................................................
#define SQLITE_TESTCTRL_PENDING_BYTE            11
#define SQLITE_TESTCTRL_ASSERT                  12
#define SQLITE_TESTCTRL_ALWAYS                  13
#define SQLITE_TESTCTRL_RESERVE                 14
#define SQLITE_TESTCTRL_OPTIMIZATIONS           15
#define SQLITE_TESTCTRL_ISKEYWORD               16  /* NOT USED */
#define SQLITE_TESTCTRL_SCRATCHMALLOC           17  /* NOT USED */
#define SQLITE_TESTCTRL_INTERNAL_FUNCTIONS      17
#define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
#define SQLITE_TESTCTRL_EXPLAIN_STMT            19  /* NOT USED */
#define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD    19
#define SQLITE_TESTCTRL_NEVER_CORRUPT           20
#define SQLITE_TESTCTRL_VDBE_COVERAGE           21
#define SQLITE_TESTCTRL_BYTEORDER               22
#define SQLITE_TESTCTRL_ISINIT                  23
................................................................................
** CAPI3REF: Virtual Table Configuration Options
**
** These macros define the various options to the
** [sqlite3_vtab_config()] interface that [virtual table] implementations
** can use to customize and optimize their behavior.
**
** <dl>
** [[SQLITE_VTAB_CONSTRAINT_SUPPORT]]
** <dt>SQLITE_VTAB_CONSTRAINT_SUPPORT
** <dd>Calls of the form
** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported,
** where X is an integer.  If X is zero, then the [virtual table] whose
** [xCreate] or [xConnect] method invoked [sqlite3_vtab_config()] does not
** support constraints.  In this configuration (which is the default) if
** a call to the [xUpdate] method returns [SQLITE_CONSTRAINT], then the entire
................................................................................
  unsigned int *anQueue;            /* Number of pending entries in the queue */
  int nCoord;                       /* Number of coordinates */
  int iLevel;                       /* Level of current node or entry */
  int mxLevel;                      /* The largest iLevel value in the tree */
  sqlite3_int64 iRowid;             /* Rowid for current entry */
  sqlite3_rtree_dbl rParentScore;   /* Score of parent node */
  int eParentWithin;                /* Visibility of parent node */
  int eWithin;                      /* OUT: Visibility */
  sqlite3_rtree_dbl rScore;         /* OUT: Write the score here */
  /* The following fields are only available in 3.8.11 and later */
  sqlite3_value **apSqlParam;       /* Original SQL values of parameters */
};

/*
** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin.
................................................................................
** [sqlite3changeset_invert()] functions, all changes within the changeset 
** that apply to a single table are grouped together. This means that when 
** an application iterates through a changeset using an iterator created by 
** this function, all changes that relate to a single table are visited 
** consecutively. There is no chance that the iterator will visit a change 
** the applies to table X, then one for table Y, and then later on visit 
** another change for table X.
**
** The behavior of sqlite3changeset_start_v2() and its streaming equivalent
** may be modified by passing a combination of
** [SQLITE_CHANGESETSTART_INVERT | supported flags] as the 4th parameter.
**
** Note that the sqlite3changeset_start_v2() API is still <b>experimental</b>
** and therefore subject to change.
*/
SQLITE_API int sqlite3changeset_start(
  sqlite3_changeset_iter **pp,    /* OUT: New changeset iterator handle */
  int nChangeset,                 /* Size of changeset blob in bytes */
  void *pChangeset                /* Pointer to blob containing changeset */
);
SQLITE_API int sqlite3changeset_start_v2(
  sqlite3_changeset_iter **pp,    /* OUT: New changeset iterator handle */
  int nChangeset,                 /* Size of changeset blob in bytes */
  void *pChangeset,               /* Pointer to blob containing changeset */
  int flags                       /* SESSION_CHANGESETSTART_* flags */
);

/*
** CAPI3REF: Flags for sqlite3changeset_start_v2
**
** The following flags may passed via the 4th parameter to
** [sqlite3changeset_start_v2] and [sqlite3changeset_start_v2_strm]:
**
** <dt>SQLITE_CHANGESETAPPLY_INVERT <dd>
**   Invert the changeset while iterating through it. This is equivalent to
**   inverting a changeset using sqlite3changeset_invert() before applying it.
**   It is an error to specify this flag with a patchset.
*/
#define SQLITE_CHANGESETSTART_INVERT        0x0002


/*
** CAPI3REF: Advance A Changeset Iterator
** METHOD: sqlite3_changeset_iter
**
** This function may only be used with iterators created by function
................................................................................
  int(*xConflict)(
    void *pCtx,                   /* Copy of sixth arg to _apply() */
    int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
    sqlite3_changeset_iter *p     /* Handle describing change and conflict */
  ),
  void *pCtx,                     /* First argument passed to xConflict */
  void **ppRebase, int *pnRebase, /* OUT: Rebase data */
  int flags                       /* SESSION_CHANGESETAPPLY_* flags */
);

/*
** CAPI3REF: Flags for sqlite3changeset_apply_v2
**
** The following flags may passed via the 9th parameter to
** [sqlite3changeset_apply_v2] and [sqlite3changeset_apply_v2_strm]:
................................................................................
**   Usually, the sessions module encloses all operations performed by
**   a single call to apply_v2() or apply_v2_strm() in a [SAVEPOINT]. The
**   SAVEPOINT is committed if the changeset or patchset is successfully
**   applied, or rolled back if an error occurs. Specifying this flag
**   causes the sessions module to omit this savepoint. In this case, if the
**   caller has an open transaction or savepoint when apply_v2() is called, 
**   it may revert the partially applied changeset by rolling it back.
**
** <dt>SQLITE_CHANGESETAPPLY_INVERT <dd>
**   Invert the changeset before applying it. This is equivalent to inverting
**   a changeset using sqlite3changeset_invert() before applying it. It is
**   an error to specify this flag with a patchset.
*/
#define SQLITE_CHANGESETAPPLY_NOSAVEPOINT   0x0001
#define SQLITE_CHANGESETAPPLY_INVERT        0x0002

/* 
** CAPI3REF: Constants Passed To The Conflict Handler
**
** Values that may be passed as the second argument to a conflict-handler.
**
** <dl>
................................................................................
  void *pOut
);
SQLITE_API int sqlite3changeset_start_strm(
  sqlite3_changeset_iter **pp,
  int (*xInput)(void *pIn, void *pData, int *pnData),
  void *pIn
);
SQLITE_API int sqlite3changeset_start_v2_strm(
  sqlite3_changeset_iter **pp,
  int (*xInput)(void *pIn, void *pData, int *pnData),
  void *pIn,
  int flags
);
SQLITE_API int sqlite3session_changeset_strm(
  sqlite3_session *pSession,
  int (*xOutput)(void *pOut, const void *pData, int nData),
  void *pOut
);
SQLITE_API int sqlite3session_patchset_strm(
  sqlite3_session *pSession,
................................................................................
  sqlite3_rebaser *pRebaser,
  int (*xInput)(void *pIn, void *pData, int *pnData),
  void *pIn,
  int (*xOutput)(void *pOut, const void *pData, int nData),
  void *pOut
);

/*
** CAPI3REF: Configure global parameters
**
** The sqlite3session_config() interface is used to make global configuration
** changes to the sessions module in order to tune it to the specific needs 
** of the application.
**
** The sqlite3session_config() interface is not threadsafe. If it is invoked
** while any other thread is inside any other sessions method then the
** results are undefined. Furthermore, if it is invoked after any sessions
** related objects have been created, the results are also undefined. 
**
** The first argument to the sqlite3session_config() function must be one
** of the SQLITE_SESSION_CONFIG_XXX constants defined below. The 
** interpretation of the (void*) value passed as the second parameter and
** the effect of calling this function depends on the value of the first
** parameter.
**
** <dl>
** <dt>SQLITE_SESSION_CONFIG_STRMSIZE<dd>
**    By default, the sessions module streaming interfaces attempt to input
**    and output data in approximately 1 KiB chunks. This operand may be used
**    to set and query the value of this configuration setting. The pointer
**    passed as the second argument must point to a value of type (int).
**    If this value is greater than 0, it is used as the new streaming data
**    chunk size for both input and output. Before returning, the (int) value
**    pointed to by pArg is set to the final value of the streaming interface
**    chunk size.
** </dl>
**
** This function returns SQLITE_OK if successful, or an SQLite error code
** otherwise.
*/
SQLITE_API int sqlite3session_config(int op, void *pArg);

/*
** CAPI3REF: Values for sqlite3session_config().
*/
#define SQLITE_SESSION_CONFIG_STRMSIZE 1

/*
** Make sure we can call this stuff from C++.
*/
#if 0
}
#endif
................................................................................

#ifndef SQLITE_OMIT_WAL
SQLITE_PRIVATE   int sqlite3PagerCheckpoint(Pager *pPager, sqlite3*, int, int*, int*);
SQLITE_PRIVATE   int sqlite3PagerWalSupported(Pager *pPager);
SQLITE_PRIVATE   int sqlite3PagerWalCallback(Pager *pPager);
SQLITE_PRIVATE   int sqlite3PagerOpenWal(Pager *pPager, int *pisOpen);
SQLITE_PRIVATE   int sqlite3PagerCloseWal(Pager *pPager, sqlite3*);



# ifdef SQLITE_ENABLE_SNAPSHOT
SQLITE_PRIVATE   int sqlite3PagerSnapshotGet(Pager *pPager, sqlite3_snapshot **ppSnapshot);
SQLITE_PRIVATE   int sqlite3PagerSnapshotOpen(Pager *pPager, sqlite3_snapshot *pSnapshot);
SQLITE_PRIVATE   int sqlite3PagerSnapshotRecover(Pager *pPager);
SQLITE_PRIVATE   int sqlite3PagerSnapshotCheck(Pager *pPager, sqlite3_snapshot *pSnapshot);
SQLITE_PRIVATE   void sqlite3PagerSnapshotUnlock(Pager *pPager);
# endif
#endif

#ifdef SQLITE_DIRECT_OVERFLOW_READ
SQLITE_PRIVATE   int sqlite3PagerDirectReadOk(Pager *pPager, Pgno pgno);

#endif

#ifdef SQLITE_ENABLE_ZIPVFS
SQLITE_PRIVATE   int sqlite3PagerWalFramesize(Pager *pPager);
#endif

/* Functions used to query pager state and configuration. */
................................................................................
/* Return the header size */
SQLITE_PRIVATE int sqlite3HeaderSizePcache(void);
SQLITE_PRIVATE int sqlite3HeaderSizePcache1(void);

/* Number of dirty pages as a percentage of the configured cache size */
SQLITE_PRIVATE int sqlite3PCachePercentDirty(PCache*);

#ifdef SQLITE_DIRECT_OVERFLOW_READ
SQLITE_PRIVATE int sqlite3PCacheIsDirty(PCache *pCache);
#endif

#endif /* _PCACHE_H_ */

/************** End of pcache.h **********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
/************** Include os.h in the middle of sqliteInt.h ********************/
/************** Begin file os.h **********************************************/
/*
................................................................................
};

/*
** A hash table for built-in function definitions.  (Application-defined
** functions use a regular table table from hash.h.)
**
** Hash each FuncDef structure into one of the FuncDefHash.a[] slots.
** Collisions are on the FuncDef.u.pHash chain.  Use the SQLITE_FUNC_HASH()
** macro to compute a hash on the function name.
*/
#define SQLITE_FUNC_HASH_SZ 23
struct FuncDefHash {
  FuncDef *a[SQLITE_FUNC_HASH_SZ];       /* Hash table for functions */
};
#define SQLITE_FUNC_HASH(C,L) (((C)+(L))%SQLITE_FUNC_HASH_SZ)

#ifdef SQLITE_USER_AUTHENTICATION
/*
** Information held in the "sqlite3" database connection object and used
** to manage user authentication.
*/
typedef struct sqlite3_userauth sqlite3_userauth;
................................................................................
  sqlite3_vfs *pVfs;            /* OS Interface */
  struct Vdbe *pVdbe;           /* List of active virtual machines */
  CollSeq *pDfltColl;           /* The default collating sequence (BINARY) */
  sqlite3_mutex *mutex;         /* Connection mutex */
  Db *aDb;                      /* All backends */
  int nDb;                      /* Number of backends currently in use */
  u32 mDbFlags;                 /* flags recording internal state */
  u64 flags;                    /* flags settable by pragmas. See below */
  i64 lastRowid;                /* ROWID of most recent insert (see above) */
  i64 szMmap;                   /* Default mmap_size setting */
  u32 nSchemaLock;              /* Do not reset the schema when non-zero */
  unsigned int openFlags;       /* Flags passed to sqlite3_vfs.xOpen() */
  int errCode;                  /* Most recent error code (SQLITE_*) */
  int errMask;                  /* & result codes with this before returning */
  int iSysErrno;                /* Errno value from last system error */
................................................................................
#define SQLITE_DeferFKs       0x00080000  /* Defer all FK constraints */
#define SQLITE_QueryOnly      0x00100000  /* Disable database changes */
#define SQLITE_CellSizeCk     0x00200000  /* Check btree cell sizes on load */
#define SQLITE_Fts3Tokenizer  0x00400000  /* Enable fts3_tokenizer(2) */
#define SQLITE_EnableQPSG     0x00800000  /* Query Planner Stability Guarantee*/
#define SQLITE_TriggerEQP     0x01000000  /* Show trigger EXPLAIN QUERY PLAN */
#define SQLITE_ResetDatabase  0x02000000  /* Reset the database */
#define SQLITE_LegacyAlter    0x04000000  /* Legacy ALTER TABLE behaviour */
#define SQLITE_NoSchemaError  0x08000000  /* Do not report schema parse errors*/
#define SQLITE_Defensive      0x10000000  /* Input SQL is likely hostile */

/* Flags used only if debugging */
#define HI(X)  ((u64)(X)<<32)
#ifdef SQLITE_DEBUG
#define SQLITE_SqlTrace       HI(0x0001)  /* Debug print SQL as it executes */
#define SQLITE_VdbeListing    HI(0x0002)  /* Debug listings of VDBE progs */
#define SQLITE_VdbeTrace      HI(0x0004)  /* True to trace VDBE execution */
#define SQLITE_VdbeAddopTrace HI(0x0008)  /* Trace sqlite3VdbeAddOp() calls */
#define SQLITE_VdbeEQP        HI(0x0010)  /* Debug EXPLAIN QUERY PLAN */
#endif

/*
** Allowed values for sqlite3.mDbFlags
*/
#define DBFLAG_SchemaChange   0x0001  /* Uncommitted Hash table changes */
#define DBFLAG_PreferBuiltin  0x0002  /* Preference to built-in funcs */
................................................................................
#define SQLITE_FUNC_UNLIKELY 0x0400 /* Built-in unlikely() function */
#define SQLITE_FUNC_CONSTANT 0x0800 /* Constant inputs give a constant output */
#define SQLITE_FUNC_MINMAX   0x1000 /* True for min() and max() aggregates */
#define SQLITE_FUNC_SLOCHNG  0x2000 /* "Slow Change". Value constant during a
                                    ** single query - might change over time */
#define SQLITE_FUNC_AFFINITY 0x4000 /* Built-in affinity() function */
#define SQLITE_FUNC_OFFSET   0x8000 /* Built-in sqlite_offset() function */
#define SQLITE_FUNC_WINDOW   0x00010000 /* Built-in window-only function */
#define SQLITE_FUNC_WINDOW_SIZE 0x20000 /* Requires partition size as arg. */
#define SQLITE_FUNC_INTERNAL 0x00040000 /* For use by NestedParse() only */

/*
** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are
** used to create the initializers for the FuncDef structures.
**
**   FUNCTION(zName, nArg, iArg, bNC, xFunc)
**     Used to create a scalar function definition of a function zName
................................................................................
   (void *)arg, 0, likeFunc, 0, 0, 0, #zName, {0} }
#define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal, xValue) \
  {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL), \
   SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,xValue,0,#zName, {0}}
#define AGGREGATE2(zName, nArg, arg, nc, xStep, xFinal, extraFlags) \
  {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|extraFlags, \
   SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,xFinal,0,#zName, {0}}

#define WAGGREGATE(zName, nArg, arg, nc, xStep, xFinal, xValue, xInverse, f) \
  {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|f, \
   SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,xValue,xInverse,#zName, {0}}
#define INTERNAL_FUNCTION(zName, nArg, xFunc) \
  {nArg, SQLITE_FUNC_INTERNAL|SQLITE_UTF8|SQLITE_FUNC_CONSTANT, \
   0, 0, xFunc, 0, 0, 0, #zName, {0} }


/*
** All current savepoints are stored in a linked list starting at
** sqlite3.pSavepoint. The first element in the list is the most recently
** opened savepoint. Savepoints are added to the list by the vdbe
** OP_Savepoint instruction.
*/
................................................................................
/*
** The schema for each SQL table and view is represented in memory
** by an instance of the following structure.
*/
struct Table {
  char *zName;         /* Name of the table or view */
  Column *aCol;        /* Information about each column */
#ifdef SQLITE_ENABLE_NORMALIZE
  Hash *pColHash;      /* All columns indexed by name */
#endif
  Index *pIndex;       /* List of SQL indexes on this table. */
  Select *pSelect;     /* NULL for tables.  Points to definition if a view. */
  FKey *pFKey;         /* Linked list of all foreign keys in this table */
  char *zColAff;       /* String defining the affinity of each column */
  ExprList *pCheck;    /* All CHECK constraints */
                       /*   ... also used as column name list in a VIEW */
  int tnum;            /* Root BTree page for this table */
................................................................................
#define TF_HasStat1        0x0010    /* nRowLogEst set from sqlite_stat1 */
#define TF_WithoutRowid    0x0020    /* No rowid.  PRIMARY KEY is the key */
#define TF_NoVisibleRowid  0x0040    /* No user-visible "rowid" column */
#define TF_OOOHidden       0x0080    /* Out-of-Order hidden columns */
#define TF_StatsUsed       0x0100    /* Query planner decisions affected by
                                     ** Index.aiRowLogEst[] values */
#define TF_HasNotNull      0x0200    /* Contains NOT NULL constraints */
#define TF_Shadow          0x0400    /* True for a shadow table */

/*
** Test to see whether or not a table is a virtual table.  This is
** done as a macro so that it will be optimized out when virtual
** table support is omitted from the build.
*/
#ifndef SQLITE_OMIT_VIRTUALTABLE
................................................................................
  void *p;          /* Pointer to sampled record */
  int n;            /* Size of record in bytes */
  tRowcnt *anEq;    /* Est. number of rows where the key equals this sample */
  tRowcnt *anLt;    /* Est. number of rows where key is less than this sample */
  tRowcnt *anDLt;   /* Est. number of distinct keys less than this sample */
};

/*
** Possible values to use within the flags argument to sqlite3GetToken().
*/
#define SQLITE_TOKEN_QUOTED    0x1 /* Token is a quoted identifier. */
#define SQLITE_TOKEN_KEYWORD   0x2 /* Token is a keyword. */

/*
** Each token coming out of the lexer is an instance of
** this structure.  Tokens are also used as part of an expression.
**
** The memory that "z" points to is owned by other objects.  Take care
** that the owner of the "z" string does not deallocate the string before
** the Token goes out of scope!  Very often, the "z" points to some place
................................................................................
                         ** TK_SELECT_COLUMN: column of the result vector */
  i16 iAgg;              /* Which entry in pAggInfo->aCol[] or ->aFunc[] */
  i16 iRightJoinTable;   /* If EP_FromJoin, the right table of the join */
  u8 op2;                /* TK_REGISTER: original value of Expr.op
                         ** TK_COLUMN: the value of p5 for OP_Column
                         ** TK_AGG_FUNCTION: nesting depth */
  AggInfo *pAggInfo;     /* Used by TK_AGG_COLUMN and TK_AGG_FUNCTION */
  union {
    Table *pTab;           /* TK_COLUMN: Table containing column. Can be NULL
                           ** for a column of an index on an expression */
    Window *pWin;          /* TK_FUNCTION: Window definition for the func */
  } y;
};

/*
** The following are the meanings of bits in the Expr.flags field.
*/
#define EP_FromJoin  0x000001 /* Originates in ON/USING clause of outer join */
#define EP_Agg       0x000002 /* Contains one or more aggregate functions */
................................................................................
#define EP_NoReduce  0x020000 /* Cannot EXPRDUP_REDUCE this Expr */
#define EP_Unlikely  0x040000 /* unlikely() or likelihood() function */
#define EP_ConstFunc 0x080000 /* A SQLITE_FUNC_CONSTANT or _SLOCHNG function */
#define EP_CanBeNull 0x100000 /* Can be null despite NOT NULL constraint */
#define EP_Subquery  0x200000 /* Tree contains a TK_SELECT operator */
#define EP_Alias     0x400000 /* Is an alias for a result set column */
#define EP_Leaf      0x800000 /* Expr.pLeft, .pRight, .u.pSelect all NULL */
#define EP_WinFunc  0x1000000 /* TK_FUNCTION with Expr.y.pWin set */

/*
** The EP_Propagate mask is a set of properties that automatically propagate
** upwards into parent nodes.
*/
#define EP_Propagate (EP_Collate|EP_Subquery|EP_HasFunc)

................................................................................
**    OPFLAG_SEEKEQ       == BTREE_SEEK_EQ
**    OPFLAG_FORDELETE    == BTREE_FORDELETE
**    OPFLAG_SAVEPOSITION == BTREE_SAVEPOSITION
**    OPFLAG_AUXDELETE    == BTREE_AUXDELETE
*/
#define OPFLAG_NCHANGE       0x01    /* OP_Insert: Set to update db->nChange */
                                     /* Also used in P2 (not P5) of OP_Delete */
#define OPFLAG_NOCHNG        0x01    /* OP_VColumn nochange for UPDATE */
#define OPFLAG_EPHEM         0x01    /* OP_Column: Ephemeral output is ok */
#define OPFLAG_LASTROWID     0x20    /* Set to update db->lastRowid */
#define OPFLAG_ISUPDATE      0x04    /* This OP_Insert is an sql UPDATE */
#define OPFLAG_APPEND        0x08    /* This is likely to be an append */
#define OPFLAG_USESEEKRESULT 0x10    /* Try to avoid a seek in BtreeInsert() */
#define OPFLAG_ISNOOP        0x40    /* OP_Delete does pre-update-hook only */
#define OPFLAG_LENGTHARG     0x40    /* OP_Column only used for length() */
................................................................................
  void (*xVdbeBranch)(void*,unsigned iSrcLine,u8 eThis,u8 eMx);  /* Callback */
  void *pVdbeBranchArg;                                     /* 1st argument */
#endif
#ifndef SQLITE_UNTESTABLE
  int (*xTestCallback)(int);        /* Invoked by sqlite3FaultSim() */
#endif
  int bLocaltimeFault;              /* True to fail localtime() calls */
  int bInternalFunctions;           /* Internal SQL functions are visible */
  int iOnceResetThreshold;          /* When to reset OP_Once counters */
  u32 szSorterRef;                  /* Min size in bytes to use sorter-refs */
};

/*
** This macro is used inside of assert() statements to indicate that
** the assert is only valid on a well-formed database.  Instead of:
................................................................................
SQLITE_PRIVATE int sqlite3IsIdChar(u8);

/*
** Internal function prototypes
*/
SQLITE_PRIVATE int sqlite3StrICmp(const char*,const char*);
SQLITE_PRIVATE int sqlite3Strlen30(const char*);
#define sqlite3Strlen30NN(C) (strlen(C)&0x3fffffff)
SQLITE_PRIVATE char *sqlite3ColumnType(Column*,char*);
#define sqlite3StrNICmp sqlite3_strnicmp

SQLITE_PRIVATE int sqlite3MallocInit(void);
SQLITE_PRIVATE void sqlite3MallocEnd(void);
SQLITE_PRIVATE void *sqlite3Malloc(u64);
SQLITE_PRIVATE void *sqlite3MallocZero(u64);
................................................................................
SQLITE_PRIVATE   void *sqlite3TestTextToPtr(const char*);
#endif

#if defined(SQLITE_DEBUG)
SQLITE_PRIVATE   void sqlite3TreeViewExpr(TreeView*, const Expr*, u8);
SQLITE_PRIVATE   void sqlite3TreeViewBareExprList(TreeView*, const ExprList*, const char*);
SQLITE_PRIVATE   void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*);
SQLITE_PRIVATE   void sqlite3TreeViewSrcList(TreeView*, const SrcList*);
SQLITE_PRIVATE   void sqlite3TreeViewSelect(TreeView*, const Select*, u8);
SQLITE_PRIVATE   void sqlite3TreeViewWith(TreeView*, const With*, u8);
#ifndef SQLITE_OMIT_WINDOWFUNC
SQLITE_PRIVATE   void sqlite3TreeViewWindow(TreeView*, const Window*, u8);
SQLITE_PRIVATE   void sqlite3TreeViewWinFunc(TreeView*, const Window*, u8);
#endif
#endif
................................................................................
#ifdef SQLITE_ENABLE_CURSOR_HINTS
SQLITE_PRIVATE int sqlite3ExprContainsSubquery(Expr*);
#endif
SQLITE_PRIVATE int sqlite3ExprIsInteger(Expr*, int*);
SQLITE_PRIVATE int sqlite3ExprCanBeNull(const Expr*);
SQLITE_PRIVATE int sqlite3ExprNeedsNoAffinityChange(const Expr*, char);
SQLITE_PRIVATE int sqlite3IsRowid(const char*);
#ifdef SQLITE_ENABLE_NORMALIZE
SQLITE_PRIVATE int sqlite3IsRowidN(const char*, int);
#endif
SQLITE_PRIVATE void sqlite3GenerateRowDelete(
    Parse*,Table*,Trigger*,int,int,int,i16,u8,u8,u8,int);
SQLITE_PRIVATE void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int, int*, int);
SQLITE_PRIVATE int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int);
SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse*,int);
SQLITE_PRIVATE int sqlite3ExprReferencesUpdatedColumn(Expr*,int*,int);
SQLITE_PRIVATE void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int,
                                     u8,u8,int,int*,int*,Upsert*);
#ifdef SQLITE_ENABLE_NULL_TRIM
SQLITE_PRIVATE   void sqlite3SetMakeRecordP5(Vdbe*,Table*);
#else
# define sqlite3SetMakeRecordP5(A,B)
#endif
................................................................................
SQLITE_PRIVATE void sqlite3UniqueConstraint(Parse*, int, Index*);
SQLITE_PRIVATE void sqlite3RowidConstraint(Parse*, int, Table*);
SQLITE_PRIVATE Expr *sqlite3ExprDup(sqlite3*,Expr*,int);
SQLITE_PRIVATE ExprList *sqlite3ExprListDup(sqlite3*,ExprList*,int);
SQLITE_PRIVATE SrcList *sqlite3SrcListDup(sqlite3*,SrcList*,int);
SQLITE_PRIVATE IdList *sqlite3IdListDup(sqlite3*,IdList*);
SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3*,Select*,int);
#ifdef SQLITE_ENABLE_NORMALIZE
SQLITE_PRIVATE FuncDef *sqlite3FunctionSearchN(int,const char*,int);
#endif
SQLITE_PRIVATE void sqlite3InsertBuiltinFuncs(FuncDef*,int);
SQLITE_PRIVATE FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,u8,u8);
SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(void);
SQLITE_PRIVATE void sqlite3RegisterDateTimeFunctions(void);
SQLITE_PRIVATE void sqlite3RegisterPerConnectionBuiltinFunctions(sqlite3*);
SQLITE_PRIVATE int sqlite3SafetyCheckOk(sqlite3*);
SQLITE_PRIVATE int sqlite3SafetyCheckSickOrOk(sqlite3*);
................................................................................
SQLITE_PRIVATE CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr);
SQLITE_PRIVATE CollSeq *sqlite3ExprNNCollSeq(Parse *pParse, Expr *pExpr);
SQLITE_PRIVATE int sqlite3ExprCollSeqMatch(Parse*,Expr*,Expr*);
SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*, int);
SQLITE_PRIVATE Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*);
SQLITE_PRIVATE Expr *sqlite3ExprSkipCollate(Expr*);
SQLITE_PRIVATE int sqlite3CheckCollSeq(Parse *, CollSeq *);
SQLITE_PRIVATE int sqlite3WritableSchema(sqlite3*);
SQLITE_PRIVATE int sqlite3CheckObjectName(Parse *, const char *);
SQLITE_PRIVATE void sqlite3VdbeSetChanges(sqlite3 *, int);
SQLITE_PRIVATE int sqlite3AddInt64(i64*,i64);
SQLITE_PRIVATE int sqlite3SubInt64(i64*,i64);
SQLITE_PRIVATE int sqlite3MulInt64(i64*,i64);
SQLITE_PRIVATE int sqlite3AbsInt32(int);
#ifdef SQLITE_ENABLE_8_3_NAMES
................................................................................
#endif
SQLITE_PRIVATE void sqlite3RootPageMoved(sqlite3*, int, int, int);
SQLITE_PRIVATE void sqlite3Reindex(Parse*, Token*, Token*);
SQLITE_PRIVATE void sqlite3AlterFunctions(void);
SQLITE_PRIVATE void sqlite3AlterRenameTable(Parse*, SrcList*, Token*);
SQLITE_PRIVATE void sqlite3AlterRenameColumn(Parse*, SrcList*, Token*, Token*);
SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *, int *);
#ifdef SQLITE_ENABLE_NORMALIZE
SQLITE_PRIVATE int sqlite3GetTokenNormalized(const unsigned char *, int *, int *);
#endif
SQLITE_PRIVATE void sqlite3NestedParse(Parse*, const char*, ...);
SQLITE_PRIVATE void sqlite3ExpirePreparedStatements(sqlite3*, int);
SQLITE_PRIVATE int sqlite3CodeSubselect(Parse*, Expr *, int, int);
SQLITE_PRIVATE void sqlite3SelectPrep(Parse*, Select*, NameContext*);
SQLITE_PRIVATE void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p);
SQLITE_PRIVATE int sqlite3MatchSpanName(const char*, const char*, const char*, const char*);
SQLITE_PRIVATE int sqlite3ResolveExprNames(NameContext*, Expr*);
................................................................................
SQLITE_PRIVATE int sqlite3VtabCallDestroy(sqlite3*, int, const char *);
SQLITE_PRIVATE int sqlite3VtabBegin(sqlite3 *, VTable *);
SQLITE_PRIVATE FuncDef *sqlite3VtabOverloadFunction(sqlite3 *,FuncDef*, int nArg, Expr*);
SQLITE_PRIVATE sqlite3_int64 sqlite3StmtCurrentTime(sqlite3_context*);
SQLITE_PRIVATE int sqlite3VdbeParameterIndex(Vdbe*, const char*, int);
SQLITE_PRIVATE int sqlite3TransferBindings(sqlite3_stmt *, sqlite3_stmt *);
SQLITE_PRIVATE void sqlite3ParserReset(Parse*);
#ifdef SQLITE_ENABLE_NORMALIZE
SQLITE_PRIVATE void sqlite3Normalize(Vdbe*, const char*, int, u8);
#endif
SQLITE_PRIVATE int sqlite3Reprepare(Vdbe*);
SQLITE_PRIVATE void sqlite3ExprListCheckLength(Parse*, ExprList*, const char*);
SQLITE_PRIVATE CollSeq *sqlite3BinaryCompareCollSeq(Parse *, Expr *, Expr *);
SQLITE_PRIVATE int sqlite3TempInMemory(const sqlite3*);
SQLITE_PRIVATE const char *sqlite3JournalModename(int);
#ifndef SQLITE_OMIT_WAL
SQLITE_PRIVATE   int sqlite3Checkpoint(sqlite3*, int, int, int*, int*);
................................................................................
   0,                         /* xVdbeBranch */
   0,                         /* pVbeBranchArg */
#endif
#ifndef SQLITE_UNTESTABLE
   0,                         /* xTestCallback */
#endif
   0,                         /* bLocaltimeFault */
   0,                         /* bInternalFunctions */
   0x7ffffffe,                /* iOnceResetThreshold */
   SQLITE_DEFAULT_SORTERREF_SIZE   /* szSorterRef */
};

/*
** Hash table for global functions - functions common to all
** database connections.  After initialization, this table is
................................................................................
  bft usesStmtJournal:1;  /* True if uses a statement journal */
  bft readOnly:1;         /* True for statements that do not write */
  bft bIsReader:1;        /* True for statements that read */
  yDbMask btreeMask;      /* Bitmask of db->aDb[] entries referenced */
  yDbMask lockMask;       /* Subset of btreeMask that requires a lock */
  u32 aCounter[7];        /* Counters used by sqlite3_stmt_status() */
  char *zSql;             /* Text of the SQL statement that generated this */
#ifdef SQLITE_ENABLE_NORMALIZE
  char *zNormSql;         /* Normalization of the associated SQL statement */
#endif
  void *pFree;            /* Free this when deleting the vdbe */
  VdbeFrame *pFrame;      /* Parent frame */
  VdbeFrame *pDelFrame;   /* List of frame objects to free on VM reset */
  int nFrame;             /* Number of frames in pFrame list */
  u32 expmask;            /* Binding to these vars invalidates VM */
  SubProgram *pProgram;   /* Linked list of all sub-programs used by VM */
  AuxData *pAuxData;      /* Linked list of auxdata allocations */
................................................................................
SQLITE_PRIVATE u32 sqlite3VdbeSerialGet(const unsigned char*, u32, Mem*);
SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(sqlite3*, AuxData**, int, int);

int sqlite2BtreeKeyCompare(BtCursor *, const void *, int, int, int *);
SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare(sqlite3*,VdbeCursor*,UnpackedRecord*,int*);
SQLITE_PRIVATE int sqlite3VdbeIdxRowid(sqlite3*, BtCursor*, i64*);
SQLITE_PRIVATE int sqlite3VdbeExec(Vdbe*);
#ifndef SQLITE_OMIT_EXPLAIN
SQLITE_PRIVATE int sqlite3VdbeList(Vdbe*);
#endif
SQLITE_PRIVATE int sqlite3VdbeHalt(Vdbe*);
SQLITE_PRIVATE int sqlite3VdbeChangeEncoding(Mem *, int);
SQLITE_PRIVATE int sqlite3VdbeMemTooBig(Mem*);
SQLITE_PRIVATE int sqlite3VdbeMemCopy(Mem*, const Mem*);
SQLITE_PRIVATE void sqlite3VdbeMemShallowCopy(Mem*, const Mem*, int);
SQLITE_PRIVATE void sqlite3VdbeMemMove(Mem*, Mem*);
SQLITE_PRIVATE int sqlite3VdbeMemNulTerminate(Mem*);
................................................................................
SQLITE_PRIVATE void sqlite3VdbeMemCast(Mem*,u8,u8);
SQLITE_PRIVATE int sqlite3VdbeMemFromBtree(BtCursor*,u32,u32,Mem*);
SQLITE_PRIVATE void sqlite3VdbeMemRelease(Mem *p);
SQLITE_PRIVATE int sqlite3VdbeMemFinalize(Mem*, FuncDef*);
#ifndef SQLITE_OMIT_WINDOWFUNC
SQLITE_PRIVATE int sqlite3VdbeMemAggValue(Mem*, Mem*, FuncDef*);
#endif
#ifndef SQLITE_OMIT_EXPLAIN
SQLITE_PRIVATE const char *sqlite3OpcodeName(int);
#endif
SQLITE_PRIVATE int sqlite3VdbeMemGrow(Mem *pMem, int n, int preserve);
SQLITE_PRIVATE int sqlite3VdbeMemClearAndResize(Mem *pMem, int n);
SQLITE_PRIVATE int sqlite3VdbeCloseStatement(Vdbe *, int);
#ifdef SQLITE_DEBUG
SQLITE_PRIVATE int sqlite3VdbeFrameIsValid(VdbeFrame*);
#endif
SQLITE_PRIVATE void sqlite3VdbeFrameMemDel(void*);      /* Destructor on Mem */
................................................................................
      sqlite3TreeViewSelect(pView, pCte->pSelect, 0);
      sqlite3TreeViewPop(pView);
    }
    sqlite3TreeViewPop(pView);
  }
}

/*
** Generate a human-readable description of a SrcList object.
*/
SQLITE_PRIVATE void sqlite3TreeViewSrcList(TreeView *pView, const SrcList *pSrc){
  int i;
  for(i=0; i<pSrc->nSrc; i++){
    const struct SrcList_item *pItem = &pSrc->a[i];
    StrAccum x;
    char zLine[100];
    sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0);
    sqlite3_str_appendf(&x, "{%d,*}", pItem->iCursor);
    if( pItem->zDatabase ){
      sqlite3_str_appendf(&x, " %s.%s", pItem->zDatabase, pItem->zName);
    }else if( pItem->zName ){
      sqlite3_str_appendf(&x, " %s", pItem->zName);
    }
    if( pItem->pTab ){
      sqlite3_str_appendf(&x, " tabname=%Q", pItem->pTab->zName);
    }
    if( pItem->zAlias ){
      sqlite3_str_appendf(&x, " (AS %s)", pItem->zAlias);
    }
    if( pItem->fg.jointype & JT_LEFT ){
      sqlite3_str_appendf(&x, " LEFT-JOIN");
    }
    sqlite3StrAccumFinish(&x);
    sqlite3TreeViewItem(pView, zLine, i<pSrc->nSrc-1); 
    if( pItem->pSelect ){
      sqlite3TreeViewSelect(pView, pItem->pSelect, 0);
    }
    if( pItem->fg.isTabFunc ){
      sqlite3TreeViewExprList(pView, pItem->u1.pFuncArg, 0, "func-args:");
    }
    sqlite3TreeViewPop(pView);
  }
}

/*
** Generate a human-readable description of a Select object.
*/
SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 moreToFollow){
  int n = 0;
  int cnt = 0;
................................................................................
      for(pX=p->pWin; pX; pX=pX->pNextWin){
        sqlite3TreeViewWinFunc(pView, pX, pX->pNextWin!=0);
      }
      sqlite3TreeViewPop(pView);
    }
#endif
    if( p->pSrc && p->pSrc->nSrc ){

      pView = sqlite3TreeViewPush(pView, (n--)>0);
      sqlite3TreeViewLine(pView, "FROM");




























      sqlite3TreeViewSrcList(pView, p->pSrc);

      sqlite3TreeViewPop(pView);
    }
    if( p->pWhere ){
      sqlite3TreeViewItem(pView, "WHERE", (n--)>0);
      sqlite3TreeViewExpr(pView, p->pWhere, 0);
      sqlite3TreeViewPop(pView);
    }
................................................................................
      Window *pWin;
      if( ExprHasProperty(pExpr, EP_TokenOnly) ){
        pFarg = 0;
        pWin = 0;
      }else{
        pFarg = pExpr->x.pList;
#ifndef SQLITE_OMIT_WINDOWFUNC
        pWin = pExpr->y.pWin;
#else
        pWin = 0;
#endif 
      }
      if( pExpr->op==TK_AGG_FUNCTION ){
        sqlite3TreeViewLine(pView, "AGG_FUNCTION%d %Q",
                             pExpr->op2, pExpr->u.zToken);
................................................................................
    ** 0x9e3779b1 is 2654435761 which is the closest prime number to
    ** (2**32)*golden_ratio, where golden_ratio = (sqrt(5) - 1)/2. */
    h += sqlite3UpperToLower[c];
    h *= 0x9e3779b1;
  }
  return h;
}
#ifdef SQLITE_ENABLE_NORMALIZE
static unsigned int strHashN(const char *z, int n){
  unsigned int h = 0;
  int i;
  for(i=0; i<n; i++){
    /* Knuth multiplicative hashing.  (Sorting & Searching, p. 510).
    ** 0x9e3779b1 is 2654435761 which is the closest prime number to
    ** (2**32)*golden_ratio, where golden_ratio = (sqrt(5) - 1)/2. */
    h += sqlite3UpperToLower[z[i]];
    h *= 0x9e3779b1;
  }
  return h;
}
#endif /* SQLITE_ENABLE_NORMALIZE */


/* Link pNew element into the hash table pH.  If pEntry!=0 then also
** insert pNew into the pEntry hash bucket.
*/
static void insertElement(
  Hash *pH,              /* The complete hash table */
................................................................................
    if( sqlite3StrICmp(elem->pKey,pKey)==0 ){ 
      return elem;
    }
    elem = elem->next;
  }
  return &nullElement;
}
#ifdef SQLITE_ENABLE_NORMALIZE
static HashElem *findElementWithHashN(
  const Hash *pH,     /* The pH to be searched */
  const char *pKey,   /* The key we are searching for */
  int nKey,           /* Number of key bytes to use */
  unsigned int *pHash /* Write the hash value here */
){
  HashElem *elem;                /* Used to loop thru the element list */
  int count;                     /* Number of elements left to test */
  unsigned int h;                /* The computed hash */
  static HashElem nullElement = { 0, 0, 0, 0 };

  if( pH->ht ){   /*OPTIMIZATION-IF-TRUE*/
    struct _ht *pEntry;
    h = strHashN(pKey, nKey) % pH->htsize;
    pEntry = &pH->ht[h];
    elem = pEntry->chain;
    count = pEntry->count;
  }else{
    h = 0;
    elem = pH->first;
    count = pH->count;
  }
  if( pHash ) *pHash = h;
  while( count-- ){
    assert( elem!=0 );
    if( sqlite3StrNICmp(elem->pKey,pKey,nKey)==0 ){ 
      return elem;
    }
    elem = elem->next;
  }
  return &nullElement;
}
#endif /* SQLITE_ENABLE_NORMALIZE */

/* Remove a single entry from the hash table given a pointer to that
** element and a hash on the element's key.
*/
static void removeElementGivenHash(
  Hash *pH,         /* The pH containing "elem" */
  HashElem* elem,   /* The element to be removed from the pH */
................................................................................
** found, or NULL if there is no match.
*/
SQLITE_PRIVATE void *sqlite3HashFind(const Hash *pH, const char *pKey){
  assert( pH!=0 );
  assert( pKey!=0 );
  return findElementWithHash(pH, pKey, 0)->data;
}
#ifdef SQLITE_ENABLE_NORMALIZE
SQLITE_PRIVATE void *sqlite3HashFindN(const Hash *pH, const char *pKey, int nKey){
  assert( pH!=0 );
  assert( pKey!=0 );
  assert( nKey>=0 );
  return findElementWithHashN(pH, pKey, nKey, 0)->data;
}
#endif /* SQLITE_ENABLE_NORMALIZE */

/* Insert an element into the hash table pH.  The key is pKey
** and the data is "data".
**
** If no element exists with a matching key, then a new
** element is created and NULL is returned.
**
................................................................................

/*
** Allowed values of unixFile.fsFlags
*/
#define SQLITE_FSFLAGS_IS_MSDOS     0x1

/*
** If we are to be thread-safe, include the pthreads header.

*/
#if SQLITE_THREADSAFE
/* # include <pthread.h> */

#endif

/*
** Default permissions when creating a new file
*/
#ifndef SQLITE_DEFAULT_FILE_PERMISSIONS
# define SQLITE_DEFAULT_FILE_PERMISSIONS 0644
................................................................................
  { "lstat",         (sqlite3_syscall_ptr)lstat,          0 },
#else
  { "lstat",         (sqlite3_syscall_ptr)0,              0 },
#endif
#define osLstat      ((int(*)(const char*,struct stat*))aSyscall[27].pCurrent)

#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
# ifdef __ANDROID__
  { "ioctl", (sqlite3_syscall_ptr)(int(*)(int, int, ...))ioctl, 0 },
# else
  { "ioctl",         (sqlite3_syscall_ptr)ioctl,          0 },
# endif
#else
  { "ioctl",         (sqlite3_syscall_ptr)0,              0 },
#endif
#define osIoctl ((int(*)(int,int,...))aSyscall[28].pCurrent)

}; /* End of the overrideable system calls */

................................................................................
  /* WAS:  ino_t ino;   */
  u64 ino;                   /* Inode number */
#endif
};

/*
** An instance of the following structure is allocated for each open
** inode.

**
** A single inode can have multiple file descriptors, so each unixFile
** structure contains a pointer to an instance of this object and this
** object keeps a count of the number of unixFile pointing to it.
**
** Mutex rules:
**
................................................................................
  sem_t *pSem;                    /* Named POSIX semaphore */
  char aSemName[MAX_PATHNAME+2];  /* Name of that semaphore */
#endif
};

/*
** A lists of all unixInodeInfo objects.
**
** Must hold unixBigLock in order to read or write this variable.
*/
static unixInodeInfo *inodeList = 0;  /* All unixInodeInfo objects */

#ifdef SQLITE_DEBUG
/*
** True if the inode mutex (on the unixFile.pFileMutex field) is held, or not.
** This routine is used only within assert() to help verify correct mutex
** usage.
*/
int unixFileMutexHeld(unixFile *pFile){
  assert( pFile->pInode );
  return sqlite3_mutex_held(pFile->pInode->pLockMutex);
}
int unixFileMutexNotheld(unixFile *pFile){
  assert( pFile->pInode );
................................................................................
  }
  pInode->pUnused = 0;
}

/*
** Release a unixInodeInfo structure previously allocated by findInodeInfo().
**
** The global mutex must be held when this routine is called, but the mutex
** on the inode being deleted must NOT be held.
*/
static void releaseInodeInfo(unixFile *pFile){
  unixInodeInfo *pInode = pFile->pInode;
  assert( unixMutexHeld() );
  assert( unixFileMutexNotheld(pFile) );
  if( ALWAYS(pInode) ){
    pInode->nRef--;
................................................................................
}

/*
** Given a file descriptor, locate the unixInodeInfo object that
** describes that file descriptor.  Create a new one if necessary.  The
** return value might be uninitialized if an error occurs.
**
** The global mutex must held when calling this routine.

**
** Return an appropriate error code.
*/
static int findInodeInfo(
  unixFile *pFile,               /* Unix file with file desc used in the key */
  unixInodeInfo **ppInode        /* Return the unixInodeInfo object here */
){
................................................................................
  memset(&fileId, 0, sizeof(fileId));
  fileId.dev = statbuf.st_dev;
#if OS_VXWORKS
  fileId.pId = pFile->pId;
#else
  fileId.ino = (u64)statbuf.st_ino;
#endif
  assert( unixMutexHeld() );
  pInode = inodeList;
  while( pInode && memcmp(&fileId, &pInode->fileId, sizeof(fileId)) ){
    pInode = pInode->pNext;
  }
  if( pInode==0 ){
    pInode = sqlite3_malloc64( sizeof(*pInode) );
    if( pInode==0 ){
................................................................................
      pInode->pLockMutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
      if( pInode->pLockMutex==0 ){
        sqlite3_free(pInode);
        return SQLITE_NOMEM_BKPT;
      }
    }
    pInode->nRef = 1;
    assert( unixMutexHeld() );
    pInode->pNext = inodeList;
    pInode->pPrev = 0;
    if( inodeList ) inodeList->pPrev = pInode;
    inodeList = pInode;
  }else{
    pInode->nRef++;
  }
................................................................................
** unixMutexHeld() must be true when creating or destroying
** this object or while reading or writing the following fields:
**
**      nRef
**
** The following fields are read-only after the object is created:
** 
**      hShm
**      zFilename
**
** Either unixShmNode.pShmMutex must be held or unixShmNode.nRef==0 and
** unixMutexHeld() is true when reading or writing any other field
** in this structure.
*/
struct unixShmNode {
  unixInodeInfo *pInode;     /* unixInodeInfo that owns this SHM node */
  sqlite3_mutex *pShmMutex;  /* Mutex to access this object */
  char *zFilename;           /* Name of the mmapped file */
  int hShm;                  /* Open file descriptor */
  int szRegion;              /* Size of shared-memory regions */
  u16 nRegion;               /* Size of array apRegion */
  u8 isReadonly;             /* True if read-only */
  u8 isUnlocked;             /* True if no DMS lock held */
  char **apRegion;           /* Array of mapped shared-memory regions */
  int nRef;                  /* Number of unixShm objects pointing to this */
  unixShm *pFirst;           /* All unixShm objects pointing to this */
................................................................................
/*
** Structure used internally by this VFS to record the state of an
** open shared memory connection.
**
** The following fields are initialized when this object is created and
** are read-only thereafter:
**
**    unixShm.pShmNode
**    unixShm.id
**
** All other fields are read/write.  The unixShm.pShmNode->pShmMutex must
** be held while accessing any read/write fields.
*/
struct unixShm {
  unixShmNode *pShmNode;     /* The underlying unixShmNode object */
  unixShm *pNext;            /* Next unixShm with the same unixShmNode */
  u8 hasMutex;               /* True if holding the unixShmNode->pShmMutex */
  u8 id;                     /* Id of this connection within its unixShmNode */
  u16 sharedMask;            /* Mask of shared locks held */
  u16 exclMask;              /* Mask of exclusive locks held */
};

/*
** Constants used for locking
................................................................................
){
  unixShmNode *pShmNode; /* Apply locks to this open shared-memory segment */
  struct flock f;        /* The posix advisory locking structure */
  int rc = SQLITE_OK;    /* Result code form fcntl() */

  /* Access to the unixShmNode object is serialized by the caller */
  pShmNode = pFile->pInode->pShmNode;
  assert( pShmNode->nRef==0 || sqlite3_mutex_held(pShmNode->pShmMutex) );
  assert( pShmNode->nRef>0 || unixMutexHeld() );

  /* Shared locks never span more than one byte */
  assert( n==1 || lockType!=F_RDLCK );

  /* Locks are within range */
  assert( n>=1 && n<=SQLITE_SHM_NLOCK );

  if( pShmNode->hShm>=0 ){
    /* Initialize the locking parameters */
    f.l_type = lockType;
    f.l_whence = SEEK_SET;
    f.l_start = ofst;
    f.l_len = n;
    rc = osSetPosixAdvisoryLock(pShmNode->hShm, &f, pFile);
    rc = (rc!=(-1)) ? SQLITE_OK : SQLITE_BUSY;
  }

  /* Update the global lock state and do debug tracing */
#ifdef SQLITE_DEBUG
  { u16 mask;
  OSTRACE(("SHM-LOCK "));
................................................................................
static void unixShmPurge(unixFile *pFd){
  unixShmNode *p = pFd->pInode->pShmNode;
  assert( unixMutexHeld() );
  if( p && ALWAYS(p->nRef==0) ){
    int nShmPerMap = unixShmRegionPerMap();
    int i;
    assert( p->pInode==pFd->pInode );
    sqlite3_mutex_free(p->pShmMutex);
    for(i=0; i<p->nRegion; i+=nShmPerMap){
      if( p->hShm>=0 ){
        osMunmap(p->apRegion[i], p->szRegion);
      }else{
        sqlite3_free(p->apRegion[i]);
      }
    }
    sqlite3_free(p->apRegion);
    if( p->hShm>=0 ){
      robust_close(pFd, p->hShm, __LINE__);
      p->hShm = -1;
    }
    p->pInode->pShmNode = 0;
    sqlite3_free(p);
  }
}

/*
................................................................................
  ** process might open and use the *-shm file without truncating it.
  ** And if the *-shm file has been corrupted by a power failure or
  ** system crash, the database itself may also become corrupt.  */
  lock.l_whence = SEEK_SET;
  lock.l_start = UNIX_SHM_DMS;
  lock.l_len = 1;
  lock.l_type = F_WRLCK;
  if( osFcntl(pShmNode->hShm, F_GETLK, &lock)!=0 ) {
    rc = SQLITE_IOERR_LOCK;
  }else if( lock.l_type==F_UNLCK ){
    if( pShmNode->isReadonly ){
      pShmNode->isUnlocked = 1;
      rc = SQLITE_READONLY_CANTINIT;
    }else{
      rc = unixShmSystemLock(pDbFd, F_WRLCK, UNIX_SHM_DMS, 1);
      /* The first connection to attach must truncate the -shm file.  We
      ** truncate to 3 bytes (an arbitrary small number, less than the
      ** -shm header size) rather than 0 as a system debugging aid, to
      ** help detect if a -shm file truncation is legitimate or is the work
      ** or a rogue process. */
      if( rc==SQLITE_OK && robust_ftruncate(pShmNode->hShm, 3) ){
        rc = unixLogError(SQLITE_IOERR_SHMOPEN,"ftruncate",pShmNode->zFilename);
      }
    }
  }else if( lock.l_type==F_WRLCK ){
    rc = SQLITE_BUSY;
  }

................................................................................
    sqlite3_snprintf(nShmFilename, zShm, 
                     SQLITE_SHM_DIRECTORY "/sqlite-shm-%x-%x",
                     (u32)sStat.st_ino, (u32)sStat.st_dev);
#else
    sqlite3_snprintf(nShmFilename, zShm, "%s-shm", zBasePath);
    sqlite3FileSuffix3(pDbFd->zPath, zShm);
#endif
    pShmNode->hShm = -1;
    pDbFd->pInode->pShmNode = pShmNode;
    pShmNode->pInode = pDbFd->pInode;
    if( sqlite3GlobalConfig.bCoreMutex ){
      pShmNode->pShmMutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
      if( pShmNode->pShmMutex==0 ){
        rc = SQLITE_NOMEM_BKPT;
        goto shm_open_err;
      }
    }

    if( pInode->bProcessLock==0 ){
      if( 0==sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){
        pShmNode->hShm = robust_open(zShm, O_RDWR|O_CREAT,(sStat.st_mode&0777));
      }
      if( pShmNode->hShm<0 ){
        pShmNode->hShm = robust_open(zShm, O_RDONLY, (sStat.st_mode&0777));
        if( pShmNode->hShm<0 ){
          rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zShm);
          goto shm_open_err;
        }
        pShmNode->isReadonly = 1;
      }

      /* If this process is running as root, make sure that the SHM file
      ** is owned by the same user that owns the original database.  Otherwise,
      ** the original owner will not be able to connect.
      */
      robustFchown(pShmNode->hShm, sStat.st_uid, sStat.st_gid);

      rc = unixLockSharedMemory(pDbFd, pShmNode);
      if( rc!=SQLITE_OK && rc!=SQLITE_READONLY_CANTINIT ) goto shm_open_err;
    }
  }

  /* Make the new connection a child of the unixShmNode */
................................................................................
  pDbFd->pShm = p;
  unixLeaveMutex();

  /* The reference count on pShmNode has already been incremented under
  ** the cover of the unixEnterMutex() mutex and the pointer from the
  ** new (struct unixShm) object to the pShmNode has been set. All that is
  ** left to do is to link the new object into the linked list starting
  ** at pShmNode->pFirst. This must be done while holding the
  ** pShmNode->pShmMutex.
  */
  sqlite3_mutex_enter(pShmNode->pShmMutex);
  p->pNext = pShmNode->pFirst;
  pShmNode->pFirst = p;
  sqlite3_mutex_leave(pShmNode->pShmMutex);
  return rc;

  /* Jump here on any error */
shm_open_err:
  unixShmPurge(pDbFd);       /* This call frees pShmNode if required */
  sqlite3_free(p);
  unixLeaveMutex();
................................................................................
  if( pDbFd->pShm==0 ){
    rc = unixOpenSharedMemory(pDbFd);
    if( rc!=SQLITE_OK ) return rc;
  }

  p = pDbFd->pShm;
  pShmNode = p->pShmNode;
  sqlite3_mutex_enter(pShmNode->pShmMutex);
  if( pShmNode->isUnlocked ){
    rc = unixLockSharedMemory(pDbFd, pShmNode);
    if( rc!=SQLITE_OK ) goto shmpage_out;
    pShmNode->isUnlocked = 0;
  }
  assert( szRegion==pShmNode->szRegion || pShmNode->nRegion==0 );
  assert( pShmNode->pInode==pDbFd->pInode );
  assert( pShmNode->hShm>=0 || pDbFd->pInode->bProcessLock==1 );
  assert( pShmNode->hShm<0 || pDbFd->pInode->bProcessLock==0 );

  /* Minimum number of regions required to be mapped. */
  nReqRegion = ((iRegion+nShmPerMap) / nShmPerMap) * nShmPerMap;

  if( pShmNode->nRegion<nReqRegion ){
    char **apNew;                      /* New apRegion[] array */
    int nByte = nReqRegion*szRegion;   /* Minimum required file size */
    struct stat sStat;                 /* Used by fstat() */

    pShmNode->szRegion = szRegion;

    if( pShmNode->hShm>=0 ){
      /* The requested region is not mapped into this processes address space.
      ** Check to see if it has been allocated (i.e. if the wal-index file is
      ** large enough to contain the requested region).
      */
      if( osFstat(pShmNode->hShm, &sStat) ){
        rc = SQLITE_IOERR_SHMSIZE;
        goto shmpage_out;
      }
  
      if( sStat.st_size<nByte ){
        /* The requested memory region does not exist. If bExtend is set to
        ** false, exit early. *pp will be set to NULL and SQLITE_OK returned.
................................................................................
          static const int pgsz = 4096;
          int iPg;

          /* Write to the last byte of each newly allocated or extended page */
          assert( (nByte % pgsz)==0 );
          for(iPg=(sStat.st_size/pgsz); iPg<(nByte/pgsz); iPg++){
            int x = 0;
            if( seekAndWriteFd(pShmNode->hShm, iPg*pgsz + pgsz-1,"",1,&x)!=1 ){
              const char *zFile = pShmNode->zFilename;
              rc = unixLogError(SQLITE_IOERR_SHMSIZE, "write", zFile);
              goto shmpage_out;
            }
          }
        }
      }
................................................................................
      goto shmpage_out;
    }
    pShmNode->apRegion = apNew;
    while( pShmNode->nRegion<nReqRegion ){
      int nMap = szRegion*nShmPerMap;
      int i;
      void *pMem;
      if( pShmNode->hShm>=0 ){
        pMem = osMmap(0, nMap,
            pShmNode->isReadonly ? PROT_READ : PROT_READ|PROT_WRITE, 
            MAP_SHARED, pShmNode->hShm, szRegion*(i64)pShmNode->nRegion
        );
        if( pMem==MAP_FAILED ){
          rc = unixLogError(SQLITE_IOERR_SHMMAP, "mmap", pShmNode->zFilename);
          goto shmpage_out;
        }
      }else{
        pMem = sqlite3_malloc64(nMap);
        if( pMem==0 ){
          rc = SQLITE_NOMEM_BKPT;
          goto shmpage_out;
        }
        memset(pMem, 0, nMap);
      }

      for(i=0; i<nShmPerMap; i++){
        pShmNode->apRegion[pShmNode->nRegion+i] = &((char*)pMem)[szRegion*i];
      }
      pShmNode->nRegion += nShmPerMap;
    }
................................................................................
shmpage_out:
  if( pShmNode->nRegion>iRegion ){
    *pp = pShmNode->apRegion[iRegion];
  }else{
    *pp = 0;
  }
  if( pShmNode->isReadonly && rc==SQLITE_OK ) rc = SQLITE_READONLY;
  sqlite3_mutex_leave(pShmNode->pShmMutex);
  return rc;
}

/*
** Change the lock state for a shared-memory segment.
**
** Note that the relationship between SHAREd and EXCLUSIVE locks is a little
................................................................................
  assert( ofst>=0 && ofst+n<=SQLITE_SHM_NLOCK );
  assert( n>=1 );
  assert( flags==(SQLITE_SHM_LOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED)
       || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE) );
  assert( n==1 || (flags & SQLITE_SHM_EXCLUSIVE)!=0 );
  assert( pShmNode->hShm>=0 || pDbFd->pInode->bProcessLock==1 );
  assert( pShmNode->hShm<0 || pDbFd->pInode->bProcessLock==0 );

  mask = (1<<(ofst+n)) - (1<<ofst);
  assert( n>1 || mask==(1<<ofst) );
  sqlite3_mutex_enter(pShmNode->pShmMutex);
  if( flags & SQLITE_SHM_UNLOCK ){
    u16 allMask = 0; /* Mask of locks held by siblings */

    /* See if any siblings hold this same lock */
    for(pX=pShmNode->pFirst; pX; pX=pX->pNext){
      if( pX==p ) continue;
      assert( (pX->exclMask & (p->exclMask|p->sharedMask))==0 );
................................................................................
      rc = unixShmSystemLock(pDbFd, F_WRLCK, ofst+UNIX_SHM_BASE, n);
      if( rc==SQLITE_OK ){
        assert( (p->sharedMask & mask)==0 );
        p->exclMask |= mask;
      }
    }
  }
  sqlite3_mutex_leave(pShmNode->pShmMutex);
  OSTRACE(("SHM-LOCK shmid-%d, pid-%d got %03x,%03x\n",
           p->id, osGetpid(0), p->sharedMask, p->exclMask));
  return rc;
}

/*
** Implement a memory barrier or memory fence on shared memory.  
................................................................................
  pShmNode = p->pShmNode;

  assert( pShmNode==pDbFd->pInode->pShmNode );
  assert( pShmNode->pInode==pDbFd->pInode );

  /* Remove connection p from the set of connections associated
  ** with pShmNode */
  sqlite3_mutex_enter(pShmNode->pShmMutex);
  for(pp=&pShmNode->pFirst; (*pp)!=p; pp = &(*pp)->pNext){}
  *pp = p->pNext;

  /* Free the connection p */
  sqlite3_free(p);
  pDbFd->pShm = 0;
  sqlite3_mutex_leave(pShmNode->pShmMutex);

  /* If pShmNode->nRef has reached 0, then close the underlying
  ** shared-memory file, too */
  assert( unixFileMutexNotheld(pDbFd) );
  unixEnterMutex();
  assert( pShmNode->nRef>0 );
  pShmNode->nRef--;
  if( pShmNode->nRef==0 ){
    if( deleteFlag && pShmNode->hShm>=0 ){
      osUnlink(pShmNode->zFilename);
    }
    unixShmPurge(pDbFd);
  }
  unixLeaveMutex();

  return SQLITE_OK;
................................................................................
  winceLock local;        /* Locks obtained by this instance of winFile */
  winceLock *shared;      /* Global shared lock memory for the file  */
#endif
#if SQLITE_MAX_MMAP_SIZE>0
  int nFetchOut;                /* Number of outstanding xFetch references */
  HANDLE hMap;                  /* Handle for accessing memory mapping */
  void *pMapRegion;             /* Area memory mapped */
  sqlite3_int64 mmapSize;       /* Size of mapped region */

  sqlite3_int64 mmapSizeMax;    /* Configured FCNTL_MMAP_SIZE value */
#endif
};

/*
** The winVfsAppData structure is used for the pAppData member for all of the
** Win32 VFS variants.
................................................................................
*/
static int winTruncate(sqlite3_file *id, sqlite3_int64 nByte){
  winFile *pFile = (winFile*)id;  /* File handle object */
  int rc = SQLITE_OK;             /* Return code for this function */
  DWORD lastErrno;
#if SQLITE_MAX_MMAP_SIZE>0
  sqlite3_int64 oldMmapSize;
  if( pFile->nFetchOut>0 ){
    /* File truncation is a no-op if there are outstanding memory mapped
    ** pages.  This is because truncating the file means temporarily unmapping
    ** the file, and that might delete memory out from under existing cursors.
    **
    ** This can result in incremental vacuum not truncating the file,
    ** if there is an active read cursor when the incremental vacuum occurs.
    ** No real harm comes of this - the database file is not corrupted,
    ** though some folks might complain that the file is bigger than it
    ** needs to be.
    **
    ** The only feasible work-around is to defer the truncation until after
    ** all references to memory-mapped content are closed.  That is doable,
    ** but involves adding a few branches in the common write code path which
    ** could slow down normal operations slightly.  Hence, we have decided for
    ** now to simply make trancations a no-op if there are pending reads.  We
    ** can maybe revisit this decision in the future.
    */
    return SQLITE_OK;
  }
#endif

  assert( pFile );
  SimulateIOError(return SQLITE_IOERR_TRUNCATE);
  OSTRACE(("TRUNCATE pid=%lu, pFile=%p, file=%p, size=%lld, lock=%d\n",
           osGetCurrentProcessId(), pFile, pFile->h, nByte, pFile->locktype));

................................................................................
/*
** Cleans up the mapped region of the specified file, if any.
*/
#if SQLITE_MAX_MMAP_SIZE>0
static int winUnmapfile(winFile *pFile){
  assert( pFile!=0 );
  OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, hMap=%p, pMapRegion=%p, "
           "mmapSize=%lld, mmapSizeMax=%lld\n",
           osGetCurrentProcessId(), pFile, pFile->hMap, pFile->pMapRegion,
           pFile->mmapSize, pFile->mmapSizeMax));
  if( pFile->pMapRegion ){
    if( !osUnmapViewOfFile(pFile->pMapRegion) ){
      pFile->lastErrno = osGetLastError();
      OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, pMapRegion=%p, "
               "rc=SQLITE_IOERR_MMAP\n", osGetCurrentProcessId(), pFile,
               pFile->pMapRegion));
      return winLogError(SQLITE_IOERR_MMAP, pFile->lastErrno,
                         "winUnmapfile1", pFile->zPath);
    }
    pFile->pMapRegion = 0;
    pFile->mmapSize = 0;

  }
  if( pFile->hMap!=NULL ){
    if( !osCloseHandle(pFile->hMap) ){
      pFile->lastErrno = osGetLastError();
      OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, hMap=%p, rc=SQLITE_IOERR_MMAP\n",
               osGetCurrentProcessId(), pFile, pFile->hMap));
      return winLogError(SQLITE_IOERR_MMAP, pFile->lastErrno,
................................................................................
      /* Log the error, but continue normal operation using xRead/xWrite */
      OSTRACE(("MAP-FILE-MAP pid=%lu, pFile=%p, rc=%s\n",
               osGetCurrentProcessId(), pFd, sqlite3ErrName(rc)));
      return SQLITE_OK;
    }
    pFd->pMapRegion = pNew;
    pFd->mmapSize = nMap;

  }

  OSTRACE(("MAP-FILE pid=%lu, pFile=%p, rc=SQLITE_OK\n",
           osGetCurrentProcessId(), pFd));
  return SQLITE_OK;
}
#endif /* SQLITE_MAX_MMAP_SIZE>0 */
................................................................................
  }
  pFile->lastErrno = NO_ERROR;
  pFile->zPath = zName;
#if SQLITE_MAX_MMAP_SIZE>0
  pFile->hMap = NULL;
  pFile->pMapRegion = 0;
  pFile->mmapSize = 0;

  pFile->mmapSizeMax = sqlite3GlobalConfig.szMmap;
#endif

  OpenCounter(+1);
  return rc;
}

................................................................................
**   such that p was added to the list more recently than p->pDirtyNext.
**   PCache.pDirty points to the first (newest) element in the list and
**   pDirtyTail to the last (oldest).
**
**   The PCache.pSynced variable is used to optimize searching for a dirty
**   page to eject from the cache mid-transaction. It is better to eject
**   a page that does not require a journal sync than one that does. 
**   Therefore, pSynced is maintained so that it *almost* always points
**   to either the oldest page in the pDirty/pDirtyTail list that has a
**   clear PGHDR_NEED_SYNC flag or to a page that is older than this one
**   (so that the right page to eject can be found by following pDirtyPrev
**   pointers).
*/
struct PCache {
  PgHdr *pDirty, *pDirtyTail;         /* List of dirty pages in LRU order */
................................................................................
  PgHdr *pDirty;
  int nDirty = 0;
  int nCache = numberOfCachePages(pCache);
  for(pDirty=pCache->pDirty; pDirty; pDirty=pDirty->pDirtyNext) nDirty++;
  return nCache ? (int)(((i64)nDirty * 100) / nCache) : 0;
}

#ifdef SQLITE_DIRECT_OVERFLOW_READ
/* 
** Return true if there are one or more dirty pages in the cache. Else false.
*/
SQLITE_PRIVATE int sqlite3PCacheIsDirty(PCache *pCache){
  return (pCache->pDirty!=0);
}
#endif

#if defined(SQLITE_CHECK_PAGES) || defined(SQLITE_DEBUG)
/*
** For all dirty pages currently in the cache, invoke the specified
** callback. This is only used if the SQLITE_CHECK_PAGES macro is
** defined.
*/
SQLITE_PRIVATE void sqlite3PcacheIterateDirty(PCache *pCache, void (*xIter)(PgHdr *)){
................................................................................
  PgHdr1 *pNext;                 /* Next in hash table chain */
  PCache1 *pCache;               /* Cache that currently owns this page */
  PgHdr1 *pLruNext;              /* Next in LRU list of unpinned pages */
  PgHdr1 *pLruPrev;              /* Previous in LRU list of unpinned pages */
};

/*
** A page is pinned if it is not on the LRU list.  To be "pinned" means
** that the page is in active use and must not be deallocated.
*/
#define PAGE_IS_PINNED(p)    ((p)->pLruNext==0)
#define PAGE_IS_UNPINNED(p)  ((p)->pLruNext!=0)

/* Each page cache (or PCache) belongs to a PGroup.  A PGroup is a set 
** of one or more PCaches that are able to recycle each other's unpinned
** pages when they are under memory pressure.  A PGroup is an instance of
................................................................................
**
** instead of
**
**   if( pPager->jfd->pMethods ){ ...
*/
#define isOpen(pFd) ((pFd)->pMethods!=0)

#ifdef SQLITE_DIRECT_OVERFLOW_READ
/*

** Return true if page pgno can be read directly from the database file
** by the b-tree layer. This is the case if:
**
**   * the database file is open,
**   * there are no dirty pages in the cache, and
**   * the desired page is not currently in the wal file.
*/

SQLITE_PRIVATE int sqlite3PagerDirectReadOk(Pager *pPager, Pgno pgno){
  if( pPager->fd->pMethods==0 ) return 0;
  if( sqlite3PCacheIsDirty(pPager->pPCache) ) return 0;
#ifndef SQLITE_OMIT_WAL
  if( pPager->pWal ){
    u32 iRead = 0;
    int rc;

    rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iRead);
    return (rc==SQLITE_OK && iRead==0);
  }
#endif
  return 1;
}
#endif

#ifndef SQLITE_OMIT_WAL
# define pagerUseWal(x) ((x)->pWal!=0)
#else
# define pagerUseWal(x) 0
# define pagerRollbackWal(x) 0
# define pagerWalFrames(v,w,x,y) 0
# define pagerOpenWalIfPresent(z) SQLITE_OK
................................................................................
SQLITE_PRIVATE void sqlite3PagerSetCodec(
  Pager *pPager,
  void *(*xCodec)(void*,void*,Pgno,int),
  void (*xCodecSizeChng)(void*,int,int),
  void (*xCodecFree)(void*),
  void *pCodec
){
  if( pPager->xCodecFree ){
    pPager->xCodecFree(pPager->pCodec);
  }else{
    pager_reset(pPager);
  }
  pPager->xCodec = pPager->memDb ? 0 : xCodec;
  pPager->xCodecSizeChng = xCodecSizeChng;
  pPager->xCodecFree = xCodecFree;
  pPager->pCodec = pCodec;
  setGetterMethod(pPager);
  pagerReportSize(pPager);
}
................................................................................
      pBt->usableSize = usableSize;
      pBt->pageSize = pageSize;
      freeTempSpace(pBt);
      rc = sqlite3PagerSetPagesize(pBt->pPager, &pBt->pageSize,
                                   pageSize-usableSize);
      return rc;
    }
    if( sqlite3WritableSchema(pBt->db)==0 && nPage>nPageFile ){
      rc = SQLITE_CORRUPT_BKPT;
      goto page1_init_failed;
    }
    /* EVIDENCE-OF: R-28312-64704 However, the usable size is not allowed to
    ** be less than 480. In other words, if the page size is 512, then the
    ** reserved space size cannot exceed 32. */
    if( usableSize<480 ){
................................................................................
  Pager *pPager = pBt->pPager;
  int rc;

  assert( eType==PTRMAP_OVERFLOW2 || eType==PTRMAP_OVERFLOW1 || 
      eType==PTRMAP_BTREE || eType==PTRMAP_ROOTPAGE );
  assert( sqlite3_mutex_held(pBt->mutex) );
  assert( pDbPage->pBt==pBt );
  if( iDbPage<3 ) return SQLITE_CORRUPT_BKPT;

  /* Move page iDbPage from its current location to page number iFreePage */
  TRACE(("AUTOVACUUM: Moving %d to free page %d (ptr page %d type %d)\n", 
      iDbPage, iFreePage, iPtrPage, eType));
  rc = sqlite3PagerMovepage(pPager, pDbPage->pDbPage, iFreePage, isCommit);
  if( rc!=SQLITE_OK ){
    return rc;
................................................................................
          rc = getOverflowPage(pBt, nextPage, 0, &nextPage);
        }
        offset -= ovflSize;
      }else{
        /* Need to read this page properly. It contains some of the
        ** range of data that is being read (eOp==0) or written (eOp!=0).
        */



        int a = amt;
        if( a + offset > ovflSize ){
          a = ovflSize - offset;
        }

#ifdef SQLITE_DIRECT_OVERFLOW_READ
        /* If all the following are true:
        **
        **   1) this is a read operation, and 
        **   2) data is required from the start of this overflow page, and
        **   3) there are no dirty pages in the page-cache
        **   4) the database is file-backed, and
        **   5) the page is not in the WAL file
        **   6) at least 4 bytes have already been read into the output buffer 
        **
        ** then data can be read directly from the database file into the
        ** output buffer, bypassing the page-cache altogether. This speeds
        ** up loading large records that span many overflow pages.
        */
        if( eOp==0                                             /* (1) */
         && offset==0                                          /* (2) */


         && sqlite3PagerDirectReadOk(pBt->pPager, nextPage)    /* (3,4,5) */
         && &pBuf[-4]>=pBufStart                               /* (6) */
        ){
          sqlite3_file *fd = sqlite3PagerFile(pBt->pPager);
          u8 aSave[4];
          u8 *aWrite = &pBuf[-4];
          assert( aWrite>=pBufStart );                         /* due to (6) */
          memcpy(aSave, aWrite, 4);
          rc = sqlite3OsRead(fd, aWrite, a+4, (i64)pBt->pageSize*(nextPage-1));
          nextPage = get4byte(aWrite);
          memcpy(aWrite, aSave, 4);
................................................................................
  */
  if( fg & MEM_Int ){
    sqlite3_snprintf(nByte, pMem->z, "%lld", pMem->u.i);
  }else{
    assert( fg & MEM_Real );
    sqlite3_snprintf(nByte, pMem->z, "%!.15g", pMem->u.r);
  }
  assert( pMem->z!=0 );
  pMem->n = sqlite3Strlen30NN(pMem->z);
  pMem->enc = SQLITE_UTF8;
  pMem->flags |= MEM_Str|MEM_Term;
  if( bForce ) pMem->flags &= ~(MEM_Int|MEM_Real);
  sqlite3VdbeChangeEncoding(pMem, enc);
  return SQLITE_OK;
}

................................................................................
  if( p==0 ) return;
  p->prepFlags = prepFlags;
  if( (prepFlags & SQLITE_PREPARE_SAVESQL)==0 ){
    p->expmask = 0;
  }
  assert( p->zSql==0 );
  p->zSql = sqlite3DbStrNDup(p->db, z, n);
#ifdef SQLITE_ENABLE_NORMALIZE
  assert( p->zNormSql==0 );
  if( p->zSql && (prepFlags & SQLITE_PREPARE_NORMALIZE)!=0 ){
    sqlite3Normalize(p, p->zSql, n, prepFlags);
    assert( p->zNormSql!=0 || p->db->mallocFailed );
  }
#endif
}

/*
** Swap all content between two VDBE structures.
*/
SQLITE_PRIVATE void sqlite3VdbeSwap(Vdbe *pA, Vdbe *pB){
  Vdbe tmp, *pTmp;
................................................................................
  pB->pNext = pTmp;
  pTmp = pA->pPrev;
  pA->pPrev = pB->pPrev;
  pB->pPrev = pTmp;
  zTmp = pA->zSql;
  pA->zSql = pB->zSql;
  pB->zSql = zTmp;
#ifdef SQLITE_ENABLE_NORMALIZE
  zTmp = pA->zNormSql;
  pA->zNormSql = pB->zNormSql;
  pB->zNormSql = zTmp;
#endif
  pB->expmask = pA->expmask;
  pB->prepFlags = pA->prepFlags;
  memcpy(pB->aCounter, pA->aCounter, sizeof(pB->aCounter));
  pB->aCounter[SQLITE_STMTSTATUS_REPREPARE]++;
}

/*
................................................................................
    releaseMemArray(p->aVar, p->nVar);
    sqlite3DbFree(db, p->pVList);
    sqlite3DbFree(db, p->pFree);
  }
  vdbeFreeOpArray(db, p->aOp, p->nOp);
  sqlite3DbFree(db, p->aColName);
  sqlite3DbFree(db, p->zSql);
#ifdef SQLITE_ENABLE_NORMALIZE
  sqlite3DbFree(db, p->zNormSql);
#endif
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
  {
    int i;
    for(i=0; i<p->nScan; i++){
      sqlite3DbFree(db, p->aScan[i].zName);
    }
    sqlite3DbFree(db, p->aScan);
................................................................................
    return rc;
  }

  /* The index entry must begin with a header size */
  (void)getVarint32((u8*)m.z, szHdr);
  testcase( szHdr==3 );
  testcase( szHdr==m.n );
  testcase( szHdr>0x7fffffff );
  assert( m.n>=0 );
  if( unlikely(szHdr<3 || szHdr>(unsigned)m.n) ){
    goto idx_rowid_corruption;
  }

  /* The last field of the index should be an integer - the ROWID.
  ** Verify that the last entry really is an integer. */
  (void)getVarint32((u8*)&m.z[szHdr-1], typeRowid);
  testcase( typeRowid==1 );
................................................................................
    z = sqlite3VdbeExpandSql(p, zSql);
    sqlite3_mutex_leave(p->db->mutex);
  }
  return z;
#endif
}

#ifdef SQLITE_ENABLE_NORMALIZE
/*
** Return the normalized SQL associated with a prepared statement.
*/
SQLITE_API const char *sqlite3_normalized_sql(sqlite3_stmt *pStmt){
  Vdbe *p = (Vdbe *)pStmt;
  return p ? p->zNormSql : 0;
}
#endif /* SQLITE_ENABLE_NORMALIZE */

#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
/*
** Allocate and populate an UnpackedRecord structure based on the serialized
** record in nKey/pKey. Return a pointer to the new UnpackedRecord structure
** if successful, or a NULL pointer if an OOM error is encountered.
*/
static UnpackedRecord *vdbeUnpackRecord(
................................................................................
  }else{
    /* Rare case of a really large header */
    nVarint = sqlite3VarintLen(nHdr);
    nHdr += nVarint;
    if( nVarint<sqlite3VarintLen(nHdr) ) nHdr++;
  }
  nByte = nHdr+nData;




  /* Make sure the output register has a buffer large enough to store 
  ** the new record. The output register (pOp->p3) is not allowed to
  ** be one of the input registers (because the following call to
  ** sqlite3VdbeMemClearAndResize() could clobber the value before it is used).
  */
  if( nByte+nZero<=pOut->szMalloc ){
    /* The output register is already large enough to hold the record.
    ** No error checks or buffer enlargement is required */
    pOut->z = pOut->zMalloc;
  }else{
    /* Need to make sure that the output is not too big and then enlarge
    ** the output register to hold the full result */
    if( nByte+nZero>db->aLimit[SQLITE_LIMIT_LENGTH] ){
      goto too_big;
    }
    if( sqlite3VdbeMemClearAndResize(pOut, (int)nByte) ){
      goto no_mem;
    }
  }
  zNewRecord = (u8 *)pOut->z;

  /* Write the record */
  i = putVarint32(zNewRecord, nHdr);
  j = nHdr;
  assert( pData0<=pLast );
................................................................................
    db->mDbFlags |= DBFLAG_SchemaChange;
    p->expired = 0;
  }else
#endif
  {
    zMaster = MASTER_NAME;
    initData.db = db;
    initData.iDb = iDb;
    initData.pzErrMsg = &p->zErrMsg;
    initData.mInitFlags = 0;
    zSql = sqlite3MPrintf(db,
       "SELECT name, rootpage, sql FROM '%q'.%s WHERE %s ORDER BY rowid",
       db->aDb[iDb].zDbSName, zMaster, pOp->p4.z);
    if( zSql==0 ){
      rc = SQLITE_NOMEM_BKPT;
................................................................................
** Synopsis: r[P3]=vcolumn(P2)
**
** Store in register P3 the value of the P2-th column of
** the current row of the virtual-table of cursor P1.
**
** If the VColumn opcode is being used to fetch the value of
** an unchanging column during an UPDATE operation, then the P5

** value is OPFLAG_NOCHNG.  This will cause the sqlite3_vtab_nochange()
** function to return true inside the xColumn method of the virtual
** table implementation.  The P5 column might also contain other
** bits (OPFLAG_LENGTHARG or OPFLAG_TYPEOFARG) but those bits are
** unused by OP_VColumn.
*/
case OP_VColumn: {
  sqlite3_vtab *pVtab;
  const sqlite3_module *pModule;
  Mem *pDest;
  sqlite3_context sContext;

................................................................................
    break;
  }
  pVtab = pCur->uc.pVCur->pVtab;
  pModule = pVtab->pModule;
  assert( pModule->xColumn );
  memset(&sContext, 0, sizeof(sContext));
  sContext.pOut = pDest;
  testcase( (pOp->p5 & OPFLAG_NOCHNG)==0 && pOp->p5!=0 );
  if( pOp->p5 & OPFLAG_NOCHNG ){
    sqlite3VdbeMemSetNull(pDest);
    pDest->flags = MEM_Null|MEM_Zero;
    pDest->u.nZero = 0;
  }else{
    MemSetTypeFlag(pDest, MEM_Null);
  }
  rc = pModule->xColumn(pCur->uc.pVCur, &sContext, pOp->p2);
................................................................................
** P4 is a pointer to a virtual table object, an sqlite3_vtab structure.
** This opcode invokes the corresponding xRename method. The value
** in register P1 is passed as the zName argument to the xRename method.
*/
case OP_VRename: {
  sqlite3_vtab *pVtab;
  Mem *pName;
  int isLegacy;
  
  isLegacy = (db->flags & SQLITE_LegacyAlter);
  db->flags |= SQLITE_LegacyAlter;
  pVtab = pOp->p4.pVtab->pVtab;
  pName = &aMem[pOp->p1];
  assert( pVtab->pModule->xRename );
  assert( memIsValid(pName) );
  assert( p->readOnly==0 );
  REGISTER_TRACE(pOp->p1, pName);
  assert( pName->flags & MEM_Str );
  testcase( pName->enc==SQLITE_UTF8 );
  testcase( pName->enc==SQLITE_UTF16BE );
  testcase( pName->enc==SQLITE_UTF16LE );
  rc = sqlite3VdbeChangeEncoding(pName, SQLITE_UTF8);
  if( rc ) goto abort_due_to_error;
  rc = pVtab->pModule->xRename(pVtab, pName->z);
  if( isLegacy==0 ) db->flags &= ~SQLITE_LegacyAlter;
  sqlite3VtabImportErrmsg(p, pVtab);
  p->expired = 0;
  if( rc ) goto abort_due_to_error;
  break;
}
#endif

................................................................................
        continue;
      }else if( ExprHasProperty(pExpr, EP_xIsSelect) ){
        if( sqlite3WalkSelect(pWalker, pExpr->x.pSelect) ) return WRC_Abort;
      }else if( pExpr->x.pList ){
        if( sqlite3WalkExprList(pWalker, pExpr->x.pList) ) return WRC_Abort;
      }
#ifndef SQLITE_OMIT_WINDOWFUNC
      if( ExprHasProperty(pExpr, EP_WinFunc) ){
        Window *pWin = pExpr->y.pWin;
        if( sqlite3WalkExprList(pWalker, pWin->pPartition) ) return WRC_Abort;
        if( sqlite3WalkExprList(pWalker, pWin->pOrderBy) ) return WRC_Abort;
        if( sqlite3WalkExpr(pWalker, pWin->pFilter) ) return WRC_Abort;
      }
#endif
    }
    break;
................................................................................
** expression node refer back to that source column.  The following changes
** are made to pExpr:
**
**    pExpr->iDb           Set the index in db->aDb[] of the database X
**                         (even if X is implied).
**    pExpr->iTable        Set to the cursor number for the table obtained
**                         from pSrcList.
**    pExpr->y.pTab        Points to the Table structure of X.Y (even if
**                         X and/or Y are implied.)
**    pExpr->iColumn       Set to the column number within the table.
**    pExpr->op            Set to TK_COLUMN.
**    pExpr->pLeft         Any expression this points to is deleted
**    pExpr->pRight        Any expression this points to is deleted.
**
** The zDb variable is the name of the database (the "X").  This value may be
................................................................................

  assert( pNC );     /* the name context cannot be NULL. */
  assert( zCol );    /* The Z in X.Y.Z cannot be NULL */
  assert( !ExprHasProperty(pExpr, EP_TokenOnly|EP_Reduced) );

  /* Initialize the node to no-match */
  pExpr->iTable = -1;

  ExprSetVVAProperty(pExpr, EP_NoReduce);

  /* Translate the schema name in zDb into a pointer to the corresponding
  ** schema.  If not found, pSchema will remain NULL and nothing will match
  ** resulting in an appropriate error message toward the end of this routine
  */
  if( zDb ){
................................................................................
        if( zTab ){
          const char *zTabName = pItem->zAlias ? pItem->zAlias : pTab->zName;
          assert( zTabName!=0 );
          if( sqlite3StrICmp(zTabName, zTab)!=0 ){
            continue;
          }
          if( IN_RENAME_OBJECT && pItem->zAlias ){
            sqlite3RenameTokenRemap(pParse, 0, (void*)&pExpr->y.pTab);
          }
        }
        if( 0==(cntTab++) ){
          pMatch = pItem;
        }
        for(j=0, pCol=pTab->aCol; j<pTab->nCol; j++, pCol++){
          if( sqlite3StrICmp(pCol->zName, zCol)==0 ){
................................................................................
            pExpr->iColumn = j==pTab->iPKey ? -1 : (i16)j;
            break;
          }
        }
      }
      if( pMatch ){
        pExpr->iTable = pMatch->iCursor;
        pExpr->y.pTab = pMatch->pTab;
        /* RIGHT JOIN not (yet) supported */
        assert( (pMatch->fg.jointype & JT_RIGHT)==0 );
        if( (pMatch->fg.jointype & JT_LEFT)!=0 ){
          ExprSetProperty(pExpr, EP_CanBeNull);
        }
        pSchema = pExpr->y.pTab->pSchema;
      }
    } /* if( pSrcList ) */

#if !defined(SQLITE_OMIT_TRIGGER) || !defined(SQLITE_OMIT_UPSERT)
    /* If we have not already resolved the name, then maybe 
    ** it is a new.* or old.* trigger argument reference.  Or
    ** maybe it is an excluded.* from an upsert.
................................................................................
        if( iCol<pTab->nCol ){
          cnt++;
#ifndef SQLITE_OMIT_UPSERT
          if( pExpr->iTable==2 ){
            testcase( iCol==(-1) );
            if( IN_RENAME_OBJECT ){
              pExpr->iColumn = iCol;
              pExpr->y.pTab = pTab;
              eNewExprOp = TK_COLUMN;
            }else{
              pExpr->iTable = pNC->uNC.pUpsert->regData + iCol;
              eNewExprOp = TK_REGISTER;
              ExprSetProperty(pExpr, EP_Alias);
            }
          }else
................................................................................
              testcase( iCol==32 );
              pParse->oldmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<<iCol));
            }else{
              testcase( iCol==31 );
              testcase( iCol==32 );
              pParse->newmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<<iCol));
            }
            pExpr->y.pTab = pTab;
            pExpr->iColumn = (i16)iCol;
            eNewExprOp = TK_TRIGGER;
#endif /* SQLITE_OMIT_TRIGGER */
          }
        }
      }
    }
................................................................................
  ** Because no reference was made to outer contexts, the pNC->nRef
  ** fields are not changed in any context.
  */
  if( cnt==0 && zTab==0 ){
    assert( pExpr->op==TK_ID );
    if( ExprHasProperty(pExpr,EP_DblQuoted) ){
      pExpr->op = TK_STRING;
      pExpr->y.pTab = 0;
      return WRC_Prune;
    }
    if( sqlite3ExprIdToTrueFalse(pExpr) ){
      return WRC_Prune;
    }
  }

................................................................................
** Allocate and return a pointer to an expression to load the column iCol
** from datasource iSrc in SrcList pSrc.
*/
SQLITE_PRIVATE Expr *sqlite3CreateColumnExpr(sqlite3 *db, SrcList *pSrc, int iSrc, int iCol){
  Expr *p = sqlite3ExprAlloc(db, TK_COLUMN, 0, 0);
  if( p ){
    struct SrcList_item *pItem = &pSrc->a[iSrc];
    p->y.pTab = pItem->pTab;
    p->iTable = pItem->iCursor;
    if( p->y.pTab->iPKey==iCol ){
      p->iColumn = -1;
    }else{
      p->iColumn = (ynVar)iCol;
      testcase( iCol==BMS );
      testcase( iCol==BMS-1 );
      pItem->colUsed |= ((Bitmask)1)<<(iCol>=BMS ? BMS-1 : iCol);
    }
................................................................................
    case TK_ROW: {
      SrcList *pSrcList = pNC->pSrcList;
      struct SrcList_item *pItem;
      assert( pSrcList && pSrcList->nSrc==1 );
      pItem = pSrcList->a;
      assert( HasRowid(pItem->pTab) && pItem->pTab->pSelect==0 );
      pExpr->op = TK_COLUMN;
      pExpr->y.pTab = pItem->pTab;
      pExpr->iTable = pItem->iCursor;
      pExpr->iColumn = -1;
      pExpr->affinity = SQLITE_AFF_INTEGER;
      break;
    }
#endif /* defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT)
          && !defined(SQLITE_OMIT_SUBQUERY) */
................................................................................
          pLeft = pRight->pLeft;
          pRight = pRight->pRight;
        }
        zTable = pLeft->u.zToken;
        zColumn = pRight->u.zToken;
        if( IN_RENAME_OBJECT ){
          sqlite3RenameTokenRemap(pParse, (void*)pExpr, (void*)pRight);


          sqlite3RenameTokenRemap(pParse, (void*)&pExpr->y.pTab, (void*)pLeft);
        }
      }
      return lookupName(pParse, zDb, zTable, zColumn, pNC, pExpr);
    }

    /* Resolve function names
    */
................................................................................
        if( (pDef->funcFlags & SQLITE_FUNC_CONSTANT)==0 ){
          /* Date/time functions that use 'now', and other functions like
          ** sqlite_version() that might change over time cannot be used
          ** in an index. */
          notValid(pParse, pNC, "non-deterministic functions",
                   NC_IdxExpr|NC_PartIdx);
        }
        if( (pDef->funcFlags & SQLITE_FUNC_INTERNAL)!=0
         && pParse->nested==0
         && sqlite3Config.bInternalFunctions==0
        ){
          /* Internal-use-only functions are disallowed unless the
          ** SQL is being compiled using sqlite3NestedParse() */
          no_such_func = 1;
          pDef = 0;
        }
      }

      if( 0==IN_RENAME_OBJECT ){
#ifndef SQLITE_OMIT_WINDOWFUNC
        assert( is_agg==0 || (pDef->funcFlags & SQLITE_FUNC_MINMAX)
          || (pDef->xValue==0 && pDef->xInverse==0)
          || (pDef->xValue && pDef->xInverse && pDef->xSFunc && pDef->xFinalize)
        );
        if( pDef && pDef->xValue==0 && ExprHasProperty(pExpr, EP_WinFunc) ){
          sqlite3ErrorMsg(pParse, 
              "%.*s() may not be used as a window function", nId, zId
          );
          pNC->nErr++;
        }else if( 
              (is_agg && (pNC->ncFlags & NC_AllowAgg)==0)
           || (is_agg && (pDef->funcFlags&SQLITE_FUNC_WINDOW) && !pExpr->y.pWin)
           || (is_agg && pExpr->y.pWin && (pNC->ncFlags & NC_AllowWin)==0)
        ){
          const char *zType;
          if( (pDef->funcFlags & SQLITE_FUNC_WINDOW) || pExpr->y.pWin ){
            zType = "window";
          }else{
            zType = "aggregate";
          }
          sqlite3ErrorMsg(pParse, "misuse of %s function %.*s()",zType,nId,zId);
          pNC->nErr++;
          is_agg = 0;
................................................................................
        }else if( wrong_num_args ){
          sqlite3ErrorMsg(pParse,"wrong number of arguments to function %.*s()",
               nId, zId);
          pNC->nErr++;
        }
        if( is_agg ){
#ifndef SQLITE_OMIT_WINDOWFUNC
          pNC->ncFlags &= ~(pExpr->y.pWin ? NC_AllowWin : NC_AllowAgg);
#else
          pNC->ncFlags &= ~NC_AllowAgg;
#endif
        }
      }
      sqlite3WalkExprList(pWalker, pList);
      if( is_agg ){
#ifndef SQLITE_OMIT_WINDOWFUNC
        if( pExpr->y.pWin ){
          Select *pSel = pNC->pWinSelect;
          sqlite3WalkExprList(pWalker, pExpr->y.pWin->pPartition);
          sqlite3WalkExprList(pWalker, pExpr->y.pWin->pOrderBy);
          sqlite3WalkExpr(pWalker, pExpr->y.pWin->pFilter);
          sqlite3WindowUpdate(pParse, pSel->pWinDefn, pExpr->y.pWin, pDef);
          if( 0==pSel->pWin 
           || 0==sqlite3WindowCompare(pParse, pSel->pWin, pExpr->y.pWin) 
          ){
            pExpr->y.pWin->pNextWin = pSel->pWin;
            pSel->pWin = pExpr->y.pWin;
          }
          pNC->ncFlags |= NC_AllowWin;
        }else
#endif /* SQLITE_OMIT_WINDOWFUNC */
        {
          NameContext *pNC2 = pNC;
          pExpr->op = TK_AGG_FUNCTION;
................................................................................
    pItem->u.x.iOrderByCol = 0;
    if( sqlite3ResolveExprNames(pNC, pE) ){
      return 1;
    }
    for(j=0; j<pSelect->pEList->nExpr; j++){
      if( sqlite3ExprCompare(0, pE, pSelect->pEList->a[j].pExpr, -1)==0 ){
#ifndef SQLITE_OMIT_WINDOWFUNC
        if( ExprHasProperty(pE, EP_WinFunc) ){
          /* Since this window function is being changed into a reference
          ** to the same window function the result set, remove the instance
          ** of this window function from the Select.pWin list. */
          Window **pp;
          for(pp=&pSelect->pWin; *pp; pp=&(*pp)->pNextWin){
            if( *pp==pE->y.pWin ){
              *pp = (*pp)->pNextWin;
            }    
          }
        }
#endif
        pItem->u.x.iOrderByCol = j+1;
      }
................................................................................
  if( op==TK_REGISTER ) op = pExpr->op2;
#ifndef SQLITE_OMIT_CAST
  if( op==TK_CAST ){
    assert( !ExprHasProperty(pExpr, EP_IntValue) );
    return sqlite3AffinityType(pExpr->u.zToken, 0);
  }
#endif
  if( (op==TK_AGG_COLUMN || op==TK_COLUMN) && pExpr->y.pTab ){
    return sqlite3TableColumnAffinity(pExpr->y.pTab, pExpr->iColumn);
  }
  if( op==TK_SELECT_COLUMN ){
    assert( pExpr->pLeft->flags&EP_xIsSelect );
    return sqlite3ExprAffinity(
        pExpr->pLeft->x.pSelect->pEList->a[pExpr->iColumn].pExpr
    );
  }
................................................................................
  CollSeq *pColl = 0;
  Expr *p = pExpr;
  while( p ){
    int op = p->op;
    if( p->flags & EP_Generic ) break;
    if( (op==TK_AGG_COLUMN || op==TK_COLUMN
          || op==TK_REGISTER || op==TK_TRIGGER)
     && p->y.pTab!=0
    ){
      /* op==TK_REGISTER && p->y.pTab!=0 happens when pExpr was originally
      ** a TK_COLUMN but was previously evaluated and cached in a register */
      int j = p->iColumn;
      if( j>=0 ){
        const char *zColl = p->y.pTab->aCol[j].zColl;
        pColl = sqlite3FindCollSeq(db, ENC(db), zColl, 0);
      }
      break;
    }
    if( op==TK_CAST || op==TK_UPLUS ){
      p = p->pLeft;
      continue;
................................................................................
/*
** Recursively delete an expression tree.
*/
static SQLITE_NOINLINE void sqlite3ExprDeleteNN(sqlite3 *db, Expr *p){
  assert( p!=0 );
  /* Sanity check: Assert that the IntValue is non-negative if it exists */
  assert( !ExprHasProperty(p, EP_IntValue) || p->u.iValue>=0 );

  assert( !ExprHasProperty(p, EP_WinFunc) || p->y.pWin!=0 || db->mallocFailed );
  assert( p->op!=TK_FUNCTION || ExprHasProperty(p, EP_TokenOnly|EP_Reduced)
          || p->y.pWin==0 || ExprHasProperty(p, EP_WinFunc) );
#ifdef SQLITE_DEBUG
  if( ExprHasProperty(p, EP_Leaf) && !ExprHasProperty(p, EP_TokenOnly) ){
    assert( p->pLeft==0 );
    assert( p->pRight==0 );
    assert( p->x.pSelect==0 );
  }
#endif
................................................................................
    if( p->pRight ){
      sqlite3ExprDeleteNN(db, p->pRight);
    }else if( ExprHasProperty(p, EP_xIsSelect) ){
      sqlite3SelectDelete(db, p->x.pSelect);
    }else{
      sqlite3ExprListDelete(db, p->x.pList);
    }
    if( ExprHasProperty(p, EP_WinFunc) ){
      assert( p->op==TK_FUNCTION );
      sqlite3WindowDelete(db, p->y.pWin);
    }
  }
  if( ExprHasProperty(p, EP_MemToken) ) sqlite3DbFree(db, p->u.zToken);
  if( !ExprHasProperty(p, EP_Static) ){
    sqlite3DbFreeNN(db, p);
  }
}
................................................................................
static int dupedExprStructSize(Expr *p, int flags){
  int nSize;
  assert( flags==EXPRDUP_REDUCE || flags==0 ); /* Only one flag value allowed */
  assert( EXPR_FULLSIZE<=0xfff );
  assert( (0xfff & (EP_Reduced|EP_TokenOnly))==0 );
  if( 0==flags || p->op==TK_SELECT_COLUMN 
#ifndef SQLITE_OMIT_WINDOWFUNC
   || ExprHasProperty(p, EP_WinFunc)
#endif
  ){
    nSize = EXPR_FULLSIZE;
  }else{
    assert( !ExprHasProperty(p, EP_TokenOnly|EP_Reduced) );
    assert( !ExprHasProperty(p, EP_FromJoin) ); 
    assert( !ExprHasProperty(p, EP_MemToken) );
................................................................................
** This function returns the space in bytes required to store the copy 
** of the Expr structure and a copy of the Expr.u.zToken string (if that
** string is defined.)
*/
static int dupedExprNodeSize(Expr *p, int flags){
  int nByte = dupedExprStructSize(p, flags) & 0xfff;
  if( !ExprHasProperty(p, EP_IntValue) && p->u.zToken ){
    nByte += sqlite3Strlen30NN(p->u.zToken)+1;
  }
  return ROUND8(nByte);
}

/*
** Return the number of bytes required to create a duplicate of the 
** expression passed as the first argument. The second argument is a
................................................................................
        pNew->x.pSelect = sqlite3SelectDup(db, p->x.pSelect, dupFlags);
      }else{
        pNew->x.pList = sqlite3ExprListDup(db, p->x.pList, dupFlags);
      }
    }

    /* Fill in pNew->pLeft and pNew->pRight. */
    if( ExprHasProperty(pNew, EP_Reduced|EP_TokenOnly|EP_WinFunc) ){
      zAlloc += dupedExprNodeSize(p, dupFlags);
      if( !ExprHasProperty(pNew, EP_TokenOnly|EP_Leaf) ){
        pNew->pLeft = p->pLeft ?
                      exprDup(db, p->pLeft, EXPRDUP_REDUCE, &zAlloc) : 0;
        pNew->pRight = p->pRight ?
                       exprDup(db, p->pRight, EXPRDUP_REDUCE, &zAlloc) : 0;
      }
#ifndef SQLITE_OMIT_WINDOWFUNC
      if( ExprHasProperty(p, EP_WinFunc) ){
        pNew->y.pWin = sqlite3WindowDup(db, pNew, p->y.pWin);
        assert( ExprHasProperty(pNew, EP_WinFunc) );
      }
#endif /* SQLITE_OMIT_WINDOWFUNC */
      if( pzBuffer ){
        *pzBuffer = zAlloc;
      }
    }else{







      if( !ExprHasProperty(p, EP_TokenOnly|EP_Leaf) ){
        if( pNew->op==TK_SELECT_COLUMN ){
          pNew->pLeft = p->pLeft;
          assert( p->iColumn==0 || p->pRight==0 );
          assert( p->pRight==0  || p->pRight==p->pLeft );
        }else{
          pNew->pLeft = sqlite3ExprDup(db, p->pLeft, 0);
................................................................................
    case TK_INTEGER:
    case TK_STRING:
    case TK_FLOAT:
    case TK_BLOB:
      return 0;
    case TK_COLUMN:
      return ExprHasProperty(p, EP_CanBeNull) ||
             p->y.pTab==0 ||  /* Reference to column of index on expression */
             (p->iColumn>=0 && p->y.pTab->aCol[p->iColumn].notNull==0);
    default:
      return 1;
  }
}

/*
** Return TRUE if the given expression is a constant which would be
................................................................................
*/
SQLITE_PRIVATE int sqlite3IsRowid(const char *z){
  if( sqlite3StrICmp(z, "_ROWID_")==0 ) return 1;
  if( sqlite3StrICmp(z, "ROWID")==0 ) return 1;
  if( sqlite3StrICmp(z, "OID")==0 ) return 1;
  return 0;
}
#ifdef SQLITE_ENABLE_NORMALIZE
SQLITE_PRIVATE int sqlite3IsRowidN(const char *z, int n){
  if( sqlite3StrNICmp(z, "_ROWID_", n)==0 ) return 1;
  if( sqlite3StrNICmp(z, "ROWID", n)==0 ) return 1;
  if( sqlite3StrNICmp(z, "OID", n)==0 ) return 1;
  return 0;
}
#endif

/*
** pX is the RHS of an IN operator.  If pX is a SELECT statement 
** that can be simplified to a direct table access, then return
** a pointer to the SELECT statement.  If pX is not a SELECT statement,
** or if the SELECT statement needs to be manifested into a transient
** table, then return NULL.
................................................................................
        /* This COLUMN expression is really a constant due to WHERE clause
        ** constraints, and that constant is coded by the pExpr->pLeft
        ** expresssion.  However, make sure the constant has the correct
        ** datatype by applying the Affinity of the table column to the
        ** constant.
        */
        int iReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft,target);
        int aff = sqlite3TableColumnAffinity(pExpr->y.pTab, pExpr->iColumn);
        if( aff!=SQLITE_AFF_BLOB ){
          static const char zAff[] = "B\000C\000D\000E";
          assert( SQLITE_AFF_BLOB=='A' );
          assert( SQLITE_AFF_TEXT=='B' );
          if( iReg!=target ){
            sqlite3VdbeAddOp2(v, OP_SCopy, iReg, target);
            iReg = target;
................................................................................
          return pExpr->iColumn - pParse->iSelfTab;
        }else{
          /* Coding an expression that is part of an index where column names
          ** in the index refer to the table to which the index belongs */
          iTab = pParse->iSelfTab - 1;
        }
      }
      return sqlite3ExprCodeGetColumn(pParse, pExpr->y.pTab,
                               pExpr->iColumn, iTab, target,
                               pExpr->op2);
    }
    case TK_INTEGER: {
      codeInteger(pParse, pExpr, 0, target);
      return target;
    }
................................................................................
      u32 constMask = 0;     /* Mask of function arguments that are constant */
      int i;                 /* Loop counter */
      sqlite3 *db = pParse->db;  /* The database connection */
      u8 enc = ENC(db);      /* The text encoding used by this database */
      CollSeq *pColl = 0;    /* A collating sequence */

#ifndef SQLITE_OMIT_WINDOWFUNC
      if( ExprHasProperty(pExpr, EP_WinFunc) ){
        return pExpr->y.pWin->regResult;
      }
#endif

      if( ConstFactorOk(pParse) && sqlite3ExprIsConstantNotJoin(pExpr) ){
        /* SQL functions can be expensive. So try to move constant functions
        ** out of the inner loop, even if that means an extra OP_Copy. */
        return sqlite3ExprCodeAtInit(pParse, pExpr, -1);
................................................................................
      **
      ** Then p1 is interpreted as follows:
      **
      **   p1==0   ->    old.rowid     p1==3   ->    new.rowid
      **   p1==1   ->    old.a         p1==4   ->    new.a
      **   p1==2   ->    old.b         p1==5   ->    new.b       
      */
      Table *pTab = pExpr->y.pTab;
      int p1 = pExpr->iTable * (pTab->nCol+1) + 1 + pExpr->iColumn;

      assert( pExpr->iTable==0 || pExpr->iTable==1 );
      assert( pExpr->iColumn>=-1 && pExpr->iColumn<pTab->nCol );
      assert( pTab->iPKey<0 || pExpr->iColumn!=pTab->iPKey );
      assert( p1>=0 && p1<(pTab->nCol*2+2) );

      sqlite3VdbeAddOp2(v, OP_Param, p1, target);
      VdbeComment((v, "r[%d]=%s.%s", target,
        (pExpr->iTable ? "new" : "old"),
        (pExpr->iColumn<0 ? "rowid" : pExpr->y.pTab->aCol[pExpr->iColumn].zName)
      ));

#ifndef SQLITE_OMIT_FLOATING_POINT
      /* If the column has REAL affinity, it may currently be stored as an
      ** integer. Use OP_RealAffinity to make sure it is really real.
      **
      ** EVIDENCE-OF: R-60985-57662 SQLite will convert the value back to
................................................................................
      return 1;
    }
    return 2;
  }
  if( pA->op!=TK_COLUMN && pA->op!=TK_AGG_COLUMN && pA->u.zToken ){
    if( pA->op==TK_FUNCTION ){
      if( sqlite3StrICmp(pA->u.zToken,pB->u.zToken)!=0 ) return 2;
#ifndef SQLITE_OMIT_WINDOWFUNC
      /* Justification for the assert():
      ** window functions have p->op==TK_FUNCTION but aggregate functions
      ** have p->op==TK_AGG_FUNCTION.  So any comparison between an aggregate
      ** function and a window function should have failed before reaching
      ** this point.  And, it is not possible to have a window function and
      ** a scalar function with the same name and number of arguments.  So
      ** if we reach this point, either A and B both window functions or
      ** neither are a window functions. */
      assert( ExprHasProperty(pA,EP_WinFunc)==ExprHasProperty(pB,EP_WinFunc) );
      if( ExprHasProperty(pA,EP_WinFunc) ){
        if( sqlite3WindowCompare(pParse,pA->y.pWin,pB->y.pWin)!=0 ) return 2;
      }
#endif
    }else if( pA->op==TK_COLLATE ){
      if( sqlite3_stricmp(pA->u.zToken,pB->u.zToken)!=0 ) return 2;
    }else if( strcmp(pA->u.zToken,pB->u.zToken)!=0 ){
      return 2;
    }
  }
  if( (pA->flags & EP_Distinct)!=(pB->flags & EP_Distinct) ) return 2;
................................................................................
    if( sqlite3ExprListCompare(pA->x.pList, pB->x.pList, iTab) ) return 2;
    assert( (combinedFlags & EP_Reduced)==0 );
    if( pA->op!=TK_STRING && pA->op!=TK_TRUEFALSE ){
      if( pA->iColumn!=pB->iColumn ) return 2;
      if( pA->iTable!=pB->iTable 
       && (pA->iTable!=iTab || NEVER(pB->iTable>=0)) ) return 2;
    }















  }
  return 0;
}

/*
** Compare two ExprList objects.  Return 0 if they are identical and 
** non-zero if they differ in any way.
................................................................................
  }
  return 0;
}

/*
** This is the Expr node callback for sqlite3ExprImpliesNotNullRow().
** If the expression node requires that the table at pWalker->iCur
** have one or more non-NULL column, then set pWalker->eCode to 1 and abort.
**
** This routine controls an optimization.  False positives (setting
** pWalker->eCode to 1 when it should not be) are deadly, but false-negatives
** (never setting pWalker->eCode) is a harmless missed optimization.
*/
static int impliesNotNullRow(Walker *pWalker, Expr *pExpr){






  testcase( pExpr->op==TK_AGG_COLUMN );
  testcase( pExpr->op==TK_AGG_FUNCTION );

  if( ExprHasProperty(pExpr, EP_FromJoin) ) return WRC_Prune;
  switch( pExpr->op ){
    case TK_ISNOT:
    case TK_NOT:
    case TK_ISNULL:
    case TK_IS:
    case TK_OR:
................................................................................
    case TK_GE:
      testcase( pExpr->op==TK_EQ );
      testcase( pExpr->op==TK_NE );
      testcase( pExpr->op==TK_LT );
      testcase( pExpr->op==TK_LE );
      testcase( pExpr->op==TK_GT );
      testcase( pExpr->op==TK_GE );
      if( (pExpr->pLeft->op==TK_COLUMN && IsVirtual(pExpr->pLeft->y.pTab))
       || (pExpr->pRight->op==TK_COLUMN && IsVirtual(pExpr->pRight->y.pTab))
      ){
       return WRC_Prune;
      }
    default:
      return WRC_Continue;
  }
}
................................................................................
                break;
              }
            }
            if( (k>=pAggInfo->nColumn)
             && (k = addAggInfoColumn(pParse->db, pAggInfo))>=0 
            ){
              pCol = &pAggInfo->aCol[k];
              pCol->pTab = pExpr->y.pTab;
              pCol->iTable = pExpr->iTable;
              pCol->iColumn = pExpr->iColumn;
              pCol->iMem = ++pParse->nMem;
              pCol->iSorterColumn = -1;
              pCol->pExpr = pExpr;
              if( pAggInfo->pGroupBy ){
                int j, n;
................................................................................
  ** schema). Open a statement transaction if the table is a virtual
  ** table.
  */
  v = sqlite3GetVdbe(pParse);
  if( v==0 ){
    goto exit_rename_table;
  }















  /* figure out how many UTF-8 characters are in zName */
  zTabName = pTab->zName;
  nTabName = sqlite3Utf8CharLen(zTabName, -1);

  /* Rewrite all CREATE TABLE, INDEX, TRIGGER or VIEW statements in
  ** the schema to use the new table name.  */
................................................................................
              "CASE WHEN tbl_name=%Q COLLATE nocase AND "
              "          sqlite_rename_test(%Q, sql, type, name, 1) "
              "THEN %Q ELSE tbl_name END "
            "WHERE type IN ('view', 'trigger')"
        , zDb, zTabName, zName, zTabName, zDb, zName);
  }

  /* If this is a virtual table, invoke the xRename() function if
  ** one is defined. The xRename() callback will modify the names
  ** of any resources used by the v-table implementation (including other
  ** SQLite tables) that are identified by the name of the virtual table.
  */
#ifndef SQLITE_OMIT_VIRTUALTABLE
  if( pVTab ){
    int i = ++pParse->nMem;
    sqlite3VdbeLoadString(v, i, zName);
    sqlite3VdbeAddOp4(v, OP_VRename, i, 0, 0,(const char*)pVTab, P4_VTAB);
    sqlite3MayAbort(pParse);
  }
#endif

  renameReloadSchema(pParse, iDb);
  renameTestSchema(pParse, zDb, iDb==1);

exit_rename_table:
  sqlite3SrcListDelete(db, pSrc);
  sqlite3DbFree(db, zName);
  db->mDbFlags = savedDbFlags;
................................................................................
  }
}
#else
# define renameTokenCheckAll(x,y)
#endif

/*
** Remember that the parser tree element pPtr was created using
** the token pToken.
**
** In other words, construct a new RenameToken object and add it
** to the list of RenameToken objects currently being built up
** in pParse->pRename.
**
** The pPtr argument is returned so that this routine can be used
** with tail recursion in tokenExpr() routine, for a small performance
** improvement.
*/
SQLITE_PRIVATE void *sqlite3RenameTokenMap(Parse *pParse, void *pPtr, Token *pToken){
  RenameToken *pNew;
  assert( pPtr || pParse->db->mallocFailed );
  renameTokenCheckAll(pParse, pPtr);
  pNew = sqlite3DbMallocZero(pParse->db, sizeof(RenameToken));
  if( pNew ){
................................................................................
  if( pExpr->op==TK_TRIGGER 
   && pExpr->iColumn==p->iCol 
   && pWalker->pParse->pTriggerTab==p->pTab
  ){
    renameTokenFind(pWalker->pParse, p, (void*)pExpr);
  }else if( pExpr->op==TK_COLUMN 
   && pExpr->iColumn==p->iCol 
   && p->pTab==pExpr->y.pTab
  ){
    renameTokenFind(pWalker->pParse, p, (void*)pExpr);
  }
  return WRC_Continue;
}

/*
................................................................................
  memset(&sNC, 0, sizeof(sNC));
  sNC.pParse = pParse;
  assert( pNew->pTabSchema );
  pParse->pTriggerTab = sqlite3FindTable(db, pNew->table, 
      db->aDb[sqlite3SchemaToIndex(db, pNew->pTabSchema)].zDbSName
  );
  pParse->eTriggerOp = pNew->op;
  /* ALWAYS() because if the table of the trigger does not exist, the
  ** error would have been hit before this point */
  if( ALWAYS(pParse->pTriggerTab) ){
    rc = sqlite3ViewGetColumnNames(pParse, pParse->pTriggerTab);
  }

  /* Resolve symbols in WHEN clause */
  if( rc==SQLITE_OK && pNew->pWhen ){
    rc = sqlite3ResolveExprNames(&sNC, pNew->pWhen);
  }

  for(pStep=pNew->step_list; rc==SQLITE_OK && pStep; pStep=pStep->pNext){
    if( pStep->pSelect ){
      sqlite3SelectPrep(pParse, pStep->pSelect, &sNC);
      if( pParse->nErr ) rc = pParse->rc;
................................................................................
**   8. bTemp:    True if zSql comes from temp schema
**
** Do a column rename operation on the CREATE statement given in zSql.
** The iCol-th column (left-most is 0) of table zTable is renamed from zCol
** into zNew.  The name should be quoted if bQuote is true.
**
** This function is used internally by the ALTER TABLE RENAME COLUMN command.
** It is only accessible to SQL created using sqlite3NestedParse().  It is
** not reachable from ordinary SQL passed into sqlite3_prepare().







*/
static void renameColumnFunc(
  sqlite3_context *context,
  int NotUsed,
  sqlite3_value **argv
){
  sqlite3 *db = sqlite3_context_db_handle(context);
................................................................................
}

/*
** Walker expression callback used by "RENAME TABLE". 
*/
static int renameTableExprCb(Walker *pWalker, Expr *pExpr){
  RenameCtx *p = pWalker->u.pRename;
  if( pExpr->op==TK_COLUMN && p->pTab==pExpr->y.pTab ){
    renameTokenFind(pWalker->pParse, p, (void*)&pExpr->y.pTab);
  }
  return WRC_Continue;
}

/*
** Walker select callback used by "RENAME TABLE". 
*/
................................................................................
    sWalker.xExprCallback = renameTableExprCb;
    sWalker.xSelectCallback = renameTableSelectCb;
    sWalker.u.pRename = &sCtx;

    rc = renameParseSql(&sParse, zDb, 1, db, zInput, bTemp);

    if( rc==SQLITE_OK ){
      int isLegacy = (db->flags & SQLITE_LegacyAlter);
      if( sParse.pNewTable ){
        Table *pTab = sParse.pNewTable;

        if( pTab->pSelect ){
          if( isLegacy==0 ){
            NameContext sNC;
            memset(&sNC, 0, sizeof(sNC));
            sNC.pParse = &sParse;

            sqlite3SelectPrep(&sParse, pTab->pSelect, &sNC);
            if( sParse.nErr ) rc = sParse.rc;
            sqlite3WalkSelect(&sWalker, pTab->pSelect);
          }
        }else{
          /* Modify any FK definitions to point to the new table. */
#ifndef SQLITE_OMIT_FOREIGN_KEY
          if( isLegacy==0 || (db->flags & SQLITE_ForeignKeys) ){
            FKey *pFKey;
            for(pFKey=pTab->pFKey; pFKey; pFKey=pFKey->pNextFrom){
              if( sqlite3_stricmp(pFKey->zTo, zOld)==0 ){
                renameTokenFind(&sParse, &sCtx, (void*)pFKey->zTo);
              }
            }
          }
................................................................................
#endif

          /* If this is the table being altered, fix any table refs in CHECK
          ** expressions. Also update the name that appears right after the
          ** "CREATE [VIRTUAL] TABLE" bit. */
          if( sqlite3_stricmp(zOld, pTab->zName)==0 ){
            sCtx.pTab = pTab;
            if( isLegacy==0 ){
              sqlite3WalkExprList(&sWalker, pTab->pCheck);
            }
            renameTokenFind(&sParse, &sCtx, pTab->zName);
          }
        }
      }

      else if( sParse.pNewIndex ){
        renameTokenFind(&sParse, &sCtx, sParse.pNewIndex->zName);
        if( isLegacy==0 ){
          sqlite3WalkExpr(&sWalker, sParse.pNewIndex->pPartIdxWhere);
        }
      }

#ifndef SQLITE_OMIT_TRIGGER
      else{
        Trigger *pTrigger = sParse.pNewTrigger;
        TriggerStep *pStep;
        if( 0==sqlite3_stricmp(sParse.pNewTrigger->table, zOld) 
            && sCtx.pTab->pSchema==pTrigger->pTabSchema
          ){
          renameTokenFind(&sParse, &sCtx, sParse.pNewTrigger->table);
        }

        if( isLegacy==0 ){
          rc = renameResolveTrigger(&sParse, bTemp ? 0 : zDb);
          if( rc==SQLITE_OK ){
            renameWalkTrigger(&sWalker, pTrigger);
            for(pStep=pTrigger->step_list; pStep; pStep=pStep->pNext){
              if( pStep->zTarget && 0==sqlite3_stricmp(pStep->zTarget, zOld) ){
                renameTokenFind(&sParse, &sCtx, pStep->zTarget);
              }
            }
          }
        }
      }
#endif
    }

................................................................................
  int NotUsed,
  sqlite3_value **argv
){
  sqlite3 *db = sqlite3_context_db_handle(context);
  char const *zDb = (const char*)sqlite3_value_text(argv[0]);
  char const *zInput = (const char*)sqlite3_value_text(argv[1]);
  int bTemp = sqlite3_value_int(argv[4]);
  int isLegacy = (db->flags & SQLITE_LegacyAlter);

#ifndef SQLITE_OMIT_AUTHORIZATION
  sqlite3_xauth xAuth = db->xAuth;
  db->xAuth = 0;
#endif

  UNUSED_PARAMETER(NotUsed);
  if( zDb && zInput ){
    int rc;
    Parse sParse;
    rc = renameParseSql(&sParse, zDb, 1, db, zInput, bTemp);
    if( rc==SQLITE_OK ){
      if( isLegacy==0 && sParse.pNewTable && sParse.pNewTable->pSelect ){
        NameContext sNC;
        memset(&sNC, 0, sizeof(sNC));
        sNC.pParse = &sParse;
        sqlite3SelectPrep(&sParse, sParse.pNewTable->pSelect, &sNC);
        if( sParse.nErr ) rc = sParse.rc;
      }

      else if( sParse.pNewTrigger ){
        if( isLegacy==0 ){
          rc = renameResolveTrigger(&sParse, bTemp ? 0 : zDb);
        }
        if( rc==SQLITE_OK ){
          int i1 = sqlite3SchemaToIndex(db, sParse.pNewTrigger->pTabSchema);
          int i2 = sqlite3FindDbName(db, zDb);
          if( i1==i2 ) sqlite3_result_int(context, 1);
        }
      }
    }
................................................................................
}

/*
** Register built-in functions used to help implement ALTER TABLE
*/
SQLITE_PRIVATE void sqlite3AlterFunctions(void){
  static FuncDef aAlterTableFuncs[] = {
    INTERNAL_FUNCTION(sqlite_rename_column, 9, renameColumnFunc),
    INTERNAL_FUNCTION(sqlite_rename_table,  7, renameTableFunc),
    INTERNAL_FUNCTION(sqlite_rename_test,   5, renameTableTest),
  };
  sqlite3InsertBuiltinFuncs(aAlterTableFuncs, ArraySize(aAlterTableFuncs));
}
#endif  /* SQLITE_ALTER_TABLE */

/************** End of alter.c ***********************************************/
/************** Begin file analyze.c *****************************************/
................................................................................
    ** reopen it as a MemDB */
    pVfs = sqlite3_vfs_find("memdb");
    if( pVfs==0 ) return;
    pNew = &db->aDb[db->init.iDb];
    if( pNew->pBt ) sqlite3BtreeClose(pNew->pBt);
    pNew->pBt = 0;
    pNew->pSchema = 0;
    rc = sqlite3BtreeOpen(pVfs, "x\0", db, &pNew->pBt, 0, SQLITE_OPEN_MAIN_DB);
  }else{
    /* This is a real ATTACH
    **
    ** Check for the following errors:
    **
    **     * Too many attached databases,
    **     * Transaction currently open
................................................................................
  Table *pTab = 0;      /* The table being read */
  const char *zCol;     /* Name of the column of the table */
  int iSrc;             /* Index in pTabList->a[] of table being read */
  int iDb;              /* The index of the database the expression refers to */
  int iCol;             /* Index of column in table */

  assert( pExpr->op==TK_COLUMN || pExpr->op==TK_TRIGGER );
  assert( !IN_RENAME_OBJECT || db->xAuth==0 );
  if( db->xAuth==0 ) return;
  iDb = sqlite3SchemaToIndex(pParse->db, pSchema);
  if( iDb<0 ){
    /* An attempt to read a column out of a subquery or other
    ** temporary table. */
    return;
  }
................................................................................
){
  sqlite3 *db = pParse->db;
  int rc;

  /* Don't do any authorization checks if the database is initialising
  ** or if the parser is being invoked from within sqlite3_declare_vtab.
  */
  assert( !IN_RENAME_OBJECT || db->xAuth==0 );
  if( db->init.busy || IN_SPECIAL_PARSE ){
    return SQLITE_OK;
  }

  if( db->xAuth==0 ){
    return SQLITE_OK;
  }
................................................................................
    return 0;
  }

  p = sqlite3FindTable(db, zName, zDbase);
  if( p==0 ){
    const char *zMsg = flags & LOCATE_VIEW ? "no such view" : "no such table";
#ifndef SQLITE_OMIT_VIRTUALTABLE

    /* If zName is the not the name of a table in the schema created using
    ** CREATE, then check to see if it is the name of an virtual table that
    ** can be an eponymous virtual table. */
    Module *pMod = (Module*)sqlite3HashFind(&db->aModule, zName);
    if( pMod==0 && sqlite3_strnicmp(zName, "pragma_", 7)==0 ){
      pMod = sqlite3PragmaVtabRegister(db, zName);
    }
    if( pMod && sqlite3VtabEponymousTableInit(pParse, pMod) ){
      return pMod->pEpoTab;

    }
#endif
    if( (flags & LOCATE_NOERR)==0 ){
      if( zDbase ){
        sqlite3ErrorMsg(pParse, "%s: %s.%s", zMsg, zDbase, zName);
      }else{
        sqlite3ErrorMsg(pParse, "%s: %s", zMsg, zName);
................................................................................
/*
** Erase all schema information from all attached databases (including
** "main" and "temp") for a single database connection.
*/
SQLITE_PRIVATE void sqlite3ResetAllSchemasOfConnection(sqlite3 *db){
  int i;
  sqlite3BtreeEnterAll(db);

  for(i=0; i<db->nDb; i++){
    Db *pDb = &db->aDb[i];
    if( pDb->pSchema ){
      if( db->nSchemaLock==0 ){
        sqlite3SchemaClear(pDb->pSchema);
      }else{
        DbSetProperty(db, i, DB_ResetWanted);
      }
    }
  }
  db->mDbFlags &= ~(DBFLAG_SchemaChange|DBFLAG_SchemaKnownOk);
  sqlite3VtabUnlockList(db);
  sqlite3BtreeLeaveAll(db);
  if( db->nSchemaLock==0 ){
    sqlite3CollapseDatabaseArray(db);
  }
}

/*
** This routine is called when a commit occurs.
*/
SQLITE_PRIVATE void sqlite3CommitInternalChanges(sqlite3 *db){
  db->mDbFlags &= ~DBFLAG_SchemaChange;
................................................................................
  }

  /* Delete any foreign keys attached to this table. */
  sqlite3FkDelete(db, pTable);

  /* Delete the Table structure itself.
  */
#ifdef SQLITE_ENABLE_NORMALIZE
  if( pTable->pColHash ){
    sqlite3HashClear(pTable->pColHash);
    sqlite3_free(pTable->pColHash);
  }
#endif
  sqlite3DeleteColumnNames(db, pTable);
  sqlite3DbFree(db, pTable->zName);
  sqlite3DbFree(db, pTable->zColAff);
  sqlite3SelectDelete(db, pTable->pSelect);
  sqlite3ExprListDelete(db, pTable->pCheck);
#ifndef SQLITE_OMIT_VIRTUALTABLE
  sqlite3VtabClear(db, pTable);
................................................................................
             || (db->mDbFlags & DBFLAG_Vacuum)!=0);
    iDb = db->init.iDb;
    *pUnqual = pName1;
  }
  return iDb;
}

/*
** True if PRAGMA writable_schema is ON
*/
SQLITE_PRIVATE int sqlite3WritableSchema(sqlite3 *db){
  testcase( (db->flags&(SQLITE_WriteSchema|SQLITE_Defensive))==0 );
  testcase( (db->flags&(SQLITE_WriteSchema|SQLITE_Defensive))==
               SQLITE_WriteSchema );
  testcase( (db->flags&(SQLITE_WriteSchema|SQLITE_Defensive))==
               SQLITE_Defensive );
  testcase( (db->flags&(SQLITE_WriteSchema|SQLITE_Defensive))==
               (SQLITE_WriteSchema|SQLITE_Defensive) );
  return (db->flags&(SQLITE_WriteSchema|SQLITE_Defensive))==SQLITE_WriteSchema;
}

/*
** This routine is used to check if the UTF-8 string zName is a legal
** unqualified name for a new schema object (table, index, view or
** trigger). All names are legal except those that begin with the string
** "sqlite_" (in upper, lower or mixed case). This portion of the namespace
** is reserved for internal use.
*/
SQLITE_PRIVATE int sqlite3CheckObjectName(Parse *pParse, const char *zName){
  if( !pParse->db->init.busy && pParse->nested==0 
          && sqlite3WritableSchema(pParse->db)==0
          && 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){
    sqlite3ErrorMsg(pParse, "object name reserved for internal use: %s", zName);
    return SQLITE_ERROR;
  }
  return SQLITE_OK;
}

................................................................................
  if( !db->init.imposterTable ){
    for(i=0; i<pTab->nCol; i++){
      if( (pTab->aCol[i].colFlags & COLFLAG_PRIMKEY)!=0 ){
        pTab->aCol[i].notNull = OE_Abort;
      }
    }
  }





  /* Convert the P3 operand of the OP_CreateBtree opcode from BTREE_INTKEY
  ** into BTREE_BLOBKEY.
  */
  if( pParse->addrCrTab ){
    assert( v );
    sqlite3VdbeChangeP3(v, pParse->addrCrTab, BTREE_BLOBKEY);
................................................................................
    assert( pTab->nCol==j );
  }else{
    pPk->nColumn = pTab->nCol;
  }
  recomputeColumnsNotIndexed(pPk);
}

#ifndef SQLITE_OMIT_VIRTUALTABLE
/*
** Return true if zName is a shadow table name in the current database
** connection.
**
** zName is temporarily modified while this routine is running, but is
** restored to its original value prior to this routine returning.
*/
static int isShadowTableName(sqlite3 *db, char *zName){
  char *zTail;                  /* Pointer to the last "_" in zName */
  Table *pTab;                  /* Table that zName is a shadow of */
  Module *pMod;                 /* Module for the virtual table */

  zTail = strrchr(zName, '_');
  if( zTail==0 ) return 0;
  *zTail = 0;
  pTab = sqlite3FindTable(db, zName, 0);
  *zTail = '_';
  if( pTab==0 ) return 0;
  if( !IsVirtual(pTab) ) return 0;
  pMod = (Module*)sqlite3HashFind(&db->aModule, pTab->azModuleArg[0]);
  if( pMod==0 ) return 0;
  if( pMod->pModule->iVersion<3 ) return 0;
  if( pMod->pModule->xShadowName==0 ) return 0;
  return pMod->pModule->xShadowName(zTail+1);
}
#else
# define isShadowTableName(x,y) 0
#endif /* ifndef SQLITE_OMIT_VIRTUALTABLE */

/*
** This routine is called to report the final ")" that terminates
** a CREATE TABLE statement.
**
** The table structure that other action routines have been building
** is added to the internal hash tables, assuming no errors have
** occurred.
................................................................................
  if( pEnd==0 && pSelect==0 ){
    return;
  }
  assert( !db->mallocFailed );
  p = pParse->pNewTable;
  if( p==0 ) return;

  if( pSelect==0 && isShadowTableName(db, p->zName) ){
    p->tabFlags |= TF_Shadow;
  }

  /* If the db->init.busy is 1 it means we are reading the SQL off the
  ** "sqlite_master" or "sqlite_temp_master" table on the disk.
  ** So do not write to the disk again.  Extract the root page number
  ** for the table from the db->init.newTnum field.  (The page number
  ** should have been put there by the sqliteOpenCb routine.)
  **
  ** If the root page number is 1, that means this is the sqlite_master
................................................................................
** Also write code to modify the sqlite_master table and internal schema
** if a root-page of another table is moved by the btree-layer whilst
** erasing iTable (this can happen with an auto-vacuum database).
*/ 
static void destroyRootPage(Parse *pParse, int iTable, int iDb){
  Vdbe *v = sqlite3GetVdbe(pParse);
  int r1 = sqlite3GetTempReg(pParse);
  if( iTable<2 ) sqlite3ErrorMsg(pParse, "corrupt schema");
  sqlite3VdbeAddOp3(v, OP_Destroy, iTable, r1, iDb);
  sqlite3MayAbort(pParse);
#ifndef SQLITE_OMIT_AUTOVACUUM
  /* OP_Destroy stores an in integer r1. If this integer
  ** is non-zero, then it is the root page number of a table moved to
  ** location iTable. The following code modifies the sqlite_master table to
  ** reflect this.
................................................................................
  for(p=sqlite3BuiltinFunctions.a[h]; p; p=p->u.pHash){
    if( sqlite3StrICmp(p->zName, zFunc)==0 ){
      return p;
    }
  }
  return 0;
}
#ifdef SQLITE_ENABLE_NORMALIZE
SQLITE_PRIVATE FuncDef *sqlite3FunctionSearchN(
  int h,               /* Hash of the name */
  const char *zFunc,   /* Name of function */
  int nFunc            /* Length of the name */
){
  FuncDef *p;
  for(p=sqlite3BuiltinFunctions.a[h]; p; p=p->u.pHash){
    if( sqlite3StrNICmp(p->zName, zFunc, nFunc)==0 ){
      return p;
    }
  }
  return 0;
}
#endif /* SQLITE_ENABLE_NORMALIZE */

/*
** Insert a new FuncDef into a FuncDefHash hash table.
*/
SQLITE_PRIVATE void sqlite3InsertBuiltinFuncs(
  FuncDef *aDef,      /* List of global functions to be inserted */
  int nDef            /* Length of the apDef[] list */
){
  int i;
  for(i=0; i<nDef; i++){
    FuncDef *pOther;
    const char *zName = aDef[i].zName;
    int nName = sqlite3Strlen30(zName);
    int h = SQLITE_FUNC_HASH(zName[0], nName);
    assert( zName[0]>='a' && zName[0]<='z' );
    pOther = functionSearch(h, zName);
    if( pOther ){
      assert( pOther!=&aDef[i] && pOther->pNext!=&aDef[i] );
      aDef[i].pNext = pOther->pNext;
      pOther->pNext = &aDef[i];
    }else{
................................................................................
  ** install a new function.  Whatever FuncDef structure is returned it will
  ** have fields overwritten with new information appropriate for the
  ** new function.  But the FuncDefs for built-in functions are read-only.
  ** So we must not search for built-ins when creating a new function.
  */ 
  if( !createFlag && (pBest==0 || (db->mDbFlags & DBFLAG_PreferBuiltin)!=0) ){
    bestScore = 0;
    h = SQLITE_FUNC_HASH(sqlite3UpperToLower[(u8)zName[0]], nName);
    p = functionSearch(h, zName);
    while( p ){
      int score = matchQuality(p, nArg, enc);
      if( score>bestScore ){
        pBest = p;
        bestScore = score;
      }
................................................................................
  }
  if( sqlite3IndexedByLookup(pParse, pItem) ){
    pTab = 0;
  }
  return pTab;
}

/* Return true if table pTab is read-only.



**
** A table is read-only if any of the following are true:


**
**   1) It is a virtual table and no implementation of the xUpdate method
**      has been provided
**
**   2) It is a system table (i.e. sqlite_master), this call is not
**      part of a nested parse and writable_schema pragma has not 
**      been specified
**
**   3) The table is a shadow table, the database connection is in
**      defensive mode, and the current sqlite3_prepare()
**      is for a top-level SQL statement.

*/
static int tabIsReadOnly(Parse *pParse, Table *pTab){
  sqlite3 *db;
  if( IsVirtual(pTab) ){
    return sqlite3GetVTable(pParse->db, pTab)->pMod->pModule->xUpdate==0;
  }
  if( (pTab->tabFlags & (TF_Readonly|TF_Shadow))==0 ) return 0;
  db = pParse->db;
  if( (pTab->tabFlags & TF_Readonly)!=0 ){

    return sqlite3WritableSchema(db)==0 && pParse->nested==0;
  }
  assert( pTab->tabFlags & TF_Shadow );
  return (db->flags & SQLITE_Defensive)!=0 
#ifndef SQLITE_OMIT_VIRTUALTABLE
          && db->pVtabCtx==0
#endif
          && db->nVdbeExec==0;
}

/*
** Check to make sure the given table is writable.  If it is not
** writable, generate an error message and return 1.  If it is
** writable return 0;
*/
SQLITE_PRIVATE int sqlite3IsReadOnly(Parse *pParse, Table *pTab, int viewOk){
  if( tabIsReadOnly(pParse, pTab) ){

    sqlite3ErrorMsg(pParse, "table %s may not be modified", pTab->zName);
    return 1;
  }

#ifndef SQLITE_OMIT_VIEW
  if( !viewOk && pTab->pSelect ){
    sqlite3ErrorMsg(pParse,"cannot modify %s because it is a view",pTab->zName);
    return 1;
  }
#endif
  return 0;
................................................................................
  sqlite3 *db,      /* The database connection */
  Table *pTab,      /* The table whose column is desired */
  int iCursor,      /* The open cursor on the table */
  i16 iCol          /* The column that is wanted */
){
  Expr *pExpr = sqlite3Expr(db, TK_COLUMN, 0);
  if( pExpr ){
    pExpr->y.pTab = pTab;
    pExpr->iTable = iCursor;
    pExpr->iColumn = iCol;
  }
  return pExpr;
}

/*
................................................................................
      zColAff[i] = pTab->aCol[i].affinity;
    }
    do{
      zColAff[i--] = 0;
    }while( i>=0 && zColAff[i]==SQLITE_AFF_BLOB );
    pTab->zColAff = zColAff;
  }
  assert( zColAff!=0 );
  i = sqlite3Strlen30NN(zColAff);
  if( i ){
    if( iReg ){
      sqlite3VdbeAddOp4(v, OP_Affinity, iReg, i, 0, zColAff, i);
    }else{
      sqlite3VdbeChangeP4(v, -1, zColAff, i);
    }
  }
................................................................................
 #undef pTrigger
#endif
#ifdef tmask
 #undef tmask
#endif

/*
** Meanings of bits in of pWalker->eCode for 
** sqlite3ExprReferencesUpdatedColumn()
*/
#define CKCNSTRNT_COLUMN   0x01    /* CHECK constraint uses a changing column */
#define CKCNSTRNT_ROWID    0x02    /* CHECK constraint references the ROWID */

/* This is the Walker callback from sqlite3ExprReferencesUpdatedColumn().
*  Set bit 0x01 of pWalker->eCode if pWalker->eCode to 0 and if this
** expression node references any of the
** columns that are being modifed by an UPDATE statement.
*/
static int checkConstraintExprNode(Walker *pWalker, Expr *pExpr){
  if( pExpr->op==TK_COLUMN ){
    assert( pExpr->iColumn>=0 || pExpr->iColumn==-1 );
    if( pExpr->iColumn>=0 ){
      if( pWalker->u.aiCol[pExpr->iColumn]>=0 ){
................................................................................
}

/*
** pExpr is a CHECK constraint on a row that is being UPDATE-ed.  The
** only columns that are modified by the UPDATE are those for which
** aiChng[i]>=0, and also the ROWID is modified if chngRowid is true.
**
** Return true if CHECK constraint pExpr uses any of the
** changing columns (or the rowid if it is changing).  In other words,
** return true if this CHECK constraint must be validated for
** the new row in the UPDATE statement.
**
** 2018-09-15: pExpr might also be an expression for an index-on-expressions.
** The operation of this routine is the same - return true if an only if
** the expression uses one or more of columns identified by the second and
** third arguments.
*/
SQLITE_PRIVATE int sqlite3ExprReferencesUpdatedColumn(
  Expr *pExpr,    /* The expression to be checked */
  int *aiChng,    /* aiChng[x]>=0 if column x changed by the UPDATE */
  int chngRowid   /* True if UPDATE changes the rowid */
){

  Walker w;
  memset(&w, 0, sizeof(w));
  w.eCode = 0;
  w.xExprCallback = checkConstraintExprNode;
  w.u.aiCol = aiChng;
  sqlite3WalkExpr(&w, pExpr);
  if( !chngRowid ){
................................................................................
    testcase( (w.eCode & CKCNSTRNT_ROWID)!=0 );
    w.eCode &= ~CKCNSTRNT_ROWID;
  }
  testcase( w.eCode==0 );
  testcase( w.eCode==CKCNSTRNT_COLUMN );
  testcase( w.eCode==CKCNSTRNT_ROWID );
  testcase( w.eCode==(CKCNSTRNT_ROWID|CKCNSTRNT_COLUMN) );
  return w.eCode!=0;
}

/*
** Generate code to do constraint checks prior to an INSERT or an UPDATE
** on table pTab.
**
** The regNewData parameter is the first register in a range that contains
................................................................................
  if( pTab->pCheck && (db->flags & SQLITE_IgnoreChecks)==0 ){
    ExprList *pCheck = pTab->pCheck;
    pParse->iSelfTab = -(regNewData+1);
    onError = overrideError!=OE_Default ? overrideError : OE_Abort;
    for(i=0; i<pCheck->nExpr; i++){
      int allOk;
      Expr *pExpr = pCheck->a[i].pExpr;
      if( aiChng
       && !sqlite3ExprReferencesUpdatedColumn(pExpr, aiChng, pkChng)
      ){
        /* The check constraints do not reference any of the columns being
        ** updated so there is no point it verifying the check constraint */
        continue;
      }
      allOk = sqlite3VdbeMakeLabel(v);
      sqlite3VdbeVerifyAbortable(v, onError);
      sqlite3ExprIfTrue(pParse, pExpr, allOk, SQLITE_JUMPIFNULL);
      if( onError==OE_Ignore ){
        sqlite3VdbeGoto(v, ignoreDest);
      }else{
        char *zName = pCheck->a[i].zName;
................................................................................
  void (*str_append)(sqlite3_str*, const char *zIn, int N);
  void (*str_appendall)(sqlite3_str*, const char *zIn);
  void (*str_appendchar)(sqlite3_str*, int N, char C);
  void (*str_reset)(sqlite3_str*);
  int (*str_errcode)(sqlite3_str*);
  int (*str_length)(sqlite3_str*);
  char *(*str_value)(sqlite3_str*);
  /* Version 3.25.0 and later */
  int (*create_window_function)(sqlite3*,const char*,int,int,void*,
                            void (*xStep)(sqlite3_context*,int,sqlite3_value**),
                            void (*xFinal)(sqlite3_context*),
                            void (*xValue)(sqlite3_context*),
                            void (*xInv)(sqlite3_context*,int,sqlite3_value**),
                            void(*xDestroy)(void*));
  /* Version 3.26.0 and later */
  const char *(*normalized_sql)(sqlite3_stmt*);
};

/*
** This is the function signature used for all extension entry points.  It
** is also defined in the file "loadext.c".
*/
typedef int (*sqlite3_loadext_entry)(
................................................................................
#define sqlite3_str_appendchar         sqlite3_api->str_appendchar
#define sqlite3_str_reset              sqlite3_api->str_reset
#define sqlite3_str_errcode            sqlite3_api->str_errcode
#define sqlite3_str_length             sqlite3_api->str_length
#define sqlite3_str_value              sqlite3_api->str_value
/* Version 3.25.0 and later */
#define sqlite3_create_window_function sqlite3_api->create_window_function
/* Version 3.26.0 and later */
#define sqlite3_normalized_sql         sqlite3_api->normalized_sql
#endif /* !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION) */

#if !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION)
  /* This case when the file really is being compiled as a loadable 
  ** extension */
# define SQLITE_EXTENSION_INIT1     const sqlite3_api_routines *sqlite3_api=0;
# define SQLITE_EXTENSION_INIT2(v)  sqlite3_api=v;
................................................................................

#ifdef SQLITE_OMIT_VIRTUALTABLE
# define sqlite3_create_module 0
# define sqlite3_create_module_v2 0
# define sqlite3_declare_vtab 0
# define sqlite3_vtab_config 0
# define sqlite3_vtab_on_conflict 0
# define sqlite3_vtab_collation 0
#endif

#ifdef SQLITE_OMIT_SHARED_CACHE
# define sqlite3_enable_shared_cache 0
#endif

#if defined(SQLITE_OMIT_TRACE) || defined(SQLITE_OMIT_DEPRECATED)
................................................................................
  sqlite3_str_appendall,
  sqlite3_str_appendchar,
  sqlite3_str_reset,
  sqlite3_str_errcode,
  sqlite3_str_length,
  sqlite3_str_value,
  /* Version 3.25.0 and later */
  sqlite3_create_window_function,
  /* Version 3.26.0 and later */
#ifdef SQLITE_ENABLE_NORMALIZE
  sqlite3_normalized_sql
#else
  0
#endif
};

/*
** Attempt to load an SQLite extension library contained in the file
** zFile.  The entry point is zProc.  zProc may be 0 in which case a
** default entry point name (sqlite3_extension_init) is used.  Use
** of the default name is recommended.
................................................................................
#define PragTyp_TEMP_STORE_DIRECTORY          36
#define PragTyp_THREADS                       37
#define PragTyp_WAL_AUTOCHECKPOINT            38
#define PragTyp_WAL_CHECKPOINT                39
#define PragTyp_ACTIVATE_EXTENSIONS           40
#define PragTyp_HEXKEY                        41
#define PragTyp_KEY                           42

#define PragTyp_LOCK_STATUS                   43
#define PragTyp_PARSER_TRACE                  44
#define PragTyp_STATS                         45

/* Property flags associated with various pragma. */
#define PragFlg_NeedSchema 0x01 /* Force schema load before running */
#define PragFlg_NoColumns  0x02 /* OP_ResultRow called with zero columns */
#define PragFlg_NoColumns1 0x04 /* zero columns if RHS argument is present */
#define PragFlg_ReadOnly   0x08 /* Read-only HEADER_VALUE */
#define PragFlg_Result0    0x10 /* Acts as query when no argument */
................................................................................
#define PragFlg_SchemaReq  0x80 /* Schema required - "main" is default */

/* Names of columns for pragmas that return multi-column result
** or that return single-column results where the name of the
** result column is different from the name of the pragma
*/
static const char *const pragCName[] = {
  /*   0 */ "id",          /* Used by: foreign_key_list */
  /*   1 */ "seq",        
  /*   2 */ "table",      
  /*   3 */ "from",       
  /*   4 */ "to",         
  /*   5 */ "on_update",  
  /*   6 */ "on_delete",  
  /*   7 */ "match",      
  /*   8 */ "cid",         /* Used by: table_xinfo */
  /*   9 */ "name",       
  /*  10 */ "type",       
  /*  11 */ "notnull",    
  /*  12 */ "dflt_value", 
  /*  13 */ "pk",         
  /*  14 */ "hidden",     
                           /* table_info reuses 8 */
  /*  15 */ "seqno",       /* Used by: index_xinfo */
  /*  16 */ "cid",        
  /*  17 */ "name",       
  /*  18 */ "desc",       
  /*  19 */ "coll",       
  /*  20 */ "key",        
  /*  21 */ "tbl",         /* Used by: stats */
  /*  22 */ "idx",        
  /*  23 */ "wdth",       
  /*  24 */ "hght",       
  /*  25 */ "flgs",       
  /*  26 */ "seq",         /* Used by: index_list */
  /*  27 */ "name",       
  /*  28 */ "unique",     
  /*  29 */ "origin",     
  /*  30 */ "partial",    
  /*  31 */ "table",       /* Used by: foreign_key_check */
  /*  32 */ "rowid",      
  /*  33 */ "parent",     
  /*  34 */ "fkid",       
                           /* index_info reuses 15 */
  /*  35 */ "seq",         /* Used by: database_list */
  /*  36 */ "name",       
  /*  37 */ "file",       
  /*  38 */ "busy",        /* Used by: wal_checkpoint */

  /*  39 */ "log",        
  /*  40 */ "checkpointed",

  /*  41 */ "name",        /* Used by: function_list */
  /*  42 */ "builtin",    
                           /* collation_list reuses 26 */
  /*  43 */ "database",    /* Used by: lock_status */
  /*  44 */ "status",     


  /*  45 */ "cache_size",  /* Used by: default_cache_size */
                           /* module_list pragma_list reuses 9 */
  /*  46 */ "timeout",     /* Used by: busy_timeout */


};

/* Definitions of all built-in pragmas */
typedef struct PragmaName {
  const char *const zName; /* Name of pragma */
  u8 ePragTyp;             /* PragTyp_XXX value */
  u8 mPragFlg;             /* Zero or more PragFlg_XXX values */
  u8 iPragCName;           /* Start of column names in pragCName[] */
  u8 nPragCName;           /* Num of col names. 0 means use pragma name */
  u64 iArg;                /* Extra argument */
} PragmaName;
static const PragmaName aPragmaName[] = {
#if defined(SQLITE_HAS_CODEC) || defined(SQLITE_ENABLE_CEROD)
 {/* zName:     */ "activate_extensions",
  /* ePragTyp:  */ PragTyp_ACTIVATE_EXTENSIONS,
  /* ePragFlg:  */ 0,
  /* ColNames:  */ 0, 0,
................................................................................
  /* ColNames:  */ 0, 0,
  /* iArg:      */ SQLITE_AutoIndex },
#endif
#endif
 {/* zName:     */ "busy_timeout",
  /* ePragTyp:  */ PragTyp_BUSY_TIMEOUT,
  /* ePragFlg:  */ PragFlg_Result0,
  /* ColNames:  */ 46, 1,
  /* iArg:      */ 0 },
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
 {/* zName:     */ "cache_size",
  /* ePragTyp:  */ PragTyp_CACHE_SIZE,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq|PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
................................................................................
  /* ColNames:  */ 0, 0,
  /* iArg:      */ SQLITE_CkptFullFSync },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
 {/* zName:     */ "collation_list",
  /* ePragTyp:  */ PragTyp_COLLATION_LIST,
  /* ePragFlg:  */ PragFlg_Result0,
  /* ColNames:  */ 26, 2,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_COMPILEOPTION_DIAGS)
 {/* zName:     */ "compile_options",
  /* ePragTyp:  */ PragTyp_COMPILE_OPTIONS,
  /* ePragFlg:  */ PragFlg_Result0,
  /* ColNames:  */ 0, 0,
................................................................................
  /* ColNames:  */ 0, 0,
  /* iArg:      */ BTREE_DATA_VERSION },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
 {/* zName:     */ "database_list",
  /* ePragTyp:  */ PragTyp_DATABASE_LIST,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result0,
  /* ColNames:  */ 35, 3,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && !defined(SQLITE_OMIT_DEPRECATED)
 {/* zName:     */ "default_cache_size",
  /* ePragTyp:  */ PragTyp_DEFAULT_CACHE_SIZE,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq|PragFlg_NoColumns1,
  /* ColNames:  */ 45, 1,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
 {/* zName:     */ "defer_foreign_keys",
  /* ePragTyp:  */ PragTyp_FLAG,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_NoColumns1,
................................................................................
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
 {/* zName:     */ "foreign_key_check",
  /* ePragTyp:  */ PragTyp_FOREIGN_KEY_CHECK,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result0,
  /* ColNames:  */ 31, 4,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_FOREIGN_KEY)
 {/* zName:     */ "foreign_key_list",
  /* ePragTyp:  */ PragTyp_FOREIGN_KEY_LIST,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
  /* ColNames:  */ 0, 8,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
 {/* zName:     */ "foreign_keys",
  /* ePragTyp:  */ PragTyp_FLAG,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_NoColumns1,
................................................................................
  /* iArg:      */ SQLITE_FullFSync },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
#if defined(SQLITE_INTROSPECTION_PRAGMAS)
 {/* zName:     */ "function_list",
  /* ePragTyp:  */ PragTyp_FUNCTION_LIST,
  /* ePragFlg:  */ PragFlg_Result0,
  /* ColNames:  */ 41, 2,
  /* iArg:      */ 0 },
#endif
#endif
#if defined(SQLITE_HAS_CODEC)
 {/* zName:     */ "hexkey",
  /* ePragTyp:  */ PragTyp_HEXKEY,
  /* ePragFlg:  */ 0,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 2 },
 {/* zName:     */ "hexrekey",
  /* ePragTyp:  */ PragTyp_HEXKEY,
  /* ePragFlg:  */ 0,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 3 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
#if !defined(SQLITE_OMIT_CHECK)
 {/* zName:     */ "ignore_check_constraints",
  /* ePragTyp:  */ PragTyp_FLAG,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
................................................................................
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
 {/* zName:     */ "index_info",
  /* ePragTyp:  */ PragTyp_INDEX_INFO,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
  /* ColNames:  */ 15, 3,
  /* iArg:      */ 0 },
 {/* zName:     */ "index_list",
  /* ePragTyp:  */ PragTyp_INDEX_LIST,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
  /* ColNames:  */ 26, 5,
  /* iArg:      */ 0 },
 {/* zName:     */ "index_xinfo",
  /* ePragTyp:  */ PragTyp_INDEX_INFO,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
  /* ColNames:  */ 15, 6,
  /* iArg:      */ 1 },
#endif
................................................................................
 {/* zName:     */ "key",
  /* ePragTyp:  */ PragTyp_KEY,
  /* ePragFlg:  */ 0,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
 {/* zName:     */ "legacy_alter_table",
  /* ePragTyp:  */ PragTyp_FLAG,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ SQLITE_LegacyAlter },
 {/* zName:     */ "legacy_file_format",
  /* ePragTyp:  */ PragTyp_FLAG,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ SQLITE_LegacyFileFmt },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && SQLITE_ENABLE_LOCKING_STYLE
................................................................................
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
#endif
#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
 {/* zName:     */ "lock_status",
  /* ePragTyp:  */ PragTyp_LOCK_STATUS,
  /* ePragFlg:  */ PragFlg_Result0,
  /* ColNames:  */ 43, 2,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
 {/* zName:     */ "locking_mode",
  /* ePragTyp:  */ PragTyp_LOCKING_MODE,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_SchemaReq,
  /* ColNames:  */ 0, 0,
................................................................................
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
#if !defined(SQLITE_OMIT_VIRTUALTABLE)
#if defined(SQLITE_INTROSPECTION_PRAGMAS)
 {/* zName:     */ "module_list",
  /* ePragTyp:  */ PragTyp_MODULE_LIST,
  /* ePragFlg:  */ PragFlg_Result0,
  /* ColNames:  */ 9, 1,
  /* iArg:      */ 0 },
#endif
#endif
#endif
 {/* zName:     */ "optimize",
  /* ePragTyp:  */ PragTyp_OPTIMIZE,
  /* ePragFlg:  */ PragFlg_Result1|PragFlg_NeedSchema,
................................................................................
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
#endif
#if defined(SQLITE_INTROSPECTION_PRAGMAS)
 {/* zName:     */ "pragma_list",
  /* ePragTyp:  */ PragTyp_PRAGMA_LIST,
  /* ePragFlg:  */ PragFlg_Result0,
  /* ColNames:  */ 9, 1,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
 {/* zName:     */ "query_only",
  /* ePragTyp:  */ PragTyp_FLAG,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
................................................................................
  /* ePragTyp:  */ PragTyp_FLAG,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ SQLITE_RecTriggers },
#endif
#if defined(SQLITE_HAS_CODEC)
 {/* zName:     */ "rekey",
  /* ePragTyp:  */ PragTyp_KEY,
  /* ePragFlg:  */ 0,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 1 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
 {/* zName:     */ "reverse_unordered_selects",
  /* ePragTyp:  */ PragTyp_FLAG,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ SQLITE_ReverseOrder },
................................................................................
  /* iArg:      */ SQLITE_SqlTrace },
#endif
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) && defined(SQLITE_DEBUG)
 {/* zName:     */ "stats",
  /* ePragTyp:  */ PragTyp_STATS,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq,
  /* ColNames:  */ 21, 5,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
 {/* zName:     */ "synchronous",
  /* ePragTyp:  */ PragTyp_SYNCHRONOUS,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq|PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
 {/* zName:     */ "table_info",
  /* ePragTyp:  */ PragTyp_TABLE_INFO,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
  /* ColNames:  */ 8, 6,
  /* iArg:      */ 0 },
 {/* zName:     */ "table_xinfo",
  /* ePragTyp:  */ PragTyp_TABLE_INFO,
  /* ePragFlg:  */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
  /* ColNames:  */ 8, 7,
  /* iArg:      */ 1 },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
 {/* zName:     */ "temp_store",
  /* ePragTyp:  */ PragTyp_TEMP_STORE,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
 {/* zName:     */ "temp_store_directory",
  /* ePragTyp:  */ PragTyp_TEMP_STORE_DIRECTORY,
  /* ePragFlg:  */ PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
#endif
#if defined(SQLITE_HAS_CODEC)
 {/* zName:     */ "textkey",
  /* ePragTyp:  */ PragTyp_KEY,
  /* ePragFlg:  */ 0,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 4 },
 {/* zName:     */ "textrekey",
  /* ePragTyp:  */ PragTyp_KEY,
  /* ePragFlg:  */ 0,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 5 },
#endif
 {/* zName:     */ "threads",
  /* ePragTyp:  */ PragTyp_THREADS,
  /* ePragFlg:  */ PragFlg_Result0,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS)
 {/* zName:     */ "user_version",
................................................................................
  /* ePragTyp:  */ PragTyp_WAL_AUTOCHECKPOINT,
  /* ePragFlg:  */ 0,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ 0 },
 {/* zName:     */ "wal_checkpoint",
  /* ePragTyp:  */ PragTyp_WAL_CHECKPOINT,
  /* ePragFlg:  */ PragFlg_NeedSchema,
  /* ColNames:  */ 38, 3,
  /* iArg:      */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
 {/* zName:     */ "writable_schema",
  /* ePragTyp:  */ PragTyp_FLAG,
  /* ePragFlg:  */ PragFlg_Result0|PragFlg_NoColumns1,
  /* ColNames:  */ 0, 0,
  /* iArg:      */ SQLITE_WriteSchema|SQLITE_NoSchemaError },
#endif
};
/* Number of pragmas: 62 on by default, 81 total. */

/************** End of pragma.h **********************************************/
/************** Continuing where we left off in pragma.c *********************/

/*
** Interpret the given string as a safety level.  Return 0 for OFF,
** 1 for ON or NORMAL, 2 for FULL, and 3 for EXTRA.  Return 1 for an empty or 
................................................................................

#ifndef SQLITE_OMIT_FLAG_PRAGMAS
  case PragTyp_FLAG: {
    if( zRight==0 ){
      setPragmaResultColumnNames(v, pPragma);
      returnSingleInt(v, (db->flags & pPragma->iArg)!=0 );
    }else{
      u64 mask = pPragma->iArg;    /* Mask of bits to set or clear. */
      if( db->autoCommit==0 ){
        /* Foreign key support may not be enabled or disabled while not
        ** in auto-commit mode.  */
        mask &= ~(SQLITE_ForeignKeys);
      }
#if SQLITE_USER_AUTHENTICATION
      if( db->auth.authLevel==UAUTH_User ){
................................................................................
  ** dflt_value: The default value for the column, if any.
  ** pk:         Non-zero for PK fields.
  */
  case PragTyp_TABLE_INFO: if( zRight ){
    Table *pTab;
    pTab = sqlite3LocateTable(pParse, LOCATE_NOERR, zRight, zDb);
    if( pTab ){
      int iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema);
      int i, k;
      int nHidden = 0;
      Column *pCol;
      Index *pPk = sqlite3PrimaryKeyIndex(pTab);
      pParse->nMem = 7;
      sqlite3CodeVerifySchema(pParse, iTabDb);
      sqlite3ViewGetColumnNames(pParse, pTab);
      for(i=0, pCol=pTab->aCol; i<pTab->nCol; i++, pCol++){
        int isHidden = IsHiddenColumn(pCol);
        if( isHidden && pPragma->iArg==0 ){
          nHidden++;
          continue;
        }
        if( (pCol->colFlags & COLFLAG_PRIMKEY)==0 ){
          k = 0;
        }else if( pPk==0 ){
          k = 1;
        }else{
          for(k=1; k<=pTab->nCol && pPk->aiColumn[k-1]!=i; k++){}
        }
        assert( pCol->pDflt==0 || pCol->pDflt->op==TK_SPAN );
        sqlite3VdbeMultiLoad(v, 1, pPragma->iArg ? "issisii" : "issisi",
               i-nHidden,
               pCol->zName,
               sqlite3ColumnType(pCol,""),
               pCol->notNull ? 1 : 0,
               pCol->pDflt ? pCol->pDflt->u.zToken : 0,
               k,
               isHidden);
      }
    }
  }
  break;

#ifdef SQLITE_DEBUG
  case PragTyp_STATS: {
................................................................................
#endif

  case PragTyp_INDEX_INFO: if( zRight ){
    Index *pIdx;
    Table *pTab;
    pIdx = sqlite3FindIndex(db, zRight, zDb);
    if( pIdx ){
      int iIdxDb = sqlite3SchemaToIndex(db, pIdx->pSchema);
      int i;
      int mx;
      if( pPragma->iArg ){
        /* PRAGMA index_xinfo (newer version with more rows and columns) */
        mx = pIdx->nColumn;
        pParse->nMem = 6;
      }else{
        /* PRAGMA index_info (legacy version) */
        mx = pIdx->nKeyCol;
        pParse->nMem = 3;
      }
      pTab = pIdx->pTable;
      sqlite3CodeVerifySchema(pParse, iIdxDb);
      assert( pParse->nMem<=pPragma->nPragCName );
      for(i=0; i<mx; i++){
        i16 cnum = pIdx->aiColumn[i];
        sqlite3VdbeMultiLoad(v, 1, "iisX", i, cnum,
                             cnum<0 ? 0 : pTab->aCol[cnum].zName);
        if( pPragma->iArg ){
          sqlite3VdbeMultiLoad(v, 4, "isiX",
................................................................................

  case PragTyp_INDEX_LIST: if( zRight ){
    Index *pIdx;
    Table *pTab;
    int i;
    pTab = sqlite3FindTable(db, zRight, zDb);
    if( pTab ){
      int iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema);
      pParse->nMem = 5;
      sqlite3CodeVerifySchema(pParse, iTabDb);
      for(pIdx=pTab->pIndex, i=0; pIdx; pIdx=pIdx->pNext, i++){
        const char *azOrigin[] = { "c", "u", "pk" };
        sqlite3VdbeMultiLoad(v, 1, "isisi",
           i,
           pIdx->zName,
           IsUniqueIndex(pIdx),
           azOrigin[pIdx->idxType],
................................................................................
  case PragTyp_FUNCTION_LIST: {
    int i;
    HashElem *j;
    FuncDef *p;
    pParse->nMem = 2;
    for(i=0; i<SQLITE_FUNC_HASH_SZ; i++){
      for(p=sqlite3BuiltinFunctions.a[i]; p; p=p->u.pHash ){
        if( p->funcFlags & SQLITE_FUNC_INTERNAL ) continue;
        sqlite3VdbeMultiLoad(v, 1, "si", p->zName, 1);
      }
    }
    for(j=sqliteHashFirst(&db->aFunc); j; j=sqliteHashNext(j)){
      p = (FuncDef*)sqliteHashData(j);
      sqlite3VdbeMultiLoad(v, 1, "si", p->zName, 0);
    }
................................................................................
  case PragTyp_FOREIGN_KEY_LIST: if( zRight ){
    FKey *pFK;
    Table *pTab;
    pTab = sqlite3FindTable(db, zRight, zDb);
    if( pTab ){
      pFK = pTab->pFKey;
      if( pFK ){
        int iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema);
        int i = 0; 
        pParse->nMem = 8;
        sqlite3CodeVerifySchema(pParse, iTabDb);
        while(pFK){
          int j;
          for(j=0; j<pFK->nCol; j++){
            sqlite3VdbeMultiLoad(v, 1, "iissssss",
                   i,
                   j,
                   pFK->zTo,
................................................................................
    int addrOk;            /* Jump here if the key is OK */
    int *aiCols;           /* child to parent column mapping */

    regResult = pParse->nMem+1;
    pParse->nMem += 4;
    regKey = ++pParse->nMem;
    regRow = ++pParse->nMem;

    k = sqliteHashFirst(&db->aDb[iDb].pSchema->tblHash);
    while( k ){
      int iTabDb;
      if( zRight ){
        pTab = sqlite3LocateTable(pParse, 0, zRight, zDb);
        k = 0;
      }else{
        pTab = (Table*)sqliteHashData(k);
        k = sqliteHashNext(k);
      }
      if( pTab==0 || pTab->pFKey==0 ) continue;
      iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema);
      sqlite3CodeVerifySchema(pParse, iTabDb);
      sqlite3TableLock(pParse, iTabDb, pTab->tnum, 0, pTab->zName);
      if( pTab->nCol+regRow>pParse->nMem ) pParse->nMem = pTab->nCol + regRow;
      sqlite3OpenTable(pParse, 0, iTabDb, pTab, OP_OpenRead);
      sqlite3VdbeLoadString(v, regResult, pTab->zName);
      for(i=1, pFK=pTab->pFKey; pFK; i++, pFK=pFK->pNextFrom){
        pParent = sqlite3FindTable(db, pFK->zTo, zDb);
        if( pParent==0 ) continue;
        pIdx = 0;
        sqlite3TableLock(pParse, iTabDb, pParent->tnum, 0, pParent->zName);
        x = sqlite3FkLocateIndex(pParse, pParent, pFK, &pIdx, 0);
        if( x==0 ){
          if( pIdx==0 ){
            sqlite3OpenTable(pParse, i, iTabDb, pParent, OP_OpenRead);
          }else{
            sqlite3VdbeAddOp3(v, OP_OpenRead, i, pIdx->tnum, iTabDb);
            sqlite3VdbeSetP4KeyInfo(pParse, pIdx);
          }
        }else{
          k = 0;
          break;
        }
      }
................................................................................
      sqlite3VdbeMultiLoad(v, 1, "ss", db->aDb[i].zDbSName, zState);
    }
    break;
  }
#endif

#ifdef SQLITE_HAS_CODEC
  /* Pragma        iArg
  ** ----------   ------
  **  key           0
  **  rekey         1
  **  hexkey        2
  **  hexrekey      3
  **  textkey       4
  **  textrekey     5
  */
  case PragTyp_KEY: {
    if( zRight ){
      int n = pPragma->iArg<4 ? sqlite3Strlen30(zRight) : -1;
      if( (pPragma->iArg & 1)==0 ){
        sqlite3_key_v2(db, zDb, zRight, n);
      }else{
        sqlite3_rekey_v2(db, zDb, zRight, n);

      }
    }


    break;
  }
  case PragTyp_HEXKEY: {
    if( zRight ){
      u8 iByte;
      int i;
      char zKey[40];
      for(i=0, iByte=0; i<sizeof(zKey)*2 && sqlite3Isxdigit(zRight[i]); i++){
        iByte = (iByte<<4) + sqlite3HexToInt(zRight[i]);
        if( (i&1)!=0 ) zKey[i/2] = iByte;
      }
      if( (pPragma->iArg & 1)==0 ){
        sqlite3_key_v2(db, zDb, zKey, i/2);
      }else{
        sqlite3_rekey_v2(db, zDb, zKey, i/2);
      }
    }
    break;
  }
................................................................................
  0,                           /* xSync - sync transaction */
  0,                           /* xCommit - commit transaction */
  0,                           /* xRollback - rollback transaction */
  0,                           /* xFindFunction - function overloading */
  0,                           /* xRename - rename the table */
  0,                           /* xSavepoint */
  0,                           /* xRelease */
  0,                           /* xRollbackTo */
  0                            /* xShadowName */
};

/*
** Check to see if zTabName is really the name of a pragma.  If it is,
** then register an eponymous virtual table for that pragma and return
** a pointer to the Module object for the new virtual table.
*/
................................................................................
    }
#endif
  }
  if( db->mallocFailed ){
    rc = SQLITE_NOMEM_BKPT;
    sqlite3ResetAllSchemasOfConnection(db);
  }
  if( rc==SQLITE_OK || (db->flags&SQLITE_NoSchemaError)){
    /* Black magic: If the SQLITE_NoSchemaError flag is set, then consider
    ** the schema loaded, even if errors occurred. In this situation the 
    ** current sqlite3_prepare() operation will fail, but the following one
    ** will attempt to compile the supplied statement against whatever subset
    ** of the schema was loaded before the error occurred. The primary
    ** purpose of this is to allow access to the sqlite_master table
    ** even when its contents have been corrupted.
    */
................................................................................
  sqlite3BtreeLeaveAll(db);
  rc = sqlite3ApiExit(db, rc);
  assert( (rc&db->errMask)==rc );
  sqlite3_mutex_leave(db->mutex);
  return rc;
}

#ifdef SQLITE_ENABLE_NORMALIZE
/*
** Checks if the specified token is a table, column, or function name,
** based on the databases associated with the statement being prepared.
** If the function fails, zero is returned and pRc is filled with the
** error code.
*/
static int shouldTreatAsIdentifier(
  sqlite3 *db,        /* Database handle. */
  const char *zToken, /* Pointer to start of token to be checked */
  int nToken,         /* Length of token to be checked */
  int *pRc            /* Pointer to error code upon failure */
){
  int bFound = 0;     /* Non-zero if token is an identifier name. */
  int i, j;           /* Database and column loop indexes. */
  Schema *pSchema;    /* Schema for current database. */
  Hash *pHash;        /* Hash table of tables for current database. */
  HashElem *e;        /* Hash element for hash table iteration. */
  Table *pTab;        /* Database table for columns being checked. */

  if( sqlite3IsRowidN(zToken, nToken) ){
    return 1;
  }
  if( nToken>0 ){
    int hash = SQLITE_FUNC_HASH(sqlite3UpperToLower[(u8)zToken[0]], nToken);
    if( sqlite3FunctionSearchN(hash, zToken, nToken) ) return 1;
  }
  assert( db!=0 );
  sqlite3_mutex_enter(db->mutex);
  sqlite3BtreeEnterAll(db);
  for(i=0; i<db->nDb; i++){
    pHash = &db->aFunc;
    if( sqlite3HashFindN(pHash, zToken, nToken) ){
      bFound = 1;
      break;
    }
    pSchema = db->aDb[i].pSchema;
    if( pSchema==0 ) continue;
    pHash = &pSchema->tblHash;
    if( sqlite3HashFindN(pHash, zToken, nToken) ){
      bFound = 1;
      break;
    }
    for(e=sqliteHashFirst(pHash); e; e=sqliteHashNext(e)){
      pTab = sqliteHashData(e);
      if( pTab==0 ) continue;
      pHash = pTab->pColHash;
      if( pHash==0 ){
        pTab->pColHash = pHash = sqlite3_malloc(sizeof(Hash));
        if( pHash ){
          sqlite3HashInit(pHash);
          for(j=0; j<pTab->nCol; j++){
            Column *pCol = &pTab->aCol[j];
            sqlite3HashInsert(pHash, pCol->zName, pCol);
          }
        }else{
          *pRc = SQLITE_NOMEM_BKPT;
          bFound = 0;
          goto done;
        }
      }
      if( pHash && sqlite3HashFindN(pHash, zToken, nToken) ){
        bFound = 1;
        goto done;
      }
    }
  }
done:
  sqlite3BtreeLeaveAll(db);
  sqlite3_mutex_leave(db->mutex);
  return bFound;
}

/*
** Attempt to estimate the final output buffer size needed for the fully
** normalized version of the specified SQL string.  This should take into
** account any potential expansion that could occur (e.g. via IN clauses
** being expanded, etc).  This size returned is the total number of bytes
** including the NUL terminator.
*/
static int estimateNormalizedSize(
  const char *zSql, /* The original SQL string */
  int nSql,         /* Length of original SQL string */
  u8 prepFlags      /* The flags passed to sqlite3_prepare_v3() */
){
  int nOut = nSql + 4;
  const char *z = zSql;
  while( nOut<nSql*5 ){
    while( z[0]!=0 && z[0]!='I' && z[0]!='i' ){ z++; }
    if( z[0]==0 ) break;
    z++;
    if( z[0]!='N' && z[0]!='n' ) break;
    z++;
    while( sqlite3Isspace(z[0]) ){ z++; }
    if( z[0]!='(' ) break;
    z++;
    nOut += 5; /* ?,?,? */
  }
  return nOut;
}

/*
** Copy the current token into the output buffer while dealing with quoted
** identifiers.  By default, all letters will be converted into lowercase.
** If the bUpper flag is set, uppercase will be used.  The piOut argument
** will be used to update the target index into the output string.
*/
static void copyNormalizedToken(
  const char *zSql, /* The original SQL string */
  int iIn,          /* Current index into the original SQL string */
  int nToken,       /* Number of bytes in the current token */
  int tokenFlags,   /* Flags returned by the tokenizer */
  char *zOut,       /* The output string */
  int *piOut        /* Pointer to target index into the output string */
){
  int bQuoted = tokenFlags & SQLITE_TOKEN_QUOTED;
  int bKeyword = tokenFlags & SQLITE_TOKEN_KEYWORD;
  int j = *piOut, k = 0;
  for(; k<nToken; k++){
    if( bQuoted ){
      if( k==0 && iIn>0 ){
        zOut[j++] = '"';
        continue;
      }else if( k==nToken-1 ){
        zOut[j++] = '"';
        continue;
      }
    }
    if( bKeyword ){
      zOut[j++] = sqlite3Toupper(zSql[iIn+k]);
    }else{
      zOut[j++] = sqlite3Tolower(zSql[iIn+k]);
    }
  }
  *piOut = j;
}

/*
** Perform normalization of the SQL contained in the prepared statement and
** store the result in the zNormSql field.  The schema for the associated
** databases are consulted while performing the normalization in order to
** determine if a token appears to be an identifier.  All identifiers are
** left intact in the normalized SQL and all literals are replaced with a
** single '?'.
*/
SQLITE_PRIVATE void sqlite3Normalize(
  Vdbe *pVdbe,      /* VM being reprepared */
  const char *zSql, /* The original SQL string */
  int nSql,         /* Size of the input string in bytes */
  u8 prepFlags      /* The flags passed to sqlite3_prepare_v3() */
){
  sqlite3 *db;           /* Database handle. */
  char *z;               /* The output string */
  int nZ;                /* Size of the output string in bytes */
  int i;                 /* Next character to read from zSql[] */
  int j;                 /* Next character to fill in on z[] */
  int tokenType = 0;     /* Type of the next token */
  int prevTokenType = 0; /* Type of the previous token, except spaces */
  int n;                 /* Size of the next token */
  int nParen = 0;        /* Nesting level of parenthesis */
  Hash inHash;           /* Table of parenthesis levels to output index. */

  db = sqlite3VdbeDb(pVdbe);
  assert( db!=0 );
  assert( pVdbe->zNormSql==0 );
  if( zSql==0 ) return;
  nZ = estimateNormalizedSize(zSql, nSql, prepFlags);
  z = sqlite3DbMallocRawNN(db, nZ);
  if( z==0 ) return;
  sqlite3HashInit(&inHash);
  for(i=j=0; i<nSql && zSql[i]; i+=n){
    int flags = 0;
    if( tokenType!=TK_SPACE ) prevTokenType = tokenType;
    n = sqlite3GetTokenNormalized((unsigned char*)zSql+i, &tokenType, &flags);
    switch( tokenType ){
      case TK_SPACE: {
        break;
      }
      case TK_ILLEGAL: {
        sqlite3DbFree(db, z);
        sqlite3HashClear(&inHash);
        return;
      }
      case TK_STRING:
      case TK_INTEGER:
      case TK_FLOAT:
      case TK_VARIABLE:
      case TK_BLOB: {
        z[j++] = '?';
        break;
      }
      case TK_LP:
      case TK_RP: {
        if( tokenType==TK_LP ){
          nParen++;
          if( prevTokenType==TK_IN ){
            assert( nParen<nSql );
            sqlite3HashInsert(&inHash, zSql+nParen, SQLITE_INT_TO_PTR(j));
          }
        }else{
          int jj;
          assert( nParen<nSql );
          jj = SQLITE_PTR_TO_INT(sqlite3HashFind(&inHash, zSql+nParen));
          if( jj>0 ){
            sqlite3HashInsert(&inHash, zSql+nParen, 0);
            assert( jj+6<nZ );
            memcpy(z+jj+1, "?,?,?", 5);
            j = jj+6;
            assert( nZ-1-j>=0 );
            assert( nZ-1-j<nZ );
            memset(z+j, 0, nZ-1-j);
          }
          nParen--;
        }
        assert( nParen>=0 );
        /* Fall through */
      }
      case TK_MINUS:
      case TK_SEMI:
      case TK_PLUS:
      case TK_STAR:
      case TK_SLASH:
      case TK_REM:
      case TK_EQ:
      case TK_LE:
      case TK_NE:
      case TK_LSHIFT:
      case TK_LT:
      case TK_RSHIFT:
      case TK_GT:
      case TK_GE:
      case TK_BITOR:
      case TK_CONCAT:
      case TK_COMMA:
      case TK_BITAND:
      case TK_BITNOT:
      case TK_DOT:
      case TK_IN:
      case TK_IS:
      case TK_NOT:
      case TK_NULL:
      case TK_ID: {
        if( tokenType==TK_NULL ){
          if( prevTokenType==TK_IS || prevTokenType==TK_NOT ){
            /* NULL is a keyword in this case, not a literal value */
          }else{
            /* Here the NULL is a literal value */
            z[j++] = '?';
            break;
          }
        }
        if( j>0 && sqlite3IsIdChar(z[j-1]) && sqlite3IsIdChar(zSql[i]) ){
          z[j++] = ' ';
        }
        if( tokenType==TK_ID ){
          int i2 = i, n2 = n, rc = SQLITE_OK;
          if( nParen>0 ){
            assert( nParen<nSql );
            sqlite3HashInsert(&inHash, zSql+nParen, 0);
          }
          if( flags&SQLITE_TOKEN_QUOTED ){ i2++; n2-=2; }
          if( shouldTreatAsIdentifier(db, zSql+i2, n2, &rc)==0 ){
            if( rc!=SQLITE_OK ){
              sqlite3DbFree(db, z);
              sqlite3HashClear(&inHash);
              return;
            }
            if( sqlite3_keyword_check(zSql+i2, n2)==0 ){
              z[j++] = '?';
              break;
            }
          }
        }
        copyNormalizedToken(zSql, i, n, flags, z, &j);
        break;
      }
    }
  }
  assert( j<nZ && "one" );
  while( j>0 && z[j-1]==' ' ){ j--; }
  if( j>0 && z[j-1]!=';' ){ z[j++] = ';'; }
  z[j] = 0;
  assert( j<nZ && "two" );
  pVdbe->zNormSql = z;
  sqlite3HashClear(&inHash);
}
#endif /* SQLITE_ENABLE_NORMALIZE */

/*
** Rerun the compilation of a statement after a schema change.
**
** If the statement is successfully recompiled, return SQLITE_OK. Otherwise,
** if the statement cannot be recompiled because another connection has
** locked the sqlite3_master table, return SQLITE_LOCKED. If any other error
** occurs, return SQLITE_SCHEMA.
................................................................................
  int i;
  int nDefer = 0;
  ExprList *pExtra = 0;
  for(i=0; i<pEList->nExpr; i++){
    struct ExprList_item *pItem = &pEList->a[i];
    if( pItem->u.x.iOrderByCol==0 ){
      Expr *pExpr = pItem->pExpr;
      Table *pTab = pExpr->y.pTab;
      if( pExpr->op==TK_COLUMN && pExpr->iColumn>=0 && pTab && !IsVirtual(pTab)
       && (pTab->aCol[pExpr->iColumn].colFlags & COLFLAG_SORTERREF)
      ){
        int j;
        for(j=0; j<nDefer; j++){
          if( pSort->aDefer[j].iCsr==pExpr->iTable ) break;
        }
................................................................................
              pPk = sqlite3PrimaryKeyIndex(pTab);
              nKey = pPk->nKeyCol;
            }
            for(k=0; k<nKey; k++){
              Expr *pNew = sqlite3PExpr(pParse, TK_COLUMN, 0, 0);
              if( pNew ){
                pNew->iTable = pExpr->iTable;
                pNew->y.pTab = pExpr->y.pTab;
                pNew->iColumn = pPk ? pPk->aiColumn[k] : -1;
                pExtra = sqlite3ExprListAppend(pParse, pExtra, pNew);
              }
            }
            pSort->aDefer[nDefer].pTab = pExpr->y.pTab;
            pSort->aDefer[nDefer].iCsr = pExpr->iTable;
            pSort->aDefer[nDefer].nKey = nKey;
            nDefer++;
          }
        }
        pItem->bSorterRef = 1;
      }
................................................................................
        ** This is not a problem, as the column type of "t1.col" is never
        ** used. When columnType() is called on the expression 
        ** "(SELECT t1.col)", the correct type is returned (see the TK_SELECT
        ** branch below.  */
        break;
      }

      assert( pTab && pExpr->y.pTab==pTab );
      if( pS ){
        /* The "table" is actually a sub-select or a view in the FROM clause
        ** of the SELECT statement. Return the declaration type and origin
        ** data for the result-set column of the sub-select.
        */
        if( iCol>=0 && iCol<pS->pEList->nExpr ){
          /* If iCol is less than zero, then the expression requests the
................................................................................
  srcName = (db->flags & SQLITE_ShortColNames)!=0 || fullName;
  sqlite3VdbeSetNumCols(v, pEList->nExpr);
  for(i=0; i<pEList->nExpr; i++){
    Expr *p = pEList->a[i].pExpr;

    assert( p!=0 );
    assert( p->op!=TK_AGG_COLUMN );  /* Agg processing has not run yet */
    assert( p->op!=TK_COLUMN || p->y.pTab!=0 ); /* Covering idx not yet coded */
    if( pEList->a[i].zName ){
      /* An AS clause always takes first priority */
      char *zName = pEList->a[i].zName;
      sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_TRANSIENT);
    }else if( srcName && p->op==TK_COLUMN ){
      char *zCol;
      int iCol = p->iColumn;
      pTab = p->y.pTab;
      assert( pTab!=0 );
      if( iCol<0 ) iCol = pTab->iPKey;
      assert( iCol==-1 || (iCol>=0 && iCol<pTab->nCol) );
      if( iCol<0 ){
        zCol = "rowid";
      }else{
        zCol = pTab->aCol[iCol].zName;
................................................................................
        pColExpr = pColExpr->pRight;
        assert( pColExpr!=0 );
      }
      assert( pColExpr->op!=TK_AGG_COLUMN );
      if( pColExpr->op==TK_COLUMN ){
        /* For columns use the column name name */
        int iCol = pColExpr->iColumn;
        Table *pTab = pColExpr->y.pTab;
        assert( pTab!=0 );
        if( iCol<0 ) iCol = pTab->iPKey;
        zName = iCol>=0 ? pTab->aCol[iCol].zName : "rowid";
      }else if( pColExpr->op==TK_ID ){
        assert( !ExprHasProperty(pColExpr, EP_IntValue) );
        zName = pColExpr->u.zToken;
      }else{
................................................................................
  SelectDest destQueue;         /* SelectDest targetting the Queue table */
  int i;                        /* Loop counter */
  int rc;                       /* Result code */
  ExprList *pOrderBy;           /* The ORDER BY clause */
  Expr *pLimit;                 /* Saved LIMIT and OFFSET */
  int regLimit, regOffset;      /* Registers used by LIMIT and OFFSET */

#ifndef SQLITE_OMIT_WINDOWFUNC
  if( p->pWin ){
    sqlite3ErrorMsg(pParse, "cannot use window functions in recursive queries");
    return;
  }
#endif

  /* Obtain authorization to do a recursive query */
  if( sqlite3AuthCheck(pParse, SQLITE_RECURSIVE, 0, 0, 0) ) return;

  /* Process the LIMIT and OFFSET clauses, if they exist */
  addrBreak = sqlite3VdbeMakeLabel(v);
  p->nSelectRow = 320;  /* 4 billion rows */
  computeLimitRegisters(pParse, p, addrBreak);
................................................................................
#endif

  return 1;
}
#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */

/*
** A structure to keep track of all of the column values that are fixed to
** a known value due to WHERE clause constraints of the form COLUMN=VALUE.
*/
typedef struct WhereConst WhereConst;
struct WhereConst {
  Parse *pParse;   /* Parsing context */
  int nConst;      /* Number for COLUMN=CONSTANT terms */
  int nChng;       /* Number of times a constant is propagated */
  Expr **apExpr;   /* [i*2] is COLUMN and [i*2+1] is VALUE */
};

/*
** Add a new entry to the pConst object.  Except, do not add duplicate
** pColumn entires.
*/
static void constInsert(
  WhereConst *pConst,      /* The WhereConst into which we are inserting */

  Expr *pColumn,           /* The COLUMN part of the constraint */
  Expr *pValue             /* The VALUE part of the constraint */
){
  int i;
  assert( pColumn->op==TK_COLUMN );

  /* 2018-10-25 ticket [cf5ed20f]
  ** Make sure the same pColumn is not inserted more than once */
  for(i=0; i<pConst->nConst; i++){
    const Expr *pExpr = pConst->apExpr[i*2];
    assert( pExpr->op==TK_COLUMN );
    if( pExpr->iTable==pColumn->iTable
     && pExpr->iColumn==pColumn->iColumn
    ){
      return;  /* Already present.  Return without doing anything. */
    }
  }

  pConst->nConst++;
  pConst->apExpr = sqlite3DbReallocOrFree(pConst->pParse->db, pConst->apExpr,
                         pConst->nConst*2*sizeof(Expr*));
  if( pConst->apExpr==0 ){
    pConst->nConst = 0;
  }else{
................................................................................
#ifndef SQLITE_OMIT_FLOATING_POINT
  if( pTab->aCol[i].affinity==SQLITE_AFF_REAL ){
    sqlite3VdbeAddOp1(v, OP_RealAffinity, iReg);
  }
#endif
}

/*
** Check to see if column iCol of index pIdx references any of the
** columns defined by aXRef and chngRowid.  Return true if it does
** and false if not.  This is an optimization.  False-positives are a
** performance degradation, but false-negatives can result in a corrupt
** index and incorrect answers.
**
** aXRef[j] will be non-negative if column j of the original table is
** being updated.  chngRowid will be true if the rowid of the table is
** being updated.
*/
static int indexColumnIsBeingUpdated(
  Index *pIdx,      /* The index to check */
  int iCol,         /* Which column of the index to check */
  int *aXRef,       /* aXRef[j]>=0 if column j is being updated */
  int chngRowid     /* true if the rowid is being updated */
){
  i16 iIdxCol = pIdx->aiColumn[iCol];
  assert( iIdxCol!=XN_ROWID ); /* Cannot index rowid */
  if( iIdxCol>=0 ){
    return aXRef[iIdxCol]>=0;
  }
  assert( iIdxCol==XN_EXPR );
  assert( pIdx->aColExpr!=0 );
  assert( pIdx->aColExpr->a[iCol].pExpr!=0 );
  return sqlite3ExprReferencesUpdatedColumn(pIdx->aColExpr->a[iCol].pExpr,
                                            aXRef,chngRowid);
}

/*
** Check to see if index pIdx is a partial index whose conditional
** expression might change values due to an UPDATE.  Return true if
** the index is subject to change and false if the index is guaranteed
** to be unchanged.  This is an optimization.  False-positives are a
** performance degradation, but false-negatives can result in a corrupt
** index and incorrect answers.
**
** aXRef[j] will be non-negative if column j of the original table is
** being updated.  chngRowid will be true if the rowid of the table is
** being updated.
*/
static int indexWhereClauseMightChange(
  Index *pIdx,      /* The index to check */
  int *aXRef,       /* aXRef[j]>=0 if column j is being updated */
  int chngRowid     /* true if the rowid is being updated */
){
  if( pIdx->pPartIdxWhere==0 ) return 0;
  return sqlite3ExprReferencesUpdatedColumn(pIdx->pPartIdxWhere,
                                            aXRef, chngRowid);
}

/*
** Process an UPDATE statement.
**
**   UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL;
**          \_______/ \________/     \______/       \________________/
*            onError   pTabList      pChanges             pWhere
*/
................................................................................
  pTabList->a[0].colUsed = IsVirtual(pTab) ? ALLBITS : 0;

  hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngKey);

  /* There is one entry in the aRegIdx[] array for each index on the table
  ** being updated.  Fill in aRegIdx[] with a register number that will hold
  ** the key for accessing each index.


  */
  for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
    int reg;
    if( chngKey || hasFK>1 || pIdx==pPk
     || indexWhereClauseMightChange(pIdx,aXRef,chngRowid)
    ){
      reg = ++pParse->nMem;
      pParse->nMem += pIdx->nColumn;
    }else{
      reg = 0;
      for(i=0; i<pIdx->nKeyCol; i++){
        if( indexColumnIsBeingUpdated(pIdx, i, aXRef, chngRowid) ){

          reg = ++pParse->nMem;
          pParse->nMem += pIdx->nColumn;
          if( (onError==OE_Replace)
           || (onError==OE_Default && pIdx->onError==OE_Replace) 
          ){
            bReplace = 1;
          }
................................................................................

  /* Populate the argument registers. */
  for(i=0; i<pTab->nCol; i++){
    if( aXRef[i]>=0 ){
      sqlite3ExprCode(pParse, pChanges->a[aXRef[i]].pExpr, regArg+2+i);
    }else{
      sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, i, regArg+2+i);
      sqlite3VdbeChangeP5(v, OPFLAG_NOCHNG);/* Enable sqlite3_vtab_nochange() */
    }
  }
  if( HasRowid(pTab) ){
    sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg);
    if( pRowid ){
      sqlite3ExprCode(pParse, pRowid, regArg+1);
    }else{
................................................................................
  saved_flags = db->flags;
  saved_mDbFlags = db->mDbFlags;
  saved_nChange = db->nChange;
  saved_nTotalChange = db->nTotalChange;
  saved_mTrace = db->mTrace;
  db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks;
  db->mDbFlags |= DBFLAG_PreferBuiltin | DBFLAG_Vacuum;
  db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder
                   | SQLITE_Defensive | SQLITE_CountRows);
  db->mTrace = 0;

  zDbMain = db->aDb[iDb].zDbSName;
  pMain = db->aDb[iDb].pBt;
  isMemDb = sqlite3PagerIsMemdb(sqlite3BtreePager(pMain));

  /* Attach the temporary database as 'vacuum_db'. The synchronous pragma
................................................................................
SQLITE_PRIVATE void sqlite3VtabBeginParse(
  Parse *pParse,        /* Parsing context */
  Token *pName1,        /* Name of new table, or database name */
  Token *pName2,        /* Name of new table or NULL */
  Token *pModuleName,   /* Name of the module for the virtual table */
  int ifNotExists       /* No error if the table already exists */
){

  Table *pTable;        /* The new virtual table */
  sqlite3 *db;          /* Database connection */

  sqlite3StartTable(pParse, pName1, pName2, 0, 0, 1, ifNotExists);
  pTable = pParse->pNewTable;
  if( pTable==0 ) return;
  assert( 0==pTable->pIndex );

  db = pParse->db;



  assert( pTable->nModuleArg==0 );
  addModuleArgument(db, pTable, sqlite3NameFromToken(db, pModuleName));
  addModuleArgument(db, pTable, 0);
  addModuleArgument(db, pTable, sqlite3DbStrDup(db, pTable->zName));
  assert( (pParse->sNameToken.z==pName2->z && pName2->z!=0)
       || (pParse->sNameToken.z==pName1->z && pName2->z==0)
................................................................................
#ifndef SQLITE_OMIT_AUTHORIZATION
  /* Creating a virtual table invokes the authorization callback twice.
  ** The first invocation, to obtain permission to INSERT a row into the
  ** sqlite_master table, has already been made by sqlite3StartTable().
  ** The second call, to obtain permission to create the table, is made now.
  */
  if( pTable->azModuleArg ){
    int iDb = sqlite3SchemaToIndex(db, pTable->pSchema);
    assert( iDb>=0 ); /* The database the table is being created in */
    sqlite3AuthCheck(pParse, SQLITE_CREATE_VTABLE, pTable->zName, 
            pTable->azModuleArg[0], pParse->db->aDb[iDb].zDbSName);
  }
#endif
}

/*
................................................................................
  void *pArg = 0;
  FuncDef *pNew;
  int rc = 0;

  /* Check to see the left operand is a column in a virtual table */
  if( NEVER(pExpr==0) ) return pDef;
  if( pExpr->op!=TK_COLUMN ) return pDef;
  pTab = pExpr->y.pTab;
  if( pTab==0 ) return pDef;
  if( !IsVirtual(pTab) ) return pDef;
  pVtab = sqlite3GetVTable(db, pTab)->pVtab;
  assert( pVtab!=0 );
  assert( pVtab->pModule!=0 );
  pMod = (sqlite3_module *)pVtab->pModule;
  if( pMod->xFindFunction==0 ) return pDef;
................................................................................
  WhereLoop *pNew;          /* Template WhereLoop */
  WhereOrSet *pOrSet;       /* Record best loops here, if not NULL */
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
  UnpackedRecord *pRec;     /* Probe for stat4 (if required) */
  int nRecValid;            /* Number of valid fields currently in pRec */
#endif
  unsigned int bldFlags;    /* SQLITE_BLDF_* flags */
  unsigned int iPlanLimit;  /* Search limiter */
};

/* Allowed values for WhereLoopBuider.bldFlags */
#define SQLITE_BLDF_INDEXED  0x0001   /* An index is used */
#define SQLITE_BLDF_UNIQUE   0x0002   /* All keys of a UNIQUE index used */

/* The WhereLoopBuilder.iPlanLimit is used to limit the number of
** index+constraint combinations the query planner will consider for a
** particular query.  If this parameter is unlimited, then certain
** pathological queries can spend excess time in the sqlite3WhereBegin()
** routine.  The limit is high enough that is should not impact real-world
** queries.
**
** SQLITE_QUERY_PLANNER_LIMIT is the baseline limit.  The limit is
** increased by SQLITE_QUERY_PLANNER_LIMIT_INCR before each term of the FROM
** clause is processed, so that every table in a join is guaranteed to be
** able to propose a some index+constraint combinations even if the initial
** baseline limit was exhausted by prior tables of the join.
*/
#ifndef SQLITE_QUERY_PLANNER_LIMIT
# define SQLITE_QUERY_PLANNER_LIMIT 20000
#endif
#ifndef SQLITE_QUERY_PLANNER_LIMIT_INCR
# define SQLITE_QUERY_PLANNER_LIMIT_INCR 1000
#endif

/*
** The WHERE clause processing routine has two halves.  The
** first part does the start of the WHERE loop and the second
** half does the tail of the WHERE loop.  An instance of
** this structure is returned by the first half and passed
** into the second half to give some continuity.
**
................................................................................
    ExprList *pLhs = 0;         /* New LHS after mods */
    int i;                      /* Loop counter */
    Select *pSelect;            /* Pointer to the SELECT on the RHS */

    for(i=iEq; i<pLoop->nLTerm; i++){
      if( pLoop->aLTerm[i]->pExpr==pX ){
        int iField = pLoop->aLTerm[i]->iField - 1;
        if( pOrigRhs->a[iField].pExpr==0 ) continue; /* Duplicate PK column */
        pRhs = sqlite3ExprListAppend(pParse, pRhs, pOrigRhs->a[iField].pExpr);
        pOrigRhs->a[iField].pExpr = 0;
        assert( pOrigLhs->a[iField].pExpr!=0 );
        pLhs = sqlite3ExprListAppend(pParse, pLhs, pOrigLhs->a[iField].pExpr);
        pOrigLhs->a[iField].pExpr = 0;
      }
    }
................................................................................
*/
static int whereIndexExprTransNode(Walker *p, Expr *pExpr){
  IdxExprTrans *pX = p->u.pIdxTrans;
  if( sqlite3ExprCompare(0, pExpr, pX->pIdxExpr, pX->iTabCur)==0 ){
    pExpr->op = TK_COLUMN;
    pExpr->iTable = pX->iIdxCur;
    pExpr->iColumn = pX->iIdxCol;
    pExpr->y.pTab = 0;
    return WRC_Prune;
  }else{
    return WRC_Continue;
  }
}

/*
................................................................................
        */
        if( sqlite3Isdigit(zNew[0])
         || zNew[0]=='-'
         || (zNew[0]+1=='0' && iTo==1)
        ){
          if( pLeft->op!=TK_COLUMN 
           || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT 
           || IsVirtual(pLeft->y.pTab)  /* Value might be numeric */
          ){
            sqlite3ExprDelete(db, pPrefix);
            sqlite3ValueFree(pVal);
            return 0;
          }
        }
      }
................................................................................
    ** virtual table on their second argument, which is the same as
    ** the left-hand side operand in their in-fix form.
    **
    **       vtab_column MATCH expression
    **       MATCH(expression,vtab_column)
    */
    pCol = pList->a[1].pExpr;
    if( pCol->op==TK_COLUMN && IsVirtual(pCol->y.pTab) ){
      for(i=0; i<ArraySize(aOp); i++){
        if( sqlite3StrICmp(pExpr->u.zToken, aOp[i].zOp)==0 ){
          *peOp2 = aOp[i].eOp2;
          *ppRight = pList->a[0].pExpr;
          *ppLeft = pCol;
          return 1;
        }
................................................................................
    **      OVERLOADED(vtab_column,expression)
    **
    ** Historically, xFindFunction expected to see lower-case function
    ** names.  But for this use case, xFindFunction is expected to deal
    ** with function names in an arbitrary case.
    */
    pCol = pList->a[0].pExpr;
    if( pCol->op==TK_COLUMN && IsVirtual(pCol->y.pTab) ){
      sqlite3_vtab *pVtab;
      sqlite3_module *pMod;
      void (*xNotUsed)(sqlite3_context*,int,sqlite3_value**);
      void *pNotUsed;
      pVtab = sqlite3GetVTable(db, pCol->y.pTab)->pVtab;
      assert( pVtab!=0 );
      assert( pVtab->pModule!=0 );
      pMod = (sqlite3_module *)pVtab->pModule;
      if( pMod->xFindFunction!=0 ){
        i = pMod->xFindFunction(pVtab,2, pExpr->u.zToken, &xNotUsed, &pNotUsed);
        if( i>=SQLITE_INDEX_CONSTRAINT_FUNCTION ){
          *peOp2 = i;
................................................................................
        }
      }
    }
  }else if( pExpr->op==TK_NE || pExpr->op==TK_ISNOT || pExpr->op==TK_NOTNULL ){
    int res = 0;
    Expr *pLeft = pExpr->pLeft;
    Expr *pRight = pExpr->pRight;
    if( pLeft->op==TK_COLUMN && IsVirtual(pLeft->y.pTab) ){
      res++;
    }
    if( pRight && pRight->op==TK_COLUMN && IsVirtual(pRight->y.pTab) ){
      res++;
      SWAP(Expr*, pLeft, pRight);
    }
    *ppLeft = pLeft;
    *ppRight = pRight;
    if( pExpr->op==TK_NE ) *peOp2 = SQLITE_INDEX_CONSTRAINT_NE;
    if( pExpr->op==TK_ISNOT ) *peOp2 = SQLITE_INDEX_CONSTRAINT_ISNOT;
................................................................................
  ** virtual term of that form.
  **
  ** Note that the virtual term must be tagged with TERM_VNULL.
  */
  if( pExpr->op==TK_NOTNULL
   && pExpr->pLeft->op==TK_COLUMN
   && pExpr->pLeft->iColumn>=0
   && !ExprHasProperty(pExpr, EP_FromJoin)
   && OptimizationEnabled(db, SQLITE_Stat34)
  ){
    Expr *pNewExpr;
    Expr *pLeft = pExpr->pLeft;
    int idxNew;
    WhereTerm *pNewTerm;

................................................................................
  Expr *pTerm;
  if( pItem->fg.isTabFunc==0 ) return;
  pTab = pItem->pTab;
  assert( pTab!=0 );
  pArgs = pItem->u1.pFuncArg;
  if( pArgs==0 ) return;
  for(j=k=0; j<pArgs->nExpr; j++){
    Expr *pRhs;
    while( k<pTab->nCol && (pTab->aCol[k].colFlags & COLFLAG_HIDDEN)==0 ){k++;}
    if( k>=pTab->nCol ){
      sqlite3ErrorMsg(pParse, "too many arguments on %s() - max %d",
                      pTab->zName, j);
      return;
    }
    pColRef = sqlite3ExprAlloc(pParse->db, TK_COLUMN, 0, 0);
    if( pColRef==0 ) return;
    pColRef->iTable = pItem->iCursor;
    pColRef->iColumn = k++;
    pColRef->y.pTab = pTab;
    pRhs = sqlite3PExpr(pParse, TK_UPLUS, 
        sqlite3ExprDup(pParse->db, pArgs->a[j].pExpr, 0), 0);
    pTerm = sqlite3PExpr(pParse, TK_EQ, pColRef, pRhs);
    whereClauseInsert(pWC, pTerm, TERM_DYNAMIC);
  }
}

/************** End of whereexpr.c *******************************************/
/************** Begin file where.c *******************************************/
/*
................................................................................
  if( pPartial ) sqlite3VdbeResolveLabel(v, iContinue);
  if( pTabItem->fg.viaCoroutine ){
    sqlite3VdbeChangeP2(v, addrCounter, regBase+n);
    testcase( pParse->db->mallocFailed );
    translateColumnToCopy(pParse, addrTop, pLevel->iTabCur,
                          pTabItem->regResult, 1);
    sqlite3VdbeGoto(v, addrTop);

  }else{
    sqlite3VdbeAddOp2(v, OP_Next, pLevel->iTabCur, addrTop+1); VdbeCoverage(v);
  }
  sqlite3VdbeChangeP5(v, SQLITE_STMTSTATUS_AUTOINDEX);
  sqlite3VdbeJumpHere(v, addrTop);
  sqlite3ReleaseTempReg(pParse, regRecord);
  
................................................................................

/*
** The table object reference passed as the second argument to this function
** must represent a virtual table. This function invokes the xBestIndex()
** method of the virtual table with the sqlite3_index_info object that
** comes in as the 3rd argument to this function.
**
** If an error occurs, pParse is populated with an error message and an
** appropriate error code is returned.  A return of SQLITE_CONSTRAINT from
** xBestIndex is not considered an error.  SQLITE_CONSTRAINT indicates that
** the current configuration of "unusable" flags in sqlite3_index_info can
** not result in a valid plan.
**
** Whether or not an error is returned, it is the responsibility of the
** caller to eventually free p->idxStr if p->needToFreeIdxStr indicates
** that this is required.
*/
static int vtabBestIndex(Parse *pParse, Table *pTab, sqlite3_index_info *p){
  sqlite3_vtab *pVtab = sqlite3GetVTable(pParse->db, pTab)->pVtab;
  int rc;

  TRACE_IDX_INPUTS(p);
  rc = pVtab->pModule->xBestIndex(pVtab, p);
  TRACE_IDX_OUTPUTS(p);

  if( rc!=SQLITE_OK && rc!=SQLITE_CONSTRAINT ){
    if( rc==SQLITE_NOMEM ){
      sqlite3OomFault(pParse->db);
    }else if( !pVtab->zErrMsg ){
      sqlite3ErrorMsg(pParse, "%s", sqlite3ErrStr(rc));
    }else{
      sqlite3ErrorMsg(pParse, "%s", pVtab->zErrMsg);
    }
  }
  sqlite3_free(pVtab->zErrMsg);
  pVtab->zErrMsg = 0;












  return rc;
}
#endif /* !defined(SQLITE_OMIT_VIRTUALTABLE) */

#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
/*
** Estimate the location of a particular key among all keys in an
** index.  Store the results in aStat as follows:
................................................................................
*/
static int whereLoopInsert(WhereLoopBuilder *pBuilder, WhereLoop *pTemplate){
  WhereLoop **ppPrev, *p;
  WhereInfo *pWInfo = pBuilder->pWInfo;
  sqlite3 *db = pWInfo->pParse->db;
  int rc;

  /* Stop the search once we hit the query planner search limit */
  if( pBuilder->iPlanLimit==0 ){
    WHERETRACE(0xffffffff,("=== query planner search limit reached ===\n"));
    if( pBuilder->pOrSet ) pBuilder->pOrSet->n = 0;
    return SQLITE_DONE;
  }
  pBuilder->iPlanLimit--;

  /* If pBuilder->pOrSet is defined, then only keep track of the costs
  ** and prereqs.
  */
  if( pBuilder->pOrSet!=0 ){
    if( pTemplate->nLTerm ){
#if WHERETRACE_ENABLED
      u16 n = pBuilder->pOrSet->n;
................................................................................
  pIdxInfo->estimatedCost = SQLITE_BIG_DBL / (double)2;
  pIdxInfo->estimatedRows = 25;
  pIdxInfo->idxFlags = 0;
  pIdxInfo->colUsed = (sqlite3_int64)pSrc->colUsed;

  /* Invoke the virtual table xBestIndex() method */
  rc = vtabBestIndex(pParse, pSrc->pTab, pIdxInfo);
  if( rc ){
    if( rc==SQLITE_CONSTRAINT ){
      /* If the xBestIndex method returns SQLITE_CONSTRAINT, that means
      ** that the particular combination of parameters provided is unusable.
      ** Make no entries in the loop table.
      */
      WHERETRACE(0xffff, ("  ^^^^--- non-viable plan rejected!\n"));
      return SQLITE_OK;
    }
    return rc;
  }

  mxTerm = -1;
  assert( pNew->nLSlot>=nConstraint );
  for(i=0; i<nConstraint; i++) pNew->aLTerm[i] = 0;
  pNew->u.vtab.omitMask = 0;
  pIdxCons = *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint;
  for(i=0; i<nConstraint; i++, pIdxCons++){
................................................................................
  int rc = SQLITE_OK;
  WhereLoop *pNew;
  u8 priorJointype = 0;

  /* Loop over the tables in the join, from left to right */
  pNew = pBuilder->pNew;
  whereLoopInit(pNew);
  pBuilder->iPlanLimit = SQLITE_QUERY_PLANNER_LIMIT;
  for(iTab=0, pItem=pTabList->a; pItem<pEnd; iTab++, pItem++){
    Bitmask mUnusable = 0;
    pNew->iTab = iTab;
    pBuilder->iPlanLimit += SQLITE_QUERY_PLANNER_LIMIT_INCR;
    pNew->maskSelf = sqlite3WhereGetMask(&pWInfo->sMaskSet, pItem->iCursor);
    if( ((pItem->fg.jointype|priorJointype) & (JT_LEFT|JT_CROSS))!=0 ){
      /* This condition is true when pItem is the FROM clause term on the
      ** right-hand-side of a LEFT or CROSS JOIN.  */
      mPrereq = mPrior;
    }
    priorJointype = pItem->fg.jointype;
................................................................................
    {
      rc = whereLoopAddBtree(pBuilder, mPrereq);
    }
    if( rc==SQLITE_OK && pBuilder->pWC->hasOr ){
      rc = whereLoopAddOr(pBuilder, mPrereq, mUnusable);
    }
    mPrior |= pNew->maskSelf;
    if( rc || db->mallocFailed ){
      if( rc==SQLITE_DONE ){
        /* We hit the query planner search limit set by iPlanLimit */
        sqlite3_log(SQLITE_WARNING, "abbreviated query algorithm search");
        rc = SQLITE_OK;
      }else{
        break;
      }
    }
  }

  whereLoopClear(db, pNew);
  return rc;
}

/*
................................................................................
      if( i==nSrc ) return WRC_Continue;
    }
  }

  switch( pExpr->op ){

    case TK_FUNCTION:
      if( !ExprHasProperty(pExpr, EP_WinFunc) ){
        break;
      }else{
        Window *pWin;
        for(pWin=p->pWin; pWin; pWin=pWin->pNextWin){
          if( pExpr->y.pWin==pWin ){
            assert( pWin->pOwner==pExpr );
            return WRC_Prune;
          }
        }
      }
      /* Fall through.  */

................................................................................
** any SQL window functions, this function is a no-op. Otherwise, it 
** rewrites the SELECT statement so that window function xStep functions
** are invoked in the correct order as described under "SELECT REWRITING"
** at the top of this file.
*/
SQLITE_PRIVATE int sqlite3WindowRewrite(Parse *pParse, Select *p){
  int rc = SQLITE_OK;
  if( p->pWin && p->pPrior==0 ){
    Vdbe *v = sqlite3GetVdbe(pParse);
    sqlite3 *db = pParse->db;
    Select *pSub = 0;             /* The subquery */
    SrcList *pSrc = p->pSrc;
    Expr *pWhere = p->pWhere;
    ExprList *pGroupBy = p->pGroupBy;
    Expr *pHaving = p->pHaving;
................................................................................
}

/*
** Attach window object pWin to expression p.
*/
SQLITE_PRIVATE void sqlite3WindowAttach(Parse *pParse, Expr *p, Window *pWin){
  if( p ){
    assert( p->op==TK_FUNCTION );
    /* This routine is only called for the parser.  If pWin was not
    ** allocated due to an OOM, then the parser would fail before ever
    ** invoking this routine */
    if( ALWAYS(pWin) ){
      p->y.pWin = pWin;
      ExprSetProperty(p, EP_WinFunc);
      pWin->pOwner = p;
      if( p->flags & EP_Distinct ){
        sqlite3ErrorMsg(pParse,
           "DISTINCT is not supported for window functions");
      }
    }
  }else{
................................................................................
/*
** Allocate and return a duplicate of the Window object indicated by the
** third argument. Set the Window.pOwner field of the new object to
** pOwner.
*/
SQLITE_PRIVATE Window *sqlite3WindowDup(sqlite3 *db, Expr *pOwner, Window *p){
  Window *pNew = 0;
  if( ALWAYS(p) ){
    pNew = sqlite3DbMallocZero(db, sizeof(Window));
    if( pNew ){
      pNew->zName = sqlite3DbStrDup(db, p->zName);
      pNew->pFilter = sqlite3ExprDup(db, p->pFilter, 0);
      pNew->pPartition = sqlite3ExprListDup(db, p->pPartition, 0);
      pNew->pOrderBy = sqlite3ExprListDup(db, p->pOrderBy, 0);
      pNew->eType = p->eType;
................................................................................
** of this template is copied straight through into the generate parser
** source file.
**
** The following is the concatenation of all %include directives from the
** input grammar file:
*/
/* #include <stdio.h> */
/* #include <assert.h> */
/************ Begin %include sections from the grammar ************************/

/* #include "sqliteInt.h" */

/*
** Disable all error recovery processing in the parser push-down
** automaton.
................................................................................
      p->op = (u8)op;
      p->affinity = 0;
      p->flags = EP_Leaf;
      p->iAgg = -1;
      p->pLeft = p->pRight = 0;
      p->x.pList = 0;
      p->pAggInfo = 0;
      p->y.pTab = 0;
      p->op2 = 0;
      p->iTable = 0;
      p->iColumn = 0;



      p->u.zToken = (char*)&p[1];
      memcpy(p->u.zToken, t.z, t.n);
      p->u.zToken[t.n] = 0;
      if( sqlite3Isquote(p->u.zToken[0]) ){
        if( p->u.zToken[0]=='"' ) p->flags |= EP_DblQuoted;
        sqlite3Dequote(p->u.zToken);
      }
................................................................................
             yyTracePrompt,yyTokenName[yymajor]);
        }
#endif
        yy_destructor(yypParser, (YYCODETYPE)yymajor, &yyminorunion);
        yymajor = YYNOCODE;
      }else{
        while( yypParser->yytos >= yypParser->yystack

            && (yyact = yy_find_reduce_action(
                        yypParser->yytos->stateno,
                        YYERRORSYMBOL)) > YY_MAX_SHIFTREDUCE
        ){
          yy_pop_parser_stack(yypParser);
        }
        if( yypParser->yytos < yypParser->yystack || yymajor==0 ){
          yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion);
          yy_parse_failed(yypParser);
#ifndef YYNOERRORRECOVERY
................................................................................
    }
  }
  while( IdChar(z[i]) ){ i++; }
  *tokenType = TK_ID;
  return i;
}

#ifdef SQLITE_ENABLE_NORMALIZE
/*
** Return the length (in bytes) of the token that begins at z[0].
** Store the token type in *tokenType before returning.  If flags has
** SQLITE_TOKEN_NORMALIZE flag enabled, use the identifier token type
** for keywords.  Add SQLITE_TOKEN_QUOTED to flags if the token was
** actually a quoted identifier.  Add SQLITE_TOKEN_KEYWORD to flags
** if the token was recognized as a keyword; this is useful when the
** SQLITE_TOKEN_NORMALIZE flag is used, because it enables the caller
** to differentiate between a keyword being treated as an identifier
** (for normalization purposes) and an actual identifier.
*/
SQLITE_PRIVATE int sqlite3GetTokenNormalized(
  const unsigned char *z,
  int *tokenType,
  int *flags
){
  int n;
  unsigned char iClass = aiClass[*z];
  if( iClass==CC_KYWD ){
    int i;
    for(i=1; aiClass[z[i]]<=CC_KYWD; i++){}
    if( IdChar(z[i]) ){
      /* This token started out using characters that can appear in keywords,
      ** but z[i] is a character not allowed within keywords, so this must
      ** be an identifier instead */
      i++;
      while( IdChar(z[i]) ){ i++; }
      *tokenType = TK_ID;
      return i;
    }
    *tokenType = TK_ID;
    n = keywordCode((char*)z, i, tokenType);
    /* If the token is no longer considered to be an identifier, then it is a
    ** keyword of some kind.  Make the token back into an identifier and then
    ** set the SQLITE_TOKEN_KEYWORD flag.  Several non-identifier tokens are
    ** used verbatim, including IN, IS, NOT, and NULL. */
    switch( *tokenType ){
      case TK_ID: {
        /* do nothing, handled by caller */
        break;
      }
      case TK_IN:
      case TK_IS:
      case TK_NOT:
      case TK_NULL: {
        *flags |= SQLITE_TOKEN_KEYWORD;
        break;
      }
      default: {
        *tokenType = TK_ID;
        *flags |= SQLITE_TOKEN_KEYWORD;
        break;
      }
    }
  }else{
    n = sqlite3GetToken(z, tokenType);
    /* If the token is considered to be an identifier and the character class
    ** of the first character is a quote, set the SQLITE_TOKEN_QUOTED flag. */
    if( *tokenType==TK_ID && (iClass==CC_QUOTE || iClass==CC_QUOTE2) ){
      *flags |= SQLITE_TOKEN_QUOTED;
    }
  }
  return n;
}
#endif /* SQLITE_ENABLE_NORMALIZE */

/*
** Run the parser on the given SQL string.  The parser structure is
** passed in.  An SQLITE_ status code is returned.  If an error occurs
** then an and attempt is made to write an error message into 
** memory obtained from sqlite3_malloc() and to make *pzErrMsg point to that
** error message.
*/
................................................................................
        { SQLITE_DBCONFIG_ENABLE_TRIGGER,        SQLITE_EnableTrigger  },
        { SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER, SQLITE_Fts3Tokenizer  },
        { SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION, SQLITE_LoadExtension  },
        { SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE,      SQLITE_NoCkptOnClose  },
        { SQLITE_DBCONFIG_ENABLE_QPSG,           SQLITE_EnableQPSG     },
        { SQLITE_DBCONFIG_TRIGGER_EQP,           SQLITE_TriggerEQP     },
        { SQLITE_DBCONFIG_RESET_DATABASE,        SQLITE_ResetDatabase  },
        { SQLITE_DBCONFIG_DEFENSIVE,             SQLITE_Defensive      },
      };
      unsigned int i;
      rc = SQLITE_ERROR; /* IMP: R-42790-23372 */
      for(i=0; i<ArraySize(aFlagOp); i++){
        if( aFlagOp[i].op==op ){
          int onoff = va_arg(ap, int);
          int *pRes = va_arg(ap, int*);
................................................................................
    }
  }
  sqlite3_mutex_enter(db->mutex);
  db->errMask = 0xff;
  db->nDb = 2;
  db->magic = SQLITE_MAGIC_BUSY;
  db->aDb = db->aDbStatic;
  db->lookaside.bDisable = 1;

  assert( sizeof(db->aLimit)==sizeof(aHardLimit) );
  memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit));
  db->aLimit[SQLITE_LIMIT_WORKER_THREADS] = SQLITE_DEFAULT_WORKER_THREADS;
  db->autoCommit = 1;
  db->nextAutovac = -1;
  db->szMmap = sqlite3GlobalConfig.szMmap;
................................................................................
#endif
#if defined(SQLITE_ENABLE_FTS3_TOKENIZER)
                 | SQLITE_Fts3Tokenizer
#endif
#if defined(SQLITE_ENABLE_QPSG)
                 | SQLITE_EnableQPSG
#endif
#if defined(SQLITE_DEFAULT_DEFENSIVE)
                 | SQLITE_Defensive
#endif
      ;
  sqlite3HashInit(&db->aCollSeq);
#ifndef SQLITE_OMIT_VIRTUALTABLE
  sqlite3HashInit(&db->aModule);
#endif

  /* Add the default collation sequence BINARY. BINARY works for both UTF-8
................................................................................
      sqlite3 *db = va_arg(ap, sqlite3*);
      db->dbOptFlags = (u16)(va_arg(ap, int) & 0xffff);
      break;
    }

    /*   sqlite3_test_control(SQLITE_TESTCTRL_LOCALTIME_FAULT, int onoff);
    **
    ** If parameter onoff is non-zero, subsequent calls to localtime()
    ** and its variants fail. If onoff is zero, undo this setting.

    */
    case SQLITE_TESTCTRL_LOCALTIME_FAULT: {
      sqlite3GlobalConfig.bLocaltimeFault = va_arg(ap, int);
      break;
    }

    /*   sqlite3_test_control(SQLITE_TESTCTRL_INTERNAL_FUNCS, int onoff);
    **
    ** If parameter onoff is non-zero, internal-use-only SQL functions
    ** are visible to ordinary SQL.  This is useful for testing but is
    ** unsafe because invalid parameters to those internal-use-only functions
    ** can result in crashes or segfaults.
    */
    case SQLITE_TESTCTRL_INTERNAL_FUNCTIONS: {
      sqlite3GlobalConfig.bInternalFunctions = va_arg(ap, int);
      break;
    }

    /*   sqlite3_test_control(SQLITE_TESTCTRL_NEVER_CORRUPT, int);
    **
    ** Set or clear a flag that indicates that the database file is always well-
    ** formed and never corrupt.  This flag is clear by default, indicating that
    ** database files might have arbitrary corruption.  Setting the flag during
    ** testing causes certain assert() statements in the code to be activated
    ** that demonstrat invariants on well-formed database files.
................................................................................
  sqlite3_int64 *piFirst,         /* OUT: Selected child node */
  sqlite3_int64 *piLast           /* OUT: Selected child node */
){
  int rc = SQLITE_OK;             /* Return code */
  const char *zCsr = zNode;       /* Cursor to iterate through node */
  const char *zEnd = &zCsr[nNode];/* End of interior node buffer */
  char *zBuffer = 0;              /* Buffer to load terms into */
  i64 nAlloc = 0;                 /* Size of allocated buffer */
  int isFirstTerm = 1;            /* True when processing first term on page */
  sqlite3_int64 iChild;           /* Block id of child node to descend to */

  /* Skip over the 'height' varint that occurs at the start of every 
  ** interior node. Then load the blockid of the left-child of the b-tree
  ** node into variable iChild.  
  **
................................................................................
    if( !isFirstTerm ){
      zCsr += fts3GetVarint32(zCsr, &nPrefix);
    }
    isFirstTerm = 0;
    zCsr += fts3GetVarint32(zCsr, &nSuffix);
    
    assert( nPrefix>=0 && nSuffix>=0 );
    if( nPrefix>zCsr-zNode || nSuffix>zEnd-zCsr ){
      rc = FTS_CORRUPT_VTAB;
      goto finish_scan;
    }
    if( (i64)nPrefix+nSuffix>nAlloc ){
      char *zNew;
      nAlloc = ((i64)nPrefix+nSuffix) * 2;
      zNew = (char *)sqlite3_realloc64(zBuffer, nAlloc);
      if( !zNew ){
        rc = SQLITE_NOMEM;
        goto finish_scan;
      }
      zBuffer = zNew;
    }
    assert( zBuffer );
................................................................................
  assert( p->inTransaction );
  assert( p->mxSavepoint >= iSavepoint );
  TESTONLY( p->mxSavepoint = iSavepoint );
  sqlite3Fts3PendingTermsClear(p);
  return SQLITE_OK;
}

/*
** Return true if zName is the extension on one of the shadow tables used
** by this module.
*/
static int fts3ShadowName(const char *zName){
  static const char *azName[] = {
    "content", "docsize", "segdir", "segments", "stat", 
  };
  unsigned int i;
  for(i=0; i<sizeof(azName)/sizeof(azName[0]); i++){
    if( sqlite3_stricmp(zName, azName[i])==0 ) return 1;
  }
  return 0;
}

static const sqlite3_module fts3Module = {
  /* iVersion      */ 3,
  /* xCreate       */ fts3CreateMethod,
  /* xConnect      */ fts3ConnectMethod,
  /* xBestIndex    */ fts3BestIndexMethod,
  /* xDisconnect   */ fts3DisconnectMethod,
  /* xDestroy      */ fts3DestroyMethod,
  /* xOpen         */ fts3OpenMethod,
  /* xClose        */ fts3CloseMethod,
................................................................................
  /* xCommit       */ fts3CommitMethod,
  /* xRollback     */ fts3RollbackMethod,
  /* xFindFunction */ fts3FindFunctionMethod,
  /* xRename */       fts3RenameMethod,
  /* xSavepoint    */ fts3SavepointMethod,
  /* xRelease      */ fts3ReleaseMethod,
  /* xRollbackTo   */ fts3RollbackToMethod,
  /* xShadowName   */ fts3ShadowName,
};

/*
** This function is registered as the module destructor (called when an
** FTS3 enabled database connection is closed). It frees the memory
** allocated for the tokenizer hash table.
*/
................................................................................
    }
    assert( pToken->pSegcsr==0 );
  }

  return rc;
}

#ifndef SQLITE_DISABLE_FTS4_DEFERRED
/*
** This function is called on each phrase after the position lists for
** any deferred tokens have been loaded into memory. It updates the phrases
** current position list to include only those positions that are really
** instances of the phrase (after considering deferred tokens). If this
** means that the phrase does not appear in the current row, doclist.pList
** and doclist.nList are both zeroed.
................................................................................
      }
      sqlite3_free(aPoslist);
    }
  }

  return SQLITE_OK;
}
#endif /* SQLITE_DISABLE_FTS4_DEFERRED */

/*
** Maximum number of tokens a phrase may have to be considered for the
** incremental doclists strategy.
*/
#define MAX_INCR_PHRASE_TOKENS 4

................................................................................
     0,                           /* xSync         */
     0,                           /* xCommit       */
     0,                           /* xRollback     */
     0,                           /* xFindFunction */
     0,                           /* xRename       */
     0,                           /* xSavepoint    */
     0,                           /* xRelease      */
     0,                           /* xRollbackTo   */
     0                            /* xShadowName   */
  };
  int rc;                         /* Return code */

  rc = sqlite3_create_module(db, "fts4aux", &fts3aux_module, 0);
  return rc;
}

................................................................................
     0,                           /* xSync         */
     0,                           /* xCommit       */
     0,                           /* xRollback     */
     0,                           /* xFindFunction */
     0,                           /* xRename       */
     0,                           /* xSavepoint    */
     0,                           /* xRelease      */
     0,                           /* xRollbackTo   */
     0                            /* xShadowName   */
  };
  int rc;                         /* Return code */

  rc = sqlite3_create_module(db, "fts3tokenize", &fts3tok_module, (void*)pHash);
  return rc;
}

................................................................................
  rc = fts3SegReaderRequire(pReader, pNext, FTS3_VARINT_MAX*2);
  if( rc!=SQLITE_OK ) return rc;
  
  /* Because of the FTS3_NODE_PADDING bytes of padding, the following is 
  ** safe (no risk of overread) even if the node data is corrupted. */
  pNext += fts3GetVarint32(pNext, &nPrefix);
  pNext += fts3GetVarint32(pNext, &nSuffix);
  if( nSuffix<=0 
   || (&pReader->aNode[pReader->nNode] - pNext)<nSuffix
   || nPrefix>pReader->nTermAlloc
  ){
    return FTS_CORRUPT_VTAB;
  }

  /* Both nPrefix and nSuffix were read by fts3GetVarint32() and so are
  ** between 0 and 0x7FFFFFFF. But the sum of the two may cause integer
  ** overflow - hence the (i64) casts.  */
  if( (i64)nPrefix+nSuffix>(i64)pReader->nTermAlloc ){
    i64 nNew = ((i64)nPrefix+nSuffix)*2;
    char *zNew = sqlite3_realloc64(pReader->zTerm, nNew);
    if( !zNew ){
      return SQLITE_NOMEM;
    }
    pReader->zTerm = zNew;
    pReader->nTermAlloc = nNew;
  }

................................................................................
  pReader->aDoclist = pNext;
  pReader->pOffsetList = 0;

  /* Check that the doclist does not appear to extend past the end of the
  ** b-tree node. And that the final byte of the doclist is 0x00. If either 
  ** of these statements is untrue, then the data structure is corrupt.
  */
  if( (&pReader->aNode[pReader->nNode] - pReader->aDoclist)<pReader->nDoclist
   || (pReader->nPopulate==0 && pReader->aDoclist[pReader->nDoclist-1])
  ){
    return FTS_CORRUPT_VTAB;
  }
  return SQLITE_OK;
}

................................................................................
    p->aNode = 0;
  }else{
    if( bFirst==0 ){
      p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &nPrefix);
    }
    p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &nSuffix);

    if( nPrefix>p->iOff || nSuffix>p->nNode-p->iOff ){
      return SQLITE_CORRUPT_VTAB;
    }
    blobGrowBuffer(&p->term, nPrefix+nSuffix, &rc);
    if( rc==SQLITE_OK ){
      memcpy(&p->term.a[nPrefix], &p->aNode[p->iOff], nSuffix);
      p->term.n = nPrefix+nSuffix;
      p->iOff += nSuffix;
      if( p->iChild==0 ){
        p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &p->nDoclist);
        if( (p->nNode-p->iOff)<p->nDoclist ){
          return SQLITE_CORRUPT_VTAB;
        }
        p->aDoclist = &p->aNode[p->iOff];
        p->iOff += p->nDoclist;
      }
    }
  }

  assert( p->iOff<=p->nNode );

  return rc;
}

/*
** Release all dynamic resources held by node-reader object *p.
*/
static void nodeReaderRelease(NodeReader *p){
................................................................................
#define JEACH_VALUE   1
#define JEACH_TYPE    2
#define JEACH_ATOM    3
#define JEACH_ID      4
#define JEACH_PARENT  5
#define JEACH_FULLKEY 6
#define JEACH_PATH    7
/* The xBestIndex method assumes that the JSON and ROOT columns are
** the last two columns in the table.  Should this ever changes, be
** sure to update the xBestIndex method. */
#define JEACH_JSON    8
#define JEACH_ROOT    9

  UNUSED_PARAM(pzErr);
  UNUSED_PARAM(argv);
  UNUSED_PARAM(argc);
  UNUSED_PARAM(pAux);
................................................................................
** 1 if the constraint is found, 3 if the constraint and zRoot are found,
** and 0 otherwise.
*/
static int jsonEachBestIndex(
  sqlite3_vtab *tab,
  sqlite3_index_info *pIdxInfo
){
  int i;                     /* Loop counter or computed array index */
  int aIdx[2];               /* Index of constraints for JSON and ROOT */
  int unusableMask = 0;      /* Mask of unusable JSON and ROOT constraints */
  int idxMask = 0;           /* Mask of usable == constraints JSON and ROOT */
  const struct sqlite3_index_constraint *pConstraint;

  /* This implementation assumes that JSON and ROOT are the last two
  ** columns in the table */
  assert( JEACH_ROOT == JEACH_JSON+1 );
  UNUSED_PARAM(tab);
  aIdx[0] = aIdx[1] = -1;
  pConstraint = pIdxInfo->aConstraint;
  for(i=0; i<pIdxInfo->nConstraint; i++, pConstraint++){
    int iCol;
    int iMask;
    if( pConstraint->iColumn < JEACH_JSON ) continue;
    iCol = pConstraint->iColumn - JEACH_JSON;
    assert( iCol==0 || iCol==1 );
    iMask = 1 << iCol;
    if( pConstraint->usable==0 ){
      unusableMask |= iMask;
    }else if( pConstraint->op==SQLITE_INDEX_CONSTRAINT_EQ ){
      aIdx[iCol] = i;
      idxMask |= iMask;




    }
  }
  if( (unusableMask & ~idxMask)!=0 ){
    /* If there are any unusable constraints on JSON or ROOT, then reject
    ** this entire plan */
    return SQLITE_CONSTRAINT;
  }
  if( aIdx[0]<0 ){
    /* No JSON input.  Leave estimatedCost at the huge value that it was
    ** initialized to to discourage the query planner from selecting this
    ** plan. */

    pIdxInfo->idxNum = 0;

  }else{
    pIdxInfo->estimatedCost = 1.0;
    i = aIdx[0];
    pIdxInfo->aConstraintUsage[i].argvIndex = 1;
    pIdxInfo->aConstraintUsage[i].omit = 1;
    if( aIdx[1]<0 ){

      pIdxInfo->idxNum = 1;  /* Only JSON supplied.  Plan 1 */
    }else{
      i = aIdx[1];
      pIdxInfo->aConstraintUsage[i].argvIndex = 2;
      pIdxInfo->aConstraintUsage[i].omit = 1;
      pIdxInfo->idxNum = 3;  /* Both JSON and ROOT are supplied.  Plan 3 */
    }
  }
  return SQLITE_OK;
}

/* Start a search on a new JSON string */
static int jsonEachFilter(
................................................................................
  0,                         /* xSync */
  0,                         /* xCommit */
  0,                         /* xRollback */
  0,                         /* xFindMethod */
  0,                         /* xRename */
  0,                         /* xSavepoint */
  0,                         /* xRelease */
  0,                         /* xRollbackTo */
  0                          /* xShadowName */
};

/* The methods of the json_tree virtual table. */
static sqlite3_module jsonTreeModule = {
  0,                         /* iVersion */
  0,                         /* xCreate */
  jsonEachConnect,           /* xConnect */
................................................................................
  0,                         /* xSync */
  0,                         /* xCommit */
  0,                         /* xRollback */
  0,                         /* xFindMethod */
  0,                         /* xRename */
  0,                         /* xSavepoint */
  0,                         /* xRelease */
  0,                         /* xRollbackTo */
  0                          /* xShadowName */
};
#endif /* SQLITE_OMIT_VIRTUALTABLE */

/****************************************************************************
** The following routines are the only publically visible identifiers in this
** file.  Call the following routines in order to register the various SQL
** functions and the virtual table implemented by this file.
................................................................................
    }
    sqlite3_free(zSql);
  }

  return rc;
}


/*
** Return true if zName is the extension on one of the shadow tables used
** by this module.
*/
static int rtreeShadowName(const char *zName){
  static const char *azName[] = {
    "node", "parent", "rowid"
  };
  unsigned int i;
  for(i=0; i<sizeof(azName)/sizeof(azName[0]); i++){
    if( sqlite3_stricmp(zName, azName[i])==0 ) return 1;
  }
  return 0;
}

static sqlite3_module rtreeModule = {
  3,                          /* iVersion */
  rtreeCreate,                /* xCreate - create a table */
  rtreeConnect,               /* xConnect - connect to an existing table */
  rtreeBestIndex,             /* xBestIndex - Determine search strategy */
  rtreeDisconnect,            /* xDisconnect - Disconnect from a table */
  rtreeDestroy,               /* xDestroy - Drop a table */
  rtreeOpen,                  /* xOpen - open a cursor */
  rtreeClose,                 /* xClose - close a cursor */
................................................................................
  rtreeEndTransaction,        /* xCommit - commit transaction */
  rtreeEndTransaction,        /* xRollback - rollback transaction */
  0,                          /* xFindFunction - function overloading */
  rtreeRename,                /* xRename - rename the table */
  rtreeSavepoint,             /* xSavepoint */
  0,                          /* xRelease */
  0,                          /* xRollbackTo */
  rtreeShadowName             /* xShadowName */
};

static int rtreeSqlInit(
  Rtree *pRtree, 
  sqlite3 *db, 
  const char *zDb, 
  const char *zPrefix, 
................................................................................
** each segment is "outside" and the area to the left is "inside".
**
** The on-disk representation consists of a 4-byte header followed by
** the values.  The 4-byte header is:
**
**      encoding    (1 byte)   0=big-endian, 1=little-endian
**      nvertex     (3 bytes)  Number of vertexes as a big-endian integer
**
** Enough space is allocated for 4 coordinates, to work around over-zealous
** warnings coming from some compiler (notably, clang). In reality, the size
** of each GeoPoly memory allocate is adjusted as necessary so that the
** GeoPoly.a[] array at the end is the appropriate size.
*/
typedef struct GeoPoly GeoPoly;
struct GeoPoly {
  int nVertex;          /* Number of vertexes */
  unsigned char hdr[4]; /* Header for on-disk representation */
  GeoCoord a[8];        /* 2*nVertex values. X (longitude) first, then Y */
};

/* The size of a memory allocation needed for a GeoPoly object sufficient
** to hold N coordinate pairs.
*/
#define GEOPOLY_SZ(N)  (sizeof(GeoPoly) + sizeof(GeoCoord)*2*((N)-4))

/*
** State of a parse of a GeoJSON input.
*/
typedef struct GeoParse GeoParse;
struct GeoParse {
  const unsigned char *z;   /* Unparsed input */
  int nVertex;              /* Number of vertexes in a[] */
................................................................................
  t = a[1];
  a[1] = a[2];
  a[2] = t;
}

/* Skip whitespace.  Return the next non-whitespace character. */
static char geopolySkipSpace(GeoParse *p){
  while( safe_isspace(p->z[0]) ) p->z++;
  return p->z[0];
}

/* Parse out a number.  Write the value into *pVal if pVal!=0.
** return non-zero on success and zero if the next token is not a number.
*/
static int geopolyParseNumber(GeoParse *p, GeoCoord *pVal){
................................................................................
  if( c=='-' ){
    j = 1;
    c = z[j];
  }
  if( c=='0' && z[j+1]>='0' && z[j+1]<='9' ) return 0;
  for(;; j++){
    c = z[j];
    if( safe_isdigit(c) ) continue;
    if( c=='.' ){
      if( z[j-1]=='-' ) return 0;
      if( seenDP ) return 0;
      seenDP = 1;
      continue;
    }
    if( c=='e' || c=='E' ){
................................................................................
      }
      if( c<'0' || c>'9' ) return 0;
      continue;
    }
    break;
  }
  if( z[j-1]<'0' ) return 0;
  if( pVal ){
#ifdef SQLITE_AMALGAMATION
     /* The sqlite3AtoF() routine is much much faster than atof(), if it
     ** is available */
     double r;
     (void)sqlite3AtoF((const char*)p->z, &r, j, SQLITE_UTF8);
     *pVal = r;
#else
     *pVal = (GeoCoord)atof((const char*)p->z);
#endif
  }
  p->z += j;
  return 1;
}

/*
** If the input is a well-formed JSON array of coordinates with at least
** four coordinates and where each coordinate is itself a two-value array,
................................................................................
    }
    if( geopolySkipSpace(&s)==']'
     && s.nVertex>=4
     && s.a[0]==s.a[s.nVertex*2-2]
     && s.a[1]==s.a[s.nVertex*2-1]
     && (s.z++, geopolySkipSpace(&s)==0)
    ){

      GeoPoly *pOut;
      int x = 1;
      s.nVertex--;  /* Remove the redundant vertex at the end */

      pOut = sqlite3_malloc64( GEOPOLY_SZ(s.nVertex) );
      x = 1;
      if( pOut==0 ) goto parse_json_err;
      pOut->nVertex = s.nVertex;
      memcpy(pOut->a, s.a, s.nVertex*2*sizeof(GeoCoord));
      pOut->hdr[0] = *(unsigned char*)&x;
      pOut->hdr[1] = (s.nVertex>>16)&0xff;
      pOut->hdr[2] = (s.nVertex>>8)&0xff;
................................................................................
    }
    sqlite3_result_blob(context, p->hdr, 
       4+8*p->nVertex, SQLITE_TRANSIENT);
    sqlite3_free(p);
  }
}

/*
** Compute the area enclosed by the polygon.
**
** This routine can also be used to detect polygons that rotate in
** the wrong direction.  Polygons are suppose to be counter-clockwise (CCW).
** This routine returns a negative value for clockwise (CW) polygons.
*/
static double geopolyArea(GeoPoly *p){
  double rArea = 0.0;
  int ii;
  for(ii=0; ii<p->nVertex-1; ii++){
    rArea += (p->a[ii*2] - p->a[ii*2+2])           /* (x0 - x1) */
              * (p->a[ii*2+1] + p->a[ii*2+3])      /* (y0 + y1) */
              * 0.5;
  }
  rArea += (p->a[ii*2] - p->a[0])                  /* (xN - x0) */
           * (p->a[ii*2+1] + p->a[1])              /* (yN + y0) */
           * 0.5;
  return rArea;
}

/*
** Implementation of the geopoly_area(X) function.
**
** If the input is a well-formed Geopoly BLOB then return the area
** enclosed by the polygon.  If the polygon circulates clockwise instead
** of counterclockwise (as it should) then return the negative of the
** enclosed area.  Otherwise return NULL.
................................................................................
static void geopolyAreaFunc(
  sqlite3_context *context,
  int argc,
  sqlite3_value **argv
){
  GeoPoly *p = geopolyFuncParam(context, argv[0], 0);
  if( p ){
    sqlite3_result_double(context, geopolyArea(p));
    sqlite3_free(p);
  }            
}

/*
** Implementation of the geopoly_ccw(X) function.
**
** If the rotation of polygon X is clockwise (incorrect) instead of
** counter-clockwise (the correct winding order according to RFC7946)
** then reverse the order of the vertexes in polygon X.  
**
** In other words, this routine returns a CCW polygon regardless of the
** winding order of its input.
**
** Use this routine to sanitize historical inputs that that sometimes
** contain polygons that wind in the wrong direction.
*/
static void geopolyCcwFunc(
  sqlite3_context *context,
  int argc,
  sqlite3_value **argv
){
  GeoPoly *p = geopolyFuncParam(context, argv[0], 0);
  if( p ){
    if( geopolyArea(p)<0.0 ){
      int ii, jj;
      for(ii=2, jj=p->nVertex*2 - 2; ii<jj; ii+=2, jj-=2){
        GeoCoord t = p->a[ii];
        p->a[ii] = p->a[jj];
        p->a[jj] = t;
        t = p->a[ii+1];
        p->a[ii+1] = p->a[jj+1];
        p->a[jj+1] = t;




      }
    }



    sqlite3_result_blob(context, p->hdr, 
       4+8*p->nVertex, SQLITE_TRANSIENT);
    sqlite3_free(p);
  }            
}

#define GEOPOLY_PI 3.1415926535897932385

/* Fast approximation for sine(X) for X between -0.5*pi and 2*pi
*/
static double geopolySine(double r){
  assert( r>=-0.5*GEOPOLY_PI && r<=2.0*GEOPOLY_PI );
  if( r>=1.5*GEOPOLY_PI ){
    r -= 2.0*GEOPOLY_PI;
  }
  if( r>=0.5*GEOPOLY_PI ){
    return -geopolySine(r-GEOPOLY_PI);
  }else{
    double r2 = r*r;
    double r3 = r2*r;
    double r5 = r3*r2;
    return 0.9996949*r - 0.1656700*r3 + 0.0075134*r5;
  }
}

/*
** Function:   geopoly_regular(X,Y,R,N)
**
** Construct a simple, convex, regular polygon centered at X, Y
** with circumradius R and with N sides.
*/
static void geopolyRegularFunc(
  sqlite3_context *context,
  int argc,
  sqlite3_value **argv
){
  double x = sqlite3_value_double(argv[0]);
  double y = sqlite3_value_double(argv[1]);
  double r = sqlite3_value_double(argv[2]);
  int n = sqlite3_value_int(argv[3]);
  int i;
  GeoPoly *p;

  if( n<3 || r<=0.0 ) return;
  if( n>1000 ) n = 1000;
  p = sqlite3_malloc64( sizeof(*p) + (n-1)*2*sizeof(GeoCoord) );
  if( p==0 ){
    sqlite3_result_error_nomem(context);
    return;
  }
  i = 1;
  p->hdr[0] = *(unsigned char*)&i;
  p->hdr[1] = 0;
  p->hdr[2] = (n>>8)&0xff;
  p->hdr[3] = n&0xff;
  for(i=0; i<n; i++){
    double rAngle = 2.0*GEOPOLY_PI*i/n;
    p->a[i*2] = x - r*geopolySine(rAngle-0.5*GEOPOLY_PI);
    p->a[i*2+1] = y + r*geopolySine(rAngle);
  }
  sqlite3_result_blob(context, p->hdr, 4+8*n, SQLITE_TRANSIENT);
  sqlite3_free(p);
}

/*
** If pPoly is a polygon, compute its bounding box. Then:
**
**    (1) if aCoord!=0 store the bounding box in aCoord, returning NULL
**    (2) otherwise, compute a GeoPoly for the bounding box and return the
................................................................................
      r = p->a[ii*2+1];
      if( r<mnY ) mnY = (float)r;
      else if( r>mxY ) mxY = (float)r;
    }
    if( pRc ) *pRc = SQLITE_OK;
    if( aCoord==0 ){
      geopolyBboxFill:
      pOut = sqlite3_realloc(p, GEOPOLY_SZ(4));
      if( pOut==0 ){
        sqlite3_free(p);
        if( context ) sqlite3_result_error_nomem(context);
        if( pRc ) *pRc = SQLITE_NOMEM;
        return 0;
      }
      pOut->nVertex = 4;
................................................................................
    int jj;
    int nChange = 0;
    sqlite3_bind_int64(pUp, 1, cell.iRowid);
    assert( pRtree->nAux>=1 );
    if( sqlite3_value_nochange(aData[2]) ){
      sqlite3_bind_null(pUp, 2);
    }else{
      GeoPoly *p = 0;
      if( sqlite3_value_type(aData[2])==SQLITE_TEXT
       && (p = geopolyFuncParam(0, aData[2], &rc))!=0
       && rc==SQLITE_OK
      ){
        sqlite3_bind_blob(pUp, 2, p->hdr, 4+8*p->nVertex, SQLITE_TRANSIENT);
      }else{
        sqlite3_bind_value(pUp, 2, aData[2]);
      }
      sqlite3_free(p);
      nChange = 1;
    }
    for(jj=1; jj<pRtree->nAux; jj++){
      nChange++;
      sqlite3_bind_value(pUp, jj+2, aData[jj+2]);
    }
    if( nChange ){
................................................................................
    return SQLITE_INDEX_CONSTRAINT_FUNCTION+1;
  }
  return 0;
}


static sqlite3_module geopolyModule = {
  3,                          /* iVersion */
  geopolyCreate,              /* xCreate - create a table */
  geopolyConnect,             /* xConnect - connect to an existing table */
  geopolyBestIndex,           /* xBestIndex - Determine search strategy */
  rtreeDisconnect,            /* xDisconnect - Disconnect from a table */
  rtreeDestroy,               /* xDestroy - Drop a table */
  rtreeOpen,                  /* xOpen - open a cursor */
  rtreeClose,                 /* xClose - close a cursor */
................................................................................
  rtreeEndTransaction,        /* xCommit - commit transaction */
  rtreeEndTransaction,        /* xRollback - rollback transaction */
  geopolyFindFunction,        /* xFindFunction - function overloading */
  rtreeRename,                /* xRename - rename the table */
  rtreeSavepoint,             /* xSavepoint */
  0,                          /* xRelease */
  0,                          /* xRollbackTo */
  rtreeShadowName             /* xShadowName */
};

static int sqlite3_geopoly_init(sqlite3 *db){
  int rc = SQLITE_OK;
  static const struct {
    void (*xFunc)(sqlite3_context*,int,sqlite3_value**);
    signed char nArg;
    unsigned char bPure;
    const char *zName;
  } aFunc[] = {
     { geopolyAreaFunc,          1, 1,    "geopoly_area"             },
     { geopolyBlobFunc,          1, 1,    "geopoly_blob"             },
     { geopolyJsonFunc,          1, 1,    "geopoly_json"             },
     { geopolySvgFunc,          -1, 1,    "geopoly_svg"              },
     { geopolyWithinFunc,        2, 1,    "geopoly_within"           },
     { geopolyContainsPointFunc, 3, 1,    "geopoly_contains_point"   },
     { geopolyOverlapFunc,       2, 1,    "geopoly_overlap"          },
     { geopolyDebugFunc,         1, 0,    "geopoly_debug"            },
     { geopolyBBoxFunc,          1, 1,    "geopoly_bbox"             },
     { geopolyXformFunc,         7, 1,    "geopoly_xform"            },
     { geopolyRegularFunc,       4, 1,    "geopoly_regular"          },
     { geopolyCcwFunc,           1, 1,    "geopoly_ccw"              },
  };
  static const struct {
    void (*xStep)(sqlite3_context*,int,sqlite3_value**);
    void (*xFinal)(sqlite3_context*);
    const char *zName;
  } aAgg[] = {
     { geopolyBBoxStep, geopolyBBoxFinal, "geopoly_group_bbox"    },
  };
  int i;
  for(i=0; i<sizeof(aFunc)/sizeof(aFunc[0]) && rc==SQLITE_OK; i++){
    int enc = aFunc[i].bPure ? SQLITE_UTF8|SQLITE_DETERMINISTIC : SQLITE_UTF8;
    rc = sqlite3_create_function(db, aFunc[i].zName, aFunc[i].nArg,
                                 enc, 0,
                                 aFunc[i].xFunc, 0, 0);
  }
  for(i=0; i<sizeof(aAgg)/sizeof(aAgg[0]) && rc==SQLITE_OK; i++){
    rc = sqlite3_create_function(db, aAgg[i].zName, 1, SQLITE_UTF8, 0,
                                 0, aAgg[i].xStep, aAgg[i].xFinal);
  }
  if( rc==SQLITE_OK ){
................................................................................
** space used by the RBU handle.
*/
struct rbu_vfs {
  sqlite3_vfs base;               /* rbu VFS shim methods */
  sqlite3_vfs *pRealVfs;          /* Underlying VFS */
  sqlite3_mutex *mutex;           /* Mutex to protect pMain */
  sqlite3rbu *pRbu;               /* Owner RBU object */
  rbu_file *pMain;                /* List of main db files */
  rbu_file *pMainRbu;             /* List of main db files with pRbu!=0 */
};

/*
** Each file opened by an rbu VFS is represented by an instance of
** the following structure.
**
** If this is a temporary file (pRbu!=0 && flags&DELETE_ON_CLOSE), variable
................................................................................
  int nShm;                       /* Number of entries in apShm[] array */
  char **apShm;                   /* Array of mmap'd *-shm regions */
  char *zDel;                     /* Delete this when closing file */

  const char *zWal;               /* Wal filename for this main db file */
  rbu_file *pWalFd;               /* Wal file descriptor for this main db */
  rbu_file *pMainNext;            /* Next MAIN_DB file */
  rbu_file *pMainRbuNext;         /* Next MAIN_DB file with pRbu!=0 */
};

/*
** True for an RBU vacuum handle, or false otherwise.
*/
#define rbuIsVacuum(p) ((p)->zTarget==0)

................................................................................
  pRbu->szTemp += nDiff;
  pFd->sz = nNew;
  assert( pRbu->szTemp>=0 );
  if( pRbu->szTempLimit && pRbu->szTemp>pRbu->szTempLimit ) return SQLITE_FULL;
  return SQLITE_OK;
}

/*
** Add an item to the main-db lists, if it is not already present.
**
** There are two main-db lists. One for all file descriptors, and one
** for all file descriptors with rbu_file.pDb!=0. If the argument has
** rbu_file.pDb!=0, then it is assumed to already be present on the
** main list and is only added to the pDb!=0 list.
*/
static void rbuMainlistAdd(rbu_file *p){
  rbu_vfs *pRbuVfs = p->pRbuVfs;
  rbu_file *pIter;
  assert( (p->openFlags & SQLITE_OPEN_MAIN_DB) );
  sqlite3_mutex_enter(pRbuVfs->mutex);
  if( p->pRbu==0 ){
    for(pIter=pRbuVfs->pMain; pIter; pIter=pIter->pMainNext);
    p->pMainNext = pRbuVfs->pMain;
    pRbuVfs->pMain = p;
  }else{
    for(pIter=pRbuVfs->pMainRbu; pIter && pIter!=p; pIter=pIter->pMainRbuNext){}
    if( pIter==0 ){
      p->pMainRbuNext = pRbuVfs->pMainRbu;
      pRbuVfs->pMainRbu = p;
    }
  }
  sqlite3_mutex_leave(pRbuVfs->mutex);
}

/*
** Remove an item from the main-db lists.
*/
static void rbuMainlistRemove(rbu_file *p){
  rbu_file **pp;
  sqlite3_mutex_enter(p->pRbuVfs->mutex);
  for(pp=&p->pRbuVfs->pMain; *pp && *pp!=p; pp=&((*pp)->pMainNext)){}
  if( *pp ) *pp = p->pMainNext;
  p->pMainNext = 0;
  for(pp=&p->pRbuVfs->pMainRbu; *pp && *pp!=p; pp=&((*pp)->pMainRbuNext)){}
  if( *pp ) *pp = p->pMainRbuNext;
  p->pMainRbuNext = 0;
  sqlite3_mutex_leave(p->pRbuVfs->mutex);
}

/*
** Given that zWal points to a buffer containing a wal file name passed to 
** either the xOpen() or xAccess() VFS method, search the main-db list for
** a file-handle opened by the same database connection on the corresponding
** database file.
**
** If parameter bRbu is true, only search for file-descriptors with
** rbu_file.pDb!=0.
*/
static rbu_file *rbuFindMaindb(rbu_vfs *pRbuVfs, const char *zWal, int bRbu){
  rbu_file *pDb;
  sqlite3_mutex_enter(pRbuVfs->mutex);
  if( bRbu ){
    for(pDb=pRbuVfs->pMainRbu; pDb && pDb->zWal!=zWal; pDb=pDb->pMainRbuNext){}
  }else{
    for(pDb=pRbuVfs->pMain; pDb && pDb->zWal!=zWal; pDb=pDb->pMainNext){}
  }
  sqlite3_mutex_leave(pRbuVfs->mutex);
  return pDb;
}

/*
** Close an rbu file.
*/
static int rbuVfsClose(sqlite3_file *pFile){
  rbu_file *p = (rbu_file*)pFile;
  int rc;
  int i;
................................................................................
    sqlite3_free(p->apShm[i]);
  }
  sqlite3_free(p->apShm);
  p->apShm = 0;
  sqlite3_free(p->zDel);

  if( p->openFlags & SQLITE_OPEN_MAIN_DB ){
    rbuMainlistRemove(p);




    rbuUnlockShm(p);
    p->pReal->pMethods->xShmUnmap(p->pReal, 0);
  }
  else if( (p->openFlags & SQLITE_OPEN_DELETEONCLOSE) && p->pRbu ){
    rbuUpdateTempSize(p, 0);
  }
  assert( p->pMainNext==0 && p->pRbuVfs->pMain!=p );

  /* Close the underlying file handle */
  rc = p->pReal->pMethods->xClose(p->pReal);
  return rc;
}


................................................................................
      rc = xControl(p->pReal, SQLITE_FCNTL_ZIPVFS, &dummy);
      if( rc==SQLITE_OK ){
        rc = SQLITE_ERROR;
        pRbu->zErrmsg = sqlite3_mprintf("rbu/zipvfs setup error");
      }else if( rc==SQLITE_NOTFOUND ){
        pRbu->pTargetFd = p;
        p->pRbu = pRbu;
        if( p->openFlags & SQLITE_OPEN_MAIN_DB ){
          rbuMainlistAdd(p);
        }
        if( p->pWalFd ) p->pWalFd->pRbu = pRbu;
        rc = SQLITE_OK;
      }
    }
    return rc;
  }
  else if( op==SQLITE_FCNTL_RBUCNT ){
................................................................................
  }else{
    /* Release the checkpointer and writer locks */
    rbuUnlockShm(p);
    rc = p->pReal->pMethods->xShmUnmap(p->pReal, delFlag);
  }
  return rc;
}















/* 
** A main database named zName has just been opened. The following 
** function returns a pointer to a buffer owned by SQLite that contains
** the name of the *-wal file this db connection will use. SQLite
** happens to pass a pointer to this buffer when using xAccess()
** or xOpen() to operate on the *-wal file.  
................................................................................
      ** (pFd->zWal) to point to a buffer owned by SQLite that contains
      ** the name of the *-wal file this db connection will use. SQLite
      ** happens to pass a pointer to this buffer when using xAccess()
      ** or xOpen() to operate on the *-wal file.  */
      pFd->zWal = rbuMainToWal(zName, flags);
    }
    else if( flags & SQLITE_OPEN_WAL ){
      rbu_file *pDb = rbuFindMaindb(pRbuVfs, zName, 0);
      if( pDb ){
        if( pDb->pRbu && pDb->pRbu->eStage==RBU_STAGE_OAL ){
          /* This call is to open a *-wal file. Intead, open the *-oal. This
          ** code ensures that the string passed to xOpen() is terminated by a
          ** pair of '\0' bytes in case the VFS attempts to extract a URI 
          ** parameter from it.  */
          const char *zBase = zName;
................................................................................
  }
  if( pFd->pReal->pMethods ){
    /* The xOpen() operation has succeeded. Set the sqlite3_file.pMethods
    ** pointer and, if the file is a main database file, link it into the
    ** mutex protected linked list of all such files.  */
    pFile->pMethods = &rbuvfs_io_methods;
    if( flags & SQLITE_OPEN_MAIN_DB ){
      rbuMainlistAdd(pFd);



    }
  }else{
    sqlite3_free(pFd->zDel);
  }

  return rc;
}
................................................................................
  **
  **   b) if the *-wal file does not exist, claim that it does anyway,
  **      causing SQLite to call xOpen() to open it. This call will also
  **      be intercepted (see the rbuVfsOpen() function) and the *-oal
  **      file opened instead.
  */
  if( rc==SQLITE_OK && flags==SQLITE_ACCESS_EXISTS ){
    rbu_file *pDb = rbuFindMaindb(pRbuVfs, zPath, 1);
    if( pDb && pDb->pRbu && pDb->pRbu->eStage==RBU_STAGE_OAL ){
      if( *pResOut ){
        rc = SQLITE_CANTOPEN;
      }else{
        sqlite3_int64 sz = 0;
        rc = rbuVfsFileSize(&pDb->base, &sz);
        *pResOut = (sz>0);
................................................................................
** scan.  However, a schema=? constraint should cause this table to
** operate on a different database schema, so check for it.
**
** idxNum is normally 0, but will be 1 if a schema=? constraint exists.
*/
static int statBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){
  int i;



  /* Look for a valid schema=? constraint.  If found, change the idxNum to
  ** 1 and request the value of that constraint be sent to xFilter.  And
  ** lower the cost estimate to encourage the constrained version to be
  ** used.
  */
  for(i=0; i<pIdxInfo->nConstraint; i++){
    if( pIdxInfo->aConstraint[i].iColumn!=10 ) continue;
    if( pIdxInfo->aConstraint[i].usable==0 ) return SQLITE_CONSTRAINT;
    if( pIdxInfo->aConstraint[i].op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue;

    pIdxInfo->idxNum = 1;
    pIdxInfo->estimatedCost = 1.0;
    pIdxInfo->aConstraintUsage[i].argvIndex = 1;
    pIdxInfo->aConstraintUsage[i].omit = 1;
    break;
  }

................................................................................
    pCsr->iDb = pTab->iDb;
  }

  *ppCursor = (sqlite3_vtab_cursor *)pCsr;
  return SQLITE_OK;
}

static void statClearCells(StatPage *p){
  int i;
  if( p->aCell ){
    for(i=0; i<p->nCell; i++){
      sqlite3_free(p->aCell[i].aOvfl);
    }
    sqlite3_free(p->aCell);
  }
  p->nCell = 0;
  p->aCell = 0;
}

static void statClearPage(StatPage *p){
  statClearCells(p);
  sqlite3PagerUnref(p->pPg);
  sqlite3_free(p->zPath);
  memset(p, 0, sizeof(StatPage));
}

static void statResetCsr(StatCursor *pCsr){
  int i;
................................................................................
  int isLeaf;
  int szPage;

  u8 *aData = sqlite3PagerGetData(p->pPg);
  u8 *aHdr = &aData[p->iPgno==1 ? 100 : 0];

  p->flags = aHdr[0];
  if( p->flags==0x0A || p->flags==0x0D ){
    isLeaf = 1;
    nHdr = 8;
  }else if( p->flags==0x05 || p->flags==0x02 ){
    isLeaf = 0;
    nHdr = 12;
  }else{
    goto statPageIsCorrupt;
  }
  if( p->iPgno==1 ) nHdr += 100;
  p->nCell = get2byte(&aHdr[3]);
  p->nMxPayload = 0;
  szPage = sqlite3BtreeGetPageSize(pBt);




  nUnused = get2byte(&aHdr[5]) - nHdr - 2*p->nCell;
  nUnused += (int)aHdr[7];
  iOff = get2byte(&aHdr[1]);
  while( iOff ){
    int iNext;
    if( iOff>=szPage ) goto statPageIsCorrupt;
    nUnused += get2byte(&aData[iOff+2]);
    iNext = get2byte(&aData[iOff]);
    if( iNext<iOff+4 && iNext>0 ) goto statPageIsCorrupt;
    iOff = iNext;
  }
  p->nUnused = nUnused;
  p->iRightChildPg = isLeaf ? 0 : sqlite3Get4byte(&aHdr[8]);


  if( p->nCell ){
    int i;                        /* Used to iterate through cells */
    int nUsable;                  /* Usable bytes per page */

    sqlite3BtreeEnter(pBt);
    nUsable = szPage - sqlite3BtreeGetReserveNoMutex(pBt);
................................................................................
    if( p->aCell==0 ) return SQLITE_NOMEM_BKPT;
    memset(p->aCell, 0, (p->nCell+1) * sizeof(StatCell));

    for(i=0; i<p->nCell; i++){
      StatCell *pCell = &p->aCell[i];

      iOff = get2byte(&aData[nHdr+i*2]);
      if( iOff<nHdr || iOff>=szPage ) goto statPageIsCorrupt;
      if( !isLeaf ){
        pCell->iChildPg = sqlite3Get4byte(&aData[iOff]);
        iOff += 4;
      }
      if( p->flags==0x05 ){
        /* A table interior node. nPayload==0. */
      }else{
................................................................................
        iOff += getVarint32(&aData[iOff], nPayload);
        if( p->flags==0x0D ){
          u64 dummy;
          iOff += sqlite3GetVarint(&aData[iOff], &dummy);
        }
        if( nPayload>(u32)p->nMxPayload ) p->nMxPayload = nPayload;
        getLocalPayload(nUsable, p->flags, nPayload, &nLocal);
        if( nLocal<0 ) goto statPageIsCorrupt;
        pCell->nLocal = nLocal;

        assert( nPayload>=(u32)nLocal );
        assert( nLocal<=(nUsable-35) );
        if( nPayload>(u32)nLocal ){
          int j;
          int nOvfl = ((nPayload - nLocal) + nUsable-4 - 1) / (nUsable - 4);
          if( iOff+nLocal>nUsable ) goto statPageIsCorrupt;
          pCell->nLastOvfl = (nPayload-nLocal) - (nOvfl-1) * (nUsable-4);
          pCell->nOvfl = nOvfl;
          pCell->aOvfl = sqlite3_malloc64(sizeof(u32)*nOvfl);
          if( pCell->aOvfl==0 ) return SQLITE_NOMEM_BKPT;
          pCell->aOvfl[0] = sqlite3Get4byte(&aData[iOff+nLocal]);
          for(j=1; j<nOvfl; j++){
            int rc;
................................................................................
          }
        }
      }
    }
  }

  return SQLITE_OK;

statPageIsCorrupt:
  p->flags = 0;
  statClearCells(p);
  return SQLITE_OK;
}

/*
** Populate the pCsr->iOffset and pCsr->szPage member variables. Based on
** the current value of pCsr->iPageno.
*/
static void statSizeAndOffset(StatCursor *pCsr){
................................................................................
    0,                            /* xCommit */
    0,                            /* xRollback */
    0,                            /* xFindMethod */
    0,                            /* xRename */
    0,                            /* xSavepoint */
    0,                            /* xRelease */
    0,                            /* xRollbackTo */
    0                             /* xShadowName */
  };
  return sqlite3_create_module(db, "dbstat", &dbstat_module, 0);
}
#elif defined(SQLITE_ENABLE_DBSTAT_VTAB)
SQLITE_PRIVATE int sqlite3DbstatRegister(sqlite3 *db){ return SQLITE_OK; }
#endif /* SQLITE_ENABLE_DBSTAT_VTAB */

................................................................................
  ** unavailable
  */
  for(i=0; i<pIdxInfo->nConstraint; i++){
    struct sqlite3_index_constraint *p = &pIdxInfo->aConstraint[i];
    if( p->iColumn!=DBPAGE_COLUMN_SCHEMA ) continue;
    if( p->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue;
    if( !p->usable ){
      /* No solution. */

      return SQLITE_CONSTRAINT;
    }
    iPlan = 2;
    pIdxInfo->aConstraintUsage[i].argvIndex = 1;
    pIdxInfo->aConstraintUsage[i].omit = 1;
    break;
  }

................................................................................
  char *zErr = 0;
  const char *zSchema;
  int iDb;
  Btree *pBt;
  Pager *pPager;
  int szPage;

  if( pTab->db->flags & SQLITE_Defensive ){
    zErr = "read-only";
    goto update_fail;
  }
  if( argc==1 ){
    zErr = "cannot delete";
    goto update_fail;
  }
  pgno = sqlite3_value_int(argv[0]);
  if( (Pgno)sqlite3_value_int(argv[1])!=pgno ){
    zErr = "cannot insert";
................................................................................
    0,                            /* xCommit */
    0,                            /* xRollback */
    0,                            /* xFindMethod */
    0,                            /* xRename */
    0,                            /* xSavepoint */
    0,                            /* xRelease */
    0,                            /* xRollbackTo */
    0                             /* xShadowName */
  };
  return sqlite3_create_module(db, "sqlite_dbpage", &dbpage_module, 0);
}
#elif defined(SQLITE_ENABLE_DBPAGE_VTAB)
SQLITE_PRIVATE int sqlite3DbpageRegister(sqlite3 *db){ return SQLITE_OK; }
#endif /* SQLITE_ENABLE_DBSTAT_VTAB */

................................................................................
# ifdef SQLITE_TEST
#   define SESSIONS_STRM_CHUNK_SIZE 64
# else
#   define SESSIONS_STRM_CHUNK_SIZE 1024
# endif
#endif

static int sessions_strm_chunk_size = SESSIONS_STRM_CHUNK_SIZE;

typedef struct SessionHook SessionHook;
struct SessionHook {
  void *pCtx;
  int (*xOld)(void*,int,sqlite3_value**);
  int (*xNew)(void*,int,sqlite3_value**);
  int (*xCount)(void*);
  int (*xDepth)(void*);
................................................................................
/*
** Structure for changeset iterators.
*/
struct sqlite3_changeset_iter {
  SessionInput in;                /* Input buffer or stream */
  SessionBuffer tblhdr;           /* Buffer to hold apValue/zTab/abPK/ */
  int bPatchset;                  /* True if this is a patchset */
  int bInvert;                    /* True to invert changeset */
  int rc;                         /* Iterator error code */
  sqlite3_stmt *pConflict;        /* Points to conflicting row, if any */
  char *zTab;                     /* Current table */
  int nCol;                       /* Number of columns in zTab */
  int op;                         /* Current operation */
  int bIndirect;                  /* True if current change was indirect */
  u8 *abPK;                       /* Primary key array */
................................................................................
** columns and columns that are modified by the UPDATE are set to "undefined".
** PRIMARY KEY fields contain the values identifying the table row to update,
** and fields associated with modified columns contain the new column values.
**
** The records associated with INSERT changes are in the same format as for
** changesets. It is not possible for a record associated with an INSERT
** change to contain a field set to "undefined".
**
** REBASE BLOB FORMAT:
**
** A rebase blob may be output by sqlite3changeset_apply_v2() and its 
** streaming equivalent for use with the sqlite3_rebaser APIs to rebase
** existing changesets. A rebase blob contains one entry for each conflict
** resolved using either the OMIT or REPLACE strategies within the apply_v2()
** call.
**
** The format used for a rebase blob is very similar to that used for
** changesets. All entries related to a single table are grouped together.
**
** Each group of entries begins with a table header in changeset format:
**
**   1 byte: Constant 0x54 (capital 'T')
**   Varint: Number of columns in the table.
**   nCol bytes: 0x01 for PK columns, 0x00 otherwise.
**   N bytes: Unqualified table name (encoded using UTF-8). Nul-terminated.
**
** Followed by one or more entries associated with the table.
**
**   1 byte: Either SQLITE_INSERT (0x12), DELETE (0x09).
**   1 byte: Flag. 0x01 for REPLACE, 0x00 for OMIT.
**   record: (in the record format defined above).
**
** In a rebase blob, the first field is set to SQLITE_INSERT if the change
** that caused the conflict was an INSERT or UPDATE, or to SQLITE_DELETE if
** it was a DELETE. The second field is set to 0x01 if the conflict 
** resolution strategy was REPLACE, or 0x00 if it was OMIT.
**
** If the change that caused the conflict was a DELETE, then the single
** record is a copy of the old.* record from the original changeset. If it
** was an INSERT, then the single record is a copy of the new.* record. If
** the conflicting change was an UPDATE, then the single record is a copy
** of the new.* record with the PK fields filled in based on the original
** old.* record.
*/

/*
** For each row modified during a session, there exists a single instance of
** this structure stored in a SessionTable.aChange[] hash table.
*/
struct SessionChange {
................................................................................
**
** If successful, return zero. Otherwise, if an OOM condition is encountered,
** set *pRc to SQLITE_NOMEM and return non-zero.
*/
static int sessionBufferGrow(SessionBuffer *p, int nByte, int *pRc){
  if( *pRc==SQLITE_OK && p->nAlloc-p->nBuf<nByte ){
    u8 *aNew;
    i64 nNew = p->nAlloc ? p->nAlloc : 128;
    do {
      nNew = nNew*2;
    }while( (nNew-p->nBuf)<nByte );

    aNew = (u8 *)sqlite3_realloc64(p->aBuf, nNew);
    if( 0==aNew ){
      *pRc = SQLITE_NOMEM;
    }else{
      p->aBuf = aNew;
      p->nAlloc = nNew;
    }
  }
................................................................................
          }else if( p->op!=SQLITE_INSERT ){
            rc = sessionAppendDelete(&buf, bPatchset, p, nCol, abPK);
          }
          if( rc==SQLITE_OK ){
            rc = sqlite3_reset(pSel);
          }

          /* If the buffer is now larger than sessions_strm_chunk_size, pass
          ** its contents to the xOutput() callback. */
          if( xOutput 
           && rc==SQLITE_OK 
           && buf.nBuf>nNoop 
           && buf.nBuf>sessions_strm_chunk_size 
          ){
            rc = xOutput(pOut, (void*)buf.aBuf, buf.nBuf);
            nNoop = -1;
            buf.nBuf = 0;
          }

        }
................................................................................
** Do the work for either sqlite3changeset_start() or start_strm().
*/
static int sessionChangesetStart(
  sqlite3_changeset_iter **pp,    /* OUT: Changeset iterator handle */
  int (*xInput)(void *pIn, void *pData, int *pnData),
  void *pIn,
  int nChangeset,                 /* Size of buffer pChangeset in bytes */
  void *pChangeset,               /* Pointer to buffer containing changeset */
  int bInvert                     /* True to invert changeset */
){
  sqlite3_changeset_iter *pRet;   /* Iterator to return */
  int nByte;                      /* Number of bytes to allocate for iterator */

  assert( xInput==0 || (pChangeset==0 && nChangeset==0) );

  /* Zero the output variable in case an error occurs. */
................................................................................
  if( !pRet ) return SQLITE_NOMEM;
  memset(pRet, 0, sizeof(sqlite3_changeset_iter));
  pRet->in.aData = (u8 *)pChangeset;
  pRet->in.nData = nChangeset;
  pRet->in.xInput = xInput;
  pRet->in.pIn = pIn;
  pRet->in.bEof = (xInput ? 0 : 1);
  pRet->bInvert = bInvert;

  /* Populate the output variable and return success. */
  *pp = pRet;
  return SQLITE_OK;
}

/*
................................................................................
** Create an iterator used to iterate through the contents of a changeset.
*/
SQLITE_API int sqlite3changeset_start(
  sqlite3_changeset_iter **pp,    /* OUT: Changeset iterator handle */
  int nChangeset,                 /* Size of buffer pChangeset in bytes */
  void *pChangeset                /* Pointer to buffer containing changeset */
){
  return sessionChangesetStart(pp, 0, 0, nChangeset, pChangeset, 0);
}
SQLITE_API int sqlite3changeset_start_v2(
  sqlite3_changeset_iter **pp,    /* OUT: Changeset iterator handle */
  int nChangeset,                 /* Size of buffer pChangeset in bytes */
  void *pChangeset,               /* Pointer to buffer containing changeset */
  int flags
){
  int bInvert = !!(flags & SQLITE_CHANGESETSTART_INVERT);
  return sessionChangesetStart(pp, 0, 0, nChangeset, pChangeset, bInvert);
}

/*
** Streaming version of sqlite3changeset_start().
*/
SQLITE_API int sqlite3changeset_start_strm(
  sqlite3_changeset_iter **pp,    /* OUT: Changeset iterator handle */
  int (*xInput)(void *pIn, void *pData, int *pnData),
  void *pIn
){
  return sessionChangesetStart(pp, xInput, pIn, 0, 0, 0);
}
SQLITE_API int sqlite3changeset_start_v2_strm(
  sqlite3_changeset_iter **pp,    /* OUT: Changeset iterator handle */
  int (*xInput)(void *pIn, void *pData, int *pnData),
  void *pIn,
  int flags
){
  int bInvert = !!(flags & SQLITE_CHANGESETSTART_INVERT);
  return sessionChangesetStart(pp, xInput, pIn, 0, 0, bInvert);
}

/*
** If the SessionInput object passed as the only argument is a streaming
** object and the buffer is full, discard some data to free up space.
*/
static void sessionDiscardData(SessionInput *pIn){
  if( pIn->xInput && pIn->iNext>=sessions_strm_chunk_size ){
    int nMove = pIn->buf.nBuf - pIn->iNext;
    assert( nMove>=0 );
    if( nMove>0 ){
      memmove(pIn->buf.aBuf, &pIn->buf.aBuf[pIn->iNext], nMove);
    }
    pIn->buf.nBuf -= pIn->iNext;
    pIn->iNext = 0;
................................................................................
**
** Return an SQLite error code if an error occurs, or SQLITE_OK otherwise.
*/
static int sessionInputBuffer(SessionInput *pIn, int nByte){
  int rc = SQLITE_OK;
  if( pIn->xInput ){
    while( !pIn->bEof && (pIn->iNext+nByte)>=pIn->nData && rc==SQLITE_OK ){
      int nNew = sessions_strm_chunk_size;

      if( pIn->bNoDiscard==0 ) sessionDiscardData(pIn);
      if( SQLITE_OK==sessionBufferGrow(&pIn->buf, nNew, &rc) ){
        rc = pIn->xInput(pIn->pIn, &pIn->buf.aBuf[pIn->buf.nBuf], &nNew);
        if( nNew==0 ){
          pIn->bEof = 1;
        }else{
................................................................................
    if( sessionChangesetReadTblhdr(p) ) return p->rc;
    if( (p->rc = sessionInputBuffer(&p->in, 2)) ) return p->rc;
    p->in.iCurrent = p->in.iNext;
    if( p->in.iNext>=p->in.nData ) return SQLITE_DONE;
    op = p->in.aData[p->in.iNext++];
  }

  if( p->zTab==0 || (p->bPatchset && p->bInvert) ){
    /* The first record in the changeset is not a table header. Must be a
    ** corrupt changeset. */
    assert( p->in.iNext==1 || p->zTab );
    return (p->rc = SQLITE_CORRUPT_BKPT);
  }

  p->op = op;
  p->bIndirect = p->in.aData[p->in.iNext++];
  if( p->op!=SQLITE_UPDATE && p->op!=SQLITE_DELETE && p->op!=SQLITE_INSERT ){
    return (p->rc = SQLITE_CORRUPT_BKPT);
................................................................................
      nVal = p->nCol;
    }
    p->rc = sessionChangesetBufferRecord(&p->in, nVal, pnRec);
    if( p->rc!=SQLITE_OK ) return p->rc;
    *paRec = &p->in.aData[p->in.iNext];
    p->in.iNext += *pnRec;
  }else{
    sqlite3_value **apOld = (p->bInvert ? &p->apValue[p->nCol] : p->apValue);
    sqlite3_value **apNew = (p->bInvert ? p->apValue : &p->apValue[p->nCol]);

    /* If this is an UPDATE or DELETE, read the old.* record. */
    if( p->op!=SQLITE_INSERT && (p->bPatchset==0 || p->op==SQLITE_DELETE) ){
      u8 *abPK = p->bPatchset ? p->abPK : 0;
      p->rc = sessionReadRecord(&p->in, p->nCol, abPK, apOld);
      if( p->rc!=SQLITE_OK ) return p->rc;
    }

    /* If this is an INSERT or UPDATE, read the new.* record. */
    if( p->op!=SQLITE_DELETE ){
      p->rc = sessionReadRecord(&p->in, p->nCol, 0, apNew);
      if( p->rc!=SQLITE_OK ) return p->rc;
    }

    if( (p->bPatchset || p->bInvert) && p->op==SQLITE_UPDATE ){
      /* If this is an UPDATE that is part of a patchset, then all PK and
      ** modified fields are present in the new.* record. The old.* record
      ** is currently completely empty. This block shifts the PK fields from
      ** new.* to old.*, to accommodate the code that reads these arrays.  */
      for(i=0; i<p->nCol; i++){
        assert( p->bPatchset==0 || p->apValue[i]==0 );
        if( p->abPK[i] ){
          assert( p->apValue[i]==0 );
          p->apValue[i] = p->apValue[i+p->nCol];
          if( p->apValue[i]==0 ) return (p->rc = SQLITE_CORRUPT_BKPT);
          p->apValue[i+p->nCol] = 0;
        }
      }
    }else if( p->bInvert ){
      if( p->op==SQLITE_INSERT ) p->op = SQLITE_DELETE;
      else if( p->op==SQLITE_DELETE ) p->op = SQLITE_INSERT;
    }
  }

  return SQLITE_ROW;
}

/*
................................................................................

      default:
        rc = SQLITE_CORRUPT_BKPT;
        goto finished_invert;
    }

    assert( rc==SQLITE_OK );
    if( xOutput && sOut.nBuf>=sessions_strm_chunk_size ){
      rc = xOutput(pOut, sOut.aBuf, sOut.nBuf);
      sOut.nBuf = 0;
      if( rc!=SQLITE_OK ) goto finished_invert;
    }
  }

  assert( rc==SQLITE_OK );
................................................................................
  int nCol;                       /* Size of azCol[] and abPK[] arrays */
  const char **azCol;             /* Array of column names */
  u8 *abPK;                       /* Boolean array - true if column is in PK */
  int bStat1;                     /* True if table is sqlite_stat1 */
  int bDeferConstraints;          /* True to defer constraints */
  SessionBuffer constraints;      /* Deferred constraints are stored here */
  SessionBuffer rebase;           /* Rebase information (if any) here */
  u8 bRebaseStarted;              /* If table header is already in rebase */
  u8 bRebase;                     /* True to collect rebase information */
};

/*
** Formulate a statement to DELETE a row from database db. Assuming a table
** structure like this:
**
**     CREATE TABLE x(a, b, c, d, PRIMARY KEY(a, c));
................................................................................
*/
static int sessionRebaseAdd(
  SessionApplyCtx *p,             /* Apply context */
  int eType,                      /* Conflict resolution (OMIT or REPLACE) */
  sqlite3_changeset_iter *pIter   /* Iterator pointing at current change */
){
  int rc = SQLITE_OK;
  if( p->bRebase ){
    int i;
    int eOp = pIter->op;
    if( p->bRebaseStarted==0 ){
      /* Append a table-header to the rebase buffer */
      const char *zTab = pIter->zTab;
      sessionAppendByte(&p->rebase, 'T', &rc);
      sessionAppendVarint(&p->rebase, p->nCol, &rc);
      sessionAppendBlob(&p->rebase, p->abPK, p->nCol, &rc);
      sessionAppendBlob(&p->rebase, (u8*)zTab, (int)strlen(zTab)+1, &rc);
      p->bRebaseStarted = 1;
    }

    assert( eType==SQLITE_CHANGESET_REPLACE||eType==SQLITE_CHANGESET_OMIT );
    assert( eOp==SQLITE_DELETE || eOp==SQLITE_INSERT || eOp==SQLITE_UPDATE );

    sessionAppendByte(&p->rebase, 
        (eOp==SQLITE_DELETE ? SQLITE_DELETE : SQLITE_INSERT), &rc
        );
    sessionAppendByte(&p->rebase, (eType==SQLITE_CHANGESET_REPLACE), &rc);
    for(i=0; i<p->nCol; i++){
      sqlite3_value *pVal = 0;
      if( eOp==SQLITE_DELETE || (eOp==SQLITE_UPDATE && p->abPK[i]) ){
        sqlite3changeset_old(pIter, i, &pVal);
      }else{
        sqlite3changeset_new(pIter, i, &pVal);
      }
      sessionAppendValue(&p->rebase, pVal, &rc);
    }
  }
  return rc;
}

/*
** Invoke the conflict handler for the change that the changeset iterator
** currently points to.
**
................................................................................
  int rc = SQLITE_OK;

  while( pApply->constraints.nBuf ){
    sqlite3_changeset_iter *pIter2 = 0;
    SessionBuffer cons = pApply->constraints;
    memset(&pApply->constraints, 0, sizeof(SessionBuffer));

    rc = sessionChangesetStart(&pIter2, 0, 0, cons.nBuf, cons.aBuf, 0);
    if( rc==SQLITE_OK ){
      int nByte = 2*pApply->nCol*sizeof(sqlite3_value*);
      int rc2;
      pIter2->bPatchset = bPatchset;
      pIter2->zTab = (char*)zTab;
      pIter2->nCol = pApply->nCol;
      pIter2->abPK = pApply->abPK;
................................................................................
  SessionApplyCtx sApply;         /* changeset_apply() context object */
  int bPatchset;

  assert( xConflict!=0 );

  pIter->in.bNoDiscard = 1;
  memset(&sApply, 0, sizeof(sApply));
  sApply.bRebase = (ppRebase && pnRebase);
  sqlite3_mutex_enter(sqlite3_db_mutex(db));
  if( (flags & SQLITE_CHANGESETAPPLY_NOSAVEPOINT)==0 ){
    rc = sqlite3_exec(db, "SAVEPOINT changeset_apply", 0, 0, 0);
  }
  if( rc==SQLITE_OK ){
    rc = sqlite3_exec(db, "PRAGMA defer_foreign_keys = 1", 0, 0, 0);
  }
................................................................................
      rc = sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0);
    }else{
      sqlite3_exec(db, "ROLLBACK TO changeset_apply", 0, 0, 0);
      sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0);
    }
  }

  assert( sApply.bRebase || sApply.rebase.nBuf==0 );
  if( rc==SQLITE_OK && bPatchset==0 && sApply.bRebase ){
    *ppRebase = (void*)sApply.rebase.aBuf;
    *pnRebase = sApply.rebase.nBuf;
    sApply.rebase.aBuf = 0;
  }
  sqlite3_finalize(sApply.pInsert);
  sqlite3_finalize(sApply.pDelete);
  sqlite3_finalize(sApply.pUpdate);
................................................................................
    sqlite3_changeset_iter *p     /* Handle describing change and conflict */
  ),
  void *pCtx,                     /* First argument passed to xConflict */
  void **ppRebase, int *pnRebase,
  int flags
){
  sqlite3_changeset_iter *pIter;  /* Iterator to skip through changeset */  
  int bInverse = !!(flags & SQLITE_CHANGESETAPPLY_INVERT);
  int rc = sessionChangesetStart(&pIter, 0, 0, nChangeset, pChangeset,bInverse);
  if( rc==SQLITE_OK ){
    rc = sessionChangesetApply(
        db, pIter, xFilter, xConflict, pCtx, ppRebase, pnRebase, flags
    );
  }
  return rc;
}
................................................................................
    sqlite3_changeset_iter *p     /* Handle describing change and conflict */
  ),
  void *pCtx,                     /* First argument passed to xConflict */
  void **ppRebase, int *pnRebase,
  int flags
){
  sqlite3_changeset_iter *pIter;  /* Iterator to skip through changeset */  
  int bInverse = !!(flags & SQLITE_CHANGESETAPPLY_INVERT);
  int rc = sessionChangesetStart(&pIter, xInput, pIn, 0, 0, bInverse);
  if( rc==SQLITE_OK ){
    rc = sessionChangesetApply(
        db, pIter, xFilter, xConflict, pCtx, ppRebase, pnRebase, flags
    );
  }
  return rc;
}
................................................................................
    sessionAppendTableHdr(&buf, pGrp->bPatch, pTab, &rc);
    for(i=0; i<pTab->nChange; i++){
      SessionChange *p;
      for(p=pTab->apChange[i]; p; p=p->pNext){
        sessionAppendByte(&buf, p->op, &rc);
        sessionAppendByte(&buf, p->bIndirect, &rc);
        sessionAppendBlob(&buf, p->aRecord, p->nRecord, &rc);



        if( rc==SQLITE_OK && xOutput && buf.nBuf>=sessions_strm_chunk_size ){
          rc = xOutput(pOut, buf.aBuf, buf.nBuf);
          buf.nBuf = 0;
        }
      }
    }
  }

  if( rc==SQLITE_OK ){
    if( xOutput ){
      if( buf.nBuf>0 ) rc = xOutput(pOut, buf.aBuf, buf.nBuf);
    }else{
      *ppOut = buf.aBuf;
................................................................................
    }

    if( bDone==0 ){
      sessionAppendByte(&sOut, pIter->op, &rc);
      sessionAppendByte(&sOut, pIter->bIndirect, &rc);
      sessionAppendBlob(&sOut, aRec, nRec, &rc);
    }
    if( rc==SQLITE_OK && xOutput && sOut.nBuf>sessions_strm_chunk_size ){
      rc = xOutput(pOut, sOut.aBuf, sOut.nBuf);
      sOut.nBuf = 0;
    }
    if( rc ) break;
  }

  if( rc!=SQLITE_OK ){
................................................................................
SQLITE_API void sqlite3rebaser_delete(sqlite3_rebaser *p){
  if( p ){
    sessionDeleteTable(p->grp.pList);
    sqlite3_free(p);
  }
}

/* 
** Global configuration
*/
SQLITE_API int sqlite3session_config(int op, void *pArg){
  int rc = SQLITE_OK;
  switch( op ){
    case SQLITE_SESSION_CONFIG_STRMSIZE: {
      int *pInt = (int*)pArg;
      if( *pInt>0 ){
        sessions_strm_chunk_size = *pInt;
      }
      *pInt = sessions_strm_chunk_size;
      break;
    }
    default:
      rc = SQLITE_MISUSE;
      break;
  }
  return rc;
}

#endif /* SQLITE_ENABLE_SESSION && SQLITE_ENABLE_PREUPDATE_HOOK */

/************** End of sqlite3session.c **************************************/
/************** Begin file fts5.c ********************************************/


#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS5) 
................................................................................
** of this template is copied straight through into the generate parser
** source file.
**
** The following is the concatenation of all %include directives from the
** input grammar file:
*/
/* #include <stdio.h> */
/* #include <assert.h> */
/************ Begin %include sections from the grammar ************************/

/* #include "fts5Int.h" */
/* #include "fts5parse.h" */

/*
** Disable all error recovery processing in the parser push-down
................................................................................
             fts5yyTracePrompt,fts5yyTokenName[fts5yymajor]);
        }
#endif
        fts5yy_destructor(fts5yypParser, (fts5YYCODETYPE)fts5yymajor, &fts5yyminorunion);
        fts5yymajor = fts5YYNOCODE;
      }else{
        while( fts5yypParser->fts5yytos >= fts5yypParser->fts5yystack

            && (fts5yyact = fts5yy_find_reduce_action(
                        fts5yypParser->fts5yytos->stateno,
                        fts5YYERRORSYMBOL)) > fts5YY_MAX_SHIFTREDUCE
        ){
          fts5yy_pop_parser_stack(fts5yypParser);
        }
        if( fts5yypParser->fts5yytos < fts5yypParser->fts5yystack || fts5yymajor==0 ){
          fts5yy_destructor(fts5yypParser,(fts5YYCODETYPE)fts5yymajor,&fts5yyminorunion);
          fts5yy_parse_failed(fts5yypParser);
#ifndef fts5YYNOERRORRECOVERY
................................................................................

    if( p->rc ){
      sqlite3Fts5IterClose((Fts5IndexIter*)pRet);
      pRet = 0;
      fts5CloseReader(p);
    }

    *ppIter = (Fts5IndexIter*)pRet;
    sqlite3Fts5BufferFree(&buf);
  }
  return fts5IndexReturn(p);
}

/*
** Return true if the iterator passed as the only argument is at EOF.
................................................................................
static void fts5SourceIdFunc(
  sqlite3_context *pCtx,          /* Function call context */
  int nArg,                       /* Number of args */
  sqlite3_value **apUnused        /* Function arguments */
){
  assert( nArg==0 );
  UNUSED_PARAM2(nArg, apUnused);
  sqlite3_result_text(pCtx, "fts5: 2018-12-01 12:34:55 bf8c1b2b7a5960c282e543b9c293686dccff272512d08865f4600fb58238b4f9", -1, SQLITE_TRANSIENT);
}

/*
** Return true if zName is the extension on one of the shadow tables used
** by this module.
*/
static int fts5ShadowName(const char *zName){
  static const char *azName[] = {
    "config", "content", "data", "docsize", "idx"
  };
  unsigned int i;
  for(i=0; i<sizeof(azName)/sizeof(azName[0]); i++){
    if( sqlite3_stricmp(zName, azName[i])==0 ) return 1;
  }
  return 0;
}

static int fts5Init(sqlite3 *db){
  static const sqlite3_module fts5Mod = {
    /* iVersion      */ 3,
    /* xCreate       */ fts5CreateMethod,
    /* xConnect      */ fts5ConnectMethod,
    /* xBestIndex    */ fts5BestIndexMethod,
    /* xDisconnect   */ fts5DisconnectMethod,
    /* xDestroy      */ fts5DestroyMethod,
    /* xOpen         */ fts5OpenMethod,
    /* xClose        */ fts5CloseMethod,
................................................................................
    /* xCommit       */ fts5CommitMethod,
    /* xRollback     */ fts5RollbackMethod,
    /* xFindFunction */ fts5FindFunctionMethod,
    /* xRename       */ fts5RenameMethod,
    /* xSavepoint    */ fts5SavepointMethod,
    /* xRelease      */ fts5ReleaseMethod,
    /* xRollbackTo   */ fts5RollbackToMethod,
    /* xShadowName   */ fts5ShadowName
  };

  int rc;
  Fts5Global *pGlobal = 0;

  pGlobal = (Fts5Global*)sqlite3_malloc(sizeof(Fts5Global));
  if( pGlobal==0 ){
................................................................................
static int fts5VocabInstanceNext(Fts5VocabCursor *pCsr){
  int eDetail = pCsr->pConfig->eDetail;
  int rc = SQLITE_OK;
  Fts5IndexIter *pIter = pCsr->pIter;
  i64 *pp = &pCsr->iInstPos;
  int *po = &pCsr->iInstOff;
  
  assert( sqlite3Fts5IterEof(pIter)==0 );
  assert( pCsr->bEof==0 );
  while( eDetail==FTS5_DETAIL_NONE
      || sqlite3Fts5PoslistNext64(pIter->pData, pIter->nData, po, pp) 
  ){
    pCsr->iInstPos = 0;
    pCsr->iInstOff = 0;

    rc = sqlite3Fts5IterNextScan(pCsr->pIter);
    if( rc==SQLITE_OK ){
      rc = fts5VocabInstanceNewTerm(pCsr);
      if( pCsr->bEof || eDetail==FTS5_DETAIL_NONE ) break;
    }
    if( rc ){
      pCsr->bEof = 1;
      break;
    }
  }

................................................................................
    /* xCommit       */ 0,
    /* xRollback     */ 0,
    /* xFindFunction */ 0,
    /* xRename       */ 0,
    /* xSavepoint    */ 0,
    /* xRelease      */ 0,
    /* xRollbackTo   */ 0,
    /* xShadowName   */ 0
  };
  void *p = (void*)pGlobal;

  return sqlite3_create_module_v2(db, "fts5vocab", &fts5Vocab, p, 0);
}




    
#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS5) */

/************** End of fts5.c ************************************************/
/************** Begin file stmt.c ********************************************/
................................................................................
  0,                         /* xCommit */
  0,                         /* xRollback */
  0,                         /* xFindMethod */
  0,                         /* xRename */
  0,                         /* xSavepoint */
  0,                         /* xRelease */
  0,                         /* xRollbackTo */
  0,                         /* xShadowName */
};

#endif /* SQLITE_OMIT_VIRTUALTABLE */

SQLITE_PRIVATE int sqlite3StmtVtabInit(sqlite3 *db){
  int rc = SQLITE_OK;
#ifndef SQLITE_OMIT_VIRTUALTABLE
................................................................................
#endif
  return rc;
}
#endif /* SQLITE_CORE */
#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB) */

/************** End of stmt.c ************************************************/
#if __LINE__!=220527
#undef SQLITE_SOURCE_ID
#define SQLITE_SOURCE_ID      "2018-12-01 12:34:55 bf8c1b2b7a5960c282e543b9c293686dccff272512d08865f4600fb58238alt2"
#endif
/* Return the source-id for this library */
SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; }
/************************** End of sqlite3.c ******************************/